megamat 其他存储设备 二手 出售

Lift system, Megamat, 170kg / shelf, approx. 6m high, – used - : Ex-site price: 14.500.- € (net), plus dismantling etc. Manufacturer: Megamat Type: Megalift 14448/25/6010 Year of Make: 2000 Max. load capacity per shelf: 170kg Max. total load capacity 18,000kg Dimensions per shelf: approx. 2.45m x approx. 0.80m Number of shelves: approx. 40 pieces Device dimensions: Height: approx. 6.01cm Width: 2.76m Depth: approx. 2.70m 3/N/PE 230/400V 10A, Fuse 16A Condition: good Available: immediately Location: BG-8800 Sliven

We offer LTG-TowerMax L 70.0-304-2448-816-7510 storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines are available Exterior Dimensions: Height 7510 mm Overall width 2700 mm Overall depth 2820 mm Total payload machine up to 2 x 35,000 kg 55 carriers for up to 304 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening at 950 mm above OKFF, then 915 mm high Engine power Vertical drive 5.2 kW / 400 Volt Horizontal drive 0.75 kW / 400 Volt Rocker motor 0.4 kW / 400 V Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

Lift system, Megamat FSE 7.1, approx. 6.91m high, min. 331kg / Shelf, Shelf: approx. 3.06m x 81cm – used - : Price ex location: 18.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat Type: FSE 7.1 3060/816-6910 Device number: 500002536 Year of Make: 2008 Permissible total load capacity: 70,000kg Load capacity per tray: at least 331kg (possibly also 414kg or 536kg, depending on which type of tray is installed, unfortunately cannot be clarified in advance). Number of shelves: approx. 50 pieces Shelf size: 3060 x 816mm Device dimensions: Width: approx. must be submitted later (width should be approx. 3,450mm) Depth: approx. must be submitted later (depth should be approx. 3,200mm) Height: approx. 6.91m 3/N/PE 230/400V, nominal operating current 17.8A, fuse supply line: 25A Condition: good Available: from approx. End o ...

We offer an LTG-TowerMax L 70.0-150-2448-1071-5885 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 5885 mm Overall width 2840 mm Installation depth 3500 mm Total payload machine up to 2 x 35,000 kg 60 carriers for up to 150 kg payload each in clear usable dimensions: W = 2448 mm T = 1071 mm Usable height up to 50 to 750 mm Start of the operating opening in 840 mm above OKFF, then 990 mm high Engine power Vertical drive 5.2 kW / 400 Volt Horizontal drive 0.75 kW / 400 Volt Rocker motor 0.4 kW / 400 V Colour scheme grey/grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer a paternoster LTG-TowerMax P 13.5-450-30-410-7935 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 7,935 mm Overall width 3,501 mm Installation depth 1,820 mm 30 carriers with a payload of 450 kg each in clear usable dimensions: H = 410 mm W = 2,850 mm T = 628 mm Chain jump 457 mm 60 galvanized intermediate floors for 150 kg each Total payload up to 13,500 kg Side table in 1000 mm above OKFF with NiRo worktop, 400 mm deep Colour scheme grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries

We offer a LTG-TowerMax L 18.0-170-2448-816-7510 storage lift with a completely new StoreControl L control system, which we have modernized. Exterior Dimensions: Height 7510 mm Overall width 2760 mm Overall depth 2650 mm Total payload machine up to 2 x 9,000 kg 40 carriers for up to 170 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high, lift door manually operated, Engine power Vertical drive 3.0 kW / 400 Volt Horizontal drive 0.37 kW / 400 Volt Colour scheme grey/grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer a paternoster LTG-TowerMax P 13.5-450-30-410-7935 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 7,935 mm Overall width 3,501 mm Installation depth 1,820 mm 30 carriers with a payload of 450 kg each in clear usable dimensions: H = 410 mm W = 2,850 mm T = 628 mm Chain jump 457 mm 60 galvanized intermediate floors for 150 kg each Total payload up to 13,500 kg Side table in 1000 mm above OKFF with NiRo worktop, 400 mm deep Colour scheme grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries

We offer an LTG-TowerMax L 18.0-250-1220-816-6010 storage lift with a completely new StoreControl L control system. Exterior Dimensions: Height 7510 mm Overall width 2760 mm Overall depth 2650 mm Total payload machine up to 2 x 9,000 kg 40 carriers for up to 170 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high, lift door manually operated, Engine power Vertical drive 3.0 kW / 400 Volt Horizontal drive 0.37 kW / 400 Volt Colour scheme grey/grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer a paternoster LTG-TowerMax P 12.6-300-42-215-6080 with a completely new StoreControl P control system. currently 2 identical machines available, Exterior Dimensions: Height 6,080 mm Overall width 3,350 mm Installation depth 1,500 mm 42 carriers with a payload of 300 kg each in clear usable dimensions: H = 215 mm W = 2,650 mm T = 520 mm Chain jump 254 mm Total payload up to 12,600 kg 1000 mm side table above OKFF with NiRo worktop, 300 mm deep Colour scheme beige/beige Motor power drive 1 x 5.4 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries

We offer an LTG-TowerMax L 70.0-331-2448-816-6210 storage system that we have modernized with a completely new StoreControl L control system. Exterior Dimensions: Overall height 6210 mm Overall width 2780 mm Installation depth 2908 mm Total payload machine up to 2 x 35,000 kg 50 carriers for up to 331 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 50 to 750 mm Start of the operating opening in 870 mm above OKFF, then 990 mm high Engine power Vertical drive 5.2 kW / 400 Volt Horizontal drive 0.75 kW / 400 Volt Rocker motor 0.4 kW / 400 V Colour scheme grey/orange, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer LTG-TowerMax L 40.0-340-2448-816-8760 storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines available Exterior Dimensions: Overall height 8760 mm Overall width 2778 mm Installation depth 2800 mm Total payload machine up to 2 x 20,000 kg 48 carriers for up to 340 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high, lift door manually operated, Engine power Vertical drive 3.0 kW / 400 Volt Horizontal drive 0.37 kW / 400 Volt Colour scheme grey/orange, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer a paternoster LTG-TowerMax P 15.7-628-25-360-6010 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 6,010 mm Overall width 3,501 mm Installation depth 1,820 mm 25 carriers with a payload of 300 kg each in clear usable dimensions: H = 360 mm W = 2,850 mm T = 628 mm Chain jump 406 mm 25 galvanized intermediate floors for 140 kg each Total payload up to 15,700 kg Side table in 1000 mm above OKFF with plastic worktop, 300 mm deep Colour scheme grey/grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries

Lift system, Megamat, shelf size: 2.24 x 0.61m, height approx. 4.26m, 360kg / shelf – used - : Price ex location: 15.950.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat / Kardex Year of Make: 2001 Type: Megalift 14436/50/4260 Device number: 70744 Max. load capacity per tray: 360kg Permissible total load: 40,000kg Device height: approx. 4.26m Width: approx. 2.45m Depth: approx. 2.45m Number of shelves approx. 60 pieces (still to be verified on Tuesday, 24.3.26) Dimensions shelves: approx. 2,248mm x 612mm 3/N/PE 230/400V, 12A, fuse supply cable 16A Condition: used Available: immediately Location: D-77728 Oppenau