screwdriver used for sale

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 7 St. Tool trolley with 8 drawers, 6 of which contain tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and detectable. - The tool included is made of chrome vanadium steel. + Drawer 1: - 1/4 inches: 13 nuts from 4mm to 14mm, 11 long nuts 4mm - 13mm Ratchet, universal joint, extension. - 3/8 inches: 10 nuts from 10mm to 19mm, 11 long nuts from 8mm to 19mm Ratchet, universal joint, extension. - 1/2 inches: 17 nuts from 10mm to 30mm, 9 long nuts from 10mm to 24mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4 inch ratchet: Torx nuts without bore T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with bore TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Imbus nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH ...

Description: Lot consisting of: - Screwdriver with self-locking chuck -Screwdriver with Quick Coupling - Grinder - Impact screwdriver - Battery charger - Batteries - Carrying case Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 10 kg

Description: Lot consisting of: - Screwdriver with self-locking chuck -Screwdriver with Quick Coupling - Grinder - Impact screwdriver - Battery charger - Batteries - Carrying case Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 10 kg

The machine is already in Poland with us on site. , a drilling rig from the well-known Swedish brand Sandvik. Used for rocks mainly underground but can also work on the surface. This model is An excellent tool for securing high workings and tunnels, ensuring a safe working environment and constant access to the workplace. The universal screwdriver head design allows all common screw types and combinations to be used, with bolt lengths of up to 6 meters (20 feet), depending on the screwdriver head alternative chosen. The telescopic boom allows you to mount several rows of bolts without moving the machine. An optional second boom – screen holder or basket boom – increases productivity and versatility. Additional automatic functions allow the operator to focus on safe, fast and efficient rock reinforcement. The air-conditioned, soundproofed and tilting cab further enhances safety an ...

The single-head screwdriver is currently adapted for screwing 5L PET bottles. The device can be adapted to screw on other PET or HDPE packaging. The screwdriver is equipped with an automatic screw feeder. Device in very good condition. Capacity: 1600 - 2000 b / h Production year: 2014 Manufacturer: PUH NITRAS

Epson C3-A601S 6-Axis Robot Assembly Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started, the robots and servo drives of the Statioin are stopped, the pneumatic actuators are switched off and cannot be operated. This station consists of 3 functional substations: Functional sequence St.6.1: Control of ribbon cables: Lift the drive out of the chassis and tilt the drive code Control of 3 ribbon connectors by means of vision sensors on the robot gripper arm Reseat the drive in chassis St.6. ...

0: ja, freitstehend Working width: 3000 mm 0: ja RUCHSER sash assembly table RU-BM-3000 --------------------------------------- The Ruchser sash fitting center enables efficient production based on economic aspects. Well thought-out down to the last detail, the system offers maximum ease of use. Important advantages for you: Modular system, the sash assembly table is put together according to your wishes and requirements Easy to use even for inexperienced workers Equipment demonstration machine, alternative / optional equipment on request! Pos. 1.0: Article no. : 0610000 RU-BM-3000, sash assembly table, for sashes up to max. 2500 mm in height with RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of the work platform manually adjustable. Holder for fitting scissors or fitting punch. 10 pieces swiveling commuters for hanging the Wing, completely pneumatically foldable  ...

Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 500 mm Vertical movement: 600 mm Payload: 4 to 10 kg Projection: 120 to 620 mm Guide column vertical: 25 mm Guide columns horizontal: 16 mm Tool holder: 51 x 45 mm Screw clamping - Can be moved in three axes (horizontal, vertical, rotatable) - pneumatic screwdriver DESOUTTER type SD 140-AR510-S4Q - 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D Adjustment range 2 to 5 kg per balancer - for weightless hanging of small appliances - Payload adjustable - constant pulling force Space requirement L x W x H: 770 x 310 x 1150 mm Net weight Pneumatic screwdriver 2.8 kg Net weight handling device: 16 kg good condition; used

Manual hand unit: Nein J/N Automatic for single pieces: Ja J/N Automatic for frames: Nein J/N Clip set 351 on the loose item ------------------------------------ Manufacturer description: - Base frame in stable welded construction - Clip container as tipping conveyor with separation and feeding the clips - Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment - Conveyor belt length approx. 4,000 mm as NC axis - Contact and clamping cylinder - Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered - Workflow automatically in flow -------------------------------------- Technical specifications: - Screw height 50-120 mm - Profile length 350-3,500 mm - Table height approx. 950 mm -------------------------------------- Total price of the machine ex works: on request! Frei ...

Pulse wrench, pneumatic screwdriver ATLAS COPCO EP6PTX32 HR10-AT Ergo Pulse 8431 0375 22 Torque range: 16 - 32 Nm Operating pressure: 6.3 bar Tool holder: 3/8 New ! with operating instructions ! Dimensions (screwdriver only): 205 x 200 x 60 mm

Pulse wrench, pneumatic screwdriver ATLAS COPCO EP7PTX55 HR10-AT Ergo Pulse 8431 0375 32 torque range: 30 - 55 Nm Operating pressure: 6.3 bar Tool holder: 3/8 New ! with operating instructions ! Dimensions (screwdriver only): 200 x 180 x 55 mm

Pulse wrench, pneumatic screwdriver ATLAS COPCO EP11PTX110 HR13-AT Ergo Pulse 8431 0376 52 torque range: 70 - 110 Nm Operating pressure: 6.3 bar Tool holder: 1/2 used, tested ! with operating instructions ! Dimensions (screwdriver only): 205 x 200 x 60 mm

0: ja Working width: 2500 mm 0: nein Ruchser RU-BM-2500 fitting center with fitting storage, mobile ------------------------------------------------------ Pneumatic stops Pneumatic magazine screwdriver Fittings shelf Support table covered with felt Special screwdriver Screw feeder fitting punch Customer processed Siegenai Titan AF fitting. Can be adjusted to other fittings. (Technical information according to manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Electrical Tools 6 Units BOSCH Hot air gun. Model PHG 500-2. ,Serial number 601003669. 1600W. Mfg year 2016. MAKITA Screwdriver. Model 6271D. Serial number 2737571. 12V. Mfg year 2013. 2 bateries & charger included. VIRUTEX Saw. Model SR74K. Serial number 10258. 1200W. 5000 r.p.m. Mfg year 2004 FELISATTI Screwdriver. Model DC13/18L2. Serial number 00171.18V. Mfg year 2012. ,2 bateries & charger included. MAKITA Drill. ,Model HP1641. Serial number 1336586R. 680W. 2800 r.p.m. Mfg year 2012. BOSCH Biscuit joiner. Model GFF 22A. ,Serial number 971000261. 670W. 11000 r.p.m. Mfg year 1999.  , Approx. Onsite Dimension. (l x w x h): 1,100 x 700 x 300 mm, weight approx.: 15 kg

Description: Electrical tools 6 Units WURTH Screwdriver. Model ,BS 12-A solid. ,Serial number 032008. 12V. 2 Batteries & charger included. DeWALT Screwdriver. Model ,DCD710. ,Serial number 814248. 10.8V. 3 Batteries & charger included. PROTOOL Drill. Model PDP 18-2 E-2. 620W. 3000 r.p.m. Mfg year 2006 METABO Drill Iron KUPER  ,Gluing Machine. Model HFZ 4  , Approx. Onsite Dimension. (l x w x h): 900 x 700 x 130 mm, weight approx.: 12 kg

Description: Lot composed of: - Screwdriver with self-locking chuck - Chainsaw - Grinder - Impact screwdriver - Battery charger - Batteries - Carrying case Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 10 kg

Description: Lot composed of: - Screwdriver with self-locking chuck - Chainsaw - Grinder - Impact screwdriver - Battery charger - Batteries - Carrying case Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 10 kg

Description: Lot composed of: - Screwdriver with self-locking chuck - Chainsaw - Grinder - Impact screwdriver - Battery charger - Batteries - Carrying case Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 10 kg

Description: Lot composed of: - Screwdriver with self-locking chuck - Chainsaw - Grinder - Impact screwdriver - Battery charger - Batteries - Carrying case Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 10 kg

Description: Lot composed of: - Screwdriver with self-locking chuck - Chainsaw - Grinder - Impact screwdriver - Battery charger - Batteries - Carrying case Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 10 kg

Description: Lot composed of: - Screwdriver with self-locking chuck - Chainsaw - Grinder - Impact screwdriver - Battery charger - Batteries - Carrying case Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 10 kg

Description: Lot composed of: - Screwdriver with self-locking chuck - Chainsaw - Grinder - Impact screwdriver - Battery charger - Batteries - Carrying case Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 10 kg

Description: Lot composed of: - Screwdriver with self-locking chuck - Chainsaw - Grinder - Impact screwdriver - Battery charger - Batteries - Carrying case Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 10 kg

Description: Lot composed of: - Screwdriver with self-locking chuck - Chainsaw - Grinder - Impact screwdriver - Battery charger - Batteries - Carrying case Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 10 kg

Formats 500, 750, 1000 ml. For pasteurized milk. Conversion to volume production type 190 V. Straightening tool for cassettes with 20 spare cassettes. 2 screwdriver Capper 20. Power 9000 pack/h. Only 13000 operating hours. Disassembled by Tetra itself.

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...

WSM Stationary screwdriving unit screwdriving station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. Functional sequence The station is equipped with the pre-assembled assembly via the transfer belt. The work steps of the automatic station with a run of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled assembly in St.2.1 - Lowering the wearer with the scanner and the vision sensor - Scanning of the 3 codes (front panel, fro ...

Würschum semi-automatic 4-fold filling line Pneumatic filling machine with four filling stations For liquid and viscous products The filling machine has a pneumatic drive for the linear movement of the dosing piston in the stainless steel cylinder. Limit switches define very precisely the volume that the dosing piston sucks in. The dosing volume is set manually with a milliliter scale and a handwheel. This model requires only a compressed air connection, electricity is not required. The suction and dosing speed can be adjusted to the product viscosity by means of throttle valves. With an optional pneumatic manual screwdriver, the containers can be closed immediately after filling. The machine table can be rolled and can be moved to another room for cleaning after the end of production. Applications: Production and Laboratory Chemical industry Cosmetics i ...

GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers

Flexicon FF20 bottle filler Semi-automatic vial filler with stainless steel table + PD12 flexicon pump + FC10 flexicon screwdriver

Key data: 400 mm

Article number: 27-04-004 Manufacturer: Walter Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1990 L x W x H: approx. 600x600x400mm Weight: approx. 300kg Digital display: 1-axis digital display Heidenhain Encoder: Heidenhain Resolution: 0.001 degree Face plate diameter: approx. 400mm Clamping T-slots: 4 pieces of 14mm each Rod passage: approx. Ø 40mm Indexing: manual via handwheel Quick indexing: Electrically via shaft stump & e.g. cordless screwdriver Max.table load: Vertical: approx. 200kg Horizontal: approx. 500kg Accessories: Complete Instruction Manual Mechanical table clamping 1x ISO 40 tool holder Display Bracket Handwheel for indexing with extra-long shaft stump 2 pieces of eyebolts for lifting the table Other accessories on request Price and other technical data on request

The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...

Line for pouring water or other liquids in 2 L packages The line consists of: - PET bottle blower from Sidel SBO 4 - the feeding tunnel of the bottles of own production - Pourer Nagema BF-60 with bottle screwdriver 12 head - Nagema saturator type KOMI - Spomasz label - bottle packer with control cabinet - electric welding furnace + fan for cooling the welding machine - Pragometal pallet wrapper Used machines, for technical inspection It is possible to contact the buyer with the company performing inspections and relocation of machines.

range L-W-H: 780 x 480 x 1050 mm weight: 79,5 kg : 6 St. The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 , 3/8, 1/2 . Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Pliers assortment. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Machining center for final processing and assembly of fittings on windows and doors Dimensions workbench mm: 2,800 x 1,250 Three-spindle drilling unit for grip holes Pneumatic system for reading and cutting window handles "Cremonese" Tilting workbench Complete with pneumatic screwdriver

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of the screwing unit - adjustable distance between screwdrivers 42-110 mm - Automatic screw connection - automatic automatic movement alignment - the ability to work as a screwdriver - screw depth sensor - powerless steering control - Specific feed account Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - screw depth sensor - horizontal pressure

Screwdriver Alcoa Year of construction: 1991 Type: DC 2090ZS Control: Siemens S5 Capacity: up to 50,000 bhp

Optical Tooth Measuring Screwdriver MFV ROMANIA Module: 1.5 - 18 mm Scale size: 0.02 mm used, tested ! Dimensions: 170 x 130 x 40 mm

Optical Tooth Measuring Screwdriver CARL ZEISS JENA Module: 1.5 - 18 mm Scale size: 0.02 mm with protective box Dimensions: 165 x 150 x 35 mm

Optical Tooth Measuring Screwdriver MFV ROMANIA Module: 1.5 - 18 mm Scale size: 0.02 mm with protective box used, tested ! Dimensions: 200 x 170 x 50 mm

Pneumatic impact wrench, pneumatic screwdriver SPITZNAS 1 inch Operating pressure: 6 bar Tool holder: 25.4 x 25.4 mm ( 1 inch ) with claw coupling used, tested ! Illustration may differ ! Dimensions: 360 x 230 x 105 mm

Magazine screwdrivers, drywall screwdrivers, automatic screwdrivers, automatic drill / drivers -Magine screwdriver: for self-tapping screws, sheet metal screws -Suitcase -Total weight: 10 kg

Magazine screwdrivers, drywall screwdrivers, automatic screwdrivers, automatic drill / drivers -Magine screwdriver -280 W 0-1100 rpm -with suitcase -Number: 4 x screwdrivers available -Price: per piece -Dimensions: 515/285/H75 mm -Total weight: 6 kg/piece

pneumatic needle scaler, compressed air needle scaler rust remover needle gun -Needle Rust Remover: Compressed Air Needle Rust Remover Needle Gun -Operating pressure: bar -Dimensions: 470/60/H160 mm -Weight: 3.6 kg -It is a push start screwdriver -Transport price to Holland: 20 euros

A complete line for the production of drinks with capacities from 500ml to 2l. Capacity 9000 pcs. for an hour. The machines worked 1,400 man-hours. The line consists of: Washer with 20 grabs Filling machine for 40 isobaric pourers 8-head screwdriver with magnetic clutch Feeder for feeding caps to the orientator in the machine 600l cap tank UV lamp Adaptation to CIP B&R control Safety covers compliant with EU standards Rotary labeler model MegaRoll 9 for labeling round bottles with an OPP label fed from a roll Plate conveyor set A set of air transporters A set for forming packages and wrapping them in heat-shrinkable foil. Also available: carbonator, ozonator, two wrappers

Filling line with 8-fold bottle filler, 3-fold screwdriver and lifting station The system ran until 2023 with mostly 1000 ml bottles and was no longer needed due to a new investment. Further information can be requested.

Description: With indexable inserts, open-end wrenches, Allen keys, files, points, a drill chuck, ,a screwdriver Approx. Onsite Dimension. (l x w x h): 700 x 600 x 800 mm, weight approx.: 100 kg

Description: Contents Milling cutters, collets, drill bits, Torx screwdriver, Allen key, threaded rods, BT 40 tool holders Attention: without the 4th axis under the table , weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 600 x 900 mm

Code: 0376 Brand: MASTERWOOD - ITALY Model: TEKNOMAT 3000 - CE Standard CNC working center anuba hinge unit/routing with 7-spindle tool changer for fitting anuba hinges and milling all types of hardware, arched window elements, doors, staircase elements, etc. - CE Standard Technical data : Two fully NC-controlled operating units Anuba hinge unit : loader diameter mm 14/16 - Tilting head -10°/+90° - Max anuba centre distance mm 2950 - Automatic sensor - Drilling motor Hp 2 - Rpm 3600 - Screwdriver motor Hp 1,5 Routing unit: Universal router for milling all types of hardware, arched window elements, doors, staircase elements - High frequency electro spindle 18.000/24.000 rpm Hp 9 - Automatic 7-spindle tool changer - Reach mm 1000 N° 5 tables with n° 6 vacuum suction cups for workpiece clamping X axis speed mt/min 50 Y axis speed mt/min 30 Z-axis speed mt/min 14 Numeric ...

Description: Composed of: Jigsaw jigsaw PRACTYL , A DEXTER battery charger A DEXTER cordless screwdriver , A DEXTER wrench , Approx. Onsite Dimension. (l x w x h): 500 x 400 x 500 mm, weight approx.: 15 kg