rs used for sale

Description: adjustable in height from 650 to 1050 mm solid and robust steel rollers roller length 360 mm roller diameter Ø 58 mm loadable weight 500 kg delivered in original packaging unused ! Approx. Onsite Dimension. (l x w x h): 1,050 x 460 x 180 mm, weight approx.: 33 kg

General SKU292W520 LocationGermany MakeDrais TypeRSV95 Main Features MaterialStainless steel Motor70 KW Specified Features - Dissolver Dissolvercheck Disc diametermax 550 mm Motor70 kW, 400 volt, (Ex) With variable speed drive200-1600 rpm With mechanical liftingcheck Motorcheck Information With switchcheck CEcheck ATEX compatiblecheck Extra SpecificationsDrum cap. 850-1350 kg, with controlNew arrivalsDissolversDraisNew arrivalsMixers > DissolversBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU292W519 LocationGermany MakeDrais TypeRSV60 No.42696 Year of construction1970 Main Features Motor44 KW Specified Features - Dissolver Dissolvercheck Disc diametermax 550 mm Motor44 kW, 400 volt, (Ex) With variable speed drive200-1600 rpm With mechanical liftingcheck Motorcheck Information With switchcheck Weight2200 kg CEcheck Floorspace3,45 x 0,90 m Total height4,0 m ATEX compatiblecheck Extra SpecificationsDrum cap. 200-400 kg, with controlNew arrivalsDissolversDraisNew arrivalsMixers > DissolversBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU292W521 LocationGermany MakeDrais TypeRSV 14/1 Main Features MaterialStainless steel Motor11 KW Specified Features - Dissolver MaterialStainless steel Dissolvercheck Disc diametermax 250 mm Motor11 kW, 380 volt, (Ex) With variable speed drive200-1600 rpm With mechanical liftingcheck Motorcheck Information With switchcheck Floorspace2,20 x 0,65 m Total height3,18 m Weight1220 kg ATEX compatiblecheck Extra SpecificationsDrum cap. 100-250 kg, with controlDissolversDraisMixers > DissolversBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Control: Heidenhain iTNC 530 Travel: X-axis: 600 mm Y-axis: 620 mm Z-axis: 520 mm Clamping surface - rotary and swivel table: Ø600 x 480mm Swivel: +10° / -90° Mount: SK 40 Tool magazine: 30 compartment t Motor spindle white: 50 - 12,000 rpm Accessories -Conveyor - Screen filter system 500 L - IKZ

grinding length:650 mm grinding width:450 mm workpiece height:425 (ohne Magnetplatte) mm max. workpiece weight:600 kg weight of the machine ca.:3,8 t total power requirement:15 kW machine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 m Used/reconditioned surface grinding machine, make GER, type RSA-650. Automatic infeed in all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked. OVERHAUL SCOPE: Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ. All guideways newly scraped in new machine geometry. Wear parts replaced, defective components repaired or replaced. Reassembly, complete functional test and internal acceptance. Machine repainted. Machine in perfect condition, ready for production. MEASURED GEOMETRIC ACCURACIES: Actual geometri ...

nominal force:160 t stroke:140 mm no. of strokes:85 /min distance between columns:400 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:400 x 450 mm table height over floor:800 mm Allowed max. force:230 t ram surface:400 x 320 mm spindle diameter:125 mm power requirement:7,35 kW weight:5,0 t dimensions (WxDxH):1,7 x 1,2 x 2,9 m

pressure:400 t stroke:280 mm no. of strokes:56 Hub/min distance table/ram, max. stroke up, adjustment up:680 mm table surface area:560 x 750 mm allowed max. force:600 t blow die to die:800 t spindle diameter:200 mm ram surface:560 x 560 mm height over floor:4,1 m power requirement:37,0 kW weight:12,0 t dimensions (WxDxH):2,2 x 2,0 x 4,25 m

CONTROLS   CNC controls HEIDENHAIN I TNC 530 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 1500 mm   Y-axis travel: 800 mm   Z-axis travel: 1000 mm   rotating range B-axis from: 90 °   rotating range B-axis up to: -90 °   rotating range C-axis from: 0 °   rotating range C-axis up to: 360 ° TABLE   table surface (left-right): 1480 mm   table surface (front-back): 800 mm   clamping surface diameter: 802 mm   workpiece load (max): 1500 kg SPINDLE / HEAD   spindle revolutions (max): 16000 /min   tool fixture: HSK A63   drive power: 48 kW TOOL MAGAZINE   number of positions: 60 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequ ...

CONTROLS   PLC SIEMENS S7 300 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE   length: 9000 mm   width: 350 mm ELECTRICAL SPECIFICATIONS   total power consumption: 278 kW   mains power supply: 450 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 10300 mm   space requirements -front/back-: 2500 mm   total height: 2650 mm   total weight approx.: 9000 kg 3-lane system with 350 mm usable width each Process sequence: Stage 1:         Cleaning (70 degrees) Stage 2,3,4,5:   Rinsing (65, 60, 60, 55 degrees) Stage 6:         Hot air drying (65 degrees) Oil separator:   continuous oil discharge Heating:      ...

CONTROLS   PLC SIEMENS S7 300 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE   length: 7000 mm   width: 1040 mm ELECTRICAL SPECIFICATIONS   total power consumption: 145 kW   mains power supply: 267 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 7400 mm   space requirements -front/back-: 2350 mm   total height: 2300 mm   total weight approx.: 8000 kg Continuous conveyor belt 1040 mm wide, separated into 3 lines Process:Stage 1:       Cleaning (65 degrees)Stage 2,3,4:   Rinsing (65, 60, 60 degrees)Stage 5:       Heating air drying (60 degrees)Oil separator: continuous oil discharge Heating:       electrical heating Convey ...

Key data: 1100 mm

Wide belt sanding machine Ott Type: RSKO 1100 Grinding width 1100 mm 1 combi unit sanding belt Connected load 14.5 kW

C arc Siemens Siremobil ISO - C to give

ICONOS R100 Polydoros SX 65/80 Opti 150/40/80 HC-100 VIDEOMED DI C. last major quality check: March 2014

Concrete tester Hilti Ferroscan FS10 Monitor RV10 Scanner RS10 Type Ferroscan FS10 consisting of: -Monitor RV10 -Scanner RS10 -Charger TCU12H -Battery Pack RB 10 -in shock-resistant plastic case The memory of the device is defective. The device works properly, but as soon as you turn it off, it loses the recorded data. The portable Ferroscan system is used for large-scale, fast and simple -Detection and identification of reinforcement iron in Concrete substrates -Measurement of overlap, diameter and position of Reinforcements in concrete substrates e.g. for testing the reinforcement in concrete parts, Walls or ceilings -Measurement of safety-relevant purposes, e.g. for structural engineering -Additional advantage: By locating the reinforcements avoid accidents and damage caused by hits iron, pipes and electrical wires." Bcsepogfc3 The Ferroscan system i ...

; Mileage [km]: 6; Power [PS]: 300

Offered is a digital X-ray - workplace, type Siemens MULTIX choice DR Year 2012 in very good condition. System is still in clinical use and will be released beginning March, 2015.

; Mileage [km]: 8; Power [PS]: 450

; Mileage [km]: 6; Power [PS]: 290

; Mileage [km]: 8; Power [PS]: 500

Hydraulic radial engine Manufacturer Denison/Calzoni Type MR300D - F1N1N2S2NX 0401 / 46529, 742056 250 bar Used from Husky injection moulding machine type GL225 RS60/50

Multifunction - X-rays Built in 2002, in good condition

CT with almost new X-ray tube Assembly

Multifunction X-ray machine Built in 2005 Generator Poydoros SX 65/80 Image storage LIH (last image hold) Image intensifier 23 cm Tube Optitop 150/30/50 Very good optical condition

Part number: PE8P 120A 620/4 LS 325 / O 401 878 091 Controller RSUV250-800 P10A318A Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Lithotripter with X-ray unit in good condition

Durchleuchtungdgerät Siemens SX sire scope In good condition

; Mileage [km]: 8; Power [PS]: 400

; Mileage [km]: 6; Power [PS]: 240

; Mileage [km]: 6; Power [PS]: 280

; Mileage [km]: 6; Power [PS]: 530

X-ray Generator to give 80 CP type Super

PE12P110A520/5RS508 D 401 870 070 / RSUV 300-1150 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

; Mileage [km]: 8; Power [PS]: 420

; Mileage [km]: 8; Power [PS]: 530

; Mileage [km]: 6; Power [PS]: 330

; Mileage [km]: 8; Power [PS]: 420

; Mileage [km]: 8; Power [PS]: 450

Surgical image intensifier (C - arm) Ziehm Exposcop 8000 with dual monitor. Digital multiple image memory, Sony video printer in good condition

; Mileage [km]: 6; Power [PS]: 280

; Mileage [km]: 4; Power [PS]: 100

Manufacturer: Noise Model: RS4/1000 machines no.: 5123/706 Year of construction: 4/1989 weight: approx.: 540 KG General information / technical data: used mechanical vertical Innenräummaschineim of very good immediate quiet machine running Zugkraftbei 3m / min: 4000 KG Räummgeschwindigkeit: 3m / min and 5m / min Return speed: 10 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Engine power: 2.2 / 4,7KW Stromversorgung380 Volt 50 HZ Optional accessories: -Kühlmittel / thread cutting fluid pump electric power meter -electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) Comment: The double spindle drive ensures a quiet and central point of the train, as well as a  ...

They are offered from a working measuring machine Electronic components and Heidenhain External impulse formers All prices VB or against bid 1st 1St Renishaw Autochange Control Unit ACC2-2 Closing at the back: Pics in ; Pics out ; RS232 ; CMM ; Rack Price 890.-EUR 2. 1 Pcck Renishaw Probe Head Controller PHC 10 Serial K14908 Connection at the back: output ; IEEE ; RS232 ; Head ; PHD10 Price 490.-EUR 3. 1 Pcs Renishaw Sample Interface Price 490.-EUR 4. 3 Stueck Heidenhain External Pulse Converter Electronics (Measured value converter) EXE 610 C with manual Price 190.-EUR / Stck Special price

; Mileage [km]: 6; Power [PS]: 300

; Mileage [km]: 4; Power [PS]: 110

; Mileage [km]: 6; Power [PS]: 350

; Mileage [km]: 6; Power [PS]: 400

Heart Angio system in very good technical and optical condition as good as new!

This evaporative dryer was built in Hungary by DKG-EAST RT in 1995. The equipment was transported to Finland, where it was inspected by Finnish Inspecta in 1999. The original purpose of this equipment was to concentrate waste water solution from a molasses production process by evaporating water, but the system was never installed. The certified pressure for the equipment is max 2.0 bar, min -1.0 bar. The input heat for the evaporation comes from steam of 200 °C. The equipment is suitable for similar purposes, concentrating waste water streams from various processes and thus reducing the amount of waste water to handle. Capacity in molasses wash water evaporation: Input of thin stillage: 30.0 t/h, 8.5 % Output of product stillage: 3.54 t/h, 72 % Steam input: 3.9 t/h, 200 °C, 11018 MJ/h Heater 1. Price 90.000 € Nominal heat surface 512 m², actual heat surface 518 m². Max ...