punching tools used for sale

Punching machine (heavy duty) De Groot Model Punching Year 1980 Width 600 mm Available Direct

Hydropneumatic functioning Punching power: 50 kN Height: 140 mm

Technical data: -maximum cutting force 300 kN -maximum punching diameter up to 88.9 mm -Max that material thickness 6.35 mm -Work area without putting up 1000 x 2000 mm -Actual workspace 1145 x 2100 mm -Work area normally with putting 1000 x 4000 mm -Size work table 1000 x 3500 mm -maximum working speeds of the axes 50 m / min -Max stroke sequence. 320 strokes/min -2 collets min. / max. distance 160-1900 mm -Need for compressed air 6 bar -Power supply 400 V / 15 kW -Space B 4200 x T H 3800 x 2250 mm -Weight approx. 6500 kg -with:-tool station 360-degree rotatable programmable 0.01 ° -CNC control - div. accessories in the separate tool Cabinet

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...

Punching machine EDEL - Maximum power: 25to. - Extension 26 cm - Height: 170cm - Width: 65cm - Depth: 50cm Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Format: A3 // Paper format: ca 31x45cm

Controlled turret punching machine, used controlled turettpunching machine, used Fabr.: EDEL Model: MICROMAT 207 HS Control/ control: LOGO 2000 (with workpiece graphics / with workpiece graphics) Built / year: 1997 Force/punching force: 20 t  Maximum sheet thickness/ max. thickness: 0.5 ... 5 mm Travel in X-axis/ travel in X : 1250 mm (expandable to / enlargeable to 2000 mm) Travel in Y-axis / travel in Y axis: 750 mm (expandable to / enlargeable to1000 mm) Punching speed / number of strokes: 20 per min Stroke stroke infinitely adjustable up to / stroke: 40 mm Punching example for steel punching 100 mm 1.5 mm ( punch diam. and thickn.) 50 mm 3.5 mm 16 mm 12.0 mm Machine weight/ weight 5 t Connection value / load: 14 kW

The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D  ...

a good blanking press Krupp Model PEKRD 250h, 250 tons, year 1980/2005, overhauled 2005, with infinitely variable drive system and Siemens S7 controls, feed system for material 0.5-6 mm, 500mm wide. With decoiler 6 tons. Built as a double-sided C-frame press so that in- and outfeed front-to-back is possible

pressure: 110 t : Ø 40x20 mm throat: 500 mm engine output: 9 kW no. of strokes: 28 Hub/min stroke max.: 80 mm weight: 3150 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 LABEL DIE CUTTING MACHINE PMC MODEL F -Year of manufacture 1990 -Four-sided guiding system jogs and holds the stacks on all four sides during the die cutting operation for precise die cutting. -Full control of stacks through feeding, guiding and die cutting eliminates manual jogging. -Convenient adjustment of guides and die with clear view of die register on labels speeds set-up and reduces waste. -Labels are safely loaded outside die cutting area. -Typical uses: labels, note pads, credit cards, identification tags, postal cards, game cards, 3-way trim, round cornering. -Materials: paper, plastic, vinyl, Mylar, paperboard Specifications Model F: Maximum Pre-cut Size 184mm x 184mm(7.25” x 7.25”) Minimum Pre-cut Size 32mm x 32mm(1.25” x 1.25”) Maximum Die Cut Size 178mm x 178mm(7” x 7”) Minimum Die Cut Size 25mm x 25mm(1” x 1”) Recommended Tri ...

Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.

Alu window profiles Punching tool for end hole ventilation 4 stations

Servoelectric punching machine AMADA EMK 3610 NT Punching force 300 kN Working range: 2500 (up to 5000 mm) x 1525 mm AMNC F Control Max sheet thickness 4.5 mm Revolver with 58 stations: 24 x A (max diameter 12.7 mm) 24 x W (max. 31.7 mm) 4 x C (max diameter 50.8 mm) 2 x D (max. 88.9 mm) Automatic indexing: 2 x W (max diameter 31.7 mm) 2 x E (max. diameter 50.8 mm) Machine dimensions LxWxH: 5430 mm x 5120 mm x 2320 mm Machine weight 24500 kg

Servo Electric punching head Large format 3000 x 1500mm With Sheet Master & Duplex carts Year: 2015 Just under 19,000 hours! With tooling

STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5

working range without repositioning X: 2535 mm working range Y: 1300 mm Control: Siemens Sinumerik 840D Punch power: 220 KN Laser power: 2200 Watt Plate thickness max.: 8 mm Beam on: 4.390 h Standard equipment: - Work range X-axis 2535mm for combined operation - Hi-Las high pressure cutting - Laser-cutting head with 5’’ lens - head quick change device - Programmable cutting gas/Pressure settings - Capacitive height regulation - Compact dust extractor - 2 sheet clamps - automatic tool change with 19 stations (21 minus sheet clamps) - Full rotation of all tools - NC-controlled, maintenance free 3-phase motor - Repositioning device - quick shut-down of hydraulic system - automatic machine shut-down - tool length compensation - chutes for parts 500 x 500 mm - punching slug suction system - metal forming possible - tool spray lubrication - Programmable stripper - adaptive stroke lengt ...

working range without repositioning X: 3085 mm working range Y: 1740 mm Control: Siemens Sinumerik 840D Punch power: 220 KN Laser power: 2400 Watt Plate thickness max.: 8 mm Beam on: 2.763 h Standard Equipment: - Working area for combined laser/punching 2585 x 1650 mm, for punching 3085 x 1740 mm, laser-cutting 3085 x 1650 mm each without resetting operation - HI-Las High pressure nitrogen cutting - laser head with 7,5 lens - programmable repositioning cylinders - quick stop function - Blow-out device for small parts - Safety light barriers - manual Additional equipment: - additional clamp and possibility to open one or a pair of clamps - Prepared for Multitool - Function tapping Automation: - TRUMALIFT SheetMaster FMC - sucker plate - Trumasort L - TRUMATOOL 40 - TRUMAGRIP New Resonator in 2011

working range without repositioning X: 2500 mm working range Y: 1270 mm Control: Bosch PNC-P Punch power: 165 KN Laser power: 3000 Watt Plate thickness max.: 6 mm Standard configuration Machine - Working Range 2500 x 1270 mm - Stable C-frame for easy access - Coordinate guide for high precision machining - Linear magazine with 19 tool stations including and 2 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning unit with programmable stripper - Brush tables - Parts chute 300 x 500mm - Chip container - Good parts container - Enclosed beam delivery via fiber optic cable - ContourLine - FocusLine - NitroLine - Seperate main switch machine and laser Punching head - Hydraulic punching head - Programmable presser foot - Tool length compensation - Spray lubrication for punches - Vacuum slug removal - forming Control - Open controller based on ...

Complete with automatic sheet storage tower

Punching machine AMADA Europe 258 Punching force / Punching force 20 ton Working range / working range: 1250mm x 2000mm (4000mm with one reposition. 5000mm or more is also possible with second reposition) Hydraulic-eccentric drive / Hydraulischer Antrieb Turret / Revolver; Total number of 27 stations: Auto Indexing: 2 x B (max dia 31.7mm) 1 x C (max. dia. 50.8mm) Roller table / ball table

Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 20 - Operating hours: 21.500 - Axis speed [X axis] max: 90 m/min - Material thickness (punching) max: 8 mm - Control type: SIEMENS 840D - Compressed air pressure min: 300 bar - Turret rotation: 30 r/min - Oil tank capacity: 330 l - Axis speed [Y axis] max: 60 m/min - Working area max: 1.270 x 2.530 mm - Punching force: 230 kN - Punch diameter max: 89 mm - Max. workpiece weight: 200 kg

Inv. Num. : 5451 Type: 1250 F1 Producer: SIMASV Created: 2011 Parameters: Compressive force: 30 t Maximum sheet thickness: 6.3 mm Maximum punching speed: 450 1/min Punching diameter: 89 mm Machine height: 2400 mm Machine length: 4200 mm Machine width: 3700 mm Machine weight: 5500 kg

Sheet metal profiling line was built in 2017. Equipment: – profiling machine – guillotine – control system – hydraulic press with an aggregate

LKI300 loading / unloading system - Control type: FANUC 04PC - Number of turret stations (pcs): 45 - Number of index tool stations, max: 4 - Punching force: 300 kN - Working area max: 2.500 (5.000) x 1.250 mm - Material thickness (punching) max: 6 mm - Dimensions (long x wide x high): 4.673 x 4.120 x 2.450 mm - Weight: 13.500 kg

Large Format 3000 x 1500mm With Automation Siemens 840

: : : : Table load:                   200Kg Working area X Axis:          2.535mm Working area Y Axis:          1.280mm Punching force:               22T Maximum sheet thickness:      8mm Turret position:              18 Positioning speed X and Y Axis:90000 / 60000 mm/min. Change speed revolver:        1,5 - 5 Rpm Length:                       6.900 mm  Width:                        5.800 mm  Height:                       2.200 mm  Weight:          &nbs ...

pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...

stroke: 70 mm work height max.: 1094 mm throat: 500 mm : 40 in 14 mm no. of strokes: 20 Hub/min throat: 500 mm : 80 to engine output: 9 kW range L-W-H: 1980x1150x2000 mm weight: 2000 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 500 mm stroke: 60 mm : 38 /min. engine output: 5 kW weight of the machine ca.: 1.150 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t hole diameter in sheet thickness: Ø 40 in 10 mm throat: 750 mm stroke: 60 mm : 38 Hub/min engine output: 5 kW weight of the machine ca.: 1.885 kg Overall size: 1500x1100x2000 mm Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 500 kN hole diameter in sheet thickness: Ø 27 in 13 / Ø 28 in 10 mm no. of strokes: 23 Hub/min throat: 130 mm stroke: 30 mm total power requirement: 3 kW weight of the machine ca.: 295 kg Overall size: 1100x900x1550 mm Standard equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate length: 2525 mm plate thickness: 6,4 mm Punching capacity: 200 kN speed of positioning X: 50 m/min speed of positioning Y: 50 m/mih no. of strokes: 200 / 400 Hub/min control: MNC 32000 ATC: 22 Pos total power requirement: 7,5 kW weight of the machine ca.: 21,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 30 t Number of strokes per/min: 0   Day light: 0 mm Front distance between columns: 0 mm CNC Brand: Siemens CNC Model: 840 D MACH-id    5212 MAKE        FinnPower TYPE          C5 Compact Express YOP            2009 SPECIFICATIONS Table load in kG       200 Kg Working area X Axis      2584 mm Working area Y Axis        1270 mm Working area X Axis with override       5168 mm Punching force      30 T Maximum sheet thickness       8 mm Turret position        20 Auto indexing positions        2 x Multi tool Positioning speed X and Y Axis      10800 mm/min. Change speed revolver      166 Rpm  ...

pressure: 40 t stroke: . mm no. of strokes: . Hub/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

punching pressure: 28 t punching cross-cut in cmm: 31 in 7 mm round bar steel: 32,0 mm throat: 250 mm dayligth: 223 mm no. of strokes: 10 - 30 Hub/min oil volume: 32 ltr. work height max.: 1.033 mm total power requirement: 3,0 kW weight of the machine ca.: 553 kg. dimensions of the machine ca.: 730 x 540 x 1530 m Furnishing: - Quick-change punch device up to Ø 31 mm - green series - - built-in: round punch no.5 Ø 25.0 mm and round die no.3 Ø 25.7 mm - Free: LED lighting in the punching area - swiveling scraper (plates exchangeable) - Various material support tables are available separately - support frame - 2-step foot switch, with double press for grain search function - electrical controls - Infinitely adjustable stroke length and stroke position - Integrated hydraulic unit with oil filling - Performance data apply to a material strength of 450 N / mm² The data for this ad was cr ...

pressure: 63 t no. of strokes: 70-420 Hub/min sheet width: 160 mm ram - range of adjustment: 80 mm : 300 mm table surface area: 750x660 mm ram surface: 690x460 mm total power requirement: 11 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2500x2500x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...

automatic full punch for cardboard & plastic Manufacturer - Ruge & Singer Model: 7404 Year: 2010 Location: germany Material Condition - used, little time in use, as the purpose is no longer given. Accessories - tool kits Price: on request

stamp capacity: 2 - 63 mm throat: 110 / 200 mm Various Destaco punching iron, some with accessories: No. 1 & 2: Type 101-200, accessories: one punch + one die, technical data: see picture, price per piece: 150,- No. 3 & 4: Type 102-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories: 350,- No. 5: Type 104-200, accessories: 2 punches and 3 dies, technical data: see Picture, price: 350, - No. 6 & 7: Type 103-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories 500,- 1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR 1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, material thickness 3 mm in max. 40 kg/mm². pice 120,-- EUR Diverse punching dies. We  ...

Compact machine system for the production of stamped and bent parts made of strip and wire. Tool quick clamping system for shortest set-up times User-friendly machine and process control P CNC 4E Compatibility with RM 35, RM40 and RM4 tools Item condition: very good You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Compact machine system for the production of stamped and bent parts made of strip and wire. Tool quick clamping system for shortest set-up times User-friendly machine and process control P CNC 4E Compatibility with RM 35, RM40 and RM4 tools Item condition: very good You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Compact machine system for the production of stamped and bent parts made of strip and wire. Tool quick clamping system User-friendly machine and process control P CNC 4E Compatibility with RM 35, RM40 and RM4 tools Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Bihler RM 30 E punch bending machine Bihler RM 30 E punch bending machine for the production of stamped and bent parts made of strip and wire. Compact machine system for the production of precision stamped bent parts User-friendly machine and process control Bihler P CNC 400 Compatibility with RM 35, RM40 and RM4 tools Year of construction 2003 Machine housing and perforated plate Specifications Machine power: 5 - 400 strokes/min Feed length: max. 240 mm Backing edge of the strip: max. 80 mm in front of perforated plate Strip bottom edge: 4 mm above center machine Material dimensions: strip width max. 60 mm, wire Ø max. 4 m Material feeder right (176-05-00195.0) 240 mm feed length Specifications Material trailing edge: 80 mm in front of perforated plate Material bottom edge: 4 mm above center machine Material width: max. 60 mm Feed length: max. 240 mm  ...

Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßer CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 20 - Turret rotation: 166 r/min - Operating hours: 48.000 - Axis speed [X axis] max: 150 m/min - Compressed air pressure min: 6 bar - Control type: Siemens Sinumerik 840D - Punch diameter max: 89 mm - Power supply: 80 kVA - Axis speed [Y axis] max: 150 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 300 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thickness aluminium max: 50 mm - Material thickness steel Fe52/Fe37 max: 4 mm - Oil tank capacity: 400 l - Material thickness stainless steel max: 3 mm - Weight: 28.000 kg

Peddimax 1002 combi punch/shear/notching with CNC Siemens X amp; Y positioning table for punchstation with CNC MPS pushfeed system gt; 6 meter for auto cutting flat steel (with hydraulic workpiece clamping) with conveyor belt for cut pieces central lubrification Dia x sheetthicknessdia: dia 31 in 25 mm / dia 90 in 10 mm Depth of throat 510 mm Max hole dia. Ø 90 mm Max cutting-thickness in plate: 500 x 20 mm Blade length 510 mm 90°-cut corner 150 x 150 xnbsp; 12 mm 45°-cut corner 100 x 100 x 12 mm Cut to length round/square 50 mm Max material -thickness by notching: 90 x 52 x 13 mm Punching pressure: 100 ton Power needed: 11 kW Length: 1980 mm Depth: 1020 mm Height: 2060 mm Weight: 3 ton

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

Section Cutting - round bar: 50 mm - square bar: 50 mm - C amp; I profiles: up to 160 mm Notching - rectangular: 52 mm - material thickness: 13 mm Punching - 33 x 20 mm - 30 x 20 mm - 55 x 12 mm - 38 x 15 mm - bending cap: 250 x 20/10 mm Shearing Flatbar - 380 x 20 mm - 480 x 15 mm - angletrim: 120 x 15 mm Angle Cutting - at 90°: 150 x 15 mm - at 45°: 80 x 10 mm Punching pressure: 85 ton Max sheet thickness by punching + nibbling: 33 x 20 mm Max punching dia: 55 x 12 mm Length: 1830 mm Depth: 790 mm Height: 1920 mm Weight: 2620 kg