plastic injection moulding used for sale

Transport belt, s/s frame, plastic belt, belt width: 350 mm, total dimensions: 6000 mm x 800 mm x 2000 mm.

Plastic articulated belt conveyor, hinge conveyor, conveyor belt conveyor belt flat belt used Strip length: approx. 3400 mm Width: approx. 350 mm Stainless steel with plastic modular chain Drive with gear motor 220/380 V Total dimensions: approx. 3400 x 600 x 1800 mm Lamella chains, record tape, record tape chain; Hinge plate tape, modular chain tape, hinge plate chain The tape was used in the food industry. Changes and errors in the technical data, information and prices as well as prior sale reserved.

AEW Thurne slicer, plastic rollers, roller width: 360 mm, plastic outfeed belt, belt width: 420 mm, total dimensions: 2400 mm x 1580 mm x 2300 mm.

5 plastic belts, belt width: (5x) 155 mm.

Plastic crate with various electrical parts, dimensions: 600 mm x 400 mm x 200 mm.

12 Nölle + plastic belts, belt width: (12x) 585 mm, length: (12x) 2860 mm.

Crate with various parts, plastic plate dimensions: 330 mm x 195 mm x 10 mm, total dimensions: 600 mm x 400 mm x 200 mm.

Plastic crate with various parts, dimensions: 600 mm x 400 mm x 200 mm.

4 plastic belts, belt width: (4x) 500 mm.

3 Linde plastic hoses with coupling, box dimensions: 1100 mm x 300 mm x 300 mm.

4 Plastic mesh belts, belt width: (4x) 165 mm, belt length: (4x) 8000 mm.

Tray handler, plastic belt, belt width: (1x) 250 mm, (1x) 120 mm, (1x) 105 mm, (5x) 110 mm, total dimensions: 1700 mm x 1100 mm x 2200 mm.

2 transport belts, s/s frame, plastic belt, belt width: 505 mm, total dimensions: 4010 mm x 800 mm x 1820 mm and 4010 mm x 1300 mm x 1200 mm. Incomplete.

Recycling of PET bottles and PET films: Film washing and drying system for processing small-cut polyester films. • Capacity 700 - 800 kg/h polyester • Little used, almost as good as new. • The machine is still in operation. • Incl. big bag bagging station. A shredder must be procured separately. This means that an almost fully equipped production plant can be purchased. Also Folien + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Geppert Band AM-F 7,30m x 0,30m with drive The plastic modular belt AM-F is characterized by its slim design. Thus, the width of the frame is only 14mm more than the chain. At the linkage it is also only 40mm more. The frame including the chain is 95mm high. The modular plastic chains of the AM-F are easy to clean, particularly hard-wearing and easy to maintain by replacing individual links. Specifications: Year of construction: 2012 Length: 7,30m Width: 0,30m Height: 1,00m Drive: 220/240V 1pH Complete plant closure, wide range of mezzanine floors, pallet racks, shelving racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines More items - new and used - can be found in our shop! International shipping costs on request!

Tying of cartons with maximum width 900mm and height 800mm

Machines for the production of gloves I will sell a complete technological line for the production of foil gloves, 2x sealing line, 2x entertainment, 2x press for perforating the hole and a tape packing machine.

P332 - used approx. 81.6 m³ / 81,600 ltr PE100 tank, plastic tank, flat bottom tank, single-walled. technical details: capacity: approx. 81.6 m³ / 81,600 litres material: PE100 tank, plastic tank manufacturer: Weber Kunststofftechnik year of construction: 2016 dimensions: approx. Ø 4.00 m × approx. H 7.00 m specific weight: at least 1.0 kg/ltr Used PE100 tank, professionally cleaned and in great condition, almost as new, some are completely unused. Single-walled, above-ground storage tank, standing on flat floor. Lid on top of the roof and on the tank wall, several inlets and outlets, impervious to light. Former water tank, suitable for many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been ...

Butt welding machine PROSVAR S 315 PLUS with hydraulic drive. Serves for reliable connection of pipes made of polyethylene, polypropylene, PVDF and other polymer materials with a diameter of 40 to 315 mm

Package strapping machine with frame size 1600 x 400 mm, width 12 mm. Very little used, because bad buy. Location Netherlands, Sold on order.

approx. 28m plastic roller conveyors, undriven, approx. 60cm wide - used - : Price ex location: 1.650.-€ (net), dismantled, packed and loaded! Manufacturer: unknown Type: unknown Year of construction: unknown Element width: approx. 63cm Roll diameter: approx. 4.5cm Decency between rollers: about 1cm Element length: mainly 2,90m Other lengths: approx. 1.90m / 1.70m / 1.30m Condition: good Available: immediately Location: Frankenberg warehouse / Saxony

2006 Hemingstone glue patch bag machine model hm 800 gpc bag size width 200-650mm length 200-750mm bottom gusseting 30-65 mm production speed cycles min 100-150 film width patch film 140mm

We offer: used collision protection sticks, approx. 600 mm 35 piece(s) in stock 21698 Harsefeld. Per piece € 21.00 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

Plastic duct black 100100 make Panduit 112 m packed at 8 m each ( 42 m ) incl. lid Shipping by forwarding agent possible, separate invoice Bought as seen Payment in advance when ready for dispatch

Various plastic boxes with various dimensions, used Unit price € 3,36 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

Submersible pump, chemical pump, water pump, centrifugal pump STÜBBE Type: ETL 50-160 Immersion depth: 570 mm Pump base: Ø 350 mm Dimensions: 1100 x 550 x 550 mm Material: PP - FPM

Plastic handle MARECHAL 513P0D30473 AB17-03009 DSN 60, DS 30, DR 50, DSN 37c Material: Polyester Color: Blue New ! Dimensions( plastic handle ): 115 x 78 x 104 mm Dimensions( packaging ): 115 x 100 x 100 mm

Plastic handle MARECHAL 513P0D30 AB17-04873 DSN 60, DS 30, DR 50, DSN 37c Material: Polyester Color: Blue New ! Dimensions( plastic handle ): 78 x 78 x 104 mm Dimensions( packaging ): 115 x 100 x 100 mm

Plastic hose, plastic hose assortment PAGUS 1x SANG-A 6X4MM 1118R inner diameter: Ø 4 mm, outer diameter: Ø 6 mm < br /> Length: approx. 30 m Material: polyurethane, Colour: blue 1x SMC TU0604BU-100 Inner diameter: Ø 4 mm, Outer diameter: Ø 6 mm length: approx. 100 m Material: polyurethane, colour: blue, transparent 2x SMC TUH0604BU-20 Inner diameter: Ø : 4 mm, outer diameter: Ø 6 mm length: approx. 20 m Material: polyurethane, colour: blue, transparent 1x RIEGLER PE4/2 Inner diameter: Ø 2 mm, outer diameter: Ø 4 mm length: approx. 25 m Material: polyethylene, Colour: blue New ! Dimensions ( packaging ): 400 x 400 x 250 mm

Centrifugal fan, centrifugal fan, centrifugal fan AEG Fan wheel: approx. Ø 480 mm speed: 1000 rpm gear ratio ( belt drive ): 0,0,0,br 71 engine : AM 100 LW 4 3,0 kW 1420 rpm 220 / 380 V 3AC 50 Hz IP44 Intake opening: Ø 380 mm output: 300 x 400 mm material (housing, impeller): plastic used, tested ! Dimensions: 1020 x 890 x 1050 mm

Polyamide plastic hose, polyamide hose FESTO PAN-8x1,25 diameter ( outside ): Ø 8 mm diameter ( inside ): Ø 5.9 mm wall thickness: 1.25 mm Total length: approx. 30 m in single pieces Material: Polyamide ( TPE-A ) similar to PAN-8X1,25-NT ( 546286 ) Other quantities on request ! New ! Dimensions ( packaging ): 400 x 400 x 80 mm

Polyamide plastic hose, polyamide hose, 14 rolls FESTO PA10.12PHL Diameter (outside): Ø 15 mm diameter (inside): Ø 12 mm wall thickness:: 1.5 mm Roll length: 50 m ISO 7628 New, 14 rolls! Smaller quantities are also possible. Dimensions(one roll): 650 x 650 x 100 mm Dimensions: 1200 x 800 x 720 mm

Submersible pump, chemical pump, water pump, centrifugal pump DIETZ-MOTOREN KG Type: FDR 90 L/4P Immersion depth: 520 mm Pump base: Ø 240 mm Engine: 1,1,5 kW 220 / 380 V 1430 rpm Dimensions: 840 x 290 x 330 mm

submersible pump, chemical pump, water pump, centrifugal pump DIETZ type: FDR 90 L/4P immersion depth: 480 mm pump base: Ø 245 mm flange: Ø 480 mm motor: 1,, 5 kW 220 / 380 V 1430 rpm plastic housing Dimensions: 780 x 310 x 300 mm

Barrier set PAGUS 4 x hinged post with base, filled height erected: 870 mm foot: 280 x 280 mm 4 Chain eyelets per post 5 x 10 m Plastic chain diameter: 6 mm color change every 560 mm 10 x connecting eyelet diameter: 6 mm New ! Dimensions (packed): 500 x 330 x 1000 mm

Plastic shredder , shredder CMB ML 16 STD inlet: 220 x 220 mm motor: 2.2 kW 380 V mobile ! used, checked ! Dimensions: 550 x 700 x 1600 mm No spare blades in stock

Plastic tank PAGUS Ø 480 x 830 mm capacity: 150 litres Connection 1: Ø 64 / 57 x 300 mm Connection 2: Ø 41 / 31 x 50 mm Openings in the lid: 1x Ø 112 mm, 1x Ø 32 mm, 2x Ø 20 mm mounting plate for pump: 150 x 150 mm hole spacing: 120 mm, 4x bore: Ø 7 mm Material: plastic material thickness: 8 / 10 mm used , tested ! Dimensions: 560 x 500 x 885 mm

Kersting plastic chain conveyor belt conveyor conveyor Inclined conveyor washing GF 3350-720-620 RA1974 Technical data: Conveying length (NL): 3350 mm Framework width (NB): 720 mm belt width (GuB): 620 mm Height/band run (BH): from 920 mm to 1250 mm rising +/- 50 mm height adjustment Conveying speed (v m/s): pleas contact us with you needed Speed Drive: DEW- Gearmotor Electrical data: 400 V / 50 Hz / 0,37 kW Belt: plastic chain with toothwheel drive Year of construction: 2013 Special feature / accessories: Drip tray to catch the washing water All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2013 condition: good (used) Conveying length in mm: 3350 Nominal / outside width in mm: 720 Belt width in mm: 620 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: including supports and side guides For indivi ...

Stainless steel plastic work table PAGUS Table surface: 1270 x 590 mm with perforated grid ! stainless steel frame ! shelf changeable cable duct at the back Dimensions: 1300 x 700 x 790 mm

Plastic diaphragm valve, pneumatically actuated, closed at rest GEMÜ Type 690 15D 7715E11/N 88250713-00 DN15 PN10 Installation dimension: 110 mm Control pressure: 5,110 mmbr /br /Control pressure: 5,5 - 7.0 bar valve body material: PP diaphragm material: PTFE New ! Dimensions ( valve ): 130 x 130 x 180 mm Dimensions ( packaging ): 220 x 175 x 130 mm

Plastic actuator, valve actuator GEMÜ Type 687 9687 25z 11/N 88027303 Control pressure: 5.5 - 7.0 bar Flange for diaphragm valve: 80 x 75 mm New Dimensions ( plastic drive ): 125 x 125 x 150 mm Dimensions ( packaging ): 225 x 175 x 135 mm

Plastic actuator, valve actuator GEMÜ Typ 687 9687 40z -1 Control pressure: 3.0 - 6.0 bar Flange for diaphragm valve: 110 x 100 mm used, tested ! Dimensions ( plastic drive ): 160 x 160 x 185 mm

Plastic diaphragm valve, hand-operated GEMÜ Typ 677 15D 7715EO Z 880272107-00 DNDN 20 PN10 Installation dimensions: 110 mm material valve body: Polypropylene ( PP ) material diaphragm: PTFE new, with documents !; dimensions ( valve ): 145 x 90 x 125 mm Dimensions ( packaging ): 175 x 175 x 120 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 630 25D 78711412/N 88242046-00 DN25 PN10 Installation dimensions: 120 mm Control pressure: 5,0 - 6.0 bar Valve body material: PP diaphragm material: EPDM Base plate: 132 x 71 x 15 mm hole spacing: 110 mm 2x bore: Ø 9.5 mm New ! Dimensions: 145 x 132 x 210 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 630 32D 78711413/N 88278021-00 DN32 PN10 Installation dimension: 135 mm Control pressure: 5,5,0 - 6.0 bar Valve body material: PP diaphragm material: EPDM Base plate: 150 x 85 x 10 mm hole spacing: 125 mm 2x bore: Ø 9.5 mm New ! Dimensions: 165 x 150 x 280 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 610 15D 7851411/N 88037717 DN15 PN6 Installation dimensions: 90 mm Control pressure: 5,0 - 7.0 bar Valve body material: PP diaphragm material: EPDM New Dimensions: 100 x 90 x 115 mm

Diaphragm valve, manually operated GEMÜ Type: 677 25D 871140 88072094 DN25 DA32 PN10 Installation dimensions: 90 mm Material valve body: Polypropylene ( PP ) Material diaphragm: EPDM Base plate: 132 x 71 x 15 mm hole spacing: 110 mm 2x bore: Ø 8.5 mm New ! Dimensions: 132 x 118 x 140 mm

Plastic diaphragm valve, pneumatically actuated VENTIL- und MSR-TECHNIK Product no.: 401942 + 402435 + 400835 DN50 PN10 Installation dimensions: 185 mm Position sensor: GEMÜ 1231 Valve body material: PP Diaphragm material: FPM 4x threaded bore: M8 x 1.25 hole spacing: 45 mm New ! Dimensions: 245 x 145 x 390 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 690 25D 7711411/N 88072419 4758987 DN25 DA32 PN10 Installation dimensions: 117 mm Control pressure: 5,5 - 7.0 bar valve body material: PP diaphragm material: EPDM mint ! Dimensions: 146 x 128 x 262 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 690 32D 7711412/N 88052558 4758988 DN32 DA40 PN10 Installation dimension: 135 mm Control pressure: 5,5 - 7.0 bar Valve body material: PP diaphragm material: EPDM mint ! Dimensions: 175 x 160 x 330 mm