rolling conveyor used for sale

Thread rolling machine make FETTE type R 40Fabr. -No: 818 built in 1980Technical specifications:Metric thread rolling range: 12 - 39 mmThread rolling range inch: 7/16 - 1 1/2 large rollable thread length: 500 mmSpindle passage: 46 mm6 spindle speeds: 250 - 2000 rpm.Gr. clamping diameter of the vice: 70 mmClamping stroke: 40 mmInfinitely variable feed rate: 600 - 3500 mm / minRapid forward / rapid return: 9 m / minTotal power requirement: 18 kWDimensions L x W x H: 1830 x 900 x 1145 mmWeight approx: 1000 kgWith- Hydraulic unit for clamping and feeding- cooling device- separate control cabinet- Thread rolling head FETTE type FU 34/1used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your  ...

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...

rolling capacity max.: NA t workpiece diameter: 38 mm workpiece length: 500 mm total power requirement: 24 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. Originally, external gears were formed on the machine using  ...

Rolling pin or croissant roller for croissant forms Bakery - Confectionery 2- Rows

Power: 0 t Thread diameter maximum: 0 mm Thread diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. diameter threaded: 2 mm Max. diameter threaded: 48 mm Max. rolling force: 12 to Shaft diameter: 54 mm Voltage 50 Hz 3x: 400 Volt Connection power: 14 kW Machine´s weight about: 2400 kg Overall dimensions machine: Length: 1850 mm Width: 1250 mm Height: 2000 mm

Technical data Min. diameter threaded: 27 mm Max. diameter threaded: 90 mm Min. pitch: 1 mm Max. pitch: 6 mm Max. infeed length: 68 mm Max. roll die diameter: 150 mm Roll die width: 35,70 mm Max. rolling force: 17 to Roll axis swivel for thru-feed: 3 ° Shaft diameter: 54 mm Roll speeds: from: 150 rpm up to: 500 rpm Voltage 50 Hz 3x: 400 Volt Motor power: 7.5 kW Machine´s weight about: 2420 kg Overall dimensions machine: Length: 2200 mm Width: 1900 mm Height: 2000 mm

Technical data Min. diameter threaded: 10 mm Max. diameter threaded: 75 mm Min. pitch: 1 mm Max. pitch: 10 mm Max. infeed length: 148 mm Max. roll die diameter: 200 mm Roll die width: 35,70,100,150 mm Max. rolling force: 60 to Roll axis swivel for thru-feed: +6/-6 ° Shaft distance: min.: 195 mm max: 275 mm Shaft diameter: 70 mm Roll speeds: from: 20 rpm up to: 50 rpm Voltage 50 Hz 3x: 400 Volt Motor power: 18.75 kW Machine´s weight about: 4700 kg Overall dimensions machine: Length: 2450 mm Width: 2300 mm Height: 2250 mm

Technical data Min. diameter threaded: 8 mm Max. diameter threaded: 50 mm Min. pitch: 1.0 mm Max. pitch: 6.35 mm Max. roll die diameter: 178 mm Roll die width: 35 -150 mm Max. rolling force: 40 to Shaft distance: min.: 170 mm max: 230 mm Shaft diameter: 70 mm Roll speeds: from: 20 rpm up to: 60 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 11/3.65 kW Machine´s weight about: 2750 kg Overall dimensions machine: Length: 2000 mm Width: 1450 mm Height: 1800 mm Various accessories: Set of thread rolls Lamp Set of service tools Foot pedal

Technical data Min. diameter threaded: 6 mm Max. diameter threaded: 30 mm Min. pitch: 1.0 mm Max. pitch: 3.5 mm Max. roll die diameter: 148 mm Roll die width: 35 - 70 mm Max. rolling force: 17 to Shaft distance: min.: 130 mm max: 175 mm Shaft diameter: 54 mm Roll speeds: from: 20 rpm up to: 60 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 3.65/2.19 kW Machine´s weight about: 1220 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 1340 mm Various accessories: Set of thread rolls Lamp Set of service tools

Technical data Min. diameter threaded: 6 mm Max. diameter threaded: 30 mm Min. pitch: 1.0 mm Max. pitch: 3.5 mm Max. roll die diameter: 148 mm Roll die width: 35 - 70 mm Max. rolling force: 17 to Shaft distance: min.: 130 mm max: 175 mm Shaft diameter: 54 mm Roll speeds: from: 20 rpm up to: 60 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 3.65/2.19 kW Machine´s weight about: 1220 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 1340 mm Various accessories: Set of thread rolls Lamp Set of service tools

Technical data Min. diameter threaded: 4 mm Max. diameter threaded: 20 mm Min. pitch: 0.5 mm Max. pitch: 2.5 mm Max. roll die diameter: 118 mm Roll die width: 50 mm Shaft distance: min.: 100 mm max: 135 mm Shaft diameter: 40 mm Roll speeds: up to: 80 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 2 kW Machine´s weight about: 750 kg Overall dimensions machine: Length: 1170 mm Width: 740 mm Height: 1050 mm Various accessories: Set of thread rolls Lamp Set of service tools

Capacity: 0 t Diameter: 0 mm Length: 0 mm CN sections bender Manual and Automatic mode for forming discontinuous radius shapes such as Ovals Volutes Ellipses Parabolas     Horizontal and vertical:H + V  Shaft Ø:               100mm Number of rolls:       3 Horizontal:            Yes  Vertical:              Yes  Resistance moment:     33CM³ Capacity flat:         100x 20 mm Capacity Tube:         114,3 x 3,6 Ø x mm Capacity bar:          90 x 5 mm Capacity T-Profile:    100 x 100 mm Capacity HEA-Profile:  120 x 58 mm Working speed:         2,5 - 5 - 7,5 mm/min. Length:  ...

Capacity: 0 t Diameter: 120 mm Length: 0 mm MACH - ID 6233 Make: PULLMAX KUMLA Type: Z-60 CNC Control: PS/R - CNC V5 YOP: 1993 Horizontal and vertical    H + V Shaft Ø    120 mm Number of rolls   3 Resistance moment     56 CM³ Capacity flat    125 x 20 x 1300 mm Capacity Tube     115 x 1200 mm Capacity bar       65 x 65 x 1000 mm Capacity T-Profile     120 x 120 x 13 x 1200 mm Capacity HEA-ProfileUNP     240 x 1800 mm Working speed     6,6 / 6,5 M/Min mm Dimensions Length      1.830 mm Width       1.540 mm Height      1.600 mm Weight      4.600 kg

Macbending SMB200-2000/8-10 4 rolls plate rolling machine Full automatic Lifting System Side Supports Machine is like new condition

Capacity: 150 t Diameter: 470 mm Length: 300 mm SPECIFICATIONS Hydraulic / Mechanical HydraulicHorizontal / Vertical / or H + VH + V Shaft Diameter ø170 mm Roll diamter ø470 mm Shaft length300 mm Working speed M/Min.1/8 M/Min Capacity HEB 160 x 160 x 15 x Diam = 1600 mm Capacity Flatt 150 x 25 x Diam = 1500 mm  Power  16 DIMENSIONS Length  3400 mm Width  3390 mm Height  2800 mm Angle 150 x 150 x 16       Ø 1.500Angle 140 x 140 x 15       Ø 1.400T       120 x 120 x 14       Ø 1.200T       160 x 160 x 15       Ø 1.600Flat   150 x 25            &nbs p; Ø 1.500

Akbend AHS 20/06 Plate rolling machine - 4 rolls 2013

TECHNICAL CHARACTERISTICS Year 2018 Length 1000 1.5mm sheet metal Roller diameter 75mm Voltage 400V Frequency 50Hz Power 0.75Kw Current 1.9A 3PH Revolutions 1400r/min

Akyapak AHS 25/13 4 rolls Plate Rolling Machine Side supports Lifting system

Akyapak AHS-10/14x3100 Hydraulic Plate Rolling Machine Machine is in good condition

Reconditioned 3 rolls bending machine Maximum lenth: 2500mm, Maximum thickness: 15mm, Minimum rase: 300mm.

Sertom 3000 mm x 6 mm Plate rolling machine Mechanical Plate rolling machine Year 1968

Turkish 70 mm thickness 3 rolls plate rolling machine Machine is in excellent condition Bending length : 3000 mm Bending thickness : 70 mm Lifting system Pre bending Diameter of top roll : 700 mm PLC Control

UBBDA Three Roll Plate Bending Machine The three-roll sheet bending machine is designed for the production of cylindrical and conical sheet shells. Electric motors 42 kW, 580 rpm, 750\1500 rpm Dimensions 12900x5300x5620 Gross weight 166260 t

Bendmak APAS 360 hydraulic plate rolling machine Machine is in excellent condition Maximum thickness : 25 mm Top roll diameter : 350 mm

Working length : 2000 mm Maximum thickness : 10 mm Machine is in good condition http://www.akyapak.tr/kataloglar/01-Bending(TR-EN-Web).pdf

Sahinler 4R HSS 30-400 Plate Rolling Machine Bending length : 3100 mm Maximum bending thickness : 30 mm Upper roll diameter : 400 mm Machine is in good condition

Capacity: 0 t Diameter: 0 mm Length: 0 mm SPECIFICATIES Werking Hydraulisch / Servo / Mechanisch  Mechanical Horizontaal en of verticaal  Hor. As diameter Ø200 mm  Rol diameter Ø350 mm As lengte in mm    630 mm Werk snelheid in M/Min.   4.5 - 9 M/Min Buig capaciteit  IPN  120 x R 2500 mm Buig capaciteit  HEB220 x 22 x R 3500 mm Buig capaciteit  Buis  1 33 x 6,0 mm Vermogen in Kw   15 kW kW AFMETINGEN Lengte 2100 mm Breedte 2000 mm Hoogte 2100 mm  

Machine is like new Working length : 2050 mm Max. thickness : 10 mm

Working width : 2500 mm Max. thickness : 48 mm Upper roll Ø : 470 mm Lower/lateral roll Ø : 450 mm

Comal Alpha 160/20 2050 Plate Rolling Machine Machine can be seen under power

Oztas SMR-S 2070 x 170 3 rolls plate rolling machine Machine is like new condition

Sahinler 4RHSS 32-350 Plate rolling machine - 4 rolls Machine is in good condition Side supports Lifting system NC Control

Birlik 3 Rolls Plate Rolling Machine Machine is in very good condition Bending length : 3030 mm Bending capacity : 6 mm Roll diameter : 220 mm Power : 5,5+3 Kw

Manufacturer SMT-Pullmax Kumla Model PV 7 H Year 1982 Working length : 3000 mm Max. thickness : 25 mm

Cylinder faction 4 rollers and width 2 mtr. The machine is located in Spain.

Plate rolling machine - 4 rolls Manufacturer Boldrini Model / capacity 250046 mm Year 1977

Sahinler 4R HS 30-260 4 rolls plate rolling machine Conical bending is also possible Maximum thickness : 15 mm

Sahinler 4R HS 30-260 4 rolls plate rolling machine Machine is in good condition

Onaran 3000 mm x 40 mm 4 Rolls Plate Rolling Machine Roll diameter : 400 mm Bending thickness : Up to 40 mm Bending length : 3000 mm Hydraulic side supports All maintenance has been done Machine is in very good condition

Bendmak APAS 360 4 rolls plate rolling machine Working length : 3100 mm Maximum thickness : 40 mm Machine is in excellent condition

Akyapak AHS 20/16 4 Rolls Plate Rolling Machine Max thickness : 20 mm Working length : 2100 mm

Capacity: 0 t Diameter: 145 mm Length: 0 mm Make Comac Galileo 4 Type Galileo 40 Year 2011 Profile bender comac galileo 40 Outside diameter max. (mm)Section modus 6 cm3 Inside diameter max. (mm)Shaft diam = 45 Max. pipe length (mm)Roll diam = 145 Max. angleSpeed = 3,7 M/min Wall Thickness (mm)Tube 70 x 2 x 2000 Flatt 60 x 10 x 600 mm Bar 35 x 35 x 600 mm Manipulator Hor & Vert  

Length: 2600 mm Roll diameter: 10 mm Axial travel: 0 mm Make Akyapak 10 mm Type AHS 2600 Year 2004 4 walzen rundbiegemaschine akyapak 2600 x 10 Sheet thickness (mm) Bend T = 10 mm Bending length (mm) Pre T = 8 mm Number of rolls 4 roller Diameter = 210 / 190 Power = 7.5 kW Speed = 4 M / Min

Capacity: 360 t Diameter: 140 mm Length: 0 mm Make Roundo R 5 S Type R 5 S Year 1989 Section modulus 50 cm3 Outside diameter max. (mm)Top shaft = 140 mm Inside diameter max. (mm)Lower shaft = 120 Max. pipe length (mm)Rolls = 360 Max. angle Power = 11 kW Wall Thickness (mm) Weight 4000 Kg Tube = 142 x 1.800 mm HEA = 140 x 900 mm Some tooling  

It is used in rubber and plastics mixing, warming mixing, sheeting mixing, etc. III Equipment specification XK400×1000 mixing mill 1. Main technical specification NO. Item Main technology data and feature A Main technology data 1 Roll diameter 400mm 2 Roll working length 1000mm 3 Roll linear speed Front:14.85m/min Rear:18.85m/min 4 Speed ratio of rolls 1:1.27 5 Max roll space 10mm 6 Compound feeding capacity 25kg-35kg 7 Motor power 37KW,n=980r/min，IE3 8 Dimensions 4400X1710X1850mm 9 Gross weight 8500kg B Feature of main machine 1 Roll size(mm) Ф400×1000 material alloy chilled hard cast iron, surface hardness HS70±2,Surface roughness: Ra0.2 Bearing type Adopt the aligning roller bearing, copper pressure ring, bearing taper 1:12 type Front roll is drilled roll and rear roll is drilled roll, can pass cooling water, e ...

Capacity: 0 t Diameter: 42 mm Length: 3000 mm Max.Tube Ø:        42mm Min. Tube Ø:       6mm Max. Wall thickness:2,5 mm Max. Bending radius:270mm Min. Bending radius:25mm Max. bending length:3.000mm 3e dimsion bending:360,000 mm/min. Power:             5.5kW Length:            4.700 mm  Width:             1.300 mm  Height:            1.600 mm  Weight:            3.750 kg 

Akyapak AHS 8/10x2100 4 rolls plate rolling machine Machine is in good working condition

Qty. 1 Second-hand copper rolling mill Material: Copper & Copper Alloy (Pbc, Etc.), Aluminium, Etc. Manufacture: Hitachi(Japan) Type: 4-Hi Reversing Rolling Mill Strip Width: Max 450 mm Thickness: 0.3 mm ~ 4.0 mm (Copper) Line Speed: 100 m/min. Coil Weight: 5,000 kg Manufacturing Date: 1963 1st Revamping Date: 2008 2nd Revamping Date: 2010 3rd Revamping Date: 2020. 05 Revamping: Mill Housing Clean & Painting Improvement of Screw Down System (Ram Cylunder --- Geared Motor) Change of Deflector Roll & Press Plate Right/Left Reel: Increase Capacity Right Reel: 30 kW, 200/500 RPM – 110 kW, 650/1,800 RPM, Left Reel: 30 kW, 200/500 RPM – 75 kW, 400/1,500 RPM Change of Drive for 2-Coil Car: Hydrauric Cylinder – Geared Motor

Thread rolling machine make JW FRÖHLICH type GWZ 24/140Machine -No: 241401016 Year 1984Thread rolling performance: M8 - M24Shaft length: 230 mmNumber of cycles: 20 / min.Operating pressure: 130 barDrive power: 18.5 kWWith- FeedsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools