pos ボーリングミルとマシニングセンター 中古 販売のため

x-travel: 1050 mm y-travel: 530 mm z-travel: 630 mm Control: Heidenhain iTNC 530 spindle turning speed range: 10.000 U/min tool taper: ISO 40 table-size: 1150 x 560 mm table load: 0,7 t tool magazin:: 30 pcs. : total power requirement: 25 KvA weight of the machine ca.: 7,8 t dimensions of the machine ca.: 5,0 x 3,5 x 2,,9m m including current geometry protocol Includes infrared measuring probe Includes electric handwheel Includes chip conveyor Includes coolant system Includes internal coolant supply (20 bar) Includes indicator light Includes documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5-axis CNC machining center Type: POSmill H 800 U Manufacturer: POS Germany Year: 2017 Control: Heidenhain iTNC 530 X: 670 mm Y: 830 mm Z: 600 mm C: rotary table 360• A: tilt ±120 ° Max spindle speed: 18000 rpm Spindle cone: HSK-A63 Kessler center-cooled spindle Work probe: HSK 63 A Table diameter: 800 mm Tool magazine: 92 positions Including accessories Machine in good condition, under power Find more here - / Contact us at -

Manufacturer: POS Model: POSmill E1100 Year of Manufacture: 2015 Axis Travel - X-axis: 1,100 mm - Y-axis: 600 mm - Z-axis: 510 mm Control System - Control: Heidenhain iTNC 625 Tool Changer - Automatic tool changer: 40-position Electrical Data - Rated power: 300 kVA - Voltage (3-phase): 400V / 50 Hz - Fuse: 250 A Machine Weight - Net weight: 8,800 kg Find more here - / Contact us at -

x-travel: 1050 mm y-travel: 530 mm z-travel: 630 mm Control: Heidenhain TNC 620 table surface area: 1150 x 560 mm table load: kg tool taper: SK 40 spindle turning speed range: 10000 U/min max. torque on the spindle: Nm feed range: mm/min rapid power traverse in X-and Z direction: m/min rapid motion - y-axis: m/min spindle drive: kW total power requirement: 25 kVA weight of the machine ca.: 7,8 t dimensions of the machine ca.: m Working hours (date 10. February 2026): - Control on: 20811 h - Machine on: 13353 h - Programm cycle: 7412 h - Spindle hours : 5184 h Equipment: CNC control Heidenhain TNC 620 Electronic handwheel Heidenhain Tool measuring system Linear scales in all axes X/Y/Z Preparation for measuring probe 30-station tool changer Coolant equipment with paper band filter system Internal coolant supply through the spindle 20 bar Blown air through the spindle Chip conveyor Machine ...

Key data: 670 mm, 830 mm, 600 mm

Control: HEIDENHAIN ITNC 530 Travel: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm A +120° to -120°, C 360° Workspace Turntable diameter 800 mm, 9 T-slots, Table load 1200 kg, Tool changer Tool holder: HSK-A 63 96-fold tool changer Tool length max.: 300 mm Tool diameter max.: 75 mm Tool diameter with adjacent empty station max.: 125 mm Tool weight max.: 7 kg Tool change time: 3 s Rapid traverse and feed Express feed X Y Z 60 m/min, + max. speed A-axis 50 rpm C-axis 100 rpm Acceleration X Y Z max. 7 ms², General data Repeatability/positioning accuracy for new delivery 0.004 mm/0.008 mm (VDI/DGQ 3441) incl. tool holders with tools on the tool changer, Oil mist extraction IKZ Conveyor Nominal power 90 kVA Full load current 125 A max. current load 200 A 400 V 50 Hz

A vertical CNC 5-axis machining center POS is available. Travel X/Y/Z: 670mm/820mm/600mm, rotary table diameter: 800mm, max. table load: 1200kg, tool positions: 96, tool holder: HSK-63, speed: 18000rpm, A-axis: -100°/120°, C-axis: 360°, weight: approx. 20000kg, control: Heidenhain, operating hours: 22177h, spindle hours: 9601h. Including infrared probe, IKZ and Blum laser tool measurement. Documentation available. An on-site inspection is possible.

A vertical CNC 3-axis gantry machining center POS is available. Travel X/Y/Z: 2050mm/1050mm/780mm, table dimensions X/Y: 2200mm/1000mm, max. table load: 3000kg, tool holder: HSK-63, tool stations: 60, speed: 18000rpm, rapid traverse: 30m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 6500mm/4200mm/3800mm, weight: approx. 20000kg, control: Heidenhain, spindle hours: 10375h. Including infrared probe, IKZ and Blum tool measurement. Documentation available. An on-site inspection is possible.

A CNC vertical milling machine POS is available. Travel X/Y/Z: 1050mm/530mm/630mm, table dimensions X/Y: 1150mm/560mm, max. table load: 700kg, tool holder: SK40, tool stations: 30, speed: 10000rpm, feed rate: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 7600kg, control: Heidenhain. Documentation available. An on-site inspection is possible. The machine has a defect.

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m P O S A L U X (Switzerland) Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3 Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With s ...

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m : : : : : : : Horizontal 3-Spindle Fine Boring Machines Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With setting microscope and machine lamp. The data for this ad was  ...

: 0 : 0 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m PC board drilling m/c, single spindle, projektor. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PosMill H500U, a five-axis simultaneous machine, for sale. Year of construction 2018, the spindle has just over 5000 operating hours. Attached are pictures of the machine. The machine is currently in operation, but can be available immediately by arrangement. • Tool magazine for 60 tools • IKZ plus air

This 5-axis POSmill H 800 U was manufactured in 2018. It features a 670x830x600 mm travel range, a swivel range of -120 to 120 degrees, and a continuous 360-degree rotary table. Equipped with an 18,000 rpm milling spindle, 96-position tool changer, and Heidenhain iTNC530 control, this universal machining centre is ideal for complex machining tasks. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information about this machine.

This 5-axis POSmill H 500 U was manufactured in 2018, featuring a vertical machining center with X-620, Y-820, Z-650 travel dimensions, and a 60-space workshop. It includes internal coolant supply plus air cooling and is equipped with a Heidenhain iTNC-530 control for five-axis simultaneous milling. If you are looking to get high-quality milling capabilities consider the POSmill H 500 U machine we have for sale. Contact us for more information about this machine.

This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information.

This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details.

3D - CNC wire diameter 5-12 mm feeding length unlimited

This 3-axis POSmill E1100 was manufactured in 2011. It features a Heidenhain TNC 530 CNC control, a robust 1,100 mm X-axis travel, and a high-capacity 40-position automatic tool changer. The spindle supports speeds up to 10,000 rpm with ISO 40 tool holder and cooling. Additional features include a full enclosure, safety windows, and a 20 bar coolant system with chip management. If you are looking to get high-quality milling capabilities consider the POSmill E1100 machine we have for sale. Contact us for more information.

This 3-axis POSmill C 1050 was manufactured in 2014. It features a travel of 1050 mm in the X-axis, 530 mm in the Y-axis, and 630 mm in the Z-axis. The machine is equipped with a Heidenhain iTNC 530 control system and a tool changer that holds 30 tools. If you are looking to get high-quality machining capabilities, consider the POSmill C 1050 vertical machining centre we have for sale. Contact us for further details.