boa シュレッダー 中古 販売のため

used shredder Manufacturer: BOA Type: ALLIGATOR 550 - 100 Year of construction 2017 Specifications: Drive power: 55 kW Throughput: - 1,5 t/h for fine adjustment, and - up to 6.0 t/h with coarse setting Filler opening: 1,120 Rotor speed: 1,500 rpm Operating voltage: 400 V/50 Hz Insulation class: IP 55 Weight: approx. 5,200 kg

used roll splitting machine Manufacturer: BOA (MBM) Type: RSM Year of construction: 1990 specifications: Roll width max.: approx. 1,800 mm Roll diameter max.: approx. 500 mm Drive power: 3 kW Drive via an electric motor with spindle with task table

Tot.kW 43 Volt 400V /50Hz

The Channel Baler BOA-45K is a high-capacity machine designed for compacting recyclable materials and waste into dense, manageable bales. Ideal for recycling facilities, waste management operations, and industrial applications, this robust baler efficiently processes paper, cardboard, plastics, and more, reducing material volume and optimizing storage and transportation. Technical data Type I / II / III Drive Pump Motor I: - 18.5 kW / 30 kW / 37 kW Pump Motor II: - 18.5 kW / - / - Oil Cooler with Air: - 0.75 kW / - / 0.75 kW Binding Device Vertical: - 1.1 kW / - / - Binding Device Horizontal: - 1.1 kW / - / - Mono Distributor: - 11 + 0.75 kW / - / - Total Power Consumption of the Press: - kVA Maximum Working Pressure: - 280 Bar Oil Tank Capacity: - 800 liters Hydraulic Oil: - ISO-46 Maximum Oil Temperature: - 70°C Bale Dimensions (Width): - Approx. 115 cm Bale ...

Used Roll Splitting Machine Manufacturer: BOA Type: RSM 40 t specifications: Roll width max.: approx. 2,600 mm Roller diameter max.: approx. 1,550 mm Drive power: 18.5 kW Cutting force: approx. 40 t Machine weight: approx. 5,500 kg including: Feed and take-off conveyor belt Drive power: 1.5 kW each Weight approx. 2,500 kg

Dosing bunker incl. dosing roller Manufacturer: BOA / HUBER Type: 1500 H KTH 5700/ RH Year of Make: 2010 Technical data for the feed hopper (chain belt conveyor): Manufacturer: BOA Type 1500 H KTH 5700 Year of construction 2010 Length of feed belt 5700 mm Incline 0° Usable width 1400 mm Technical data of the dosing drum: Manufacturer: Huber Technik Fördersysteme Type RH Dosing Drum Year of construction 2010 Drive power 4 kW

Used Chain Conveyor Belt Manufacturer: BOA Type: 1500 HG 29°HTK 11770 Year of Make: 1997 Technical data of the chain belt conveyor belt: Drive power 3 kW Length of feed belt 650 mm Length of climbing strap 10770 mm Inclination: 29° Usable width 1400 mm Height of drive axle above ground 4,260 mm Height of sidewall riser strap, inside 800 mm

We sell our PPK baler. the main pump and auxiliary pump were replaced this year 2024. Invoices are available. The press only pressed cardboard boxes. It can be demonstrated and put into operation at any time.

Technical Parameters - Impact Chamber Diameter: 1,200 mm (48") - Number of Screens: 8 units / Design in HARDOX 400 - Rotor Equipment: 1 – 3 pairs of acceleration elements (Hardox 450) - Rotor Speed: 1,000 – 1,400 rpm - Inlet Opening (WxL): Approx. 800 x 400 mm - Drive Type: Power belt (Kraftriemen) --------------------------------------------------------------- Electrical Specifications Standard Drive (75 kW @ 1,500 rpm) - Voltage: 400V / 500V - Rated Motor Current: 134 A (at 400V) / 107 A (at 500V) - Fuse Protection: 160 A (at 400V) / 125 A (at 500V) Optional Drive (with 90 kW Frequency Converter) - Voltage: 400V / 500V - Rated Motor Current: 161 A (at 400V) / 129 A (at 500V) - Fuse Protection: 200 A (at 400V) / 160 A (at 500V) Find more here - / Contact us at -

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

Edge strip shredder for edge trimming plastic films.

Headquarters. Edge stiffener extraction

The shredder breaks large bulky parts made of polystyrene and EPS and similar substances with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by about 65%. Thus, machine is ideally suited for use in industrial and craft companies as well as for the wholesale and retail trade with packaging material made of Styrofoam. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Screen 50 mm: approx. 23 m³/h Depending on the sieve set, a volume reduction of 3 : 1 takes place just by shredding your polystyrene residues. Custom-made products are available on request. VAT will be shown separately on the invoice. Shipping Germany-wide included, islands with surcharge. If you have any questions, please do not hesitate to contact us.

Specifications Cutting width: 5.8 x 50 mm Year of construction: 2003 Productivity: approx. 120 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s the security level: 3 Power supply: 400 V/4 kW

Specifications Cutting width: 3.8 x 50 mm Year of construction: 1997 Power supply: 400 V/ 4 kW Price: on request the safety step: DIN 66399 O-2/P-3/T-3/E-2/

ORDER NO. 7026 TECHNICAL SPECIFICATIONS - inlet width 740mm - inlet height 300mm - shaft width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2pcs - sieve dimensions 55x55mm - 4 toothed pulling shafts from the bottom - lower shaft motor 5,5kW - 3 toothed pulling shafts from above - upper shaft motor 5,5kW - belt feeder - feed belt length 4300mm - feed belt width 600mm - belt feed motor 2,2kW - main engine 90kW - reverse gear, - autorewers - overall dimensions of the machine length / width / height 4600x2350x1700mm - overall dimensions of the feeder length / width / height 4550x980x970mm - total weight about 11000kg – German production, – used chipper, very good condition Net price: 295900 PLN Net price: 66494 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

Cutting width: 5.8 mm Year of construction: 1993 Productivity: approx. 100 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 354 mm/s the safety standard DIN 66399: P2 Power supply: 400 V / 4 kW Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

32 solid single flails

With magnet

Hump Shredder PHSS 40/110 Specifications: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of Make: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: fast-running shredder shaft with counter comb Remark: The machine is in working condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Viewings are possible at any time by arrangement. We are also happy to carry out tests with your material on request for an expense allowance. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 h. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The  ...

used heavy duty paper pulper Manufacturer: PAAL Type: PAL-1800 Year of Make: 2007 Main parts of the machine: 1 drive housing with rotor and externally mounted motor 1 slot 1 Electrical control Weight of the machine approx.: 9,000 kg Capacity up to approx.: 35,000 kg/h Main drive power: 75 kW Total connected load: 82 kW Rated current: 155 A Operating voltage: 400 V, 50 Hz Filling width approx.: 1,800 mm Filling opening approx.: 1,800 x 1,972 mm incl.: 1 set of vibration dampers Functioning: The compact and, above all, large-piece paper types to be shredded must be conveyed into the discharge chute in the correct dosage using a conveyor belt. The rotor tears the material into pressable material and hurls it into the ejection hopper, which is open at the bottom and conveniently located above the conveyor belt leading to the press.  ...

Specifications Industrial shredders IDEAL 4104 Shredder Cutting width: 6 mm Power supply: 400 V/ 4 kW the safety step P2 DIN66399-1 Year of construction: 1993 Productivity: ok. 70 sheets (DIN A4, 70g/m²) Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Builder: GREEN TECHNIK Model: BS 750 PTO Engine: 66 kW (90 HP) Data: L. 5.700 mm x W. 1.920 mm x H. 2.900 mm Year: 2003 Hourly Production: 25 m³/h Shredding System: 64 HAMMER

used heavy duty paper pulper Manufacturer: PAAL Type: PAL-1800 Year of Make: 1990 Main parts of the machine: 1 drive housing with rotor and externally mounted motor 1 slot 1 Electrical control Weight of the machine approx.: 9,000 kg Capacity up to approx.: 35,000 kg/h Main drive power: 75 kW Total connected load: 78 kW Rated current: 150 A Operating voltage: 400 V, 50 Hz Filling width approx.: 1,800 mm Filling opening approx.: 1,800 x 1,972 mm incl.: 1 set of vibration dampers Functioning: The compact and, above all, large-piece paper types to be shredded must be conveyed into the discharge chute in the correct dosage using a conveyor belt. The rotor tears the material into pressable material and hurls it into the ejection hopper, which is open at the bottom and conveniently located above the conveyor belt leading to the press.  ...

Specifications Cutting width: 12mm, 9mm, 6mm, 3mm Year of construction: 1988-1989 Productivity: approx. 70 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s the security level: P1 - P2 Power supply: 380 V/2.2 kW Machine is fully functional, after technical inspection We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

used heavy duty paper pulper Manufacturer: PAAL Type: PAL-1800 Year of Make: 1996 Main parts of the machine: 1 drive housing with rotor and externally mounted motor 1 slot 1 Electrical control Weight of the machine approx.: 9,000 kg Capacity up to approx.: 35,000 kg/h Main drive power: 75 kW Total connected load: 82 kW Rated current: 162 A Operating voltage: 400 V, 50 Hz Filling width approx.: 1,800 mm Filling opening approx.: 1,800 x 1,972 mm incl.: 1 set of vibration dampers Functioning: The compact and, above all, large-piece paper types to be shredded must be conveyed into the discharge chute in the correct dosage using a conveyor belt. The rotor tears the material into pressable material and hurls it into the ejection hopper, which is open at the bottom and conveniently located above the conveyor belt leading to the press. T ...

The ASCO Shredder DS 900 is a powerful double shaft shredder for professional use in recycling, industry, waste disposal, and construction site logistics. With its robust construction, high drive power, and large filling opening, it is especially designed for shredding voluminous, heavy, or resistant materials. Whether timber, plastic, packaging, pallets, production residues, or green waste, Shredder DS 900 impresses with high throughput, controlled material shredding, and a durable, maintenance-friendly design.Two counter-rotating cutting shafts grip the material securely and shred it efficiently, even under difficult conditions. ASCO Shredder DS 900 is suitable for both stationary continuous operation as well as mobile use. The integrated control system offers intuitive operation, while the automatic reversing system ensures trouble-free operation in the event of overload or blocka ...

Specifications Cutting width: 3.8×48 mm Year of construction: 1993 Productivity: approx. 40 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: - the safety step: P3 Power supply: 400 V / 2.2 kW We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 3.8x50 mm Power supply: 400 V Year of construction: 1991 Price: on request the security level: P2

The ASCO DS 600 is a compact, powerful double-shaft shredder designed for the efficient shredding of a wide range of materials, making it ideal for recycling companies, businesses, municipalities, and construction site logistics. With its robust construction and maintenance-friendly design, it handles wood, green waste, plastics, foils, pallets, packaging material, and production residues reliably and evenly. The counter-rotating shafts and powerful cutting units ensure controlled shredding with minimal space requirements. Its sophisticated design allows it to be used as a stationary or mobile unit, offering maximum flexibility for daily operations. An integrated control system provides simple operation, and an automatic reversing system prevents blockages for trouble-free use. Generous access points make maintenance quick and user-friendly. Whether used as part of a larger processin ...

ASCO Shredder VS 900 is ideal for rapidly and efficiently breaking down different composite materials. Its polyhedral inner wall has unfolded edges that slow the material, while centrifugal forces push pieces outward into corners where they are shredded as rotation continues. Materials separate automatically due to their different specific masses, allowing, for example, plastic to divide from aluminum or aluminum from iron. A screening grid can define the final fraction size; although this reduces performance, it enables direct feeding into further processes. ASCO Shredder VS 900 uses counter-rotating tool chains in a closed system that minimizes emissions and ensures smooth operation, even under tough conditions. The gentle shredding process preserves material quality and supports easy sorting, separation, or composting. Tools can be changed within minutes to reduce downtime, and the ...

Axtor 6010 Category: Universal Shredder Manufacturer: Komptech Serial / reference number: 249037 Hours: 4 620 Power: 433kW/589 hp Weight: approx. 25 000 kg Emission class: Tier 4 Final / Stage IV Equipment and description: Overbelt magnet Remote control Advance device Shredder, chipper blades or cantilever chairs Material: good for green waste, bark, logs, splinters and wood waste 2 drum speeds 460 / 810 rpm (modification for cantilever chairs) Drum width 1,543 mm / Drum diameter 1,108 mm / 32 tools, blades Filling height: 2,800 mm / Screen baskets: 60×60, 80×80, 100×100, 125×125 etc. possible / other sizes can be produced Throughput depending on material and operator between 100 and 300 m3/h / Feed hopper over 4 m long / noise emission: 122 dB (A) Transport Dimensions: Length: 11,700mm; Height: 3,750mm; Width: 2,500mm; Towing eye: 50mm

Specifications Shredder Cutting width: 5.8 x 40 mm Year of construction: 1992 Power supply: 400 V / 7.5 kW the safety level P4 DIN 66399-1 F2 DIN 66399-1 pts. 5.2 Baler Maximum pressure: 9 tons Year of construction: 1992 Pressing force: 36 tons/m² Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power supply: 400 V/ 3.5 kW Bale binding: manual

Cutting width: 4 x 60 mm Year of construction: 2015 Productivity: approx. 35-40 Sheets (DIN A4, 70g/m²) Price: on request Security level: P3 Power supply: 380 V/ 2.2 kW Machine is fully functional, after technical supervision.

Specifications Cutting width: 7.5x40-80 mm Year of construction: 1999 Productivity: approx. 300 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 250 mm/s the safety step: 2+1 wg DIN 32757 P-1,O-1,T-2 wg. DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Pressing force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity: - Bale weight: - Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Wood shredders, plastic shredders, garbage shredders, two-shaft shredders, shredders, shredders used Manufacturer: I.S.V.E. Srl Type: 80-80 D Year of construction: 2003 Insertion approx. 1500 x 900 mm Insertion height approx. 1600 mm Drive 2x 9 kW 380 V Dimensions: approx. 2400 x 1800 x 2400 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Catalog number 6726 TECHNICAL DATA - 280x300mm loading hopper inlet - outlet for shredded wood fi 310mm - rotor working width 340mm - 22kW main engine - number of knives 6 pcs - dimensions length / width / height 1300x1150x1680mm - weight 720 kg ADVANTAGES - very good condition - used chipper Net price: PLN 19900 Net price: EUR 4422 Net price, calculated at the rate of 4.50 PLN / EUR (with greater fluctuations in the rate, the price may change)

Catalog No. 6825 TECHNICAL DATA - dimension of the loading hopper length/width 900x630mm - working width of the rotor 540mm - 7.5 kW motor - sieve diameter 20mm - knife size 40x40mm - number of knives 15 pcs - autoreverse - pressure drawer - dimensions length/width/height 2060x980x1580mm - weight 1008 kg ADVANTAGES – German production – unpainted - very good condition – used chipper Net price: PLN 37900 Net price: 8151 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Specifications Cutting width: 3.8×48 mm Productivity: approx. 40 sheets (A4, 70g/m²) Cutting speed:- Year of construction: 1989 Safety level: P3 Power supply: 400 V / 2.2 kW

ORDER NO. 7032 TECHNICAL SPECIFICATIONS - loading hopper inlet 1050x610mm - outlet for shredded wood fi 160mm - rotor working width 580mm - main engine 18,5kW - pump motor 0,75kW - number of knives 14pcs - knife size 30x30mm - sieve 15mm x 20mm - pressure drawer - electric autorewers - dimensions length / width / height 2000x1130x1530mm - weight 970kg ADVANTAGES – German production – autorewers – pressure drawer – very good condition – used chipper Net price: 47900 PLN Net price: 10764 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

Shredder HSM FA 500.3 - the paint renovation Specifications Cutting width: 10.5x40-76mm Productivity: approx. 600-650 sheets (DIN A4, 70g/m²) Cutting speed: 210mm/s Power supply: 400 V / 7.5 kW Year of construction: 2014 Price: on request the security level: P-2, O-2, T-2, E-2

ID3253 Doppstadt AK510 K year/Year of construction 2014 approx. 5210 hours/hours 29 t Shredder Shredder

Specifications Cutting width: 6 x 50 mm Year of construction: 2007-2009 Productivity: approx. 120 sheets (A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s Security level: P3 Power supply: 400 V/4 kW Machine is fully functional, after technical supervision.

ID3254 Franzoi TAZ280 year/Year of construction 2022 approx. 50 hours/hours 16.5 t Wood shredder, 2-shaft shredder Wood Shredder, 2 Shaft Shredder

Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW Safety level 2+1 according to DIN 32757 P-3, O-2, T-2 wg DIN66399 pts. 5.2 Productivity: ok. 300-500 sheets (A4, 70g/m²) Baler Maximum pressure: 9 tons Press force: 1.94 kg/cm² Productivity:- Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW

Specifications Cutting width: 7.5x40-80 mm mm Year of construction: 1999 Productivity: approx. 300 sheets (A4, 70g/m²) Price: on request Cutting speed: 250 mm/s Safety level: 2+1 wg DIN 32757 P-2,O-2,T-2 due to DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Press force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity:- Bale weight: - Price: on request

Specifications Cutting width: 3.8×48 mm Year of construction: 1992 Productivity: approx. 40 sheets (A4, 70g/m²) Price: on request Cutting speed:- Safety level: P3 Power supply: 400 V / 2.2 kW Machine is fully functional, after technical supervision.

Shredder with external feed, metal separator, etc. very good condition, many spare parts, immediately ready for use!

Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 11 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. Shipping time: immediately

For sale is a used ZENO shredder ZTLL 740x900 with the following features: Manufacturer: ZENO Model: ZTLL 740x900 Condition: good Dimensions set-up: 1.70 x 1.80 x 2.60 m last operation: August 2023 Previous use: EPS shredding Electrical data: Control cabinet is wired to the machine Motor power: 15kW Hydraulic ag: 0.25 kW Other: Spare perforated grille 11x17 available, separate stairs to the hopper available; Availability: immediately or by appointment

Builder: WILLIBALD Model: MINISHARK MS 3000 Engine: PERKINS 130 kW (180 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2017 Operative Hours: 3.900 h Hourly Production: 40 m³/h Shredding System: 18 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 9.000 kg Price: ON REQUEST!

Cardboard Shredder Find more here - / Contact us at -

ID2850 Pallmann year/Bauahr 2001 70 t Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers

For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg

- Brand: Silmisa - Model: MSA300-1260 (750)2. - With hydraulic pusher - Working width: 1260 mm - Engine: 75 hp (55 kw) - Year: 2007 - With electrical panel

ID3259 Doppstadt DW2560 BK Bison year/Year of construction 2003 approx. 8130 hours/hours 28 t Wood shredder, screening system new approx. 1200 hours ago, gearbox overhauled and shaft replaced approx. 1200 hours ago Wood shredder, screening plant new approx. 1200 hours ago, gearbox overhauled and shaft renewed approx. 1200 hours ago

Manufacturer: BHS Model: RBG06 Year of Manufacture: 2016 Type of Machine: Biomass Granulator 45 kW Find more here - / Contact us at -

Shredder UNTHA RS-60 Main shaft speed: 17.3 rpm Secondary shaft speed: 20.5 rpm Chopping discs width: 19 mm Drive power 2x30 kW 400 V, 50 Hz Screen perforation round: Ø 35 mm External dimensions of the cutting unit with drive: LxWxH: 2440x1470x1040 mm Total weight without base: approx. 7,500 kg Control cabinet with wiring : complete incl. 1xComplete second knife set after overhaul at Untha Incl. funnel and base clean machine, checked, always maintained, 1 owner !

Specifications Maximum pressure: 6 tons Press force: 2.5 kg/cm² Bale size: 600x400x500 mm Bale weight: approx. 50 kg Power connection: 400V / 2.2 kW Year of Make: 1995 Productivity: approx. 3 bales/hour Shredder Cutting width: 5.8 mm Power connection: 380 V/ 4 kW Year of Make: 1994 Safety level: DIN 66399-1, 5.2 P-3 /O-2/T-2/E-2/

Year 2004 17000 hours Very good condition Find more here - / Contact us at -

Builder: DOPPSTADT Model: AK 550 MEGA Engine: MERCEDES BENZ 317 kW (425 HP) Data: L. 9.200 mm x W. 2.500 mm x H. 2.950 mm (NO DISCHARGE BELT) Year: 1994 Hourly Production: 140 m³/h Shredding System: 36 HAMMER Fuel Tank: 300 L Weight: 21.000 kg

Specifications Cutting width: 3.8 x 40mm Productivity (80g/m²): 65-75 Power connection: 400 V / 2.2 kW Year of Make: 1993 the safety level DIN 66399: P-4 / O-3 / T-4 / F-1 / E-3

Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

Builder: WILLIBALD Model: MZA 4600 Engine: MAN 460 HP Data: L. 10.700 x W. 2.500 mm x H. 3.800 mm Year: 2003 Operative Hours: 7.750 h Hourly Production: 160 m³/h Shredding System: 48 HAMMER Rotor Data: D. 1.000 mm Fuel Tank: 450 L Weight: 16.000 kg NOT OVERHAULED !

Specifications Cutting width: 3.8 x 50 mm Year of Make: 1995 Power connection: 400 V/ 4 kW Price: on request Cutting speed: 354 mm/s Safety level: DIN 66399 O-2/P-3/T-3/E-2/ Cutting Type: Particle Cut Working width: 428 mm

This shredder for plastic waste is an essential tool for efficient recycling operations. Designed to handle various types of plastic, it offers reliable performance for reducing waste volume. Perfect for recycling facilities and manufacturing plants, this machine ensures effective plastic waste management. By integrating this equipment into your operations, you can enhance your sustainability efforts and streamline your recycling processes. Ideal for businesses aiming to improve their environmental impact, this solution for plastic waste is a must-have for modern recycling needs. Power: 22 kWVoltage: 380/660 VCurrent: 43.5/25 AFrequency: 50 HzSpeed: 1465 rpmDrive: VDE 0530Efficiency: cos 0.85Protection Class: ISO B Find more here - / Contact us at -

Specifications Cutting width: 4.5 x 40-80 mm Year of Make: 1994 Power connection: 400 V / 7.5 kW Price: on request the safety level DIN 66399: P3 DIN 66399-1 Machine is fully functional after technical supervision. The PREMIUM paint renovation - 470 EUR additional payment If you have any questions, please call us: +48 696 072 985

ID3648 Willibald SR5000 year/Bauahr 2001 approx. 7150 hours/hours 18 t Shredder for wood/green waste, magnetic separator Shredder for wood/green waste, magnetic separator

engine: diesel engine Cummins B6.7 - Stage 5 (AdBlue) power: approx. 209 kW / 280 hp shafts with 7/7 discs with 5 knives per discs & breaker bar with combs Mobile Hook Lift Frame wheel axle with drawbar hydraulic height adjustment for magnet hydraulic height adjustment for discharge belt water sprinkling system Monitoring Industry 4.0 weight: approx. 20 t

Manufacturer: EuRec Model: Z45E/60 Year of Manufacture: 1997 Power: 160 kW Operating Hours: 34,427 h Find more here - / Contact us at -

- With hydraulic pusher - Year: 2004 - Engine: 75 hp (55 kW) - Hopper dimensions: 1118 x 1990 mm - Cutting chamber: 1200 x 370 mm -Rotor: Orbit diameter: 370 mm Cutting speed: 1500 rpm Num. blades: 26 -52 (variable depending on the material to be treated) - With 3 sets of grille: Ø20, Ø30,Ø35 mm - Spare gearbox - Extra hopper 3000 x 2200 x 1600 (height) mm

Manufacturer: JENZ Model: NZ 1600 Type of Machine : waste wood shredder Find more here - / Contact us at -

Fully functional single-shaft wood shredder - currently in operation in our factory. Including electric control system (PLC), control cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Specifications Rotor working length: 1,500 mm Rotor diameter: 485 mm Engine: 55 KW Rotor speed: 100 RPM Rotor blades: 76 pieces concave / 35x35 mm 4-way rotatable cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg More details on request. Errors in the information excepted.

Manufacturer: Vecoplan Model: VAZ 1300 Year of Manufacture: 2011 Type of Machine : Shredder System Technical Details: - Year of Manufacture: 2011 - Operating Hours: 4,718 - Throughput (depending on material): - Shredding stage P-3: approx. 1,300 kg/h - Shredding stage P-4: approx. 1,000 kg/h Performance Data: - Permissible load lifting device: 600 kg - Max. lifting speed: approx. 6 m/min Shredding performance (depending on screen hole size): - With 15 mm screen: approx. 700–800 kg/h - With 20 mm screen: approx. 1,000 kg/h - With 30 mm screen: approx. 1,300 kg/h Conveyor capacity: - Scraper chain conveyor: approx. 25 m³/h - Scraper chain conveyor speed: approx. 18.8 m/min - Screw conveyor speed: approx. 4.5 m/min Condition: - Shredder is disassembled. - In photos, hopper is rotated 90° and placed loosely. - No discharge conveying system (scraper chain conveyor) included.  ...

Manufacturer: Lindner Model: Jupiter 3200 Year of Manufacture: 2008 Type of Machine : Pre Shredder Operating Hours : 54,000 h Throughput: ~60 t/h (domestic and commercial waste) Scope of Supply: - Shredder unit - Frequency converter - Control cabinet - Hydraulic unit - Recooler Find more here - / Contact us at -

Manufacturer: ERDWICH Model: M600/1-400 Year of Manufacture: :2022 Condition: As new / barely used Operating Hours: 5 hours Complete machine as shown in the pictures and drawings (including control unit/switch cabinet, feed area, and access platform) Find more here - / Contact us at -

Specifications Shredder Cutting width: 6 x 40 - 53 mm Year of manufacture: 2018 Power connection: 400 V / 50 Hz the safety level P-4/O-3/T-4/E-3/F-1 wg DIN 66399 Baler Maximum pressure: 4.4 tons Year of manufacture: 2018 Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power connection: 400 V/ 50 Hz If you have any questions, please call us: +48 696 072 985

ISVE COMBI 80/80S-GR700, including loading and extraction belts, sturdy supporting structure, TWIN SHAFT SHREDDER with, loading hopper, shredding chamber 800 x 800 mm., dust and liquid proof bearing cases, n.2 shafts on upper part, n.42 rotating knives with staggered hooks, n.2 planetary gearboxes, n.2 x 11 kw Siemens drives, automatic inversion on overcharge, GRANULATOR type C 40-70, soundproof cased, rotor wiudth 700 mm, rotor diam.400 mm, screen 40 mm, V-belt transmission, 22 kw drive, Electric cabinet wit S7-1200 Siemens PLC and touch screen display, Users manual, CE, electrical drawings, installed power - used power in work: about 60-65% : 44 kW, availability: immediate, working width: 800 mm., conditions: fully reconditioned, type: SHREDDER + GRANULATOR - 40 mm screen

used shredder Manufacturer: JENZ Type: AZ 660-168-EL-200kW Year of Make: 2009 Specifications: Insertion opening: approx. 4,500 (3,500 + 1,000) x 1,500 mm Drive power: 200 kW Capacity: approx. 200 m³/h Passage: approx. 660 mm Machine dimensions: approx. 11,250 x 8,000 length x width Machine weight: 18.2 t incl. frame, leak belt and overbelt magnet with bracket More information will follow. Machine will be available around February 2026.

Manufacturer: KOMPTECH Model: Crambo 5200 Year of Manufacture: 2015 Type of Machine : slow-speed shredder Operating hours: Approx. 14,000 hours Condition: - Used, good condition consistent with operating hours - Commercially operated - Regularly serviced and maintained (checkbook service) Chassis: - Trailer / 3-axle chassis, transportable - Road approved - TÜV valid until 03/2026 Engine and drive: - 328 kW / 460 hp diesel engine - CAT engine with mechanical drive - Machine weight approx. 27 t Applications: Suitable for roots, green waste, waste wood, stem wood, organic waste Equipment and features: - Overbelt magnet - Remote control - Armored shredding rollers - Rollers in very good condition with low wear - Fixed tools - Roller speed: 22 rpm / 34 rpm - Screen baskets: 220 mm x 140 mm - Standard paint finish - Throughput up to approx. 80 t/h - 3-axle running gear - Mechani ...

Manufacturer: Lindemann Model: Lubre 400t Year of Manufacture: 1990 Condition: good They have already done all service of the machine : - New hydraulic joystick controls for machine operation - New hydraulic oil - New hydraulic hoses and pipes - Hydraulic cylinders for rams - New cutting knives - Remote control for machine movements - New metal electrical enclosures - Find more here - / Contact us at -

Very good condition four-shaft shredder UNTHA RS-30 The machine is located in a container with a discharge belt/articulated belt as a chain belt conveyor. Easy to transport, can be moved with a hook dispenser. Easy access to the container, wide inspection door. A very nice facility in a well-kept condition First Hand Machine! Operating hours only: 4,307 h Year of manufacture: 07.2019 Power: 2 x 11 kW Cutting opening L x W 420 x 560 mm Knife width: 18 mm Built-in strainer: Ø mm Electrical cabinet : complete with control Funnel Discharge belt Containers

Manufacturer: Lindemann Model: LU800 / 8P A60 Year of Manufacture: 1994 Hours: 46,900 (currently still running) - Blade width 80x80 - Box length - Bed dimensions: 5.80 meters long / 2 meters wide - Drive power: 4 motors from Schoch GmbH No. 9140231/9, year 1994, 90 kW each - Lindemann Scissors Find more here - / Contact us at -

Manufacturer: Hammel Model: NZS 1000 Year of Manufacture: 2012 Operating hours: approximately 3,000 hours Undercarriage: crawler chassis (tracked mobile) It has two built-in magnets Find more here - / Contact us at -

Main Machine - ZERMA ZPS 2000 - Type: single shaft shredder (Einwellenshredder) - Drive power: 2 x 55 kW - Frequency converter: included (1 unit) Conveying Equipment Included - Discharge Belt Conveyor - Type: WF 4000 x 2500 x 580 - Drive: 1.5 kW - Inclined Belt Conveyor (mounted at shredder) - Belt width: 980 mm - Centre distance: 5000 mm - Belt type: PVC with cleats - Safety features: emergency stop rope and safety stop - Drive (right-hand): 1.5 kW Spiral Conveyor - Type: HS 450 NW 560 - Manufacturer: BULCOTECH - Drives: 0.75 kW / 11 kW / 5.5 kW / 11 kW Magnetic Separation - Drum Magnet (1 unit) - Overhead belt magnet: DM01.60 - Design: ferrite - Drive: 1.5 kW - For belt width: 600 mm Find more here - / Contact us at -

Manufacturer: HAAS Model: TYRON 1500 E Year of Manufacture: 2014 Machine Type : stationary electric twin shaft primary shredder Tool configuration: special reinforced tooling, 4-part with 7/6 discs per shaft Shaft speed: infinitely variable, approx. 0 to 32 rpm Counter-comb bar: included Raised tipping hopper: included Drive Unit - Drive power: 2 x 90 kW - Central lubrication: for all 4 main bearings Electrics / Control - Display: IFM display - Remote control: radio remote control included - Shredding programmes: 4 pre-set programmes (wood, waste, special, green waste) Discharge Conveyor - Discharge conveyor: included Find more here - / Contact us at -

We are selling a shredding and processing system for printer toner cartridges. The system is also suitable for processing small and medium-sized waste electrical and electronic equipment (WEEE).It was only in operation for five years and has already been professionally dismantled. This shredding and processing plant for toner cartridges was developed to efficiently separate valuable materials and reuse them in the recycling process. Through the use of high-performance machinery and intelligent separation technologies, this line enables the sustainable and economical recovery of metals and plastics from toner cartridges.The process consists of several stages: First, the modules are shredded, then sorted and finally separated in order to optimally process the different material fractions. Machines and processes of the plant. 1. Feed dispenser with big bag unloading station – length 5  ...

Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt