special used for sale

General2 Axes Universal Turning Machine - tool drive - C axis - Y axis; Control: DMG MORI Slimline Multi-Touch Working areaSwing diameter over guide ways650 mmSwing diameter over transverse guideway465 mmTurning diameter315 mmBar diameter max.80 mmSlide 1Longitudinal stroke600 mmTransverse stroke267 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y10 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)370 NmFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,18 x 2,66 x 1,94) mWeight approx.5800 KgTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWPre-setting Package CTX 450 ecolinePre-setting ...

For sale is a completely overhauled turbocharger from the manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul, so it is in mint condition. The internal reference number or SAP no. is 1114381o and the serial number is HT433332. The spare part number is 363927. Please check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. However, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The TPS57E01 model has a rated speed of 40200 rpm and is cooled by oil. The year of manufacture and the nominal power in kW are not available (nv). This turbocharger has an old design with a V-clamp on the exhaust side. As a special offer, we offer a special ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model RR131-14. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1107605o and the serial number is HT497310. The spare part number is 547404. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The model RR131-14 was manufactured in 2008, has a rated speed of 75000 rpm and is cooled by water. The nominal power in kW is not available (nv). Please note that there is a small damage to the  ...

Standard contactor control, mechanical transmission, hydraulics integrated in the machine incl. screw chip conveyor System has a bar guide and a guide stand on a separate pallet The system is loaded onto a truck with a special forklift or crane on a special date

90m Trapezoidal threaded spindle, steel, warehouse liquidation, TR30x6 bis TR10x3, , new -75% Single-start, rolled threaded spindles with trapezoidal thread according to DIN 103, in material C35/C45, in many sizes between TR10x3 to TR30x6. Special price These threaded spindles come from a stock liquidation, therefore we offer a bundle with spindles for an absolute special price. The current purchase price of these threaded spindles is € 2354 excl. VAT Our selling price is only 25% that is € 588 excl. VAT Attention: The photos do not correspond to the indicated quantity Scope of delivery: appr 180kg TR30x6 right: 3x780mm TR28x5 right: 1x1940mm, 1x1180mm TR26x5 right: 6x950mm, 1x850mm, TR26x5 left: 1x1900mm, 3x1000mm, TR24x5 right: 2x1570mm, 1x1700mm, 2x840mm, TR24x5 left: 2x2000mm, 1x1120mm, 1x840mm, TR22x5 right: 1x2000mm, 1x790mm TR20x4 right: 1x2000mm, 1x ...

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sander --------------------------------- basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated bracing for optimal vibration damping. Staggered grinding units with large dimensioned Belt drive drums for slip-free belt travel. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet belt run. All guides as a ball linear set on hardened and polished waves. Lasting precision thanks to protection against dust and dirt of the sphere linear sets. Contact roller and sanding pad in a balanced ratio to the grinding belt grain load. The large dimensioned drive drums guarantee the full tr ...

Series standard, direct gluing application, outrigger table for edge material, visual display of workpiece sequence, high frequency, wood chip container (crosscut saw), pneumatic milling (silhouette construction method, Hebrock system) , control center, conveyor chain with fixed special mit scraping special chain plates, upper pressure by double roller (ball bearings), cantilever (extendable to the front), automatic central lubrication (crosscut saw, angle milling tool), reservoir for hot melt (maintenance-free, Teflon coated)

In 2001 we acquired the license and production rights of Strausak. These rights include the entire 57 U / W conventional series as well as the CNC machines of the type U / W CNC in the tool grinding range 3 G / 4 G / 5 G as well as in the universal cylindrical grinding area, the 2 axes / 3 axes and 4 axes CNC machine and special machines 81 CNC. We have an extensive stock of spare parts. Our specialization is the general overhaul of these machines, as well as the new production of the above-mentioned machine types and the production of special machines.

Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center hole ...

Self-loading truck-mounted forklift CDD05 - Electric for 500kg This self-loading electric truck-mounted forklift is suitable as a truck-mounted forklift for delivery vehicles or for trucks without a loading ramp. It automatically loads itself to the next higher level. Thanks to this special pallet truck, power and nerves can be spared during loading and unloading - especially if there is no lifting platform. This model can also be used for pure transport work up to 500 kg. It is used in logistics, goods handling and is also designed for tough everyday industrial use. Special pallet trucks for everyday industrial work Self-loading and electric Load capacity of 500 kg with a fork length of 1050mm Maximum lifting height of 1300 mm NEW - Pick-up in 74722 Book

EAGLE eVision 1530 F3.0 AF fiber laser was manufactured in 2012 in Poland. The machine used in the cutting process of workpieces made of structural steel, stainless steel, aluminium and copper, guarantees the user excellent dimensional and shape precision during the cutting process. The low cutting edge and small heat-affected zone ensure that the geometry of the workpiece does not change during processing at the edges of the material. The EAGLE fibre laser uses the energy-efficient and trouble-free IPG YLS-3000 laser source to supply the PRECITEC cutting head with a high-quality 3 kW laser beam. The cutting head is equipped with overload and collision protection, which automatically shuts down all machine axis drives if a collision with the workpiece is detected. Thanks to the special head positioning system (HRS), a constant distance is maintained between the head and the sheet meta ...

x-travel: 400 mm y-travel: 250 mm z-travel: 400 mm tool taper: ISO 40 spindle turning speed range: 30-6300 / 20-4200 U/min feeds: 0 - 10.000 mm/min quill stroke: 90,0 mm table-size: 600 x 320 mm T-slots: 5 x 14 x 63 mm Control: TNC 410 CA spindle: ein ~ 126 Std. engine output: 11,0 kW weight: 1300 kg dimensions of the machine ca.: 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used () with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA workshop-oriented path controls, with Programming in easy-to-understand plain text dialog HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ...

Suitable for fully automatic grinding of all known tooth geometries (e.g. flat, alternating, trapezoidal tooth) from HM – circular saw blades on the face and back in one clamping. The free programming also allows the Machining of special tooth shapes. Accesories: Pallet loader with 3 stations,, Coolant system with total enclosure,, Integrated hollow tooth grinding device,, Software package W 1 alternate tooth,, Software package W 2 flat tooth,, Software package W 3 flat/trapezoidal tooth (with tooth height difference),, Software package W 4 flat / roof tooth (with tooth height difference),, Software package W 5 trapezoidal tooth,, Software package W 6 pointed on one side,, Software package W 7 tooth face processing,,, Software package W 8 free programming of special tooth forms,, automatic tool positioning axis, Automatic D-axis for machining chip breaker grooves, auto. fire extinguish ...

Vehicle data: Make: Clark, Type: Spicer 15.5HR 2741852 Transmission, Drive type: None, \Year of manufacture: 2007, Internal number: DIV1228, Mast data: Dimensions: Weight: 1000 kg, Battery & Charger: Description & Special equipment: Attachments: Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description: Overhauled

Vehicle data: Make: Dana, Type: Spicer 13,7 HR32312-632X, Drive type: None, \Year of construction: 0, Internal number: DIV1201-1, Mast data: Dimensions: Battery & charger: Description & special equipment: Attachments: Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description:

Vehicle data: Make: Linde, Type: Door LIN3944379144, Year of manufacture: 0, Internal number: DIV1344, Mast data: Dimensions: Battery & charger: Description & special equipment: Attachments: Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description:

Dries, reduces size and degasses materials in one step. For PE PP PET PS ABS PC PET PVC POLYLAMINATED, PULPER etc. Low maintenance costs No operator needed High ROI Huge output, heavy duty, made for 24/7 job 400 kw drive (260 kw in work) Italian technology and material quality standards. Output in a continuous flow The melted plastic can feed extruder directly with high energy saving, to be filtered and granulated, thus forming a complete, automatic line from scraps to granule We can provide the special extruder needed for the purpose. The line includes normally : buffer with extraction screws on supporting structure + extruder with motor, gearbox, pulpit control panel, + electric cabinet + strand matrix On separate request : cooling calander, cooling belt, conveyor belt to buffer, metal detector, square matrix with hydraulic pack (for special purposes) Post-sale assistance for spares, a ...

Contimeta SIAT SM116 - K11/70 Automatic carton sealer with automatic folding system and manual format adjustment Automatic machine for standard closing The carton sealer automatically folds the upper lid flaps by means of guide rails and a closing arm 2 motorized lateral conveyors with a width of 50 mm Transport speed 20 meters per minute Voltage 400V signal system for tape end or breakage special painting: frame color RAL 5003, covering safety cage RAL2001 Energy saving system Special design: 3 colored indicator lamp: green/orange/red for machine condition ok / tape almost empty / tape broken. Including potential free relay contacts for these signals Carton is only glued on top, not on bottom Carton dimensions L x W x H (mm): Min. 300 x 150 x 180, Max. 900 x 650 x 700 The SM11-6 processes between 600 and 1000 cartons per hour The guide rails are manually adjustable The height of the sea ...

Manufacturer: Biesse Bohrgetriebe, Special bore gearbox: Topfbandbeschlag, Stück Bohrgetriebe : 4, Grid 16 mm: 16, Special division X mm: yes, Befestigungsschrauben: yes, Quick-change lining: yes, Price per unit Euro: 400,

GEIBEL UND HOTZ FS 420 SC surface grinding machine manufactured in 2006 in Germany, is designed for single or serial grinding of workpieces. The machine, distinguished by its high performance and reliability, machines workpieces with a maximum weight of 150 kg with the circumference of grinding discs on a magnetic plate with holding force control and demagnetisation function. During the process, special sensors ensure that the grinding wheel is properly balanced, guaranteeing the highest precision and quality of machining. The GEIBEL & HOTZ FS 420 SC magnetic grinding machine uses an energy-efficient hydraulic system to drive the work table, which provides the exact oil flow required to move the table. The pump is equipped with special filters to remove ferromagnetic impurities and non-magnetic substances from the coolant, resulting in safe and trouble-free operation of the grinding m ...

Groove tool, special tool, groove tool, keyseating machine, slot wrench, slot wrench, slot wrench -Special tool for grooving blind holes -Guide recording -Grooving tool -Weight: 80 kg

Three lines hot-slitting T-shirt bag making machine, super high speed with fully automatic production.Special design servo-driven bag feeding is easy to operate.Equipped the multi auto alarms with automatic stop design for safety.Independent three lines temperature control.Equipped with multi auto tension control to maintain the stability of the film roll.High efficiency on production.Improved tension auto control to enhance the productivity.Special Rocking System design to avoid overlap of bags sealing lines from sticking.Film width (mm) Max. 1500 Bag Size (mm)  Width (mm) Max. 330 x 3Length (mm) Max. 700Max. Production Speed (cycles/min)  Max. 300

work piece width: 1500 mm plate thickness: 0,8 - 100 mm Brush width: 490 mm Brush diameter: 200 mm immersion travel: ca. 1.5 - 2.0 mm grinding speed: 200 - 1200 U/min band speed: 0,8 - 4.0 m/min work height max.: 950 mm Required air-pressure: 5.0 bar Air consumption: 80.0 l/min. number of brushing / polishing units: 8 Stück Control: NC Touch voltage: 400 V total power requirement: ca. 40.0 kW weight of the machine ca.: 6.100 kg. dimensions of the machine ca.: 3700 x 2750 x 2080 mm Well maintained condition with lots of accessories New price including accessories approx. 180.000 euros Special price on request Furnishing : - ERNST dry wide belt sanding machine TYP ATLAS ER ROTOR” Area of application: - Slag removal / deburring / edge rounding / finish grinding etc. - ERNST NC control including touch screen Control of the entire system graphically supported color terminal Adjustme ...

Automatic and programmable paperdriller Make Hang Model 260-00 Year Details Fully programmable paper driller With servo motors for all sorts of drilling patrons. suitable for Wire-O patrons and others stepless adjustable rotating speed of the heads, stepless adjustable speed of the up7down movements broken drill sensors automatic drill band automatic lubrications and chilling of the drills Drill bits 3-14 mm Special feature 1 it can also accept drill heads suitable for 30 mm diameter (not included) Special feature 2 drill distance from the side: 105 mm adjustable by a motor Operation transport belt feed, jogger, transport belt delivery Available Direct

Working area 1Longitudinal500 mmCross450 mmVertical400 mmGeneralUniversal milling machine, with compound Guideway construction New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataType of main driveAC Drive power (40% DC)20,3 kWDrive power (100% DC)14,5 kWSpeed range20 - 14000 rpmSpindle taperSK 40 DIN 69871 Feed rate longitudinal/transverse/vertical-30000/-30000/-30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minMiscellaneousClamping SystemDIN 69872 Floor space/WeightDimensions (L x W x H)4,15 x 3,98 x 2,75 mWeight approx.4500 KgSwivel Rotary Table, simultaneousSwivel Rotary Table for simultaneous machining swivel range -5 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Not available with NC-Divider EA 410!Table surface 630 x 500 mmCentre bore 30H6 mmMaximum load (table cen ...

Special offer: in line 4 col W&H 4 col flexopress for paper bagmachine or sheeter Unwinder 4 col printing unit cardan roller Special price for quick sale Machine offered subject to unsold wide offer of high quality used machines for attractive prices we also buy for stock / warehouses in EU over 20 years of experience in the industry

USED UNTHA SINGLE SHAFT SHREDDER 60 kw, Type LR 1400, rotor width 1.400 mm., speed 30/44, 2 x 22 kw drives, constructed in 2006, connected and running, Feed opening 1.400 x 1.050 mm, Constructors description: The strong throughput capacity of the LR1400 shredder is a result of the strong drive motors and the performance-oriented machine configuration. The configuration comprising a long rotor, a large perforated screen surface and optimised cutter geometry provides the performance which you require in your plant. High performance requires reliable machine operation, which we ensure with a full range of high-quality technological components., Thanks to the rotors special mounting, dust-protected bearings, tried and trusted gear damping and special cutting tools, the wood shredder is also very low maintenance and has a long service life. The intelligent drive control shuts the shredder mot ...

max. wheel diameter: 1200 mm gear width: 350 mm max. module: 16 min. module: 0,5 max. workpiece diameter: 1400 mm table diameter: 1200 mm table hole: 300 mm control: Siemens 840D Powerline total power requirement: 75 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 5x3x3,8 m Gleason-PFAUTER CNC gear shaping machine P 1200 S for the production of internally and externally cylindrical gears with internal and external teeth and other rolling profiles and moulds profiles and moulds that regularly occur on the cylindrical workpiece circumference and for the production of profiles in the single part process. Special version with hydraulic shaping head H1 SCOPE OF EQUIPMENT: - Basic machine P1200S, Siemens 840D Powerline (XP) - Hydraulic shaping head H1 - Signal light (3-colour) - Extended software for fault diagnosis - Telephone diagnosis system - Chip disposal through table b ...

sheet width: 3200 mm plate thickness: 4,0 mm distance between columns: 3300 mm daylight opening: OW 400 mm adjustment: UW 80 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN air pressure - required: 4.5 - 6.0 bar total power requirement: 9,8 kW oil volume: 160 l weight: 8500 kg range L-W-H: 4550 x 2530 x 2275 mm well-maintained machine with lots of special accessories () last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 Swivel control panel, front right - CNC controlled / electro-motorized back gauge pneumatic / lowerable material stop fingers Adjustment speed max. 250 mm/sec. Drive power 0.5 kw Sheet metal support table at the back - motorized lower beam adjustment (S axis) Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam Adjustment range max. 400 mm Lifting ...

pressure: 30.0 t punching cross-cut in cmm: 30 in 9.0 mm stroke: 0 - 28.0 mm column arm: 610 mm work height max.: 1010 mm no. of strokes: ca. 35 Hub/min oil volume: 35.0 l punching cross-cut in cmm: 270 mm² total power requirement: 4.0 kW weight of the machine ca.: 1200 kg. range L-W-H: 1400 x 700 x 1600 mm good condition () with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel Machine link: https://mhp.logotech.de ...

Key data: 500 mm, 400 mm, 300 mm

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

GeneralUniversal Turning Machines; Control: Siemens 840D SL Working areaSwing diameter over guide ways330 mmSwing diameter over transverse guideway260 mmTransverse stroke182,5 mmTurning diameter200 mmLongitudinal stroke455 mmClamping chuck diameter max.210 mmMain drive 1Type of main driveAC Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWTorque (100% DC)112 NmSpeed range- 5000 rpmWork spindleSpindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore74 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmFloor space/WeightDimensions (L x W x H)4,47 x 2,01 x 1,75 mWeight approx.3800 KgPROGRESSlinePROGRESSline Digital Cycle-time Graphic Rest Time Product Counter12 stations servo-tool turret reception VDI 3012 stations tool turret (servo) reception VDI 30, make Sauter Note: option available only for machine in V1 versionConnection for oil mist ext ...

Brand: PERKINS, Model: Series 3000, Emergency power system: 3 x 800 kVA, Year of construction: 2002, Current type and frequency: 50 Hz, Type designation: 9999 - special, Warranty: none, Terms of delivery: EXW Germany, Machine is ready for use and can be put into operation quickly at any time., fire: PERKINS, model: Series 3000, Emergency power system: 3 x 800kVA, Year of construction: 2002, Current type and frequency: 50 Hz, Type designation: 9999 - special, Warranty: none, Terms of delivery: EXW Germany

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

BERNARDO BSG 4080 TDC surface grinding machine was built in Austria in 2018. Designed for fully professional production applications, the machine machines workpieces placed on a magnetic plate or directly on the work table with the utmost precision and accuracy. The hydraulically driven work table with a large magnetic platen moves on hardened and ground guideways, which have been additionally coated with a special Turcite-B coating to increase abrasion resistance. The hydraulic drive, in the form of a separate hydraulic unit with heat exchanger, prevents vibration and overheating, and also ensures safe table feed even under heavy loads. Radial and axial forces are evenly distributed on special bearings without play in the grinding wheel spindle. The BERNARDO magnetic grinding machine weighs 3400 kg. Technical specifications of the magnetic surface grinding machine BERNARDO BSG 4080 T ...

DECKEL MAHO DMC 103 V CNC vertical machining center manufactured in Germany in 2005 is the ideal solution for serial or unit production. The machine efficiently machines heavy workpieces with a maximum weight of 500 kg using reliable components in the form of cutting tools and a high-speed spindle. The extremely stable construction made of high-quality raw materials effectively dampens any vibrations generated during milling, guaranteeing the highest possible process stability without any disruption. All this makes the DECKEL MAHO FAMOT DMC 103V CNC milling center the best choice for any production facility. The total weight of the machine is approximately 4500 kg. Technical specifications of the DECKEL MAHO DMC 103 V CNC milling machine - work table dimensions (L x W): 800 x 500 mm - feeds in the X/Y/Z axis: 630/500/500 mm - rapid traverse in X,Y,Z axis: 30000 mm/min - stepless a ...

roll diameter: 420 mm throat: 1000 mm workpiece height: 400 mm cutting speed: 25 - 1000 m/min saw band length: 4900-5050x3-20x0,9 mm work height max.: 1080 mm table-size: 670 x 670 mm Table tiltable: + 15 / - 30 Grad table adjustment:: 270 mm number of rolls: 3 Stück voltage: 380 V total power requirement: 4.0 kW weight of the machine ca.: 950 kg dimensions of the machine ca.: 2200 x 900 x 2140 mm Machine from a maintenance workshop very good condition with special accessories () Rarely used Furnishing: - robust electric-motor vertical band saw machine - Frequency-controlled, stepless saw band drive Infinitely adjustable via handwheel including digital speed display - manual, stepless table feed - Continuous height adjustment of the belt guide - IDEAL butt welding machine model BSS 016” including cutting shears and grinding device - manually swiveling support table - Machine bas ...

I - beam section - flat steel: 100 x 15 (d 500) mm I-beam section - upend: 50 x 10 (d 500) mm L-beam: 50 x 6.0 (d 600) mm round material: 35.0 (d 500) mm bar material dia. max.: 60 x 2.0 (d 1200 ) mm square material: 50x50x3 (d 1000) mm bending speed: 10.0 U/min roll diam. toproll: 165 mm bore: 40.0 mm range L-W-H: 560 x 1430 x 980 mm adjustment range:: OW 124 mm total power requirement: 1.85 kW weight: 273 kg from a chamber of crafts / little used () Manufacturer new price including accessories approx. 12.500 euros Special price on request Furnishing: - electro-hydraulic ring/profile bending machine - heavy and robust machine body - 2x driven rollers (MR2 model series) - divided roller segments - digital position display of the top roller (0.1 mm) - manual top roller adjustment - R/L running of the bending rollers - Bending speed 20% higher than machines of the same class - Shafts ma ...

plate thickness: 4 mm blade length: 200 mm table surface area: 1000 x 780 mm angle adjustable from - to: 30 - 140 Grad work height max.: 910 mm thickness at Niro-steel: 3 mm total power requirement: 4 kW weight of the machine ca.: 970 kg dimensions of the machine ca.: 1 x 1,66 x 1,47 m Electric 380 Volt: Foot switch: Squaring arm: 2 Stck. Hydraulic notching machine with adjustable angle from 30° to 140°, aut. cutting gap adjustment, hydr. clamping of the knives. As a rare special accessory, the machine has a lifting height and cutting length adjustment Digital display. The height adjustment works, but in the cutting length range it always cuts the full length of 200 mm. Since the length reduction option is almost never ordered when purchasing these machines, except for a specific special application, we did not have the electronic device repaired. You can see the function of the mach ...

pressure: 125 t punching cross-cut in cmm: Ø 39 in 24 mm stroke: 10 - 50 mm column arm: 510 mm work height max.: 1100 mm no. of strokes: 29 Hub/min punch diameter: max. Ø 130 x 7.0 mm oil volume: 103 l total power requirement: 11.0 kW weight of the machine ca.: 2350 kg. range L-W-H: 1750 x 1100 x 1910 mm good condition () New price without accessories approx. 27.500 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - User manual (PDF) Special accessories included: - NC controlled stop system - WIT ...

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sanding machine -------------------------------- Machine in checking process at the moment! Basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. All guides as a ball linear set on hardened and polished waves. Permanent precision thanks to dust and dirt protection the ball linear sets. Contact roller and sanding pad in a balanced ratio for sanding belt grain load. The la ...

Stainless steel switch cabinet, baying cabinet, 600x2300x600mm TS8452.600, Rittal, used Top Special price The current price of a similar product is € 3.280 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Stainless steel enclosure Nr.1, bayed enclosure, TS8452.600, Rittal, used-Top: - Baying cabinet width 600mm, height 2000mm, depth 600mm, - incl. cable routing shelves (raised floor) 200mm high - total height of enclosure + raised floor + adjustable feet = 2300mm - Material stainless steel 1.4301 - Incl. left side panel, rear panel and front door - Incl. mounting panel St galvanised (we can remove the mounting panel on request) - Incl. Rittal enclosure fan SK 3240.100 and limit switch - In ...

Stainless steel switch cabinet, baying cabinet, 800x2300x600mm TS8450.600, Rittal, used Top Special price The current price of a similar product is € 3.600 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Stainless steel switch cabinet no.2 or no 4 or no 5, bayed enclosure, TS8450.600, Rittal, used-Top: - Baying cabinet width 800mm, height 2000mm, depth 600mm, - incl. cable routing shelves (raised floor) 200mm high - total height of enclosure + raised floor + adjustable feet = 2300mm - Material stainless steel 1.4301 - Incl. rear panel and front door - Incl. mounting panel St galvanised (we can remove the mounting panel on request) - incl. 1 assembly panel St galvanised in the area of the tr ...

Stainless steel switch cabinet, baying cabinet, 800x2300x600mm TS8450.600, Rittal, used Top Special price The current price of a similar product is € 3.600 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Stainless steel enclosure Nr.3, bayed enclosure, TS8450.600, Rittal, used-Top: - Baying cabinet width 800mm, height 2000mm, depth 600mm, - incl. cable routing shelves (raised floor) 200mm high - total height of enclosure + raised floor + adjustable feet = 2300mm - Material stainless steel 1.4301 - Incl. right side panel, rear panel and front door - Incl. mounting panel St galvanised (we can remove the mounting panel on request) - incl. 1 assembly panel St galvanised in the area of the trans ...

ABL brand machine, model GTF WM. The watermelon line WML5 can be used to process watermelons. With the WML5 line, the watermelons are placed manually on a loading station that advances to the cutting station. The selected watermelons are pushed to a system that cuts the fruit into large slices (thickness to be determined). They are then picked up manually one by one by an operator and positioned on special shuttles. During transport inside the machine, the slices are selected according to their diameter by a special system. Determined by the size, a pick & place device removes them by placing them on the corresponding cutting unit and the diameter of the story producing cubes. The cubes and external waste are transported and separated on two underlying belts for further processing. The machine allows loading (manual and continuous) at a capacity of 4 - 5 fruits per minute. The machine c ...

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...

Pre- and post-heating coil, air heating element, DN160, 366260, LHE 160 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Unfortunately the type plate has come off - special price Dimplex - 366260 - LHE 160 IS Air heating element Electric pre- and post-heating. 1.5 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +60°C, air flow monitor for detecting the sma ...

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm no. of strokes: 15 Hub/min cutting angle: 2,0 ° back stop - adjustable: max. 1000 mm down holder: 14 Stück work height max.: 865 mm Column width: 3515 mm throat: 50.0 mm Control: D-Touch 7 oil volume: 200 l engine output: 15.0 kW voltage: 400 V weight: 7.650 kg range L-W-H: 4110 x 2200 x 2100 mm well-maintained / like new condition () New price ~ 45.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control (touchscreen) Anti-reflective, robust 7 color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back gauge Cutting length control via a ...

for sale by owner, special price for quick sale: used Titan duplex slitter rewinder 1200 mm in operation worked with film & paper unwinder diam. 1000 mm, shafts 76 & 152 mm rewinder: double shafts on rewinder: 76 mm film: youtu.be/T949u6BQRLU Special price for quick sale only- we need space Machine offered subject to unsold