plastic injection moulding used for sale

Granulator SHINI SG-1635 Production - Taiwan. Issue 2008. In working order. New set of knives Power - 2200W Frequency -50 hz source 3, 400V

Pallmann crusher Is in working order. Characteristics are not known.

Capacity 1.5 - 2 t / h Full color RGB CCD cameras Self-learning function automatic re-sorting Slides: 6 (1-2 slides can be used for re-sorting) contactless ejectors The display languages for controlling the system are Russian and English Dedusting system LED lighting complete facility

Drosbach 165/58 corrugator cutter manson mold and 2 pcs head Max diameter: 165mm

Refrigerator Eurochiller, model GCA045 Production - Italy. Issue 2008. Working. Volt 400 HZ 50 kw 18.5 A 34 Vaux 24 VI 500 IP 54 Gas R407c Air Condenser 25C Water Process 15C PS Alta/bassa, Hogh/Low Gas 27/22 bar TS Lato alta, High Side -10C/+95C TS lato Bassa, low Side -10C/+55C

Group of 4 mixing silos DEGA Model MVP5000, with internal mixing system, loading and unloading, capacity 5000 lt. (the cost refers to a single silo)

JON WAI 230HPI23H injection molding machine Production - Taiwan. Issue 11.2007. Worker. Locking force 230 tons, Heater - 12,1 Kw horse power 60 HP

JON WAI 250 SD injection molding machine Production - Taiwan. Issue 2008. In working order. Locking force 250 tons Heater - 1802 KW Horse power - 40 HP The injection volume is 820 grams for polystyrene. Large diameter auger - 65mm.

Refrigerator Shiny Is in working order. Power 50 kW. 2008 2ca07120007

Plastic mill Manufacturer Meltic Model 280 Year 1998

Machine for sealing bags with a bottom weld and perforation. It produces pouches on a roll, of a specific length and quantity. Used by us for the production of grocery bags or garbage bags. The machine is powered by 380V.

Production - Italy, release of 2013. It is in working condition. Nominal power - 22 kW phase - 3 a.c. 50Hz Weight - 990 kg Gives out cold - 70-80 kW.

Press mould Box 600400140, 30% wear, perforation is filled with material on one side

Press mould Box 400300280 Finpack. Wear 10%, 2 piercings broken

Press mould Box (China) 600400260/220 with Drawer Spare Parts 600400160

Press mould Grating for slatted floors, Wear 10-15% broken two ejectors, can work in automatic mode when troubleshooting

Granplast shredder year 1996 cv. 5.5 soundproof mouth diameter 290 x 320 number of blades 3

Dryer Wittmann Silmax E600 dryer Year of production 2012

Injection molding machine Cosmos WG-800C Production - China. Issue 2005. It is in working condition. Voltage - 380W, frequency - 50hz screw diameter 100 mm, injection volume 3600 cm. cube

Piovan air dehumidifier Mod. DS 415, capacity 400 kg, (Motan hopper excluded).

Smooth conveyor belt

Kurtz LS101 strip gluer A three-station gluer that allows you to glue three sides of the strip in one pass. Very good technical condition.

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

The Breaker device is used to form a foil on a roll, it enables the insertion of an opening-closing tape. The machine is powered by 380V.

Piovan MDW70 gravimetric dispenser, year of production 2007, new never used

Silos miscelatore lt. 12000,00 Located in Italy Year 2005

Packer with plastic feeder and shrinking tunnel Maximum product dimensions 250 x 300mm

Working industrial used Visible by appointment Material preheater Arburg brand

Capper AROL – pre-threated plastic cork PCO 1881 4 capping heads Suitable for plastic corks PCO 1881 – 28 mm Speed: 8.000 BHP Counterclockwise direction Year 2000 Machine without electrical panel because it worked in sync with the filler

Cutting Mill Fabr. TRIA Type 32/20 JMYear 2005Technical specifications:Milling chamber opening: 320 x 200 mmNumber of stator / rotor blades: 3/2Rotor diameter: 180 mmStandard sieve: 5.0 mmProduction capacity approx: 40 60 kg / hPower 400V: 3.0 kWRotor speed approx: 280 1 / min:Weight: 320 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cutting Mill Fabr. TRIA Type 32/20 JMMachine -No: 83304602M Year 2005Technical specifications:Milling chamber opening: 320 x 200 mmNumber of stator / rotor blades: 3/2Rotor diameter: 180 mmStandard sieve: 5.0 mmProduction capacity approx: 40 60 kg / hPower 400V: 3.0 kWRotor speed approx: 280 1 / minWeight approx: 320 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Small cutting mill make DREHER type S 15/20 LFabr. -No: K11776 built in 2004Rotor diameter 150 mmWorking width 200 mmRotor cutting bars 3Statorschneidleisten 2Insertion opening H x W 300 x 200 mmPower at 10 mm sieve 50 kg / h.Motor power 2.2 kWWeight approx. 230 kgWith- CE marking- electrical safety interlockused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Plastic single injection splicing machine make unknownwith hydraulic ORSTAusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Line for the assembly of lip gloss / mascaras We offer a practically new (production year: 2018) line for the assembly of lip gloss or mascaras, the manufacturer of which is the Italian company SYCMA. The line consists of the following machines: 1. Machine for mounting the cap (capacity: 2 500 pcs / h) 2. Machine for sealing a bottle with a collar (2 devices; capacity of one: 1,350 pcs / h) 3. Machine for assembling the scraper (capacity 2 160 pcs / h) The line has so far produced only approx. 380,000 pcs.

S/s roller conveyor, plastic rollers, roller width: 450 mm, total dimensions: 3100 mm x 660 mm x 900 mm. Lot located on another location in Deventer (NL), viewing and pick-up in consultation with Industrial Auctions BV.

S/s double roller conveyor, plastic rollers, roller width: 450 mm, total dimensions: 4500 mm x 950 mm x 1200 mm. Some rollers missing. Lot located on another location in Deventer (NL), viewing and pick-up in consultation with Industrial Auctions BV.

Espera labelling machine, plastic belts, belt width: (2x) 145 mm, total dimensions: 950 mm x 750 mm x 1850 mm. Lot located on another location in Deventer (NL), viewing and pick-up in consultation with Industrial Auctions BV.

90° curve conveyor, s/s frame, plastic mesh belt, belt width: 250 mm, total dimensions: 2500 mm x 2300 mm x 530 mm.

Excluding Boxes

liquid tank, without drain, with lid, with drip tray

Linkx Systems Ltd tray loading machine, plastic belt, belt width: 90 mm, clearance: 490 mm x 170 mm, total dimensions: 2300 mm x 1780 mm x 1960 mm.

B.Eysink B.V. elevating belt, plastic belt, belt width: 250 mm, elevating height: 2250 mm, total dimensions: 2800 mm x 650 mm x 2550 mm. Lot located on another location in Deventer (NL), viewing and pick-up in consultation with Industrial Auctions BV.

Metal detector with rejector, s/s frame, plastic belt, belt width: 310 mm, clearance: 350 mm x 110 mm, total dimensions: 1800 mm x 1000 mm x 1360 mm. Lot located on another location in Deventer (NL), viewing and pick-up in consultation with Industrial Auctions BV.

Transport belt, s/s frame, plastic belt, belt width: 400 mm, total dimensions: 4800 mm x 500 mm x 820 mm.

Hot runner control unit - Feller Engineering MCS (2 pcs.) Year of construction: Description: 24 hot zones with cabling Price: On request

Transport belt, s/s frame, plastic belt, belt width: 300 mm, total dimensions: 6000 mm x 700 mm x 950 mm.

Transport belt, s/s frame, plastic belt, belt width: 190 mm, total dimensions: 1470 mm x 340 mm x 680 mm.

Elevating belt, s/s frame, plastic belt with dividers, belt width: 370 mm, divider height: 20 mm, distance between dividers: 210 mm, elevating height: 1100 mm, total dimensions: 2100 mm x 700 mm x 1400 mm.