hans schreiner 旋盤 中古 販売のため

Drilling and milling machine Hans Schreiner ZAY7040G, built in 2009, very good condition, 1.5 kW, 800 mm table length, 240 mm table width, 300 kgPrices subject to change, errors, printing and typesetting errors excepted

The new Hans Schreiner infinitely variable turning lathe with leading spindle and feed rod and cross feed. Hardened and cut bed and gear wheels. Main spindle, tapered roller bearings and v-ledges. Camlock mount C4, top slide ratatable by 360°, tailstock adjustment +/- 5 mm for taper turning. Good metal-cutting performance, infinitely variable speed via electronic speed control with digital speed indicator. Incl. three-jaw chuck 160 mm and steady rest. Technical data: Center height 140mm Distance between centers 650 mm max. turning diameter 289 mm Spindle bore 38 mm Spindle cone MK 5 Clamping cone tailstock MK 3 Spindle speeds 50 - 1125 RPM and 100 to 2250 RPM Speeds 2 Main motor power 1,5 kW S6 Voltage 230 Volt Weight 230 kg Standard equipment: 3-jaw chuck 160 mm with changeable jaws for internal turning center point Optional equipment: 2 axis digita ...

Precision full gear, lead, pull, shift spindle lathe, bed and gear gears hardened and ground. Main spindle, tapered roller bearings and wedge bars plan/upper slide can be adjusted. Camlock mount C5, upper slide 360 rotatable. Tailstock adjustment +/- 5 mm for taper turning,High clamping capacity, DIN acceptance protocol, operating and spare parts list.Dial rings metricWith 3-axis Sino digital display and removable bedStandard equipment:Sino 3-axis digital displayTool Quick-change holder E

Hans Schreiner Metal LatheSuperut 1500 DigitalTechnical data:Center height 250 mm, center width 1500 mm, max. turning diameter 500 mm, spindle mount Camlock 8, hollow spindle 80 mm, tailstock cone MK5, spindle speed 24 to 1600 rpm, speeds 15, main motor output power 7.5 kW, max. diameter over face slide 300 mm, max. turning diameter i.d. bridge 630 mm, longitudinal feed 0.07 - 4 mm/revolution, transverse feed 0.02 - 1.35 mm/revolution, metr. Thread 0.5 - 28 mm pitch, inch thread 56 - 1 gears/inch, module thread module 0.5 - 3.5, thread diametrically pitch 56 - 8,

Exhibition machine! Standard equipment: SDS2-3L Sino 3-axis digital display. Base frame, halogen lamp, jaw American 160 mm, 4-jaw American 160 mm, face plate 250mm, 2 steady restsTechnical data:Tip height 160 mm, center width 900 mm, max. turning diameter 460 mm, spindle bore 38 mm, spindle cone MK5, spindle speed 65 to 1810 rpm, speeds 18, main motor output power 2 Kw S6 ( 1.5 Kw S1), weight 510 kgSymbol photoPrices subject to change, errors, printing and typesetting errors excepted

Lathe Hans Schreiner MDB-S900, YOC 2015, good condition, 1.5 kW , 900 mm center height, 165 mm center height, 65-1810 rpm, 500 kgPrices subject to change, errors, printing and typesetting errors excepted

Hans Schreiner drilling,- & milling machine with 90° pivoting gear head and variable speed for the commercial demand. With halogenlamp and coolant system. Technical data: Spindle cone MT 4 Motor output power S1 1,5 kW, 400 V Weight 310 kg Table dimensions 800 x 240 mm max. workpiece height 400 mm Speeds 50 - 530 and 530 - 2600 rpm Max. drilling capacity in steel 45 mm Worktable travel x=500mm, Y= 175 mm Optional equipment: Underframe with coolant tub Drill chuck, quick release chuck, milling cutter and tools

Hans Schreiner metal bandsaw with pivoting cutter arm, for the professional, with soft hydraulic for the correct pressure, electrical coolant system for all kind of metals, steels and Nirosta, quick clamping vice automatic cut stop, the semi-automatic control with preprogrammed cycle (user starts - clamping workpiece - cutting - saw arm resetting - unclamp workpiece) is optional at the MBS370SA for metal worker and workshops with small - and mass serial products. Strengthened frame for more stability. CE conform Technical Data: Motor: 400V,50Hz Reduce gear rate: 25:1 Wheel diameter: 380mm Blade size: 3160x27x0.9mm Blade speed: 34 or 68 m/min Cutting angle: 45°L, 30°L, 15°L, 0°, 15°R, 30°R, 45°R, 60°R Coolant pump: 400V, 50Hz, 3~, 25W Packing size: 1770x765x1120mm Weight: 365 kg

Demonstration machineYear of manufacture 2021Hans Schreiner metal band saw with swivel arm, for professionals, with soft hydraulics for the right cutting pressure, electric coolant system, for all metals, steels and stainless steel. Quick-release vise. Choice of automatic operation and manual operation can be easily switched. Automatic belt shutdown, price with base, reinforced frame for more stability, CE compliantTechnical data:Motor output power up to 1.9kW S6 (1.5kW S1)

300 t , Stand distance 1.800 , with rope passage , Installation height 1.000 , Table 1.800 x 1.000 , Ram 1.800 x 1.000 , Hub 600 , Rapid traverse to + From 414 mm/sec. , ram speed 10 - 50 mm/sec. , retraction force 380 kN , table cushion 800 kN , 90 kW , Weight 43.000 kg , ground-level installation

Key data: 10 t, 300 mm, 300 mm

more info on request

Manufacturer: Hans Schoen Model: NH 160 Year of Manufacture: 1988 rebuilt in 2016 The press is being sold without tools or spare parts. Technical Data Press force max.: 1,600 kN Main drive power: 30 kW Speeds Rapid advance from: 300 mm/sec Pressing speed: 18 mm/sec Rapid return: 300 mm/sec Strokes Max. stroke: 150 mm Max. daylight opening: 450 mm Table and Ram Dimensions Ram area: 730 × 560 mm Table area: 650 × 650 mm Openings Front vertical opening: 750 mm Side vertical opening: 250 mm Heights Table height above floor: 850 mm Table bore diameter: 150 mm Ram bore, Ø H7: 60 mm T-slots T-slots in table, DIN 650 H12 diagonal: 22 mm T-slots in ram, DIN 650 H12: 22 mm Two pieces, front to back Machine Dimensions Machine footprint approx.: 1,850 × 1,500 mm Machine height approx.: 2,850 mm Find more here - / Contact us at -

Fiber laser cutting machine Type: G 3015 MF Manufacturer: Hans Year: 2018 CNC control: Hans 701 Pro Exchange tables 3 m x 1.5 m X: 3050 mm Y: 1530 mm Z: 250 mm Laser source: IPG 3000 W Laser type: Fiber Laser head: Precitec Machine weight: 8,000 kg Max. workpiece weight: 750 kg Sheet metal cutting thickness: steel 15 mm stainless steel 10 mm aluminum 6 mm brass 5 mm Machine in good condition, under power Find more here - / Contact us at -

Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos

Steady Ø 310 mm

Steady Ø 145 mm

Rotary table for lathe chuck PAGUS diameter lathe chuck: max. Ø 200 mm bolt circle lathe chuck: 140 - 180 mm flange: Ø 130 mm table height: 70 mm 360° rotatable base plate: 290 x 220 mm used, tested ! Dimensions: 350 x 300 x 80 mm

Steady Ø 195 mm

Steady Ø 65 mm

Steady Ø 60 mm

Plan - Spiral - Lathe Chuck Diameter 190 mm Centrally adjustable base jaws Individually adjustable top jaws Through-hole 50 mm Bolt circle 176 mm Height 145 mm Weight 14.5 kg

Elma Troyan motor Type: T 100LA 8/4 CB B14F 130-481 380 volt 0,7/1,1 kW 700/1415 rpm

Leroy Somer motor Type: LS80 230/380 volt 1,5 kW 2840 rpm

TOS chuck 200 mm

220/380 volt 2865 rpm 2,2 kW

Freetech motor 0,8/1,1 kW 400 volt 1400/2800 rpm

Type: MI 70 FP F3 30/1 ratio

Carpanelli motor 230/400 volt - 0,25 kW - 1340 rpm 266/460 volt - 0,3 kW - 1600 rpm

AEG motor Type: AM100LS8/4 400V 0,7/1,3 kW 700/1380 rpm

Elprom motor Type: 112M4 B14F165 4 kW 230/400 volt 1420 rpm 30 kg

Efacec universal motors Type: BF5 132M 848 200/230/220/240 volt 2,2/3,3 kW

Type: SW/075T

Aja motor Type: 80/80/4 230 volt 0,8/1,2 kW 1400/2800 rpm

Aja motor Type: 80/80/4 230 volt 0,75/1,17 kW 1400/2800 rpm

Eldrive motor Type: EF 63B 4 1360 rpm

Jinshin motor Type: AEVF - frame: 112M 415 volt 3,7 kW 1430 rpm 40 kg

AEG motor Type: AM80ZCA4/2 230V 0,8/1,2 kW 1425/2800 rpm

Jinshin motor Type: 112M 3,7 kW 220/380V 1430/1720 rpm 45 kg

Leroy Somer Type: LS9013 2,2 kW 220/380V motor 1390/1740 rpm

Elco Cozzi motor Type: CN400 2,2 kW 220/380 volt 1400 rpm

Type: T 132H 4B 220/380V 7,5 kW 1445 rpm

Ansaldo motor Type: A1C 131 1A A000 7,5 kW 2900 rpm 220/380V

Type: C132MB 7,5 kW 380V - 16 amp

Type: T 132 M4 7,5 kW 1460 rpm For Labor 255 lathe

Type: DH 132S 8/4 2,2/3,3 kW 720/1440 rpm For Pinacho lathe SP 90 / 165

Type: AEEEF-PP008 5,5 kW 50 hz - 380V - 12,3 amp 1450 rpm 59 kg

Chucks 4 claw dia:1000 mm

Manufacturer: Mazak Model: Multiplex 620 Year of Manufacture: 1999 Type of Machine : CNC Turning Centre Auto Operation Hours: 75,830 h Machine Weight: 7,900 kg Find more here - / Contact us at -

Manufacturer: Mazak Model: Multiplex 6300Y Year of Manufacture: 2008 Type of Machine : Turning Center Auto Operation Hours: 83,250 h Machine Weight: 12,200 kg Find more here - / Contact us at -

Manufacturer: Mazak Model: Multiplex 6300 Year of Manufacture: 2005 Type of Machine : Turning Center Auto Operation Hours: 76,300 h Machine Weight: 12,000 kg Find more here - / Contact us at -

Lathes accessories, measuring equipment etc., contents of this cabinet page