rs used for sale

Key data: 610 mm, 350 mm, 460 mm

Pre Mill V 610 B, Year of construction 2016, Control Siemens 828 D / Shop Mill, Travel X/Y/Z 610/350/460 mm, Tool changer 16-speed, SK 40, Table size 710 x 350 mm, Spindle speed up to 8,000 rpm, RSR 232, USB Flat guide, spiral conveyors, IKZ 30 bar, Suction prepared 4 axis, electr. Handwheel 3D Probe Hexagon,

M. No.: 322 // Counter: 80188 hours Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -ILLIG mill RS75B // Age: 1999 Control cabinets, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

NÜVE NC 40 M steam autoclave for sterilization of liquid media and solid materials used in laboratories. Autoclave unpacked but unused. External dimensions (W x D x H): 570 x 660 x 1200 mm Autoclave chamber dimensions (diameter x depth): 320 x 520 mm Capacity: 40 l Temperature range: 105-135 degrees Celsius Display: 4.3, color, LCD Programming: 2 defined programs for liquids and 3 for solid materials, possibility of adding 1 program for liquids and 1 program for solid materials Possibility to program a delayed start Power consumption: 2500 W Built-in USB port RS232 computer connection with the possibility of connecting a printer Saving the last 25 cycles in internal memory Warranty until 2026

CELL COMPOSED OF: 2 MULTICONTACT GRINDING UNITS WITH 3 BELTS fully automatic with intelligent system, capable of maintaining the programmed working pressure constant. 1 UNIT mod. FLEXIBLE DISK The operation of the unit is governed and managed by the program of the robot 1 UNIT mod. FLEXIBLE DISK The operation of the unit is governed and managed by the program of the robot 2 KAWASAKI RS50N ROBOTS each having a wrist capacity of 50 kg. Each robot is complete with: _ANTI-SPARK PROTECTION on the wrist; _TICKET INSPECTOR; _PNEUMATIC SYSTEM.

2 Farben Offsetdruckmaschine - 2 Color Sheet-Fed Offset Press Heidelberg PM 52-2+ Baujahr / Year 2008 - Serial-No. RS001504 Format / Size max. 360 x 520mm  Druckzahl / Impressions 63 Mio. Feuchtwerk mit Kuehlung / Dampening System Alcolor - Baldwin Refrigeration Plus Version EasyPlate Plate exchange Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 13.000 Sheet Per Hour Ink laser ducts Auslagetrommel SuperBlue Powder Spray Grafix Alphatronic 200 Inklusive Handbuecher / Manuals Included  Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Bus termination resistor, for fieldbus systems, 4 pcs TURCK 6601590 ( DLR ) RSS4.5-PDP-TR connector thread: M12 x 1.0 New ! Dimensions ( single bus termination resistor ): 16 x 16 x 44 mm Dimensions ( packaging ): 50 x 40 x 40 mm

CNC lathe sliding headstock STAR SR20R /// SR 20 R TECHNICAL CHARACTERISTICS: Year: 2000 NC Type: FANUC 18i-T Number of axes: 5 Max. length Machinable: 205 [mm] Max. diameter Turning spindle bar: 20 [mm] Max. speed Spindle: 8000 [RPM] C-axis indexing accuracy: 0.001 [°] Spindle power: 3.7 [kW] Max. diameter Counter-spindle bar: 20 [mm] Max. speed Counter Spindle: 4500 [RPM] C-axis counter-spindle indexing accuracy: 0.001 [°] Counter Spindle Power: 1.1 [kW] Number of end device positions: 4 Number of motorized end positions: 4 Number of comb positions 1: 6 Number of Comb 1 Motorized Stations: 4 Comb Rotating Tool Speed 1: 5000 [RPM] Number of counter-operation positions: 4 Number of motorized counter-operation positions: 4 Watering pan capacity: 155 [l] Supply voltage: 400 [V] RS232 port: Yes Hours Operating: 40920 [h] Weight: 2200 [Kg] EQUIPMENT INCLUDE ...

RST Chain Conveyor 250x150 cm 17 m/min 1.1kW Width: 250 cm Length: 150 cm Speed: 17 m/min Gear motor: 1.1kW Weight: 543 kg This conveyor is designed for use in the food industry, specifically in applications such as food processing, packaging, and distribution. It can efficiently transport food products between different stages of production, from initial processing to final packaging. Its size and speed make it suitable for moving a wide range of food items, ensuring smooth operations in facilities focused on food safety and productivity.

General SKULU005 LocationNetherlands MakeHerbold Main Features Motor110 KW Specified Features - Fine Impact Mill MaterialMild steel, Stainless steel Information With control cabinetcheck Floor space10,9x7,3 m Total height7,3 m CEcheck Extra SpecificationsThe system comprises a range of specialized machinery tailored for plastic processing and material separation: 1. Granulator (Type SMS 45/60-H5-3): This machine is equipped with a cutting chamber, rotor, and high-quality blades for size reduction. It also includes an extraction system for efficient operation. 2. Air Separation Unit (Type SZS2 450/150): Featuring an air stream separator and adjustable air flow, this unit efficiently separates light materials. It is complemented by a rotatory lock and a suction unit for enhanced performance. 3. Buffer Bunker with Screw: Serving as a material buffer, this component has indicat ...

- Number of axes : 4 MILLING SPINDLE - Tool holder type : ISO50 - Spindle power : 17 [kW] - Spindle speeds : 10-4000 [rpm] - Number of spindle hours : 29050 [h] LINEAR AXES - Travels on X/Y/Z axes : 1600/1100/1000 [mm] - Rapid traverses rates (X/Y/Z) : 12 [m/min] - Cutting feed rates (X/Y/Z) : 0.0001-8 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Loading arm - Tool magazine capacity : 120 TABLE - Table dimensions : 1700 X 1200 [mm] - Maximum weight upon table : 4000 [kg] - Distance table / spindle nose (min./max.) : 85-1085 [mm] PALLET CHANGER - Pallet size : 1200 X 1200 [mm] - Pallets number : 2 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 55 [kW] WEIGHT & DIMENSIONS - Machine floor space : 51100 X 7250 [mm] - Machine height : 3610 [mm] - Machine weight : 15000 [kg] MACHINE HOURS - Number of hours under power : 94683 [h] - Number of ...

Wagner WDC 660x2000 lathe with Siemens 828 Shopturn CDC control: - 3 range changes - automatic gearbox - constant cutting speed - bench guides induction hardened, ground and covered with turcite - Hardened and ground precision ball screws - electrically ensured self-centering protection - manual tailstock, MK6 sleeve - centralized automatic lubrication of the guides - RS232 interface - complete refrigeration system - machine lamp - integral fairing with 2 sliding doors and safety glass window - 1 set of machine leveling pads - service tool - 8-position hydraulic revolver 25x25 - Fixed steady rest with rollers from 50 to 225mm - Self-centering with tangential control ra - Transport of shavings with wagon Complete with user manuals and control instructions Year of production: 2017 Working hours: 650 Technical detials: Maximum rotating diameter above the bed 660 mm  ...

Robotized cell for 3D laser cutting 3D laser cutting cell, powered by a TRUMPF LASER TRUDISC 2000 (FD24) source. The line includes: ROBOT FANUC R-2000iB 165 F year. 2007.XII. + CABINET + TEACH PENDANT HEAD FOR LASER CUTTING PRECITEC LD 30C D50 YR30 LENZE MCM09C30 -RS0F1 SYNCHRONOUS SERVO DRIVE 2 PCS ROTARY TABLE EXPERT-TUNKERS TYPE ED920 / 1655/2 POWER SOURCE TRUMPF LASER TRUDISC 2000 (FD24) SICK SAFETY CURTAINS INSTALLED ALBANY DOOR HIGH-SPEED DOOR SYSTEM MP300 CONTROL PANEL SIEMENS SIMATIC MULTI PANEL + SOFTWARE CONTROL CABINET FIBER OPT CUTTING CELL (external 3.4 x 5.2 m, height 2.9) Additionally, we include full cabling necessary for the operation of the 3D cell. If you have any questions, we remain at your disposal

Category Fluorescence Detector Manufacturer Shimadzu Model RF-AXL Serial Number C20953400092 Date of construction 30/7/96 State Good working condition New price +/- 18.500 EUR Specification D x W x H 260W x 520D x 205H mm Flowrate N 2 12 L/min; Air 2 L/min Voltage AC 230 Weight 17kg Description: Shimadzu Fluorescence detector RF-10AxL. 200-650 nm. Xenon lamp. Operating field. Display. 230 V. 50 Hz, 350 W. Interfaces: analog, RS232c, remote. Analytical flow cell. CE marked

: neu : ca. 6 Monate ab Auftragse : Taiwan : 120620 € : 2400.34 € : 600 mm : 1.000 x 400 mm : 1015 mm : 1.000 x 400 mm : 100 mm : 5 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 450 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 2.2 kW : 1.1 kW : 1.1 kW : 4450 mm : 2655 mm : 2080 mm : 4200 kg : 250 kg : 470 kg : 355 x 50 x 127 mm : 0,005 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, checkout 7) Longitudinal guides with double V shape, with Turcit ...

Chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank, system is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator and a buffer as well as an internal P3 pump. low GWP refrigerant R454B, winter package, RS485,

Demag Concept 300-630/2300 injection molding machine Year of production - 2006 Clamping force - 3000 kN Spacing between columns - 950 X 950 mm Table size - 630 x 630 mm screw diameter - 80 mm injection volume 1583 cc injection weight - 1430 g injection pressure - 1437 bar machine weight - 14,600 kg dimensions of the machine 6.5 x 1.9 x x 2.3 m number of man-hours worked 75299 Screw 80 mm hardened (good condition) RSP revised in 2022 2021 injection system has been completely sealed 2019 the pump along with the control valve and Hall sensor has been completely revised

Enveloping line KERN K40-15 is designed for film packaging of magazines, books and other similar printed products. The K40-15 is an extremely flexible system that can be easily and quickly set up to work with products of the required format. The system is able to work with great efficiency. The maximum capacity of the line is 15,000 pieces per hour. Design. The line has a modular design, including: - continuous log loader (ASH module); - main feeder (SHTH); - main conveyor (modules FM2 and FMB); - FPO cover opening (lifting) module; - two additional attached feeders RS341; - film insertion module K40-15; - culling module; - product flip module; - label sticker module; - stacker; - output conveyor

I am selling this amazing packaging machine, ideal for e-commerce businesses. I used it for a short period and it works perfectly. It is in excellent condition, almost like new. Model: GS6OA Speed: Up to 650 packages per hour. Connectivity: Compatible with ERP, WMS systems and more. Interface: 12-inch LCD touch screen. Bag Size and Shipping Sheet: Accommodates different sizes, fully customizable. If you are interested or have any questions, dont hesitate to write to me! Bag Specification: PE Roller Bag Thickness: 0.04-0.08mm Width: 200-560mm Length: 350-800mm Shipping Sheet Size: Width: Maximum 100mm Options: 100mm, 180mm or Custom Speed: Max. 650 Packages/Hour Human-Machine Interface: Mouse, Touch Screen, Virtual Keyboard Screen: 12 inch LCD External Communication: Ethernet, USB, RS232 Pneumatic Supply: 0.025m₽/min 5Kg/cm3 Power: AC220V, 50/60Hz 1500W Machi ...

CNC turret lathe Okuma LB15 at call The OKUMA LB 15 CNC lathe has been professionally serviced regularly since its purchase and is in perfect technical condition. It has a hydraulic chuck with a diameter of 250 mm and a turret holder for 12 tools. The turning spindle rotates at a speed of 70-3800 rpm and has a diameter of 75 mm. Technical specifications of the CNC lathe OKUMA LB-15 – CNC control: OSP 5000L-G CNC system (German) – Data transmission: RS232 – Tool turret: 12-position type BOLT ON – Slain chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – non-continuous spindle – Diameter of the spindle bore: fi 75 mm (at a depth of 70 mm, measured from the front of the lathe chuck and without jaws) – Diameter of the spindle bore: fi 28 mm (at a depth of 200 mm, measured from the front of the lathe chuck and without jaw ...

Clampable cutter head type (max.): 460 mm Cutter head weight (max.): 150 kg Mounting disc diameter for cutter heads (Ø): 360 mm Mounting cone for cutter heads Nominal diameter: Ø 58,227 mm travel -z axis: 200 mm diagram-drawing enlargement: ±10 - ± 500 µm weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC- ...

: gebraucht : 1991 : 1681 : ca. 2 Wochen ab Auftragse : Bulgarien : 7900 € : 1 : 580 mm : 2000 mm : 285 mm : 72 mm : 380 mm : 400 mm : DIN55022, Größe 8 : 80 M : 11,2 - 2000 1/min : 0.04 - 3 mm : 255 mm : 140 mm : 75 mm : 5 MK : 200 mm : 7.5 kW : 3550 mm : 1250 mm : 1630 mm : 3450 kg 3-axes digital read out RSF 3-jaw chuck Forkardt Dm. 315 mm steady rest 4x steel holder gap bed type chuck protection machine lamp coolant equipment operating manual in German WITH FOLLOWING DEFECT: the clockwise rotation does not engage, so the hand lever must remain held The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 72710 € : 1461.47 € : 445 mm : 460 x 200 mm : 460 mm : 450 x 200 mm : 0,1 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 220 mm : 340 mm : 0 - 3000 mm/min : 0.001 mm : 1000 - 7000 1/min : 3 kW : 0.7 kW : 1.1 kW : 1.1 kW : 2510 mm : 2515 mm : 2010 mm : 1550 kg : 1015 mm : 175 kg : 210 kg : Dm. 205 x 12,7 x 31,75 mm : 0,004 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, checkout 7) Longitudinal guides with double V shape, with T ...

Ransomes - Parts // also Agria Iseki Jacobsen SABO Shibaura Toro Used parts and components available from stock for: 213 D, 350 D, Commander 3510, Fairway 405, MK IV, MK 11, Rider J74: mowing spindles, hydraulic components, engines, axles, wheel drives, hydrostats, hydraulic pumps, wheels and tires, steering parts, steering orbit rollers, etc. Other miscellaneous parts of Agria 9300, Jacobsen HR5111; 1471, Gutbrod 2850DA, Iseki div., Hako 1800-2750, John-Deere div., Sabo 1203; 1500; 1502D; RS84 Senior, Shibaura SP1840; CM364, Toro Pro81 etc. ... Complete spindle units and 3-fold cylinder mowers Bucher, Loipfinger, Jacobsen as well as Ransomes and SABO Info and offers on request. No sending of package deals or lists.

CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Type: MG PPA 8001 20+S1200 Year of construction: 2005 CNC control 1 x Plasma Kjellberg FineFocus 800 TWIN with rotator 1 x Plasma Kjellberg HiFocus 160i 1 x oxy-fuel torch 1 x Pipe Cutting Device RSV without filter system Availability: End of May 2024

C - Bow, Type Ziehm Vison Solo Very good technical and optical condition

Drawer module Transfer and centering module Interchangeable 2-point double gripper standard Robot Cell Data: Dimensions (L x W x H) 2500 x 2000 x 2373 mm Dimensions: 5000 x 3000 mm Operating voltage: 3 x 400 V, 50 Hz Control voltage: 24 V DC Power consumption: max. 1.5 kVA Technical data robot control: Type: FS100 Dimensions (H x W x D) 470 x 200 x 420 mm Cooling system: indirect cooling Interface: USB interface (2.0), RS232C and LAN (100 Base-TX710 Base-T)

Accu-Sort Axiom-X 2L Barcode Scanner RA2283 Manufacturer: Accu-Sort Model: Axiom-X Number of lasers: 2 Maximum scans per second 1120 SPS Voltage: 230V AC (12-30V DC) , 24V output Size L 311 mm x W 354 mm x D 176 mm Weight of scan head 6.6 kg Mounting bracket: 1.9 kg Cable base 0.8 kg Power supply unit 1.1 kg Housing Powder-coated cast aluminum, high-impact plastic, protection class IP54 Operating temperature: 0° to +50° C Storage: -20° to +70° C Relative humidity 10% - 90% non-condensing Laser type Visible laser diode 650 nM (standard) Power consumption < 40 W Optical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs) Barcode types All standard 1D symbologies Connections Dedicated setup connection, optional RJ45 connection for Ethernet Communication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relays Comm ...

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

turning length: 920 mm turning diameter over bed: 260 mm turning diameter over slide rest: 140 mm number of spindle speeds: 35.5 - 3150 U/min. turning speeds: 14 Stk. spindle bore: Ø 30.0 mm quill stroke: 100 mm bed width: 255 mm tailstock quill taper MT: DIN 228 / MK 4 spindle taper: DIN 55027 / GR 5 feeds - longitudinal: 0.04 - 0.4 mm/U feeds - cross: 0.02 - 0.2 mm/U voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 1100 kg range L-W-H: 2140 x 850 x 1400 mm Machine from a vocational school (NL) Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - RSF Z-520 2-axis digital display - RÖHM 3-jaw chuck Ø 200 mm, including chuck key - foldable lathe chuck protection - DREHBLITZ steel holder - TYPE DB 70 - with 2x inserts - robust, movable ...

turning length: 920 mm turning diameter over bed: 260 mm turning diameter over slide rest: 140 mm number of spindle speeds: 35.5 - 3150 U/min. turning speeds: 14 Stk. spindle bore: Ø 30.0 mm quill stroke: 100 mm bed width: 255 mm tailstock quill taper MT: DIN 228 / MK 4 spindle taper: DIN 55027 / GR 5 feeds - longitudinal: 0.04 - 0.4 mm/U feeds - cross: 0.02 - 0.2 mm/U voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 1100 kg range L-W-H: 2140 x 850 x 1400 mm Machine from a vocational school (NL) Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - RSF Z-520 2-axis digital display - RÖHM 3-jaw chuck Ø 200 mm, including chuck key - foldable lathe chuck protection - DREHBLITZ steel holder - TYPE DB 70 - with 2x inserts - robust, movable ...

Description: RS232 E 485 adapter to Ethernet. Batch consisting of a VGA cable, a charger and a serial device server signal conversion module from VGA to Ethernet. Approx. Onsite Dimension. (l x w x h): 100 x 100 x 100 mm, weight approx.: 1 kg

Used filling line CFT for cans up to 10800 cph The used CFT filling line for cans up to 10 800 cph represents indeed a reliable and efficient solution for industrial bottling operations Equipped with specialized and high quality equipment this line is meticulously designed to maximize productivity and ensure in fact optimal results CFT Empty Can Twist Rinser Water Rinse of the CFT Canning Line The CFT empty can twist rinser with water rinse provides thorough cleaning of empty cans Moreover with its dual can rinser system and spare parts sets for 0 35L and 0 47L aluminum cans it ensures flexible operation tailored to specific production needs Additionally the rinse process guarantees pristine can surfaces vital for maintaining product integrity CFT 20 Valve Can Filler Seamer of the CFT Canning Line The 2013 model RS20 CFT 20 valve can filler with seamer ensures precise and rapid filling o ...

Description: Consisting of a router (type: OF1000EB) and an orbital sander (type: RS200EQ) Approx. Onsite Dimension. (l x w x h): 600 x 300 x 150 mm, weight approx.: 15 kg

Description: Ser.Nr.: 18642, Control: HAIDENHAIN iTNC 530, Spindle: 18.000 rpm, Tool holder: HSK-A 63, 38 tool places, Scraper conveyor KNOLL 850 K-1, Compact filter KNOLL KF 200/1000/RSF, IKZ up to 80 bar, Laser tool measurement BLUM, Measuring probe M&,H, Total line: 41 kVA, Travels X/Y/Z: 850/700/500 mm, rapid traverse linear: 45 m/min, Read off operating hours: Control on: 62,613 h, Machine on: 58,922 h, Program run: 14,328 h, Spindle on: 11,132 h, Rigid clamping table 1,070 x 700 mm, max. table load 2,000 kg, T-slots 14 H7, Attention: Machine is offered without tools and without workpiece vice Approx. Onsite Dimension. (l x w x h): 3,150 x 2,400 x 2,900 mm, weight approx.: 11,000 kg

Description: Control voltage on: 35'849 h Main spindle BE1: 23749 h Boring head BE1: 3709 h Drill head: 17 spindles Main spindle: 18.5 kW controlled Chain changer 30-fold HSK F63 Speed range 0-18'000 rpm Drilling head 35 spindles vertical, for automatic changing into the main spindle Control system was converted in 2014: RECHNER IPC 5.11.0.0 WITH DVD, Industrial PC IPC 5.11 from Eltec with Windows XP operating system, hardware: Industrial PC Intel Core 2 Duo E8400 3.0 GHZ, working memory 4 GB RAM, 2 COM interfaces RS232, internal DVD-ROM drive, 1 fixed hard disk with 250 GB, 1 USB hard disk for data backup, 4 USB ports, Ethernet network connection with EC Declaration of Conformity Series no. 0-201-19-1527 without tools or units and without vacuum pump ( central vacuum system ) Translated with DeepL.com (free version) working width y-axis: 1,600 mm, working height z-axis: 950 mm, work ...

Unused Huber model Unichiller 350Tw-H12. Operating temperature range: -20°C...100°C, temperature stability at -10°C is 0.2K. Cooling power at 15°C is 35 kW, at 0°C is 25 kW, at -10°C is 16 kW, at -20°C is 10 kW. Refrigerant R449A. Unit includes 5,7 colour touchscreen, ethernet and USB and RS232 connections, circulation pump. Overall dimensions 800 x 760 x 1560 (h) mm, weight (netto) 363 kg.

Year of manufacture: 2019 Number of hours under power: 7500 h Table dimensions 1150x520 mm X axis travel: 1050 mm Y axis travel: 520 mm Z axis travel: 505 mm Rapid feed speeds: 40/30 m/mn Spindle speed: 10000 rpm Spindle taper: ISO 40 Spindle motor power: 15 kW Random-arm tool magazine: 30 stations Tool type: BT40 Spindle/table nose distance: 80/585 mm CNC FANUC OiMF RJ45 & RS235 ports HEXAGON infra-red transmission tool and part probes High-pressure spraying: 30 bars centre-spindle Shower cabin watering Spindle cooler Electrical cabinet air conditioning Chip conveyor 30 tool holders Full documentation Very good condition Visible under power Price excl.

Description: 5,705 KWp New solar modules 2x Canadian Solar CS3L-360MS, 1x Longi LR4-60HPB-360M, 1x Jolywood JW-HD120N-380, 3x Denim M2B375BT620H, 2x Longi LR4-60HPH-375M, 3x Risen RSM40-8-390MB, 3x URECO FBK400MFD solar modules packed ever 15 solar modules on a pallet. Pallet NO. 3 Nominal power per solar module: 360 Wp - 400 Wp Condition of solar modules: New Logistical data solar modules: 1,770 mm x 1,048 mm x 35 mm, 1,754mm x 1,037mm x 34mm, 1,756mm x 1,038mm x 35mm, 1,754mm x 1,037mm x 35mm, 1,254mm x 1,038mm x 35mm, 1,750mm x 1,095mm x 30mm, 1,722mm x 1,133mm x 30mm Logisticdata: Dimensions pallet: approx. 1,850 mm x 1,200 mm x 675 mm Weight pallet modules: approx. 332 kg Total weight: 332 kg Total packages: 1 Illustration similar. Approx. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 675 mm, weight approx.: 332 kg

Punching machine FINN POWER F6, built in 1999 in Finland, is used in the process of fast and accurate punching of holes in workpieces. The punching process is performed with a high pressing force of 30 tons, on a sheet measuring a maximum length of 3061 mm, a width of 1528 mm and a thickness of 8 mm. The turret head with 20 stations and the multitool head with 10 stations (1 at rest) used on the machine allow high quality machining of the parts. During one minute, the FINN-POWER F6-25 sheet metal punching machine performs (depending on the selected mode) between 150 and 900 strokes per minute. Equipment offered with the punch press includes a SIEMENS SINUMERIK 840D CNC controller for total machine control, a new waste conveyor and two pneumatic clamps. The machine has been continuously maintained: in 2021 the oil and all filters were changed. The total weight of the machine is 13500 k ...

Description: Operating hours with pick-up:Std. 111269 with bar feeder Haas Bar Feeder , Serial 158938, chip conveyor, type SPE63/12-250Z60MN30, Serial 045750-10.1 General data: For max 20 axes, 6 spindles, 4 channels (depending on the machine equipment) - PMC System RB7 PM i-A - 15.0” Color LCD Unit C Stand-Alone Type with Touch Panel and keyboard incl. keyboard shelf Fanuc QWERTY keyboard panel and machine control panel Decentralized acquisition and output of machine signals via I/O Link iB (31iB) and Profibus Handwheel ,  ,G-code system (A), (B), C Inch/metric changeover Memory for 1000 part programs Dual Check Safety Ethernet interface on the control cabinet RS232 interface in the control cabinet Card reader and USB interface on control panel Moving to fixed stop Axis coupling Mirror axes Speed control (clamping device) Program transfer tool detailed techn ...

ILLIG RDM54K, age 2006 Preheater ILLIG VHW 72, 2-Roll ILLIG RDM54K with Indramat Servomotor Indexing Max. Film width 545 mm Double Heating, Heating Capacity 45.10 kW Max. Form area: 520 x 300 mm Indramat Servomotor Plug Assist Max. depth Draw: 125 mm Auto Transport Rail Spreading for PP Auto. Sheet Sag Control Inline Counter/ Stacker ILLIG SZA Inline Grinder ILLIG RS75b (High Version) with blower Siemens SIMATIC MULTI Panel Color Display, with Touchpad Controls Siemens S7 PLC

Permanent Overbelt Magnetic Separator TYPE DMPM800 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite mag ...

Permanent Overbelt Magnetic Separator TYPE DMPM1400 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite  ...

Permanent Overbelt Magnetic Separator TYPE DMPM1200 1.800 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.200x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 9 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite  ...

Description: Reis welding robot built in 2015 TYPRV20-16-RSVI with turntable Merkle High Pulse 551 RS welding source Machine is fully functional Approx. Onsite Dimension. (l x w x h): 3,800 x 2,400 x 2,200 mm, weight approx.: 3,500 kg

Tipper Tie mobile double clipper, machine model: RS4202, serial number: T0012731, year of construction: 10/22/98, diameter infeed pipe: 97 mm, plastic outfeed belt, belt width: 250 mm, total dimensions: 5050 mm x 1000 mm x 2050 mm.

Description: Machine number: 4717 Feed size: 500 x 3 mm Belt infeed height (with plate): 170 - 270 mm Additional device: 2-hand operation Table size: 1250 x 900 mm Plunger surface (blue): 800 x 600 mm Projection of ram center dimension stand: 510 mm Installation height center dimension (without plate): 500 mm Clamping plate thickness: 125 mm Trunnion Ø: 65 mm Smallest / largest stroke: 27 - 140 mm Number of strokes: 48 With electronic roller feed: Wanzke WVS 500 Indramat control system, serial no. 102414-1, year of manufacture 1998 With reel straightener: PBK RMC4 80/7/50 RSD GLST, serial no. BA00967, year of manufacture 2006 With minimum quantity lubrication: , Schmidt System 2000 Max. pressing force: 250 to, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 2,250 x 3,200 x 3,500 mm

Meissner GmbH & Co. kg cutter with lifter for 200 liter meat bins, type: RSM-200, machine number: 169041, 380 V, 145 A, 76 kW, volume 200 liter, plastic ejector, s/s bowl and s/s knifes, dimensions cutter: 2800 mm x 2500 mm x 1840 mm. With s/s switch cabinet: 1400 mm x 400 mm x 1860 mm.

Description: Machine Specifications: Max. Sheet Dimensions: 5040 x 1550 mm Max. Sheet Weight: 330 kg Max. Slide Stroke (X): 2520 mm Max. Stroke of Laser Head (Y-Axis): 1550 mm Max. Stroke of Laser Head (Z-Axis): 300 mm Max. Cutting Speed X and Y Axis: 20 m/min. Speed Rapid Transport X: 80 m/min. Speed Rapid Transport Y: 80 m/min. Speed Rapid Transport Z: 60 m/min. Positioning Accuracy: ± 0.01 mm/500 mm Repeatability: ± 0.005 mm Table Height: 820 mm Part Door Dimensions: 550 x 1550 mm Power Supply Voltage: 200 V (± 10 %) AC Mains Frequency: 50/60 Hz (± 1 Hz) Installed Power: 10 kVA, 3 phases Compressed Air Supply (Cutting Gas): 1000 l/min. Compressed Air Supply (No Cutting Gas): 250 l/min. Dimensions (LxWxH): 2500 x 5654 x 2275 mm Type ,Numerical Control: FANUC FS-160iLA Controlled Axes:  ,X, Y, Z (3 axes controlled simultaneously) Programming Metho ...

CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...