rolling conveyor used for sale

Durma HRB 4-3025 CNC Plate Rolling Machine Machine is in good working condition

ROLL DIAMETER 550 mm POLL WORKING LENGTH 1530 mm MOTOR POWER 110 KW DIMENSIONS: 630022301830 (L×W×H) SPEED RATIO OF ROLLS 1:1.27 Structure description 1 Base frame is welded and annealed . 2 The motor is 3- phase asynchronous motor, protection levels :IP54. 3 The driving type :Single out- shaft or double out- shaft. The speed reducer is hard gear reducer,which has long service life and low noise. 4 The roller bearing is rolling bearing with Low noise, save power almost 20%. the roller bearing use grease lubricating. 5 The nip adjusting Motor type 6 This machine is equipped with two pieces of moving blade. 7 Safety device : Pull the safety rod to achieve emergency stop. It can be installed with kick stop device and emergency stop device for safety. 8 The electrical design theory conform to the TWO ROLL MILL specifications strictly . It is equipped  ...

Sahinler 4R HS 20-150 4 rolls plate rolling machine Working length : 2050 mm Machine is in good working condition

Tangential grinding Kent brand Model KSG63-FD1 Table 300x600mm Availability: starting from April 2024 Year 2000

Reed 40” x 16” Two Roll Mill Hand operated nips Right angle drive Tray fitted beneath Mill Rolls

Used Faccin 2621 b3 Plate rolling machine Used machine visible in Italy, sold as it is

Qty. 1 Second-hand 4-Hi Non-Reversing Rolling Mill – still in operation! Mfc.: Lheung-Maschinery, Yushin Heavy Electric, Mitsubishi Built: Not specified! Rebuilt: 2017.08 Material: Aluminum & Aluminum Alloy Line speed: 80 m/min. Strip width: 550 mm Thickness: 0.3 – 6.3 mm Coil size: ID 508 mm OD 1500 mm Weight:

Berstorff Cracker Mill with Roll dia 600 x 800mm Description attached!

Working length 2050 mm Maximum sheet thickness 4 mm Roller diameter 140 mm

Machine in good technical condition. Machine weight: 5300 kg Max. circling length: 2000 mm Max. sheet thickness: 12 mm Diameter of the upper cylinder: 220 mm Diameter of the lower cylinder: 200 mm Encircling speed: 6.2 mm/min

Capacity: 4250 x 8mm Hydraulic drive on the main role 3 roll driven Digital reading on the clamp and bending roller

YEAR 2013 THREAD ROLLING MACHINE EXCELLENT CONDITION

Key data: 560 , 1500

Mixing mill 560 x 1500 mm Buzuluk Type 14203 Roller bearing Motor: 132 kW Motorized NIP adjustment

The machine is in good technical condition. Max. length of circled sheet: 2000mm Max. thickness of circled sheet: 4mm It is fully functional and without defects. It is quiet and fairly accurate. By prior arrangement, the possibility of a tour in progress.

UBR32x2500 sheet metal rolling mill Year of production 1969 Dismantling, transport and all related costs are the responsibility of the buyer

Disma Model 13-TLS motorized cylinder with 1050mm tempered roller. Rollers diameter 90mm. Voltage 3PH/380V

Rolling mill 1000x1000

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 58 mm output - pieces/min 250-480

Rieter Fine Rolling Mill - GSA 1,000800

CNC Thread Rolling Machine - Thread Rolling Machine Thommen PR17 CNC 2 wheels Rotation speed of the rollers electronically controlled Position and speed are managed electronically Spindle diameter 54 mm 2 pairs of columns (closed and open) The machine is in our warehouse in Gussago BS, energized Test run possible Mimu Machine Tools

Velocity: Adjustable roller: 24/28 rpm = 15.1/17.6 m/min Fixed roller: 34 rpm = 21.3 m/min Friction: Switchable from 1 : 1.2 to 1 : 1.4 Power: Three-phase motor, 11 kW, 400 V, 50 Hz Roller temperature control: Chamber-drilled rollers with rotary unions Bearing: Sliding bearing Bearing lubrication: Oil Circulation Lubrication Gap adjustment: Manually by ratcheting Material guide jaws: Two-piece with centrepiece, non-folding Electrical control: Conventional contactor control Safety: Rocker above the rollers, emergency stop buttons on the side stands and knee switch plates

Suitable for dough thicknesses from 1 to 3 mm.

ORT 3RP48 CN CNC / PLC thread rolling machine scaffolding sleeves threading, shelves studs threading electronic overhaul/retrofit Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools

available Cracker Mill Rolls dia 600 x 800mm Description attached!

Thread rolling tool, threaded roller set, thread rollers, thread rollers Manufacturer: IKON Thread designation: M14, Right Roller outer diameter: 166 mm Roll width: 160 mm Bore diameter: 70 mm Suitable for spindle diameter: 69.85 mm Reground good condition We have over 100 different rolling tools from different manufacturers in stock: PROFIROLL, PEE-WEE, IKON , EMUGE, MAPAL, GROB, GEMA, HSV and others suitable for thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine manufacturer PEEWEE, Profiroll, SENY, GROB, Wanderer etc.; used

Roller diameter: 550mm, roller width: 1500mm, connected load: 75kW, without documentation, accessories or spare parts, an inspection is possible, the machine was used to process silicones with colors, fillers and other additives.

Usable roll width: 420mm, roll diameter: 10-73mm, output: 50 cycle/min, connected load: 1.4kW, length: 1035mm, width: 1084mm, height: 1620mm, weight: 363kg, operational hours counter: 400h, with documentation.

UPW 25x100 Thread rolling machine Available 2 machines. Pressure 25TONS Max. Workpiece Diameter 100mm Min. Workpiece Diameter 10mm Thread Length at Plunge Operation 180mm Thread Length at Continuous Operation 2000mm/80mm Distance Of Roll Spindles 150/325mm Length Of Roll Spindle Fixtures 180mm Dia. Of Rolling Tool 230mm Roll Spindle Turning Speed Range 20-90 U/Min Shaft Dia 63mm Weight 3,25 tons

Refer to code 1020 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1021 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1022 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1023 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1024 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1025 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1026 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1027 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1028 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1029 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1030 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1031 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1032 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1033 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1060 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1034 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1035 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1036 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1037 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1038 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1039 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.