punching tools used for sale

Type: Die-sinking EDM machine Number: 21958 Category: Die-sinking EDM machines / EDM Manafacture: Makino Model: EDAF 3 Year of construction: 2016 Travel: 450 x 350 x 350 mm [ X x Y x Z ] Table size X: 700 mm Table size Y: 500 mm max. workpiece size X: 850 mm max. workpiece size Y: 650 mm max. workpiece size Z: 400 mm max. workpiece weight: 800 kg C-axis Linear scales (X,Y,Z) Control Hyper i Super Spark iV Super Surface Super Edge (incl. MF 4) Super Surface Graphite EROWA Robot Interface (A-Type)

3D probe for CNC machine tools RENISHAW MP3 with accessories Size: SK30 Dimensions: 330 x 210 x 130 mm Weight: 2.5 kg

Tool holder for pressing tools PAGUS 630 x 140 mm groove length: 845 mm groove width: 80 mm groove depth: 14 / 10 mm ( lower part / upper part ) Working area: length: 630 mm, width: 140 mm, height: 40 - 280 mm 4 guide rods: Diameter: Ø 40 mm, length: 425 mm material thickness (lower part / upper part): 75 mm used, tested ! Dimensions: 840 x 250 x 500 mm

Post Power Tools, High Frequency Tools, High Frequency Machines FINE 300 Hz 8 x Drill 2 x Jigsaw 1 x Angle Grinder (small) 1 x Rod Grinder Total 12 handheld tools. 220 V 300 Hz used, checked! unchecked! position can also be halved. Dimensions: 600 x 400 x 420 mm

General: Year of construction: 1998 Travel: X 350 mm, Y 250 mm, Z: 300 mm Table size 500 x 400 mm Workpiece dimensions Max. 500 kg Weight approx. 2,350 kg Other equipment and included accessories: Tool changer Tool holder system 3R

Stock Number: 3805 Machines vice Manufacturer: ROEHM, Type: RKK 2 Machine NO.: 983 004 N Specifications: Width 115mm Max. öfning das schaubstock 0-170 mm Length: 350 mm, Height: 133 mm, Width: 125 mm, Weight: 33 Kg

Stock Number: 3806 Machines vice Manufacturer: ROEHM, Type: RKK 2 Machine NO.: 151953 0004 P, Year of manufacture: 0 Specifications: Width 115mm Max. öfning das schaubstock 0-170 mm Length: 350 mm, Height: 133 mm, Width: 125 mm, Weight: 33 kg

Capacity: 250 tonnes Factory no. 233 A

Inv. Num. : 6949 Type: VL600 Q Producer: SODICK Created: 2015 Parameters: Table length: 1040 mm Table width: 780 mm Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 270 mm Minimum wire thickness: 0.1 mm Maximum wire thickness: 0.3 mm Machine height: 2080 mm Machine length: 2605 mm Machine width: 2620 mm Machine weight: 3140 kg

: mit Absaugvorrichtung frequency: 60 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 mm, 400 mm, 210 mm

Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg

Key data: 750 mm, 500 mm, 64 A

Inv. Num. : 5896 Type: Roboform 54P Producer: Charmilles Created: 2002 Parameters: Table dimensions: 750x500 mm Maximum operating current: 64 A Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 450 mm Container dimensions: 1200x775x385 mm Machine weight: 3000 kg Equipment: Tool changer C-axis

Key data: 750 mm, 500 mm, 64 A

Inv. Num. : 5897 Type: Roboform 54P Producer: Charmilles Created: 2000 Parameters: Table dimensions: 750x500 mm Maximum operating current: 64 A Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 450 mm Container dimensions: 1200x775x385 mm Machine weight: 3000 kg New Source

Key data: 410 mm, 260 mm, 210 mm

Inv. Num. : 6039 Type: 254Y Producer: Hitachi Created: 2004 Parameters: Control System: MARK-10W Feed length X-axis: 410 mm Feed length axis Y: 260 mm Feed length axis Z: 210 mm Axle U: 200 mm Axis V: 200 mm Wire diameter: 0.25 mm Max. workpiece dimensions: 680 x 520 x 210 mm Max. workpiece weight: 410 kg

Inv. Num. : 6587 Type: A04B-0239-B032 Producer: Fanuc Created: 1990 Parameters: The machine is in good technical condition.

Key data: 320 mm, 220 mm, 180 mm

Inv. Num. : 6869 Type: Robocut 0iA Producer: FANUC Created: 2000 Parameters: Control system: FANUC Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 180 mm Feed length in the U-axis ( -): 120 mm Feed length in the V-axis ( -): 120 mm Machine weight: 1200 kg

Key data: 400 mm, 300 mm, 300 A

Inv. Num. : 6945 Type: 433GS Producer: Penta Created: 2016 Parameters: Control system: PENTA Duty cycle: 2935 h Operating hours: 1154 h Work table length: 700 mm Work table width: 350 mm Max. travel length of the X-axis: 400 mm Max. travel length of the Y-axis: 300 mm Max. travel length of the Z-axis: 300 mm Max. workpiece weight: 700 kg Equipment: Technical Documentation Accessories

Control: PC-NC Dialog Specifications: Travel X/Y/Z: 525/400/450 mm Working container W/D/H 770/670/440 mm C-axis 30-fold electrode changer Support surface work table 750x650 mm Load capacity 1000 kg Weight 4360 kg

Stock number: 3846 Angetribende Tool Manufacturer: Eppinger , Type: 9.654.088 Year of construction: 0 Specifications: VDI-40 Size Winckel 90 Insert Type ER32 External Cooling Speed max 5000 rpm Motor Power Driven Tools 40Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3848 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 2 Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3849 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 3, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3850 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.099 Machine NO.: 5, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor power driven tools 70 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3851 Angetribende Tool Manufacturer: WTO, Type: 410520135-40 Machine NO.: 5, Specifications: VDI-40 Size Winckel 90 Insert type ER32 - K19-09608-1.1 Internal Cooling Speed max 6000 rpm Motor power driven tools 63 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M

Stock number: 3852 Angetribende Tool Manufacturer: Eppinger , Type: 4.200.952 Machine NO.: 7 - 296747-1 Specifications: VDI-40 Size Straight Insert Type ER32 Internal Cooling Motor power driven tools 50 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3853 Angetribende Tool Manufacturer: Benz, Type: 114EA04941E6 Machine NO.: 8, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3854 Angetribende Tool Manufacturer: Benz , Type: 114EA04941E6 Machine NO.: 9, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

For sale is: 1 Piece Used CNC Horizontal Bending Machine Manufacturer: Ehrt Maschinenbau GmbH Type: EB 40 CNC Year: 2001 Press force: 400kN Connected load: 5.5kW For more technical data, see photos. incl. complete documentation The machine can be viewed in our warehouse in 09599 Freiberg.

Inv. Num. : 7097 Type: AD3L Producer: SODICK Created: 2010 Parameters: Max. travel length of the X-axis: 300 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 250 mm Maximum table load: 580 kg Number of axles: 3 pieces

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, tool box -Tool box: with non-sparking tools -Content: see photos -Dimensions: 430/200/H230 mm -Weight: 28kg

Axis X ... 350mm Axis Y ... 220mm Axis Z ... 220mm Machine weight ... 2100kg Max. workpiece weight ... 750kg Max. workpiece length ... 1000mm Max. workpiece height ... 220mm Max. workpiece width ... 550mm The machine is in good condition, possible to test under electricity.

Haas SL-10T CNC Lathe New turning tools are also included(paid approx. €3440), chuck (packs) for individual production and chuck (cartridges) for working from bar. The machine is in operation and the condition and accuracy can be tested. The lathe has an arm with a probe for quick tool presetting. Maintained regularly.

Tools are included Well equiped, good condition Shafts diameter mm. 50

LVD Parma 1212 TK CNC Punch Press 20 Ton Many tools are included Machine is in good working condition

Durma TP123 CNC Punch Machine 30 Ton including tools Machine is like new condition

Gebr. Slotting tool / window milling tool Extensive milling tool as shown mainly from STEHLE for 40mm spindle Drawings are partly available from various milling cutters To self-collectors.

Nice entry-level assortment: 16 milling heads and 6 grooving discs, etc. Some profile milling heads, radius milling cutters large, groove discs, adjustment groovers, rebate head, glue milling cutters, flattening cutters, swivel cutter heads, universal profile heads with various used profile knives and various thrust rings, as well as many new inserts All cutters for 30mm mandrels. Sale only complete as shown and only to traders, not to private individuals. In sturdy steel cabinet with four pull-outs. Dimensions approx. 600 x 800 x 1000mm, weight approx. 230kg Trolley board included The milling cutters can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

CNC Wire EDM Machine FANUC MATRA ROBOCUT a-1iA5 Year of construction 2001 Travel: X-axis 520 mm Y-axis 370 mm U-axis 120 mm V-axis 120 mm Z-axis 310 mm Max. workpiece dimensions: 790 x 730 x 300 mm Max. workpiece weight 1,000 kg Wire diameter 0.1 to 0.3 mm Wire feed speed 250 to 2500 g Max. taper angle +/- 30°/ 80 mm Control: FANUC Series 16i-W Machine weight: approx. 2,600 kg

Shipping within Germany 8.- insured

Key data: 572 mm, 400 mm, 32 A

Die-sinking EDM machine x 350 mm y 250 mm z 315 mm Distance table - quill 550 mm Chuck 3R Macro Erosion Power Module EPO Fire extinguishing system Data Dielectric 250 liters extracted Length 1.75 m Width 2.10 m Height 2.53 m

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet for bending tools, dies, upper knives, upper tools, straight tools -Tool cabinet. Drawer cabinet, sturdy design -2 drawers/3 shelves: layout/height see photos -lockable: with 1 key -Dimensions: WTH 640/930/H1215 mm -Weight: 177kg

Assortment of extra-low voltage tools, 5 pieces FEIN 1x Angle grinder MSf 742 0,6 KW, 8500 rpm Grinding wheel diameter: Ø 125 mm 1x Angle grinder MSf 78 ck 1.5 KW, 6300 rpm grinding wheel diameter: Ø 230 mm 1x die grinder AHS1 736c 0.28 KW, 4500 rpm drill chuck: max. Ø 10 mm 1x Die grinder MSh 706 0,0,1x die grinder MSh 706br /br /br /0,0,0 28 KW, 28000 rpm Collet: max. Ø 8 mm 1x Long Neck Angle Grinder MSfv 749 0.75 KW, 12000 rpm Grinding wheel diameter: Ø 125 mm 42 V 1AC 50 Hz used, Picture similar ! Dimensions ( packaging ): 650 x 400 x 400 mm

Catalog No. : 7281 Type: 2200 Producer: Emba Made in: 1974 Characteristic: In good technical condition.

Inv. Num. : 7280 Type: FORM 2-LC ZNC Producer: Charmilles Generated:- Parameters: Table dimensions: 500x400 mm Max. travel length of the X-axis: 300 mm Max. travel length of the Y-axis: 200 mm Max. travel length of the Z-axis: 200 mm Container size: 820x500 mm

Inv. Num. : 7282 Type: 1650x2800 Producer: Rowland Created: 2014 Parameters: In good technical condition.

Table size: 590 x 520 mm Max. workpiece size: 800 x 600 x 220 mm Max. workpiece weight: 500 kg X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U/V Axis Travel: 1.25" x 1.25" Filter tank capacity: 440 l. Control Mitsubishi Approx. delivery weight: 2000 kg Approx. shipping dimensions in mm: 1550 L x 1800 W x 1930 H

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 2001 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: Thermolift 100-2 - Year of construction: 2001 - Clamping force: 1,000 kN - Screw diameter: 45 mm - Injection pressure: 1,670 Bar - Shot volume: 230 cm³ - Working hours: 58,700

Key data: 500 mm, 25

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 25 mm - Injection pressure: 1,800 Bar - Shot volume: 39 cm³ - Working hours: 52,100

Key data: 500 mm, 30

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400

Buchdruck Schliesszeuge Regletten / Letter Press closing tools - rules Schliesszeuge in Breiten 9-12-18-25mm und Laengen 5-7,5-10-12-15-18-20-25-30 Keilmutter Keilback Schraube Regletten, Blei Schluessel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

X, Y, Z Travel :600x400x400 mm Machine dimentions WxDxH : 1600x2700x2858 mm Machine weight :440 kg Workpiece dimentions WxDxH :1000x700x400 mm Max. electrode weight :100kg Max. Workpiece weight 1000 kg