screwdriver used for sale

Electric screwdriver, built-in screwdriver, screwdriver DESOUTTER Rod screwdriver for screwdriving technology Type: EME 35-20J Torque range: 4.0-15 Nm Speed: max. 2067 rpm Output: 3/8 bit recording Attachment extension: M6 - Aluminium bracket for handling device - Screw feeder 12 mm (inner diameter) Dimensions L x W x H 90 x 60 x 950 mm Weight electric screwdriver with mounting device: 4.3 kg good condition; used

Pneumatic screwdriver, pneumatic screwdriver DESOUTTER Pneumatic screwdriver, rod screwdriver for screwdriving technology type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm. Compressed air requirement: 6 bar Air consumption: 8.7 l/s Bit absorption: M6 - Rotary switch for clockwise and counterclockwise rotation (rotary bezel control) - without screwdriver switch-off - Compressed air control line 4 mm - Compressed air connection for screwdriver function min. 10 mm - Aluminium bracket for handling device - Screw feeder 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg good condition 3 pieces available, price per screwdriver; used

Built-in screwdriver with control, BL57/50 MDW, 457010, Pico/mA, DSM, used Top Attention special price! (For your info - current new price for this screwdriver and control € 9.500 excl. VAT) We have set the lowest price on the market for a comparable used part. We still have several identical and other such units, but the quantity is ending. If you buy more than 1 piece you will get a great discount. If you have a UID number we will gladly issue an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Technical data: Screwdriver BL57/50 MDW, DSM 457010, max. 50Nm, incl. all cable sets. This high quality DSM screwdriver is designed for direct measurement of torque and angle of rotation. The high-precision transducers required for this are installed directly on the output. The meas ...

14-speed mounting screwdriver AC, for cylinder head mounting etc. Next: 3 spindle assembly screwdriver AC 3 and 6-spindle screwdriver ATLAS-COPCO 2 spindle screwdriver AC 3 spindle assembly screwdriver SPS & AC 1 spindle assembly screwdriver SPS

Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver -Speeds: 520 rpm -Hexagon: 11 mm -Weight: 3 kg

Pneumatic screwdriver, rod screwdriver, pneumatic straight screwdriver, BOSCH 0 607 454 224 ( 0607454224 ) 3,4 Nm 640 rpm 6,3 bar used, tested ! Dimensions: 245 x 45 x 35 mm

Pneumatic screwdriver, rod screwdriver, pneumatic built-in screwdriver, DEPRAG 341-328-31 bit size: Ø 6 mm x 50 mm used, tested ! Dimensions: 260 x 45 x 40 mm

Pneumatic screwdriver, rod screwdriver, pneumatic screwdriver DESOUTTER Type 2B88-A Speed: max. 1200 rpm bit size: hexagon 8 mm handle diameter: 28 mm used, tested ! Dimensions: 220 x 42 x 38 mm

Electric screwdriver, servo screwdriver, with torque adjustment ATLAS COPCO QMR42-25-RT Tool holder: 3/8 R SERVO MOTOR: BSM 2260C-R4.3 4230 1704 81 speed: max. 7000 rpm voltage: 22 V at 1000 rpm QRT38050 4230161380 New ! Dimensions: 590 x 120 x 45 mm

Electric Hand Screwdriver, Electric Screwdriver WMW, POWER TOOLS SEBNITZ SRM 450 ( SRM450 ) 0,32 KW 1000 rpm 220 V 1AC 50 Hz Tool holder: 10 mm hexagon approx. 2.0 m Connection cable used, tested ! Dimensions (without cable): 380 x 180 x 70 mm

2-fold mounting screwdriver PLC, for adaptations etc.

Weber CNC automatic screwdriver with 2 vibratory feeders (Allen M8+washer) Working area approx.: 400x200mm Currently there are 2 programs available (1x 4 positions and 1x5 positions)

Pneumatic screwdriver with spring balancer BOSCH 0 607 454 224 ( 0607454224 ) 3.4 Nm 640 rpm 6.3 bar spring balancer: TECNA 9200 load capacity: 0.4 - 0.8 kg extension: 1,350 mm used, tested ! Dimensions: 320 x 230 x 150 mm

Spring-loaded pneumatic screwdriver BOSCH 0 607 454 231 ( 0607454231 ) 5 Nm 640 rpm 6,6,3 bar Spring balancer: BOSCH 0 607 950 920 Load capacity: 0.3 - 1.2 kg Extension: approx. 500 mm spiral hose approx. 2.5 m extendable used, checked! Dimensions: 450 x 240 x 80 mm

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

Plastic SV 28

Screws station from the PV or solar industry, which gets just Aufwindabsolut as new ca 30 BetriebsstundenNeupreis for both plants, lt invoice 256.000,-€ to the mount out of so-called carrier frame inserts Graphitzum coat 2 stations in this range of solar modules for subsequent thermal treatment are Duennschichttechnologiees, are hardly separable, there is only a control or control cabinet for the whole SystemUnterlagen are available

Air pressure 6bar Operating voltage: 3 x 400V

Universal screwdrivers, construction screwdrivers, screwdrivers, electronic screwdrivers, power screwdrivers, electric screwdrivers -Nominal consumption: 400 watts -Max. Screw capacity: 10 mm -Connection: 220 volts -Price: per piece -Number: 11 pieces -Dimensions: 420/140/H80 mm -Weight: 4 kg/piece

Universal screwdrivers, construction screwdrivers, screwdrivers, electronic screwdrivers, power screwdrivers, electric screwdrivers -Nominal consumption: 600 watts -Max. Screw performance: M8 -Speed: 600/1800 rpm -Connection: 220 volts -Price: per piece -Number: 35 pieces -Dimensions: 320/200/H80 mm -Weight: 3.3 kg/piece

Description: Different versions with different mounts. Approx. Onsite Dimension. (l x w x h): 400 x 300 x 200 mm, weight approx.: 10 kg

Description: Quantity: 6 pieces Adjustable 15 - 30 Nm  , Approx. Onsite Dimension. (l x w x h): 400 x 300 x 200 mm, weight approx.: 12 kg

Description: Quantity: 4 pieces Adjustable 42 - 70 Nm Approx. Onsite Dimension. (l x w x h): 400 x 400 x 200 mm, weight approx.: 10 kg

Description: Quantity: 9 pieces Adjustable 15 - 30 Nm Approx. Onsite Dimension. (l x w x h): 400 x 300 x 200 mm, weight approx.: 12 kg

Description: Consisting of 2 pieces Manufacturer: FESTO and METABO With a total of 3 batteries Approx. Onsite Dimension. (l x w x h): 400 x 300 x 100 mm, weight approx.: 15 kg

Description: 2 pieces , Voltage 10.8 V , Total of 3 batteries, one charger , Battery function not checked , Approx. Onsite Dimension. (l x w x h): 400 x 400 x 100 mm, weight approx.: 5 kg

Description: 2 pieces , Battery voltage 10.8 V Total of 3 batteries, 2 chargers , Battery function not checked Approx. Onsite Dimension. (l x w x h): 300 x 400 x 100 mm, weight approx.: 6 kg

Description: 3 pieces, with battery and charger Battery function not checked Approx. Onsite Dimension. (l x w x h): 500 x 500 x 100 mm, weight approx.: 8 kg

Description: 3 pieces A total of 8 batteries, 3 chargers , Battery function not checked , Approx. Onsite Dimension. (l x w x h): 600 x 600 x 100 mm, weight approx.: 8 kg

Description: 2 pieces , Total of 3 batteries, 2 chargers , Battery function not checked Approx. Onsite Dimension. (l x w x h): 400 x 400 x 100 mm, weight approx.: 6 kg

Description: 2 pieces, with NiCd 12 V battery Torch ML 120, with rechargeable battery 2.5 Ah Additional rechargeable battery Charger Battery function not checked Approx. Onsite Dimension. (l x w x h): 400 x 400 x 200 mm, weight approx.: 8 kg

Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, hand drill -Nominal consumption: 330 watts -Max. Drill: 10 mm -Connection: 230 volts -Weight: 2 kg

WSM Stationary screwdriving unit Screwdriving station Assembly station Automatic station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. 4.6.2 Functional sequence This station consists of 4 substations: St 4.1 Screw chassis: - optical inspection of the core hole position 6 - Positioning of the screwdriver by means of XY-Z servo axis port - 5x screwing from above St. 4.2 Mounting LW angle: - manual placement of the LW angle on the cycle belt handling - eject and position the LW angle by  ...

Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, hand drill -Nominal consumption: 650 watts -Max. Drill: 6 mm -Connection: 230 volts -Weight: 2 kg

Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, hand drill -Nominal consumption: 650 watts -max. drill: 18 mm -Connection: 230 volts -Weight: 5.5 kg

range L-W-H: 790 x 460 x 960 mm weight: 70 kg : 7 St. Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4 premium ratchet. 1/4 knee joint 45 mm. 1/4 extension 100mm. 1/4 socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4 long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8 premium ratchet. 3/8 knee joint 55 mm. 3/8 extension 150mm. 3/8 socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8 long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2 premium ratchet. 1/2 knee joint 75 mm. 1/2 extension 125mm. 1/2 Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2 Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22 ...

Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, hand drill -Nominal consumption: 600 watts -Max. Drill: 10 mm -Connection: 230 volts -with: suitcase -Dimensions case: 385/295/H100 mm -Weight: 3.2 kg

Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, hand drill -Nominal consumption: 740 watts -Max. Drill: Ø 13 mm -Connection: 220 volts -Number: 6x drilling machines available -Price: per piece -Dimensions: 450/210/H80 mm -Weight: 4.3 kg/piece

Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, hand drill -Nominal consumption: 530 watts -Max. Drill: 10 mm -Connection: 230 volts -Dimensions: 260/60/H200 mm -Weight: 1.6 kg

A glass bottle fruit juice hot filling line with bottles cooling tunnel Capacity: 5,000 units (1.0 and 0.75l), built between 1994 and 2014 Box line, equipped with K 1; Dirt box task on transport system, done manually K2; Bottles lid screwdriving system from Fa. Elektro Maschinenbau Rink GmbH, Type: KM 740/7K , Fabr. No 07/1813/93 Year of construction 1993 4 boxes of 6 bottles each are made at the same time the lids autom. unscrewed and put into a Containers disposed of. K3; Kettner bottle unpacking line Comm. No. 93/0604/083, Type: R09 JUN 9, Year of construction 1993 12 tulips per row x 3 are simultaneously lifted out of the box and onto a bottle tasktable with 15 V2A chain belts. K4; Box washing and turning system Enema at the bottom, outlet of the box at the top Manufacturer Fa.. Klotzki Maschinenbau, Type: Reversible wheel washer, year ...

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 7 St. Tool trolley with 8 drawers, 6 of which contain tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and detectable. - The tool included is made of chrome vanadium steel. + Drawer 1: - 1/4 inches: 13 nuts from 4mm to 14mm, 11 long nuts 4mm - 13mm Ratchet, universal joint, extension. - 3/8 inches: 10 nuts from 10mm to 19mm, 11 long nuts from 8mm to 19mm Ratchet, universal joint, extension. - 1/2 inches: 17 nuts from 10mm to 30mm, 9 long nuts from 10mm to 24mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4 inch ratchet: Torx nuts without bore T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with bore TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Imbus nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH ...

The machine is already in Poland with us on site. , a drilling rig from the well-known Swedish brand Sandvik. Used for rocks mainly underground but can also work on the surface. This model is An excellent tool for securing high workings and tunnels, ensuring a safe working environment and constant access to the workplace. The universal screwdriver head design allows all common screw types and combinations to be used, with bolt lengths of up to 6 meters (20 feet), depending on the screwdriver head alternative chosen. The telescopic boom allows you to mount several rows of bolts without moving the machine. An optional second boom – screen holder or basket boom – increases productivity and versatility. Additional automatic functions allow the operator to focus on safe, fast and efficient rock reinforcement. The air-conditioned, soundproofed and tilting cab further enhances safety an ...

The single-head screwdriver is currently adapted for screwing 5L PET bottles. The device can be adapted to screw on other PET or HDPE packaging. The screwdriver is equipped with an automatic screw feeder. Device in very good condition. Capacity: 1600 - 2000 b / h Production year: 2014 Manufacturer: PUH NITRAS

Epson C3-A601S 6-Axis Robot Assembly Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started, the robots and servo drives of the Statioin are stopped, the pneumatic actuators are switched off and cannot be operated. This station consists of 3 functional substations: Functional sequence St.6.1: Control of ribbon cables: Lift the drive out of the chassis and tilt the drive code Control of 3 ribbon connectors by means of vision sensors on the robot gripper arm Reseat the drive in chassis St.6. ...

0: ja, freitstehend Working width: 3000 mm 0: ja RUCHSER sash assembly table RU-BM-3000 --------------------------------------- The Ruchser sash fitting center enables efficient production based on economic aspects. Well thought-out down to the last detail, the system offers maximum ease of use. Important advantages for you: Modular system, the sash assembly table is put together according to your wishes and requirements Easy to use even for inexperienced workers Equipment demonstration machine, alternative / optional equipment on request! Pos. 1.0: Article no. : 0610000 RU-BM-3000, sash assembly table, for sashes up to max. 2500 mm in height with RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of the work platform manually adjustable. Holder for fitting scissors or fitting punch. 10 pieces swiveling commuters for hanging the Wing, completely pneumatically foldable  ...

Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 500 mm Vertical movement: 600 mm Payload: 4 to 10 kg Projection: 120 to 620 mm Guide column vertical: 25 mm Guide columns horizontal: 16 mm Tool holder: 51 x 45 mm Screw clamping - Can be moved in three axes (horizontal, vertical, rotatable) - pneumatic screwdriver DESOUTTER type SD 140-AR510-S4Q - 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D Adjustment range 2 to 5 kg per balancer - for weightless hanging of small appliances - Payload adjustable - constant pulling force Space requirement L x W x H: 770 x 310 x 1150 mm Net weight Pneumatic screwdriver 2.8 kg Net weight handling device: 16 kg good condition; used

Manual hand unit: Nein J/N Automatic for single pieces: Ja J/N Automatic for frames: Nein J/N Clip set 351 on the loose item ------------------------------------ Manufacturer description: - Base frame in stable welded construction - Clip container as tipping conveyor with separation and feeding the clips - Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment - Conveyor belt length approx. 4,000 mm as NC axis - Contact and clamping cylinder - Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered - Workflow automatically in flow -------------------------------------- Technical specifications: - Screw height 50-120 mm - Profile length 350-3,500 mm - Table height approx. 950 mm -------------------------------------- Total price of the machine ex works: on request! Frei ...

Pulse wrench, pneumatic screwdriver ATLAS COPCO EP6PTX32 HR10-AT Ergo Pulse 8431 0375 22 Torque range: 16 - 32 Nm Operating pressure: 6.3 bar Tool holder: 3/8 New ! with operating instructions ! Dimensions (screwdriver only): 205 x 200 x 60 mm