holzher 锯床 二手 出售

Edge Abkappen thrower HolzHer Built in 1978 Weight approx. 220 kg L x W x H: 80 x 60 x 150 cm The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Edge glue machine HolzHer express 1437 Edge gluing, flush milling, caps flush milling with chamfer milling or RADIUS milling with sep. Aggregate Schwabelscheiben 2 mm and two units for chamfering or just milling milling ABS edge 2 additional units for RADIUS Hours of operation 1072.5 hours Masch. No. 721/9-203 L x W x H: 400 x 120 x 170 cm Weight approx. 900 kg Built in 1992 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Edge glue machine HolzHer express 1437 Glue, caps, flush milling, RADIUS milling / Beveling, scraping, cutting tool for rolling edges Total revision 10 years ago everything top Year of construction 1989 L x W x H: 500 x 120 x 170 cm Weight approx. 1800 kg The machine is in top shape, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

VERTICAL PANEL SAW type HOLZHER 1255 second hand machine volt. 380/50 max. working length mm.5300 max. working heigth mm.2200 CE mark : Yes

Flush milling machine HolzHer UF 362 Year of construction 1975 L x W x H: 150 x 80 x 160 cm Weight approx. 440 kg The machine is in good condition, ready for operation, Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

Flush milling machine HolzHer UF 362 with feed HolzHer 3 rolls Width max. 50 mm 2 motors 0.55 kW, 3 x 400 V, 50 Hz Year of construction 1984 Weight approx. 300 kg L x W x H: 120 x 100 x 130 cm The Fraese is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Max Machining Dimentions : 3200x1190x70 mm Min Machining Dimentions : 200x70x8 mm Drilling head 15 spindles include sawing unit in X direction Linear tool changers 6

Bench router Brand: Bäuerle Model: SFM Year of construction: 1968 Spindle diameter: 30mm Clockwise/counterclockwise rotation Feeder Brand: Holzher Model: ET 117

Corner milling machine, radius milling machine for machining the corner edges. Banding thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. pull-out workpiece support Dimensions: approx. 700 x 600 x 1300 mm Weight: Approx. 140 kg Suction nozzle: 70mm

HolzHer Cut 110 for sale. the complete computer has been exchanged and the software has been updated (2022) the guides of the material pusher and saw carriage have been exchanged (2023) A second blower for the air tables has been installed and an additional table has been added. mint condition dismantling is buyer 1 shift operation run and not really loaded. The machine is "freshly" made. Gear stems from the slider + guides have recently been replaced. Bearings and guides are new and computer is new. the whole rebuild cost 40k to 50k Technical data and description: Basic machine pressure beam saw Design: fence right Sawing cycle: away from fence Cutting length: 5850 mm Cutting width: 5850 mm Saw blades Main saw blade Ø 400 X 4,4 X 30 mm, Z72, FZ/TZ (not included!) TCT scoring saw blade Ø 180 x 4.4/5.4 x 30 mm conical (not included!) Cutting height Cutting height: 110 ...

Machine YOC 1992 Feed speed 8+16 m Solid wood edges, width up to 13 mm Rolls up to 3 mm Edge height max. 45 mm Aggregates: PE Hot Melt Glue Cartridge System Type 1906 1.9 kW Printing unit 1914 1 + 3 rolls Caps 1978, swivel 0-15 degrees Flush milling machineType 1942 2 x 0.6 kW Straight / chamfer up to 15 degrees Radius milling type 1943 2 x 0.6 kW Bevel 45 degrees Radius scraper blade type 1927 Buffing unit Length approx. 5,030 mm Width 1,760/1,605 mm Weight approx. 1,300 kg

Manufacturer: Holzher Vorschub 3 Rollen, Type: ET 117, Feeding by rollers: 3 Rollen, Technical data:: 0,75 , Speeds: 4, Deflection of the pendulum axes mm: ca.25 mm,

Cutting length: 2200 mm Cutting height: 30 mm automatic: nein ja/nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6195 mm, 2935 mm, 565 mm

TECHNICAL DATA: Working Range: X: 4600 mm Y: 2200 Maximum travel: X: 6195 mm Y: 2935 mm Z: 565 mm 5 axes Nesting table 01 Turret tool magazine with 18 slots 01 self-propelled tool changer 10 stops: stroke 150 mm 01 Vacuum pump: 250 m³ 01 Vacuum pump: 500 m³ 01 Laser Pointer Pen Drilling unit (6 kW): 18 spindles for vertical drilling (11+2 X-axis - 6 Y-axis) 02 Double-Sided Spindles for Horizontal Drilling – X-Axis 01 Double-Sided Spindles for Horizontal Drilling – Y-Axis 01 Saw blade unit – X-axis Electrospindle unit (13 kW): Equipped with HSK mount - liquid-cooled Software: CAMPUS V7 PLUS

Key data: 6200 mm, 1300 mm, 300 mm

SPECIFICATIONS: Workspace: X: 6200 mm Y: 1300 mm Z: 300 mm 08 Clamping Plates with Suction Cups 01 Side tool magazine Turret tool magazine with 18 compartments Side stops (3 right + 3 left) 01 Vacuum pump: 250 m³ Siemens control system 18 spindles for vertical drilling 02 Double-sided spindles for horizontal drilling - X-axis 01 Double-sided spindle for horizontal drilling - Y-axis 01 Electrospindle 12 kW HSK water-cooled coupling 4-axis cutting/milling unit

SPECIFICATIONS: Workpiece thickness: min. 6 mm - max. 45 mm Edge thickness: max. 3 mm Feed: 8 m/min COMPOSIZIONE: Gruppo rettifica Gruppo colla Gruppo pressore Gruppo intestatore doppio Gruppo raschia colla Gruppo refilatore Gruppo arrotondatore Gruppo raschiabordo Gruppo spazzole

Inv. Num. : 8874 Type: TRIATHLON 1487 V Producer: HOLZHER Created: 2003 Parameters: Binding height: 55 mm Machine dimensions: 7500 x 1300 x 1800 mm

Manufacturer: HOLZHER Model: 1255 Year of Manufacture: 2011 TECHNICAL DATA Weight: 920 kg Condition: Machine is fully functional Operating manual: Available Maximum cutting length: 6300 mm Maximum vertical cutting height: 2200 mm Maximum horizontal cutting height: 2200 mm Maximum workpiece thickness: 60 mm Horizontal feed height: cutting height Maximum horizontal feed height: 2040 mm Power supply: 400 V / 50 Hz Find more here - / Contact us at -

Details & Accessories:  ? Model: Holz-Her 1401  ? Suitable for plastic and solid wood edges  ? Machine stands on castors and is easy to move  ? Flush milling cutters and rounders included  ? Dimensions: approx. 2.6 m long, 90 cm wide, 1.25 m high  ? Robust construction, clean gluing

Key data: 3105 mm, 1560 mm, 325 mm

CNC nesting machine with a 2-stage milling unit with 11 KW power. Speed up to 24000 rpm. Tool holder HSK 63. Manual central lubrication unit, cooling unit "Cold Gun" for cooling the cutter with air. Spindle cooled by cooling water with an air conditioning unit. Clamping system with two Becker vacuum pumps â'250 m³ in a soundproofing cabinet. Automatic loading with a loading table and an extendable removal table. ( On request also possible without these tables for a reduced price ) Ride-on 8-fold magazine tool changer. Drilling unit with 14 spindles, four of which are horizontal spindles in the X and Y directions and a saw running in X direction. Integrated push-off unit with table cleaning. Control secured with a UPS. Software 1 x machine license, 1 x nesting program for free-form nesting.

This HOLZHER CUT 70 6110 panel saw was manufactured in 2009. It features a cutting size up to 3900 × 3900 mm, a maximum cutting height of 70 mm, and saw blade projection of 82 mm. The main sawing unit has a motor power of 11 kW and a blade diameter of 350 mm. It supports a saw carriage and pusher speed of 0–70 m/min. Consider the opportunity to buy this HOLZHER CUT 70 6110 panel saw. Contact us for more information.

Automatic edgebander machine HOLZHER STREAMER 1057 second hand machine working condition : Excellent , like new declaration of CE-conformity conformity marking CE mark with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , solid wood max.mm.6 for furniture, furnishings, kitchens, bathrooms, doors, panels and various Control HOLZ-HER KPL volt. 400/50 technical details: min. height of gluing panel mm.8 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 min. panel width mm.65 min. panel length mm.160 max.feed speed: 10 mt./min. support for large panels soundproof cabin glue system cartridge composition machine . units : 1.Magazine for single strips HOLZ-HER Edge magazine 1903 2.Premilling unit . HOLZ-HER Premilling unit FG 201 3.Trimming saw 2 motors . HOLZ-HER Trimming saw 1918 PNEU ...

This 4-axis HOLZHER Pro Master 7123-320K was manufactured in 2009. It features a large working area with X stroke of 3200 mm, Y stroke of 1445 mm, and Z stroke max of 325 mm. Equipped with six workpiece supports and automatic table setup in X and Y directions, it enhances productivity in complex woodworking tasks. If you are looking to get high-quality milling capabilities consider the HOLZHER Pro Master 7123-320K machine we have for sale. Contact us for more information.

Key data: 4300 mm

older Gebr. Panel saw incl. extraction Technical data ( data according to brochure ) Saw blade diameter 300 mm Cutting depth yes depending on material 70 / 80 mm Cutting length 4300 mm Weight approx. 900 kg Space requirement approx. 6000 x 1500 x Height 2900 mm

rolls: 4; speed: 2 - 30 m/min; number of speeds: 2 Getriebe, 2 Motor, 2 Zahnrad-wechsel (8);

This 3s HOLZHER dynestic 7507 was manufactured in 2017. It features an X-Axis stroke of 3100 mm or 4100 mm, a Y-Axis stroke of 1560 mm, and a Z-Axis stroke of 320 mm. The machine offers a vector speed of 110 m/min and a main spindle power ranging from 6 kW to 12 kW. If you are looking to get high-quality CNC wood machining capabilities, consider the HOLZHER dynestic 7507 machine we have for sale. Contact us for further details.

Holzher Edge Banding Machine 1421 Perfect Technical data: Banding thickness max mm 20 Banding height max mm 51 Thickness of roll material max mm 3 Workpiece length min mm 140 Workpiece width min mm 60 Glue System 1906 Cartridge Printing unit Milling unit Flush milling up to 20 mm chamfer milling Space requirement LxWxH mm 3150x1800x1375 Weight approx. kg 800 Year of manufacture 1989 Price: plus VAT Freely loaded