special used for sale

Alexanderwerk cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 120 depth: 100 height: 130 Main motor power: 15 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

Completely made of special stainless steel 50-liter bowl made of stainless steel 2 mixing speeds 2 bowl speeds – fast and slow The main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine Machine dimensions in cm: width: 130 depth: 100 height: 120 Main motor power: 13 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minPalett changer with2 PalletMovement X / Y / Z560/560/660 mmMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)3,1 x 4,86 x 2,84 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWWeight approx.11100 Kg(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

KILIA cutter 50 liter Completely made of special stainless steel 50-liter bowl made of stainless steel 2 mixing speeds 2 bowl speeds – fast and slow The main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine Machine dimensions in cm: width: 130 depth: 100 height: 120 Main motor power: 17 kW

Specification IMPERIA F + feeder + Special batch Delivery · Nr. 1 (one) S/H IMPERIA F 120x165cm with electronic feeder and special batch delivery system, delivered, controlled and checked with 6 months warranty · Year of manufacture 2000 · with electronic feeder (no high pile) · Speed Approx. 1350 strokes per hour · min board thickness 400gr/m² · Corrugated board thickness max 7mm · pneumatic clutch- variable speed, · Equipped according to CE regulations · special suction cups with 50mm telescopic – pneumatically adjustable arms · SPS System · PICARD die cutting plate · micrometric adjustment of the pressure in addition to the standard one · special universal chase-mobile delivery table for conveying blanks, pneumatically controlled with automatic lowering device allowing to the opera ...

HIGH SPEED MULTIFORMAT POUCH MACHINE MATERIAL WIDTH :1200MM (MAX) MATERIAL DIA : 1000 MM (MAX) POUCH WIDTH : 50-650 MM POUCH LENGTH : 30-300 MM - (250 MM X 6 =1500 MM) MACHINE SPEED :180CPM /45 meters POWER : 220V, 3 PHASE, 50/60 HZ COLOR: : STAINLESS STEEL/White COMPLETE WITH: - SHAFTED UNWIND ST AND X 1 SET - UNWIND DIA. 800 MM WITH ROLL - 3" AIR SHAFT - 2.5 KW POWDER BRAKE WITH ROTARY ENCODER AND DANCER FOR TENSION CONTROL - .55KW DRIVE MOTOR NIP WITH INVERTER CONTROL FOR UNWIND UNIT FOR CONTINUOUS MOTI ON UNWINDING - LPC SENSOR FOR UNWIND MATERIAL FOR EDGE/LINE GUIDING - PHOTO SENSOR (NT-6) FOR PUNCHING AND ELECTRONIC TOUCHSCREEN CONTROL FOR POSITIONING X 1 SET - DANCER ROLLER DEVICE X 1 SETS - UNWIND STAND CAN BE MOVED LEFT/ RIGHT BY MANUAL - ADJUSTMENT FOR QUICK SETUPS Material folding device for gussets x 1 set. Material ...

Icma San Giorgio MCM/60V – 40D twin screw co-rotating extruder Mod. MCM/60V-40 D and down stream equipment High performances, intermeshing screw type for self cleaning characteristics. Screws Ø 60 mm Nominal L/D ratio 1:40 Max screw speed 300 rpm Barrel Modular design made up by 10 square-barrel sectors, each one 4 D long Barrel sectors made of LK3 nitrided steel Built-in water cooling circuit, simple construction and easy to maintain High efficiency heating system by cartridge heater Broached shaft made in special alloy brake/yield/torsion resistant Modular design Screw elements made of K 110 wear resistant steel Gear box Torque per screw shaft Nm. 1050 per each shaft Gear-ratio 4.28 : 1 Min. bearing lifetime at max. speed and motor power 20,000 working hours @ 160 bar Main A.C. motor Power applied to gearbox shafts KW 66 Speed rpm 1285 Water cooling unit  ...

max. wheel diameter: 1200 mm gear width: 1000 mm max. module: 25/36 Modul min. module: 1 Control: Siemens 840 D PowerLine table diameter: 1200 mm table load: 15 t total power requirement: kW weight of the machine ca.: 24 t dimensions of the machine ca.: 6,5 x 4 x 3,75 m Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - Power clamping device - 2 x fume separator make 3nine type EMMA - Chip scraper conveyor - Set of adjust ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWClamping System DIN ISO 7388-3-A, ADSpindle taper SK40Speed range - 20000 rpmTorque (40% DC) 130 NmTorque (100% DC) 86 NmSpecial equipmentSwivel rotary table capable of simultaneous operation Clamping surface D505 x 500 Swivel range -35 to +110°, 360° rotation axis including direct measuring systems B and C axis and level transformation Tool magazine 60 places SK40 Vertical chain with douSpecial equipmentWork area flushing Flush strips on the right side wall, Machine bed rear, cabin left and right front Working ...

Seydelmann cutter 65 liter Type: K 65 AC Completely made of special stainless steel 65-liter bowl made 2 knives speed - 1500 / 2950 2 bowl speeds – fast and slow Main cover made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: Width: 120 Depth: 100 Height: 130 Main motor power: 15 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

cut-off saw: 3 KW Spindle diameter: 50 mm Spindle length: 300 mm Number of tools: 3 St. connected load: 12 kW Haberkorn FZS 1 Studio tenoning and slotting machine Machine is still being checked ------------------------------------------------------ The compact tenoning and slotting machine for the unusual window constructions. If you have the highest demands on a tenoning and slotting machine and easiest handling, you can meet them with the FZS 1 Studio right choice. This single shaft tenoning machine with 3 automatic tool positions contributes to reducing downtimes through quick tool changes and a special swivel table for the production of studio windows and segments for Arched window. The studio table developed for this purpose has special features that... enable rational work. Precise angle degree display via rotary encoder with 1/10 degree display. display in the control panel. The s ...

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 45ft (13.7m) High Cube - 20ft (6m) office container - 20ft (6m) sanitary container Special Special versions such as Double Door, Flat or Open Top are always available at short notice. VISIT US Sightseeing is possible at any time and at short notice at our depot in DE-83395 Freilassing. For this we ask for a short telephone arrangement. KNOWLEDGE ABOUT SEECONTAINER Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 20mm waterproof plywood panels made  ...

PET-/ Can Compactor, Special Waste Baler BTS-MF60hd The BTS-MF60hd Cans_PET Special Waste Baler is ideal for compacting difficult and hard materials such as plastics, cans, PET and many more. The special waste baler impresses with its ease of use and large filling volume, finished bales can be easily removed with the automatic bale ejector. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Solid bales with bale weight up to 70 kg - Compacts a variety of different materials such as PET bottles, beverage and food cans, paint cans, cardboard and plastic - Cross strapping tying system to hold difficult material in a bale - Fully automated bale ejector, simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing  ...

20ft (6m) Standard Box Container 8'6", first trip (new) manufactured according to ISO 1496-1, made of weather-resistant Corten steel, planked inside with 28mm waterproof hardwood floor, with CSC approval (5 years validity) ALSPCONTAINER® PRIME SERVICE & QUALITY In our depot in Freilassing we always have new containers in different colours and finishes in stock. This ensures a short delivery time and the possibility to visit the containers before purchase. LOOK FOR YOUR CONTAINER US! PrimeQUALITY As a very special service, we offer the option to buy a flawless first-trip container. For this purpose, transport damage is professionally repaired and dirt is removed. State As good as new / First trip â with slight traces of usage due to a one-off sea voyage Color Gentian blue RAL 5010 or subject to availability TECHNICAL DATA - Dimensions on ...

Seydelmann cutter 120 liter, type K 120 AC Completely made of special stainless steel 120-liter bowl made of stainless steel Frequency speed regulator 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: left side Main cover is made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 190 depth: 150 height: 180 Main motor power: 40 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...

BTS-MF40 Cans_PET Special Waste Baler The BTS-MF40 Cans_PET Special Waste Baler with perforator is ideal for compacting difficult and hard materials such as beverage cans and PET bottles. The perforator compaction head pierces empty but also full bottles and cans so air and liquid can escape and in the same process material will be compacted. The Special Waste Baler impresses with its easy operation throughput and large filling volume. - Solid bales with bale weight up to 40 kg - Suitable for empty and full cans and PET bottles - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Perforator compaction head for piercing closed cans or PET bottles so air and liquids can escape - Roller guided head for ease of movement - CE-certified - Quality product Made in Europe Pressing force: 8 Ton Motor: 2.2 kW 16 Amp Power suppl ...

Kremer Grebe cutter 100 liter 100-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Unloading device: left side Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 190 depth: 130 height: 130 Main motor power: 22 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

0: ja, freitstehend Working width: 3000 mm 0: ja RUCHSER sash assembly table RU-BM-3000 --------------------------------------- The Ruchser sash fitting center enables efficient production based on economic aspects. Well thought-out down to the last detail, the system offers maximum ease of use. Important advantages for you: Modular system, the sash assembly table is put together according to your wishes and requirements Easy to use even for inexperienced workers Equipment demonstration machine, alternative / optional equipment on request! Pos. 1.0: Article no. : 0610000 RU-BM-3000, sash assembly table, for sashes up to max. 2500 mm in height with RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of the work platform manually adjustable. Holder for fitting scissors or fitting punch. 10 pieces swiveling commuters for hanging the Wing, completely pneumatically foldable  ...

used injection moulding machine 2-colours 2-K (45° arrangement of the 2nd unit) from clean room production Manufacturer: Arburg Type: 570C 2000-350/150 Control Selogica year of construction: 2007 Extras / Special features - Robot interface - 4x core pull - Technology level 2 and 3 (3 control pumps) - screw and barrel highly wear resistant - open nozzle - position controlled screw - Accumulator system f. fast injection - hydraulic accumulator - injection pressure increased for 2nd unit - Extension of tie bars of min. mold installation height to 500 mm Opening stroke unchanged - cores freely programmable - blow-out device - Interface for temperature control units - Control extension f. special signals - Interface coloring ( unit 1 u. 2 ) - interface vacuum valve B797ctcwes - additional heating control circuits for nozzle and nozzle tip - 12 electrical he ...

Ostas OPK 45 Premium - Profile & tube bending machine with premium equipment Standard equipment - Direct drive with gears -Steel frame - the two lower rollers are driven - the upper roller is idle - Hardened rollers - Shafts made of special steel material, hardened and ground - Horizontal and vertical working position - Roller shafts are hardened and ground made of special steel material - A set of hardened rollers - Adjustable guide rollers - Mobile control panel - Compliance with CE standards -User guide Included additional equipment -Digital readouts - 3-roller drive - Two-speed motor Optional equipment - Special rollers for tubes, profiles and angles - Angle bending rollersSpecification- Motor power: 0.75 + 1.5 kW - Roller Ø: 158 mm - Shaft Ø: 50 mm - Working speed: 4.5 m/min - Dimensions WxHxD: 775 x 1465 x 1035 mm - Weight: 420 kg

sheet width: 2050 mm plate thickness: 4,5 mm max. plate thickness: 4,0 mm anbiegen roll length: 2050 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1550 kg range L-W-H: 3220 x 1200 x 900 mm Exhibition machine - unused (!) Special price on request List manufacturer price: 21.400 euros Machine with special equipment Furnishing: - Electrically driven top and bottom rollers - Top roller can be swung out, with folding bearing - Conical bending device - asymmetrical roller arrangement - self-braking main motor - separate control and operating panel - Profile inserts in the rollers - Safety line - User manual in German - CE mark / declaration of conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital position display for the rear roller - 2x bending speeds The data for this ad was created with ModulMWS - the software sol ...

Compact bridge sawing machine with five CNC controlled axes - sawing / drilling / milling / grinding and polishing with a single machine. A universal machining centre for the processing of natural stone, e.g. granite, marble, travertine and basalt – artificial stone – ceramic slabs CNC control with 15" touch screen and color screen, the five interpolating axes allow for complex machining. Many software tools are included in the scope of delivery, for quick and easy programming (so-called "macros", i.e. pre-programmed editing programs) of – longitudinal and cross-sections – 45° oblique cuts – circular cuts – ellipse cuts – arc cuts – software for drilling – special software for machining kitchen worktops – special software for ceramic processing (tiles + slabs) – special software for engraving work. Remote control console for the control of manual movements, f ...

Textile cleaning machine Multimatic PIUMA N 320 with distillation module VD 160 Manufacturer: Multimatic ILSA Deutschland GmbH & Co. KG, 49324 Melle, Germany Year of Make: 2021 Description Drum volume: 320 liters Filling quantity: 16 kg with a filling factor of 1:20 Easily accessible, compact machine platform Basic machine/basic module (W x D x H in mm): 1076 x 1990 x 2140 (990 x 1990 x 1980 mm simply dismantled) Machine structure: - High-spinning, free-swinging drum unit - Resonating tank assembly, consisting of 2 stainless steel tanks with a volume of 80 and 90 litres, to compensate for the kinetic energy during spin-up and to prevent dirt deposits - Tank bottom with double slope - High-quality Oberwacht spring-damper system to minimise dynamic loads - Special stainless steel drum with a diameter of 850 mm and high-torque drum drive - Intelligent PLC-assisted spi ...

Food extrusion product coating, drying and cooling line SCHAAF TECHNOLOGIE GMBH TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm TYPE 284 DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures processing of extremely sticky coated extrudates. Unlike the conve ...

Total Volume : 745 liter Batch size : 65 – 500 liter It is useful for hair dye, cream etc in cosmetic industry. It is an automatic multi-purpose mixer with 500 liter capacity. it is a complex machine that offers a special solution for manufacturers who want to manufacture uniform with special homogenizer, special design scrapers and high speed. The maintenance has been done and no problem in operation. The machine has never used new original spare parts with a value of over eur 20,000. spare parts; packing felt vacuum ball mixer tungsten carbide shaft bearings oring and gaskets bearing sets boiler scrapers triger belt set selenoid valve thermocouple sensor kit plc eeprom card vacuum module temperature manometer tank replacement of gliser / also, the system will be given with all the equipment and spare boilers including the photo. mil handle miscellaneo ...

Seydelmann cutter 120 liter Type: K 120 AC 8 Completely made of special stainless steel 120-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: left side The main cover is made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine Knives 6 pieces Dimensions: 190x150x180cm Main motor power: 40 kW Voltage: 400 V, 50 Hz Year of production: 2008

groove width: 70 mm drawing length: 300 mm working speed: 0-25 m/min Control: SIEMENS OP 17 workpiece weight: 25.000 kg return speed: 40 m/min dimensions of the machine ca.: 1,2x2,3x1,65 m drawing capacity: 21.000 N total power requirement: 5 kW Machine does not need a foundation, accessories Products / Grooving machines - Polymat 25/32/70/100/125 CNC The machine series for medium and large quantities with great flexibility and many options. The universally applicable machines in the CNC series are used for the production of production of standard grooves as well as for the machining of special grooves. special grooves. The up to four controlled axes allow the production of workpieces with with helical grooves, grooves in blind holes and other special applications. CNC control, SIEMENS OP 17, innovative, because: 4-axis -> expandable Program memory Axis interpolation worldwide service mu ...

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

Automatic bar loading magazine for single spindle automatic lathe / short lathe, new TEST the new DB-EVO bar loader 4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request) very high speeds even with profile material Manufacturer: Giovanni Cucchi Machine type: Automatic bar loading magazine for single-spindle / short turning Type: DB-EVO Design: Surface loading magazine or bundle loading magazine diameter range: 20-110mm DB-EVO at a glance: Scope of delivery and optionally orderable functions: - oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional - Monitoring and fault diagnosis (touch screen) - Surface magazine - Bundles and other variants possible - automatic loading of short bars - Trays for tools - low power consumption (start/stop function) - Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6. ...

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 20ft (6m) office container - 20ft (6m) sanitary container Special versions such as Double Door, Flat or Open Top are always available at short notice. Sightseeing is possible at any time and at short notice, for this we ask for a short telephone arrangement. Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof hardwood floor. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can theref ...

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

1 roller movement: Machines No.: 0018 Drawing No.: 242 002 54 Roller speed length: 4 m Roll width: 300 mm Mounted with ball bearing rollers on profilesteel frames Drive by special gear motor Precision roller chain Spring-loaded length compensation 1 pull-off cross conveyor: Machine number: 0037 Drawing number: 147 501 46 Axle distance: 6.5 m Rank: 3 3/4" chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross conveyor: Machines No.: 0038 Drawing No.: 147 501 47 Axle distance: 6.5 m Rank: 3 3/4" Chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross c ...

Roller splitter type RGS 25, RGS 35 and RGS 50 For the efficient recycling of residual and scrap rolls from the paper/packaging industry, printing companies, etc. The hydraulic roller splitter is suitable for cutting paper, cardboard and plastic foil rolls/balls, as well as for aluminium foil and is mainly used for the recycling of residual and scrap rollers, as well as for the crushing of start-up clumps. The roller cutters are available in various performances in terms of cutting force and roller dimensions. Rolls with a maximum width of 3,000mm and a diameter of 1,200mm can be processed. Special models for processing rolls with particularly large dimensions are also available. As an experience, we offer special material feeding techniques, as well as automated feeding and removal techniques. With regard to personal/occupational protection, we offer optional prot ...

Garage Schalungensanlagen Rothmund / tar we offer two complete used garage formwork The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). A. garage formwork 2 Rothmund / tar and ueberarbeitet in 2004 by LAIER 5.62 X 2.78 m length and 2.95 x 6 as a fixed size, including ancillary units with spread rungsanlage to the higher level (B). Garage formwork 1 Rothmund special machines For 6 m, 6.5 m and 7 m garages, width 2.95 m set consisting of: 1.1 Set base frame, 2.1 retractable core with extension length adjustment 3.1 rear rollers wall 4.1 front rollers wall 5.2 Longitudinal walls 6.1 Set scope bracket 7.1 Set formwork for electric gate 8.1 Set hydraulic tensioner (down, sideways) 9.1 Set hydraulic system with control panel 10.1 electrical control cabinet Shaker drive 11 incl. auxiliaries (C). 15 Pallets for precast ga ...

Engine power: 400V 2 PS S1 Planing width 260 / 300 mm Drum: 3-Tersamesserwelle Dressing table length: 1040 mm / 1200 mm Clearance height: 3-200 mm Formatschiebetisch: 1070mm be hemline Cutting height: 80 mm Saw-45 ° 90 ° swivel Milling machine 90 ° starr Blower rpm: Speed of 4200-6300 rpm or 5000-7500 RPM G & STÜ 5500027 260mm planing width! SPECIAL PRICE NET OF 3599.- G & STÜ 5500030 300mm planing width! SPECIAL PRICE NET OF 3999,-

OPERATING POSITION... HORIZONTAL PUMP SET SIZE . 90.1 CONSERVATION SILICONE OIL ROTOR . . . . . . . . . . . . . 1.2436 U80 STATOR . . . . . . . . . . . . . NBR-LM 778/60-ST MOUNT RINGS... 1.4571 TENSION ROD MATERIAL... 1.4301 JOINT MATERIAL... . V4A JOINT DESIGN... . CARDAN (PW) ABGEDIC. CUFF... NBR TISSUE JOINT OIL... White oil EXTRA SHAFT SEAL... SPECIAL VERSION SUCTION CASING... V4A SUCTION... DN100/PN16-V2A SUCTION LOCATION TOP GASKET... NBR OUTLET... . DN100/PN16-V2A DRIVE flange [mm]... 250 Drive shaft [mm] 40 SHAFT MATERIAL... V2A LINEUP SPECIAL VERSION PUMP PROTECTION... WITHOUT ROTATION LINKS PUMP IDENTIFICATION... CHEEKS NAMEPLATE... STANDARD SURFACE PROTECTION... STANDARD C1 FARBE . . . . . . . . . . . . . RAL 9006 WEIßALU DRIVE... STIRNRADGETR.MOTOR DRIVE GEARBOX TYPE SEW RF77 ENGINE TYPE... DRE100LC4 PERFORMANCE... 3.0 KW SPEED at 50 Hz [ ...

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Wheels shot 38 mm. For more details please call us. We carry special accessories in our program. We repair and repaired on the spot and make complete engine overhauls Special grinding machines

? The machine is built in 2 construction works: 1250 x 2500 and 1500 x 3000. ? The IPG fiber laser resonator is available for this model with the power values 500 W, 1000 W, 1500 W and 2000 W. ? The beam is guided by a flexible light guide, i.e. cleaning and alignment of the mirror optics are not required. ? The HP SSL high-performance cutting head is very easy to set up. ? High cutting efficiency with low operating costs; Power consumption of only 13 kW for a 1-kW fiber laser source. ? The heavy machine frame and the high-stiff bruecke are designed as a tension-free welded construction and carefully manufactured. ? The interchangeable table with hydraulic lifting adaptation takes over the loading and removal of cut parts during the ongoing cutting process - re-training with further automation functions is possible. ? The working area is fully clad and illuminated, and the cutting ...

Important and outstanding design features of the RaptorX-SL with steel substructure /RaptorX-SL3200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the high-adjustable working area (read-through he under bridge variable : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special coarseness up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm hei ...

Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...

Important and outstanding design features of the RaptorX-SL CNC Fraes machine / CNC-Fraese with steel substructure / RaptorX-SL2200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (through-shoehe under bridge : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special larges up to 17 500 mm ( on one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to  ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm ( at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ), wherein this is rather unpromising due to the mostly applied layer structure  ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm long Fraeser ), which is usually applied layer construction for large volume components in 3D mold ma ...

GranitoGrav Photo-Gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, plaques, tiles, glass, mirror edible glass ... Just download your black and white or color photo as a template into the special module of the CAD-CAM software ConstruCAM-3D, then enter the output of the wuenengeed size and can then calculate the fraeswege. This file is then opened in the machine software and sent to the machine accordingly, ready ! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical timeandand creates your data with the CNC machine and the GranitoGrav photo module Grinding pins cost about 3- 4 euros per piece and hold ...

- Hobelbreite 50 - 400 mm - Hobelhöhe 10 - 300 mm - stufenloser Vorschub 5-25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - 6 Spindeln - untere Welle min. / max. Werkzeug FI 160 /180 mm - rechte Welle min. / max. Werkzeug FI 160 /230 mm - linke Welle min. / max. Werkzeug FI 160 /230 mm - obere Welle min. / max. Werkzeug FI 160 /230 mm - 2. obere Welle min. / max. Werkzeug FI 160 /230 mm - untere Welle min. / max. Werkzeug FI 160 /230 mm -max. Sägeblattdurchmesser 2. obere Welle 300 mm Motorleistung: 1. unten 15,0 kW 2. rechte 11,0 kW 3. linke 11,0 kW 4. oben 15,0 kW 5. oben 15,0 kW 6. unten 15,0 kW - Motor Vorschub 11,0 kW - Motor Höhenverstellung 1,5 kW - Gesamtanschluss 94,5 kW - Jointer obere Wellen und unter Welle - horizontale Wellen mit Gegenlager / Hydrospannung - obere Welle elektrisch verstellbar mit Vorschubsystem mit Digitaler Anzeige - linke Welle elektrisch verstellb ...