maho mh used for sale

turning length: 1000 mm turning diameter over bed: 640 mm turning diameter over slide rest: 390 mm spindle turning speed range: 4.5 - 1800 U/min spindle bore: 68,0 mm morse taper: 5 MK quill stroke: 220 mm bed width: 405 mm spindle taper: DIN 55022 Gr. 6 total power requirement: 11 - 18 kW weight of the machine ca.: 2500 kg. dimensions of the machine ca.: 2950 x 1200 x 1500 mm from a maintenance workshop - good condition () Machine was checked annually Furnishing: - heavy - robust lead/pull spindle machine - WERNER GARANT face plate Ø 500 mm - HEIDENHAIN digital display - type ND 730 - MULTIFIX steel holder, with 3x inserts - FINN SAFETY lining protection - type SPS 600 - movable tailstock - Machine light - 1x food key - Chip back wall - movable bed stop - 2x EMERGENCY STOP switches - Coolant system, with collecting tray Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenbl ...

bore capacity in steel (diameter): 32,0 mm bore capacity in cast iron: 36,0 mm throat: 280 mm bore stroke: 150 mm turning speeds: 120 - 1600 U/min table-size: 400 x 550 mm morse taper: MK 3 feed: 0,1-0,2-0,3 mm/U total power requirement: 1,5 kW weight of the machine ca.: 350 kg range L-W-H: 800 x 600 x 1900 mm Furnishing : - Column drilling machine - Drive: V-belt - continuous speed adjustment via VARIO drive” - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Work table with T-slots - Height adjustable via hand crank - adjustable drilling depth stop with mm scale - Coolant device with container - Connection cable + 16A plug Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9103740 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Structure-borne Noise Sensor, Acoustic Sensor QUASS Type: Acoustic Emission Article: QWT-MICRO Frequency: max. 100 MHz New ! Dimensions (sensor): 31 x 23 x 18 mm Dimensions (packaging): 140 x 80 x 20 mm

MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 3.0 m -Weight: 3.1 kg

Measurement data acquisition device, test device, telemetry system -Telemetry Division: Microdac B1A -Frequency: 10.7 MHz -Price: per piece -Number: 2 pieces -Dimensions: 220/105/H85 mm -Weight: 1.0 kg/piece

saw blade diameter: 450 mm cutting diameter: 150 mm capacity 90 degrees: flat: 400 x 30 mm capacity 90 degrees: flat: 345 x 70 mm capacity 90 degrees: square: 140 x 140 mm capacity 45 degrees: flat: 280 x 30 mm capacity 45 degrees: flat: 240 x 70 mm stroke: 240 mm saw blade turning speeds: 6 / 12 / 24 / 48 n/min work height max.: 1000 mm engine output: 3,0 / 3,6 kW weight of the machine ca.: 1150 kg range L-W-H: 1000 x 1330 x 1860 mm Furnishing: - electro-hydraulic semi-automatic cold circular saw - EISELE front control panel - robust and stable machine base - continuously adjustable feed speed of the saw blade - front guard / foldable - Drive via worm gear including EISELE rotation compensation” - comfortable miter adjustment in both directions via large turntable - suitable for the use of Ø 400/425/450 saw blades - hydraulic material tension - Pole changer motor for the gear stages  ...

pressure: 45,0 t chamfer lenght: 2050 mm distance between columns: 1600 mm column arm: 300 mm stroke: 150 mm dayligth: 395 mm ajustment speed: 100 mm/sec working feed: 1-10 mm/sec return speed: 70,0 mm/sec table width: 60,0 mm table height: 905 mm oil volume: 150 l operating pressure: 340 bar voltage: 400 V total power requirement: 5,5 KW weight of the machine ca.: 3500 kg range L-W-H: 2900 x 2100 x 2420 mm good / well-maintained condition () Furnishing: - DELEM CNC control model DA 65 Swivel control panel, front right 2D graphical programming & product display Tool & program library including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upp ...

pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 255 mm stroke: 215 mm dayligth: 410 mm table height: 890 mm ajustment speed: 100 mm/sec working feed: 6,5 mm/sec back stop - adjustable: max. 500 mm oil volume: 160 ltr. total power requirement: 5,5 kW weight: 7200 kg range L-W-H: 3750 x 1450 x 2500 mm Furnishing: - electro-hydraulic press brake - CNC CYBELEC EURO III control unit - Control panel, right front - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9308337 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25,0 / 30,0 mm throat: 260 mm bore stroke: 120 mm spindle taper: 3 MK table:: 390 x 420 mm T-slots: 2x B 14.0 mm table height: 900 mm turning speeds: 80 - 1400 U/min column diameter: 110 mm distance spindle /table: 220 - 600 mm total power requirement: 0,7 / 1,3 kW weight: 275 kg range L-W-H: 900 x 900 x 1600 mm Machine from a maintenance workshop TABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT Furnishing: - pole-changing motor - Continuous speed adjustment including analogue speed display - Spindle feed manually via cross handle - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Front main switch - Machine base including coolant system - Operation manual Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9093640 T ...

pressure: 60.0 t chamfer lenght: 2050 mm distance between columns: 1550 mm column arm: 255 mm stroke: 165 mm dayligth: 360 mm table height: 890 mm ajustment speed: 85.0 mm/sec working feed: 6,5 mm/sec back stop - adjustable: max. 500 mm oil volume: 100 ltr. total power requirement: 4,0 kW weight: 4600 kg range L-W-H: 2700 x 1450 x 2400 mm Machine from a workshop for the disabled maintained condition () Furnishing: - CNC electro-hydraulic press brake - CNC CYBELEC EURO IV control unit high resolution screen Clear, concise menus in the operators language Tools and products library - Control panel, right front - CNC controlled axes: Y1 + Y2 + X axis - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - AMADA-SYSTEM A upper tool adapter including upper wedge crowning very many bending/insertion tools (stamps + matrices) - 2x front material/sheet metal support arms  ...

through-put width: 750 mm working heigth: 750 mm working area L-W-H: 1200 x 750 x 750 mm compressed air: 0 - 10 bar Air consumption: min. 250 l/min. work height max.: 850 mm weight of the machine ca.: 800 kg dimensions of the machine ca.: 1400 x 1200 x 1870 mm Furnishing: - Industrial sandblasting system - Working space: 1,200 x 750 x 750 mm LxWxH - Perforated metal work grid with stable support - 2x side passage openings with closure sliders Dimensions: 340 x 240 mm - 1x sectional door that opens upwards, revealing the entire blasting space - continuous jet pressure adjustment - Pressure gauge - pressure display - Front window / plexiglass - freely movable foot switch - Drain/collection container for blasting material - Blasting gun + blasting gloves Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9803037 The data for this ad was created with Mo ...

sheet width: 3100 mm plate thickness: 10.0 mm thickness at Niro-steel: 6.0 mm cutting angle: 2.0 ° down holder: 14 Stück no. of strokes: 13 - 18 Hub/min back stop - adjustable: 1000 mm Control: ELGO P40T column arm: 250 mm oil volume: 265 l engine output: 22,0 kW weight: 9600 kg range L-W-H: 4700 x 2300 x 2200 mm New price from 56.000 euros Special price on request Furnishing: - electro-hydraulic sheet metal plate shears oscillating cut - ELGO NC control - model P40T Touch, front left control panel - CNC electro-motorized back gauge, with ball screws including retraction function selectable Fold-out function for sheets longer than 1,000 mm - manual cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x support arms, with T-slot and mm scale - 1x freely movable foot switch with emergency stop button - Ball rollers in the support table - front finger protection - FIESSL ...

pressure: 165 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 450 mm stroke: 250 mm dayligth: 440 mm ajustment speed: 100 mm/sec working feed: 1-10 mm/sec return speed: 120 mm/sec table height: 950 mm oil volume: 250 l operating pressure: 265 bar voltage: 380 V total power requirement: 18.5 KW weight of the machine ca.: 12600 kg range L-W-H: 3670 x 1830 x 3130 mm Machine in good / well-maintained condition () Furnishing: - DELEM CNC control - model DA 65 Swivel control panel, front right 2D graphical programming & product display Tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled pneumatic table crowning (V axis) - GASPARINI hydraulic upper tool clamping - GASPA ...

pressure: 90,0 t chamfer lenght: 2600 mm distance between columns: 2050 mm column arm: 310 mm ajustment speed: 80,0 mm/sec working feed: 10,0 mm/sec return speed: 80,0 mm/sec back stop - adjustable: ca. 725 mm stroke: 120 mm dayligth: 475 mm table height: 860 mm oil volume: 130 ltr. total power requirement: 11,0 kW weight of the machine ca.: 5500 kg. good condition () Furnishing: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W 2D graphical programming automatic bending sequence calculation and collision detection high quality color LCD screen (TFT) - swiveling operation, front left - controlled axes: Y1 + Y2 + X + R + CNC crowning - electric back gauge, on ball screws - with 2x manually adjustable stop fingers - motorized, electric CNC crowning - Upper tool holder system A (Amada), with upper wedge crowning - Lower tool holder Sysetm A (Amada) - LAZER Safe f ...

work piece width: 1500 mm plate thickness: 0,8 - 100 mm Brush width: 490 mm Brush diameter: 200 mm immersion travel: ca. 1.5 - 2.0 mm grinding speed: 200 - 1200 U/min band speed: 0,8 - 4.0 m/min work height max.: 950 mm Required air-pressure: 5.0 bar Air consumption: 80.0 l/min. number of brushing / polishing units: 8 Stück Control: NC Touch voltage: 400 V total power requirement: ca. 40.0 kW weight of the machine ca.: 6.100 kg. dimensions of the machine ca.: 3700 x 2750 x 2080 mm Well maintained condition with lots of accessories New price including accessories approx. 180.000 euros Special price on request Furnishing : - ERNST dry wide belt sanding machine TYP ATLAS ER ROTOR” Area of application: - Slag removal / deburring / edge rounding / finish grinding etc. - ERNST NC control including touch screen Control of the entire system graphically supported color terminal Adjustme ...

bore capacity in steel (diameter): 40,0 mm bore stroke: 130 mm throat: 285 mm table:: 380 x 460 mm morse taper: 4 MK turning speeds: 80 - 1250 U/min distance spindle /table: 730 mm swival range +/-: 90.0 ° column diameter: 120 mm T-slots: 16/26x20 mm total power requirement: 1,5 kW weight of the machine ca.: 442 kg. range L-W-H: 730 x 510 x 2150 mm New price ~ 4.000 euros Special price on request Description : - 6 switchable speeds thanks to powerful motor - Direction switch for clockwise and counterclockwise .. rotation for thread cutting - Solid work table (360° rotatable), pivotable from -90° to +90° - Flexibility thanks to the table and head that can be swiveled on both sides - Machined machine base for clamping particularly high workpieces - Quality ball bearings ensure high concentricity - Adjustable drilling depth stop, drilling depth can be read using a scale - Stable and g ...

MHS Model: Ideal Circular Knife Machine Stainless steel version Bread passage approx. 350 x 1150 x 320 mm, LxHxD Bread slicer with base Knives NEW Manual operation via membrane keypad DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 770 x 700 x 510 mm, WxDxH Used machine cleaned and functionally tested with 6 months warranty Only with us you will find many more bread slicers!

pressure: 180 t chamfer lenght: 3700 mm distance between columns: 3250 mm throat: 270 mm stroke: 220 mm ajustment speed: 80,0 mm/sec working feed: 10,0 mm/sec return speed: 58,0 mm/sec dayligth: 395 mm table width: 200 mm work height max.: 870 mm oil volume: 210 ltr. total power requirement: 15,0 kW weight of the machine ca.: 12100 kg. range L-W-H: 4200 x 1470 x 2550 mm from a maintenance workshop () Furnishing: - conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam - electric back gauge, with ball screws (X axis) with 2x manually adjustable stop fingers Fine adjustment via handwheel at the front, with analogue position display - electro-motor adjustment of the immersion depth (Y1+Y2 axis) with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools / additional divided tools - 1x rotating Multi V u ...

bore capacity in steel (diameter): 18,0 mm bore capacity in cast iron: 23,0 mm throat: 2250 mm bore stroke: 100 mm turning speeds: 240 - 3800 U/min table-size: 295 x 350 mm morse taper: MK 2 total power requirement: 0,65 / 1,2 kW weight of the machine ca.: 250 kg range L-W-H: 500 x 400 x 1830 mm Machine from a vocational school () Furnishing : - Column drilling machine - Drive: V-belt - manual spindle feed - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Keyless drill chuck including taper mandrel - Machine base - Connection cable + 16A plug Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9093641 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 20,0 mm bore capacity in cast iron: 25,0 mm throat: 210 mm bore stroke: 100 mm turning speeds: 240 - 3800 U/min table-size: 300 x 425 mm morse taper: MK 3 total power requirement: 0,6 / 1,2 kW weight of the machine ca.: 300 kg range L-W-H: 500 x 700 x 1750 mm Machine from a vocational school () Furnishing : - Column drilling machine - Drive: V-belt - manual spindle feed - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - adjustable drilling depth stop - Keyless drill chuck including taper mandrel - Connection cable + 16A plug Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9103742 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 12,0 mm ST plate thickness: 8,0 mm VA no. of strokes: 7 - 14 Hub/min down holder: 18 Stück cutting angle: 0,5 - 3,0 ° work height max.: 930 mm back stop - adjustable: 1000 mm Number of working hours: 18.822 h total power requirement: 22,5 kW weight: 8.500 kg range L-W-H: 4180 x 2030 x 2210 mm Furnishing: - Robust hydraulic, link-guided guillotine shears - Electro-motor backgauge with analogue display Fine adjustment via hand wheel, front left - Control panel, front left - manual cutting gap adjustment, from behind - electro-hydraulic cutting angle adjustment - Front finger protection - Stable front support table - 1x side stop with T-slot and millimeter scale - 3x support arms - 1x free moving footswitch - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325234 The data for this ad was c ...

sheet width: 1250 mm plate thickness: 16.0 mm thickness at Niro-steel: 10,0 mm blade length: 1300 mm cutting angle: 2-3 Grad no. of strokes: 13 Hub/min back stop - adjustable: 500 mm Control: konv. table height: 810 mm blade length: 1300 mm oil volume: 350 l engine output: 18.5 kW weight: 3900 kg range L-W-H: 2150 x 1200 x 1900 mm Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge .. protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways .. Spring batteries on the side stands - manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale - hydraulic cutting angle adjust ...

pressure: 150 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 405 mm table width: 150 mm ajustment speed: 200 mm/sec working feed: 10.0 mm/sec return speed: 120 mm/sec stroke: 215 mm dayligth: 465 mm table height: 960 mm operating pressure: 320 bar oil volume: 200 l voltage: 3x 400 V total power requirement: 15.0 KW weight of the machine ca.: 9500 kg range L-W-H: 3958 x 2350 x 2750 mm maintained condition () Furnishing: - BEYELER electro-hydraulic CNC press brake - CNC control CYBELEC model DNC 800 HP numerical CNC control unit 2D graphical programming & product display Color screen Tool & program library clear and logically structured screen pages Collision display Swivel operation, front right - CNC controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-contro ...

punching pressure: 45.0 t punch diameter: 22 in 15.0 mm punch diameter: 38 in 8.0 mm round bar steel: 30.0 mm square edge steel: 25.0 L-beam: 100 x 10.0 mm shear: flat material: 300 x 12.0 mm adjustment of stroke: 0 - 55 mm work height max.: 940 / 1140 mm strokes per minute: 34 punch diameter: max. 110 mm voltage: 400 V total power requirement: 4.5 kW weight: 1245 kg dimensions: 1520 x 590 x 1700 mm from a maintenance workshop New price ~ 13.000 euros Special price on request Furnishing: - electro-hydraulic profile steel shear - Punching station, flat steel shears, angle/profile steel shears, .. notching station - continuous adjustment of the stroke path - very compact design - Support table at notching and punching station - side support tables - 1x manually adjustable contact length stop - 1x freely movable foot switch - Central lubrication Machine link: http://mhp.logotech.de/hpm/ ...

sheet width: 3200 mm plate thickness: 4,0 mm distance between columns: 3300 mm daylight opening: OW 400 mm adjustment: UW 80 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN air pressure - required: 4.5 - 6.0 bar total power requirement: 9,8 kW oil volume: 160 l weight: 8500 kg range L-W-H: 4550 x 2530 x 2275 mm well-maintained machine with lots of special accessories () last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 Swivel control panel, front right - CNC controlled / electro-motorized back gauge pneumatic / lowerable material stop fingers Adjustment speed max. 250 mm/sec. Drive power 0.5 kw Sheet metal support table at the back - motorized lower beam adjustment (S axis) Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam Adjustment range max. 400 mm Lifting ...

dimensions of saw-blade: 250-300 x 40.0 mm cutting range: 95.0 mm capacity 90 degrees: square: 90 x 90 mm capacity 90 degrees: flat: 125 x 90 mm capacity 45 degrees: round: 95.0 mm capacity 45 degrees: square: 85 x 85 mm capacity 45 degrees: flat: 95 x 85 mm capacity 60 degrees: round: 70.0 mm capacity 60 degrees: square: 60 x 60 mm capacity 60 degrees: flat: 75 x 60 mm work height max.: 900 mm saw blade turning speeds: 40 / 80 U/min voltage: 400 V total power requirement: 1.6 / 2.1 kW weight: 230 kg range L-W-H: 620 x 850 x 1600 mm including 2x heavy / robust roller conveyors () Furnishing : - vertically guided cold circular saw - manual quick-clamping device - manual, stepless saw blade feed - simple & comfortable miter adjustment Setting: 45-90-45-30° - generously sized gearboxes - 2x cutting speeds - Rotation compensation for long saw blade service life - Convenient saw blade chan ...

pressure: 30.0 t punching cross-cut in cmm: 30 in 9.0 mm stroke: 0 - 28.0 mm column arm: 610 mm work height max.: 1010 mm no. of strokes: ca. 35 Hub/min oil volume: 35.0 l punching cross-cut in cmm: 270 mm² total power requirement: 4.0 kW weight of the machine ca.: 1200 kg. range L-W-H: 1400 x 700 x 1600 mm good condition () with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel Machine link: https://mhp.logotech.de ...

Control:Renishaw UCC 5.5 Accuracy of the measurement (4,5 + L/200) ?m Manual Probe Heads Renishaw MH20i Axis travel range: X 700 mm Y 700 mm Z 500 mm reference sphere included Erowa clamping system is available Made in Italy

cutting diameter: 250 mm capacity 90 degrees: flat: 250 x 450 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: square: 250 x 190 mm table height: ca. 650 mm saw band length: 3300 mm dimensions of saw-band: 3300 x 27 x 0,9 mm cutting speed: 21 - 62 m/min total power requirement: 1,5 kW weight of the machine ca.: 320 kg dimensions of the machine ca.: 1739 x 571 x 1130 mm very rarely used () Furnishing: - electro-hydraulic horizontal band saw - precise saw blade guidance - continuously adjustable belt speed - Continuously adjustable feed from the saw frame - heavy cast construction - manual quick material clamping - Setting options for miter cuts - Replacement saw blades - Coolant device Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9173350 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MHS Bread Slicer Type: IDEAL L  Year of construction: 2019 Circular Knife / Circular Knife Machine Tabletop with base frame Stainless steel Adjustable cutting width Height: 118cm Width: 90cm Depth: 70cm

pressure: 50.0 t chamfer lenght: 1275 mm distance between columns: 1040 mm column arm: 410 mm table width: 100 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec stroke: 215 mm tiltable up to: +/- 10 mm table height: 1050 mm dayligth: 385 mm oil volume: 80.0 L travel -x axis: 500 X-Weg mm traversing speed: 300 R-Weg mm compressed air: 6.0 bar Number of working hours: 24.000 h control: DELEM total power requirement: 8.0 KVA weight of the machine ca.: 4750 kg. range L-W-H: 2000 x 2000 x 2380 mm Machine with only approx. 24.000 operating hours () all axes controlled: Y1 + Y2 / X / R / Z1 + Z2 / I axis Furnishing: - DELEM CNC control model DA 65 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled hei ...

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm cutting angle: 2,0 ° no. of strokes: 15 Hub/min back stop - adjustable: max. 1000 mm down holder: 14 Stück work height max.: 865 mm Column width: 3515 mm throat: 50.0 mm Control: D-Touch 7 oil volume: 200 l engine output: 15.0 kW voltage: 400 V weight: 7.650 kg range L-W-H: 4110 x 2200 x 2100 mm from a maintenance workshop (vehicle construction) maintained condition () New price ~ 41.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control (touchscreen) Anti-reflective, robust 7 color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back ...

x-travel: 6.000 mm y-travel: 520 mm spindle diameter: ISO 40 MAS 403 BT bore capacity in steel (diameter): 32.0 mm thread cutting attachment: 20 M turning speeds: 50 - 3.000 U/min table:: 6.000 x 520 mm table height: 920 mm Control: OMRON CNC total power requirement: 8.9 kW weight of the machine ca.: 5250 kg. dimensions of the machine ca.: 7500 x 2200 x 2200 mm Furnishing : - Welded monoblock steel frame with high rigidity - Modular table made of cast iron with four T18 grooves - 8.4 color touchscreen CNC control - The machine moves via linear guides along all axes - is driven by servo motors (programmable). - Spindle rotation driven by servo motor (programmable) - Spindle BT40 with automatic clamping - External coolant system: pump and tank - automatic tool calibrator CNC OMRON color touch screen control: - Memory up to 999 programs - Programming of coordinates via 3 different menus: S ...

sheet width: 1050 mm plate thickness: 1.50 mm pre-bending: 1.25 mm diameter of upper rolls: 65.0 mm diameter of lower rolls: 65.0 mm side roll diameter: 65.0 mm speed: ca. 6,0 m/min voltage: 400 V total power requirement: 0.8 kW weight of the machine ca.: 455 kg range L-W-H: 1500 x 700 x 1230 mm Furnishing: - electro-mechanical three-roll round bending machine - robust electric drive STROMAG BZFM 63 drive motor - asymmetrical roller arrangement - manual delivery of the side roller - manual delivery of the bottom roller - swing-out top roller - freely movable double foot switch Right/left rotation of the rollers - side control cabinet Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9401269 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3100 mm down holder: 16 Stück no. of strokes: 20 Hub/min oil volume: 160 ltr. cutting angle: 1.6 ° Control: DAC 310 total power requirement: 11.0 kW weight: 5450 kg range L-W-H: 3800 x 1940 x 1560 mm Furnishing: - electro-hydraulic swing cutting shears including sheet metal holding device - DELEM CNC control unit, model DAC 310” Travel distance back gauge X = 750 mm Backlash-free ball screw for back gauge Speed 100 mm/sec - electrical cutting length limitation Cutting length limitation to increase the number of strokes/min. - electro-motoric cutting gap adjustment - Tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/intervention protection - 1x side stop with T-slot & millimeter scale - 3x front support arms - ...

total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 6-axis industrial robot YASKAWA MH50 2 CNC rotary tables 1. rotary table 1 and rotary table 2 limited Nmax=1.300 1/min Reduction ratio I= 1:72 Nmax: Reduction ratio and Nmax motor corresponds to 120°/sec on the table Mdnenn. Output = 828 Nm Maximum centric loading weight = 15 kN Centering force from inside to outside clamping = 7,540 N @ 6 bar Centering accuracy in the gripper = 0.05 mm [PA] Rotary field restriction depending on cable and hose situation Provided for ± 720° (provide for this in the robot controller) Motor: YASKAWA SGMRV-20ANA-YR11 Milling spindle: AMTRU (CH), type Flexicut 250 Gearbox: ZAE Hamburg, type: S100B-1300/65-HOX-72.0:1-3000 Version: with Yaskawa servo axis + ZAE worm servo gearbox The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Circular Knife Machine Stainless steel mobile Disc thickness: 4 - 18 mm Bread halving Bread size max: 400 x 320 mm Dimensions: 1000 x 700 x 1100 mm WxDxH Connection: 380 V, 1 kW, 16A-CEE plug Used machine cleaned

sheet width: 3050 mm plate thickness: 6.0 mm cutting angle: 0.5 - 3.0 ° down holder: 18 Stück no. of strokes: 9 / 14 Hub/min back stop - adjustable: 750 mm Control: SC7p engine output: 10.0 kW weight: 4800 kg range L-W-H: 3750 x 1600 x 2450 mm from a maintenance workshop well maintained condition - checked annually () Furnishing: - electro-hydraulic sheet metal shears - backdrop-guided - ATLANTIC NC control unit - model SC7p Target / actual information about the motorized back gauge Manual positioning possible via handwheel Digital display for backgauge position electro-hydraulic cutting angle adjustment Adjustable retraction from the back gauge before the start of the cut Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot switch - Fi ...

sheet width: 2040 mm plate thickness: 2.5 mm pre-bending: 2.0 mm diameter of upper rolls: 110 mm side roll diameter: 110 mm diameter of lower rolls: 110 mm speed: 6.0 m/min voltage: 400 V total power requirement: 1.5 kW weight of the machine ca.: 1250 kg range L-W-H: 3020 x 670 x 1010 mm Furnishing: - robust electro-mechanical three-roller drive - Driven by spur gear brake motor + countershaft - asymmetrical roller arrangement - electrical delivery of the rear roller with automatic electrical switch-off Setting min./max. travel distance possible - Rotatable control panel, front right - swing-out top roller, with folding bearing - Conical bending device - freely movable double foot switch Right/left rotation of the rollers - Manual delivery of the bottom roller using a handwheel with analogue position display - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/ ...

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Brakes: electric, can be put back into operation for an additional charge -Design: very low loading area with good stability -Platform: 2600/1600/H440 mm -Load capacity: 18 tons -Steering: double -Drawbar length: 1300 mm -Drawbar eye: Ø 50 mm -Wheels number: 8 pieces -Wheel Size: 550/160-410 STB MH20 -Quantity: 1 piece of heavy-duty transport trolley available -Price: piece -Total dimensions: 5250/1600/H550 mm -Weight: 2200kg

punching pressure: 80.0 t punch diameter: 28 x 20.0 mm punch diameter: 57 in 9.0 mm throat: 320 mm round bar steel: 45.0 mm square edge steel: 45.0 L-beam: 150 x 13.0 mm shear: flat material: 300 x 20.0 mm adjustment of stroke: 0 - 55 mm work height max.: 1130 / 890 mm strokes per minute: 34.0 punch diameter: max. 160 mm voltage: 400 V total power requirement: 7.5 kW weight: 2095 kg dimensions: 1760 x 710 x 1830 mm New price ~ 24.000 euros Special price on request Furnishing: - electro-hydraulic profile steel shears with a large radius - Punching station, flat steel shears, angle/profile steel shears, .. notching station - continuous adjustment of the stroke path - very compact design - Support table at notching and punching station - KINGSLAND electrical contact length stop - Protective devices at workstations - 2x freely movable foot switches - User manual (PDF) Machine link: http:/ ...

turning length: 1500 mm turning diameter over bed: 460 mm turning diameter over slide rest: 240 mm turning dia. in gap: 650 mm number of spindle speeds: 32 - 2000 U/min. turning speeds: 12 Stk. spindle bore: Ø 58.0 mm quill stroke: 130 mm bed width: 300 mm tailstock quill taper MT: DIN 228 / MK 4 spindle taper: DIN 55027 / D 1-6 feeds - longitudinal: 0,031 - 1.7 mm/U feeds - cross: 0,014 - 0,784 mm/U voltage: 380 V total power requirement: 5.5 kW weight of the machine ca.: 1977 kg range L-W-H: 2750 x 1080 x 1370 mm Machine from a maintenance workshop current new price ~ 17.500 euros Special price on request Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. Furnishing: - robust lead and pull spindle lathe - RÖHM 3-jaw chuck, including replacement jaws & chuck key - foldable lathe chuck protection - MULTIF ...

MHS 45 D Cutting Machine BJ 2003 Machine technically checked-cleaned with dry ice

sheet width: 3200 mm plate thickness: 0.5 - 6.0 mm cutting angle: 1° 30 ° no. of strokes: 14 Hub/min back stop - adjustable: max. 1000 mm down holder: 13 Stück work height max.: 800 mm Control: EASY-VIEW oil volume: 270 l voltage: 400 V engine output: 7.5 kW weight: 6100 kg range L-W-H: 4010 x 1610 x 1620 mm from a maintenance workshop - good condition () was only used sporadically according to the previous seller New price ~ 35.000 euros Furnishing: - electro-hydraulic swing cutting shears - KNUTH EASY-VIEW touch CNC positioning control Robust back gauge with high-quality ball screws - Machine frame & knife bar made of sturdy welded construction - The proven swing-cut design allows for a small knife angle for optimal cutting quality and minimal distortion on the workpiece - hydraulically acting hold-down devices - electro-motoric cutting gap adjustment - continuous adjustment of ...

sheet width: 2540 mm plate thickness: 2.50 mm distance between columns: 2600 mm daylight opening: OW 300 mm adjustment: UW 115 mm pivoting angle: 180 Grad work height max.: 910 mm back stop - adjustable: bis 690 mm voltage: 400 V total power requirement: 3.8 kW weight: 2250 kg range L-W-H: 3640 x 1750 x 1600 mm maintained condition () Furnishing: - robust electro-motive folding machine - Bending angle adjustment via electric potentiometer infinitely adjustable with digital value display - manual % automatic mode selectable - Electrical adjustment of the travel paths of the upper beam - manual lower beam adjustment up to 115 mm - 1x set of bending tools (installed / used condition) - freely movable double foot switch - manual material back gauge, adjustable at the back Adjustment range up to max. ~ 690 mm - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/date ...

General SKU212T479 LocationBarneveld MakeAlbi Alois Binderberger No.446 Year of construction1991 Main Features MaterialStainless steel Volume3640 Ltr. Pressure2 Bar Specified Features - Horizontal tank MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Horizontal tankcheck Capacity3640 Ltr. (max. 3690 Ltr.) Sizes1200x3500 mm ManholeDN600 Top connectionsDN80 (2x) OutletDN25, DN50 Max. temperaturemax. 100 °C Information Mounted on legs4 Floorspace3,5x1,0 m Total height1,6 mHorizontal tanksAlbi Alois BinderbergerTanks > Horizontal tanksBrand > Albi Alois Binderberger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU315T1103 LocationBarneveld MakeAzo TypeG21-text No.045256B Year of construction2005 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter300 mm Specified Features - Miscellaneous transport MaterialStainless steel Miscellaneous transport Capacity2x IBC Information Mounted in framecheck Total height2,71 m CEcheck Mounted on legscheck Floor space4,10x1,40 m ATEX compatiblecheck Extra Specificationsscrew conveyor.type DFS 100x1380 NE300size diameter 100 mm, length 1380 mm,outlet diameter: 125 mm0,75 kW, 230/400 Volt, (Ex) Vibration motor.0.4 kW, 400 Volt, (Ex) stainless steel drum in frame.type D1104XD305 on frame, volume 600 Ltr.connection in: 45 mm, 125mm (2x)connection out: 65 mmground surface: 1.7x1.6 mheight: 1.6 m Miscellaneous transportAZOConveying systems > Miscellaneous transportBrand > AZO What you can expect from Foeth: -- Machine is i ...

General SKU231U210 LocationBarneveld MakePlasmec TypeTRM 200 No.14604897 Year of construction1997 Pressure Working pressure8 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor36 KW Specified Features - Hot mixer Hot/Cold mixercheck Capacity200 Ltr. Vessel sizesDia: 700x580 mm With jacketcheck With motor18-36 kW 400 Volt Pneumatic operated outletcheck(as is) Outletdia. 240 mm MaterialStainless steel Information With switchgearcheck (as is) Total height1,2 m Weight810 kg CEcheck Floorspace2x0,9 mHot mixersPlasmecPlastic machinery > Hot mixersBrand > Plasmec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T470 LocationBarneveld MakeDidier Filtertechnik GMBH TypeMSF 600/F No.HW-16657 Year of construction2003 Pressure Working pressure6 Bar Main Features MaterialStainless steel Pressure6 Bar Vacuumcheck Surface3.1 m2 Specified Features - Horizontal plate filter Filter surface3,1 m² Horizontal plate filters Filter presscheck Filter surface3,1 m² Stainless steel platescheck Number of platens12 Internal platen sizesDia: 564 mm External platen sizesDia: 604 mm Platen thickness48 mm Frame thickness38 mm Cake capacity112 Ltr. Central inletcheck ConnectionsDN 25 (2x) With outlets on platenscheck With hand valvescheck Hydraulic closingcheck With hydraulic unitcheck manual Mechanical closingcheck MaterialStainless steel 1.4571 (316Ti) Information Mounted on wheelscheck Total height2,4m Weight1000 kg CEcheck Floorspace1.5x1 mHorizontal plate filt ...

General SKU222M106 LocationBarneveld MakeSpaans Babcock B.V. Hoofddorp TypeM2 Year of construction1999 Main Features Motor1.1 KW Length1000 mm Inlet diameter370 mm Specified Features - Horizontal screw conveyor MaterialStainless steel Horizontal conveyor screw(1x) Diameter370mm Length1000mm Pitch285mm, Without covers Outletdia. 285mm Motor1,1 KW, 380/660 Volt Information Mach.No.24516/120 Floorspace1,9x0,6 M Total height0,6 MHorizontal screw conveyorsSpaans BabcockConveying systems > Horizontal screw conveyorsBrand > Spaans Babcock What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!