maho mh used for sale

diameter of brush: 250 mm width of brush: 80 mm turning speed range: 1500 / 3000 U/min voltage: 380 Volt total power requirement: 2,0 / 3,0 kW weight of the machine ca.: 175 kg dimensions of the machine ca.: 800 x 400 x 1.300 mm Furnishing: - Deburring handy sheets with notches and contours - Sheet thicknesses up to 6.0 mm are rounded quickly and safely - without forming a secondary ridge - the sheet to be worked becomes manual with light pressure guided along the rotating deburring brush - Simple high speed radial brush rotation - Materials: Steel, stainless steel, aluminium, other non-ferrous metals Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9238987 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mm plate thickness: 1,75 mm ST plate thickness: 2,00 mm ALU plate thickness: 2,50 mm KU thickness at Niro-steel: 0,80 mm distance between columns: 1300 mm daylight opening: OW ~ 380 mm work height max.: 900 mm adjustment: UW 60,0 mm bending angle max.: 180 ° weight: ca. 200 kg kg range L-W-H: 2000 x 520 x 1500 mm good condition () Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9355182 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 1255 mm plate thickness: 4,0 mm ST plate thickness: 2,0 mm VA plate thickness: 6,0 mm ALU number of strokes - loaded: ~ 66 Hübe/min. cutting angle: 1,5 ° total power requirement: 5,5 kW weight of the machine ca.: 2600 kg. range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition () Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325278 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 8,0 mm ST plate thickness: 5,0 mm VA table-size: 1000 x 950 mm blade length: 200 x 200 mm strokes per minute: 60 H/min adjustable: Winkel 30°-140° mm work height max.: ca. 950 mm oil volume: 60 l engine output: 4,0 kW weight of the machine ca.: 1200 kg range L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - 2x blank holders - 1x free moving foots ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min saw band length: 3650 x 27 x 0,9 mm weight of the machine ca.: 640 kg New price ~ 11.500 euros Furnishing: - automatic lowering of the saw arch, with steplessly adjustable feed - with limit stop at the end of the cut - manual / semi-semi-automatic function selectable - 2x saw band speeds - large bearing turntable, for miter cuts from 45° right - 60° left - Vice manually adjustable on both sides - manual material clamping - 1x saw band - rotating chip removal brush - Control panel - front right - hydraulic pressure  ...

turning length: 750 mm turning diameter: 310 mm turning diameter over slide rest: 175 mm spindle bore: 32,0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm spindle taper: DIN 55027 GR 5 total power requirement: 2,2 kW weight of the machine ca.: 710 kg range L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college () Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - NEWALL digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindl ...

pressure: 75,0 t chamfer lenght: 2620 mm distance between columns: 2055 mm column arm: 400 mm ajustment speed: 100 mm/sec working feed: 10,0 mm/sec return speed: 90,0 mm/sec stroke: ~ 140 mm dayligth: ~ 360 mm table height: 930 mm table width: 85,0 mm Control: ELGO P8822 oil volume: 150 ltr. engine output: 7,5 kW weight of the machine ca.: ~ 6.500 kg. range L-W-H: 3700 x 1800 x 2700 mm Furnishing: - electro-hydraulic conventional NC press brake - Swivel control front right, with ELGO P8822 control unit digital position indicator Entry of target/actual values possible - Electro-motor backgauge - X axis Travel = 700mm - electrical adjustment of the immersion depth - Y axes - with 2x manually adjustable stop fingers (R+Z axis) - Upper tool holder with upper wedge crowning - AMADA system - Lower tool holder - System AMADA - very many diverse / divided upper tools - rear guard (door) - lat ...

carrying capacity: 2800 kg number of suction cups: 3 Stück total power requirement: 0,55 / 0,75 kW weight of the machine ca.: ca. 300 kg. New price ~ 11.000 euros Special price on request Furnishing: - Suspension frame with suspension eye for hanging in a hoist hook - Manipulating handle with easy-to-grip manual slide valve - main traverse (length: 2000 mm) - Dimensions suction plates .. 2x 720x720 mm .. 1x 615x615 mm - sliding suction plates - BECKER vacuum pump Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9803043 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1000 mm turning diameter over bed: 356 mm turning diameter over slide rest: 220 mm turning dia. in gap: 506 mm length: 0 mm number of spindle speeds: 30 - 3000 U/min. spindle bore: 38,0 mm tailstock quill taper MT: MK 3 quill stroke: 115 mm bed width: 206 mm adjustment: Plan 180 mm spindle taper: DIN 55029, D1-4 total power requirement: 4,0 kW weight of the machine ca.: 1500 kg range L-W-H: 1850 x 1000 x 1300 mm New price ~ 13,500 euros Special price on request Lathe with precision ground and induction hardened bed. Very suitable for use in workshops and training centres. Furnishing: - Robust main lathe and spindle lathe with VARIO gear - NEWALL B60 digital display, front left - 3-jaw chuck Ø 160 mm, with spare jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel holder with 3x inserts - folding steel holder protection - Infinitely variable speed adjustm ...

Crane remote control, receiver HBC RADIOMATIC FSE 716 ( FSE716 ) Supply voltage: 48 V AC frequency: 433.100 - 434.75 MHz IP 55 with approx. 2.0 m connection cable used, tested ! Dimensions: 400 x 400 x 130 mm

Electronic Module, CPU Module GE FANUC CPU Module 25 MHz ( CPUModule25MHz ) IC693CPU315-GN CPU 351 4200547 New ! Dimensions: 160 x 160 x 80 mm

Electronic module UNICONTROL EMV-SP 4b ERNST EMV-SP 4/5 10 MHz P 17. 1/3 Spare part for wood sanding machine PAUL ERNST KKB/K VBS1300x2500 ! used ! Dimensions: 160 x 108 x 32 mm

Angular gears, gearboxes VOGEL MH 23 ( MH23 ) i = 1,0 A. - No.: R 5454 001 Hollow shaft diameter ( drive ): Ø 28 mm Shaft length: 65 mm Groove width: 8 mm Flange diameter (drive): Ø 130 / 200 mm bolt circle diameter: Ø 165 mm hole diameter: Ø 10,5 mm Hollow shaft diameter ( output ): Ø 32 mm Wavelength: 174 mm groove width: 10 mm all hole spacing (housing): 110 mm all threaded holes: M10 x 1.5, Depth: 25 mm used, checked ! Dimensions: 290 x 200 x 200 mm

Electronic module UNICONTROL EMV-F 1e ERNST EMV-F1 10 MHz V 2 spare part for wood grinding machine PAUL ERNST KKB/K VBS1300x2500 ! used ! Dimensions: 160 x 108 x 32 mm

Three-phase electric motor CEM Type: HETT 132 MH4 ( HETT132MH4 ) Power: 9 kW Speed: 1440 rpm Voltage: 220/ 380 V Frequency: 50 Hz Design: B5, with flange shaft diameter: 38 mm used tested ! Dimensions: 510 x 350 x 300 mm

Extension (light) for probes and probes RENISHAW PEL1 A-1047-3484 A-1047-3484-04 Extension: 50 mm Diameter: Ø 13 mm Thread: M8 Compatible probes: PH10T PLUS, MH8, PH6, PH1, PHS1 Compatible probes: TP20, TP200, TP6, TP2 New ! Dimensions ( extension ): 55 x 13 x 13 mm Dimensions ( packaging ): 62 x 22 x 22 mm

Extension (light) for probes and probes RENISHAW PE1 A-1047-1534 A-1047-1534-03 Extension: 50 mm Diameter: Ø 13 mm Thread: M8 Compatible probes: PH10T PLUS, MH8, PH6, PH1, PHS1 Compatible probes: TP20, TP200, TP6, TP2 New ! Dimensions ( extension ): 55 x 13 x 13 mm Dimensions ( packaging ): 62 x 22 x 22 mm

sheet width: 2050 mm plate thickness: 6,0 mm pre-bending capacity: 4,0 mm upper roll diameter: 200 mm lower roll diameter: 180 mm bending speed: 5,2 m/min diameter: ca. 280 mm work height max.: 980 mm total power requirement: 5,5 kW weight of the machine ca.: 3500 kg. range L-W-H: 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device Inclination of the side rollers by handwheels Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50% - free-moving operation electric delivery rollers electric turning/rolling movement digital positi ...

Extension (light) for probes and probes RENISHAW PEL2 A-1047-3485 A-1047-3485-04 extension : 100 mm Diameter: Ø 13 / 18 mm Thread: M8 Compatible probes: PH10T PLUS, MH8, PH6, PH1, PHS1 Compatible probes: TP20, TP200, TP6, TP2 New ! Dimensions ( extension ): 105 x 18 x 18 mm Dimensions ( packaging ): 115 x 26 x 26 mm

volume capacity: 2000 m3/h feed volume: 99,5 % compressed air: 4,0 - 6,0 bar voltage: 380 V motor: 3,0 KW weight: ca. 185 kg The KEMPER mobile cartridge filter is designed for the extraction of pollutants that arise during the various electric welding processes. In principle, the device can be used in all work processes in which particulate pollutants, i.e. smoke and dust, are released. However, you should make sure that no rain of sparks (e.g. from a grinding process) is sucked into the filter device. Furnishing : - Mobile welding fume extraction or mobile cartridge filter - Suction without suction hose - User manual + wiring diagram (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9451130 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: 16,0 kVA 50% ED welding power: 35,0 kVA max. contact pressure capacity: 240 daN throat: 230 mm 0: 380 V electrode stroke: 15 - 85 mm weight: 116 kg range L-W-H: 1000 x 400 x 1100 mm Furnishing: - Spot welding machine from a training workshop - Welding control TE 90 Mark II Welding control TE 90 is a microprocessor control for single-phase resistance welding machines. The welding controller has the task of To control machine elements, especially the SCR, which controls the adjustment of the control the welding current. The duty cycle that the TE 90 performs is described using the programming parameters. - SCR synchronous control, welding time regulation by phase cut - Simple programming via 4 buttons - Current rise and pulses - Single point and automatic - Secondary current compensation for welding dirty metal sheets and wires - Welding time lock optimizes current draw fr ...

sheet width: 2030 mm plate thickness: 1,0 mm roll length: 2050 mm roll diameter: Ø 95,0 mm work height max.: 950 mm engine output: 1,0 kW weight: 275 kg range L-W-H: 2700 x 700 x 1160 mm Furnishing: - motor-driven asymmetrical 3-roller bending machine - hardened rollers - Manual folding storage for quick removal of the workpiece - Profile inlets at the end of the roller - Double foot switch for R/L run and emergency stop button - rear roller manually adjustable - manual infeed of the bottom roller - electrical safety device Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9401257 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4,0 mm ST plate thickness: 3,0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4,0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9397092 The data for this ad was created with ModulMWS - the software solution of  ...

turning length: 1000 mm turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm number of spindle speeds: 25 - 2000 U/min. turning speeds: 18 Stk. spindle bore: Ø 56,0 mm tailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mm bed width: 310 mm spindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/U feeds - cross: 0,011 - 0,4 mm/U thread: M 0,3 - 10,0 mm voltage: 380 V total power requirement: 7,5 kW weight of the machine ca.: 1600 kg range L-W-H: 2320 x 1400 x 1600 mm Machine from a workshop for the disabled Lathe with precision ground and induction hardened bed. Very suitable e.g. for use in workshops and training centres. Furnishing: - Robust main lathe and spindle lathe with VARIO gear - 2 axis HEIDENHAIN digital display, front left - FORKARDT 3-jaw chuck Ø 200 mm, with spare jaws & chuck key - foldable lathe chuck protection - MULTIFIX steel h ...

x-travel: 510 mm y-travel: 450 mm z-travel: 410 mm taper in main spindle: MAS BT 45° (SK40) table surface area: 800 x 395 mm T-slots: 6 turning speeds: 50 - 2500 U/min feed stepless: 4-1600/4-1000 mm/min voltage: 400 V total power requirement: 5,0 kW weight of the machine ca.: 1400 kg range L-W-H: 2300 x 2300 x 1800 mm from a training workshop maintained condition () Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left Digital display - without function Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9131203 The d ...

Other Info: 1 MHG - SMG 25 Shotblasting MACH-ID 7660 Make: MHG Type: SMG 25 Shotblasting

sheet width: 2550 mm plate thickness: 4,0 mm thickness at Niro-steel: 3,0 mm cutting angle: 1°30 down holder: 12 Stück no. of strokes: 30 - 40 Hub/min back stop - adjustable: ca. 950 mm Control: DAC 150 engine output: 7,5 kW weight: 2800 kg range L-W-H: 3100 x 1900 x 1700 mm very well-maintained condition () Furnishing: - electro-hydraulic sheet metal shears // swing cut - DELEM DAC 150 NC control operable from the front Entry of target / actual for electr. backgauge - NC motorized backgauge with ball screws + guide shaft - electrical cutting length limitation - manual cutting gap adjustment - 1x side stop - 2x support arms - 1x free moving footswitch - front finger protection - EMERGENCY OFF button + main switch at the front - Instruction manual control Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325295 The data for this ad was create ...

saw blade diameter: 350 mm cutting diameter: 110 mm capacity 90 degrees: flat: 180 x 85 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: flat: 130 x 85 mm capacity 60 degrees: round: 105 mm capacity 60 degrees: flat: 90 x 85 mm turning speeds: 9-18-36-74 U/min vice: max. 180 mm Control: IMET CNC total power requirement: 1,5 / 2,2 kW weight: 710 kg range L-W-H: 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. ...

Brotschneidegatter, Fabr. MHS, model BM 45 NU

rated capacity: 10,0 kVA 50% ED welding power: 20,0 kVA max. contact pressure capacity: 220 daN throat: 520 mm 0: 380 V electrode stroke: 15 - 85 mm weight: 95,0 kg range L-W-H: 1000 x 400 x 1100 mm Furnishing: - Spot welding machine from a training workshop - Welding control TE 90 Mark II Welding control TE 90 is a microprocessor control for single-phase Resistance welding machines. The welding control has the task of: To control machine elements, especially the SCR, which controls the setting of the Control welding current. The duty cycle that the TE 90 performs is described using the programming parameters. - Synchronous control SCR, welding time regulation by phase cut - Easy programming via 4 buttons - Current surge and pulsing - Single point and automatic - Compensation of the secondary current for welding dirty metal sheets and wires - Welding time locking optimizes power consump ...

used bread slicer MHS Ideal SB year 2010? Product? Manufacturer: MHS Schneidetechnik GmbH? Type: MHS Ideal SB? Material: stainless steel? Condition: used, cleaned, tested? Year of construction: 2010? Adjustable cutting width (10, 12 and 14 mm)? for all types of bread? on wheels, drivable? External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cmSee pictures for details.Is the right item not listed? We have a wide range of machines and accessories for bakeries, confectioneries and the catering industry.Feel free to contact us or take a look at our other advertisements.

x-travel: 950 mm y-travel: 400 mm z-travel: 500 mm tool taper: ISO 50 throat: 510 mm quill stroke: 105 mm spindle turning speed range: 18 - 1800 U/min feeds: 16 - 627 mm/min rapid traverse: 1670 mm/min table-size: 1400 x 400 mm table load capacity: 500 kg T-slots: 3x14x100 mm distance spindle /table: 150 - 650 mm engine output: 9,0 kW weight: 3660 kg dimensions of the machine ca.: 2290 x 1770 x 2120 mm current new price approx. 60.000 euros Special price on request The heavy universal bed milling machine offers wide guides and high Drive power for superior cutting performance and is with your Extensive equipment ideal for plant and mechanical engineering suitable. The heavy vertical milling head can be swiveled right and left, The quill can be moved manually and the spindle speed can be adjusted continuously regulate. The feed in the Y and X axes can be done via a robust Manual transmi ...

Circular Knife Machine Stainless steel version Knives newly sharpened and coated Manual operation via rotary control Disc thickness adjustable from 5 - 15 mm Dimensions: 650 x 690 x 1100 mm, WxDxH DGUV V3 tested Connection 400V, 1 KW, 16A-CEE plug Used machine cleaned and inspected 6 months warranty More bakery equipment in stock1

Manufacturer: Homag Eltec Steuerkarte, Type: Hmag-2/mit ACR 1 Ausgang, Model: CPU 30 E16-103 4 MB 25 Mhz ohne Grafik,

Manufacturer: Homag, Type: Rechnerkarte, Model: CPU-Karte 70 BO 10 MHz 2 RAM, Serial number: 4-086-05-194,

Manufacturer: Stalam, Type: RF 30, Year: 1996, Control: Programm, Working widht mm: 1350, Working hight mm: 100, Frequency of generators MHz +/-: 27,12, Conveyor lenght mm: 11000, Feedin speed m/min: ca. 7, Belt conveyor: yes, Generator 1 kW: 30, Generator 2 kW: 30, Fan inside the dryer: yes, Cooling unit at the out-feed: yes, Cooling of gernators by air: yes, Year :1996

sheet width: 2540 mm plate thickness: 2,0 mm thickness at Niro-steel: 1,25 mm no. of strokes: 34 Hub/min cutting angle: 1,4° table height: 820 mm distance between columns: 2600 mm Control: konv. engine output: 4,0 kW weight of the machine ca.: 1330 kg. range L-W-H: 2892 x 1865 x 1430 mm Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - All-steel knife, double-edged - 1x hold-down bar - Support/work table with 10 mm gaps - extended, extendable support table - freely movable foot switch - Operation manual Special accessories included: - electro-motorized back gauge with analogue position display Fine adjustment via handwheel at the front - Sheet metal holding device for thin sheet metal cuts Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -93253 ...

Product number: 2820J Type: IC700/24D Serial number: 081403 Year of construction: 2003 Product size: max 250 x 240 mm Product length: max 700 mm Power: 3 x 415V, 50Hz, 5.6kW Dimensions: 2000 x 1000 x 1450 mm Weight: 350 kg

sheet width: 1040 mm plate thickness: 4,0 mm thickness at Niro-steel: 2,5 mm blade length: 1100 mm no. of strokes: ca. 38 Hub/min back stop - adjustable: ca. 500 mm Control: konv. table height: 820 mm Number of working hours: ca. 610 h engine output: 5,0 kW weight: 2250 kg range L-W-H: 1650 x 1900 x 1300 mm Machine from a maintenance workshop with only approx. 610 operating hours () Furnishing: - heavy / robust electro-mechanical sheet metal shears - Machine body in a closed design as an all-steel welded construction - heavy / robust drive motor (5.0 KW) - manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale - 1x side stop - 2x front support arms with T-slot - manual central lubrication - Operating hours counter - Special accessories: 1x set of LOTZE replacement knives Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 - ...

sheet width: 500 mm plate length: 1000 mm plate thickness: max. 6,0 mm pressure: 28,0 t throat: 500 mm height of stroke: 0 - 40 mm working area: X = 1200 mm working area: Y = 570 mm no. of strokes: max. 180 Hub/min punch diameter: max. 105 mm work height max.: 900 mm oil volume: 50 l total power requirement: 4,0 kW weight of the machine ca.: 2500 kg range L-W-H: 2400 x 1580 x 1540 mm New price including accessories approx. 30.000 euros Special price on request The hydraulic punching machine ECCO LINE is specially designed for processing Sheet metal and profile parts have been optimized. She stands out for her Flexibility and manufacturing precision. The machines in the ECCO series LINE are equipped with 28 t punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 seconds (manually) How it works: After installing the tool, the stops are in X and Y p ...

sheet width: 3050 mm plate thickness: 1,60 mm bending angle max.: 120 ° stroke of upper beam: 50 mm work height max.: 900 mm Control: konv. weight: 2120 kg range L-W-H: 3620 x 900 x 1350 mm Machine from a plumbing or roofing shop Furnishing: - manual folding machine for thin sheet metal processing - split bending upper tool - analogue bending angle display - manual clamping of the upper beam using the side hand lever - manual pivoting movement of the bending beam - including counterweight for easy swivel design - manual backgauge Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9355195 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 23,0 / 28,0 mm throat: 260 mm bore stroke: 120 mm spindle taper: 3 MK table:: 415 x 390 mm T-slots: 2x B 22,0 mm table height: 880 mm turning speeds: 160 - 2800 U/min column diameter: 110 mm total power requirement: 0,7 / 1,3 kW weight: 275 kg range L-W-H: 900 x 1100 x 1900 mm Machine from a vocational school very good condition () TABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT Furnishing: - pole-changing motor - Continuous speed adjustment including analogue speed display - Spindle feed manually via cross handle - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Front main switch - Machine base including cabinet door Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9093639 The data for this ad was created with ...

x-travel: 750 mm y-travel: 250 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1270 x 260 mm feed:: 24 - 402 mm/min. turning speeds: 45 - 1660 U/min distance spindle /table: 175 - 520 mm rapid traverse: Z Achse 660 mm/min throat: 0 - 550 mm total power requirement: 2,2 kW weight of the machine ca.: 1400 kg range L-W-H: 1715 x 1470 x 1660 mm current new price ~ 13.500 euros Special price on request The universal milling machine UWF 110 is suitable for this purpose of light and medium-heavy milling work. Thanks to their great Versatility and easy conversion, it can be used in workshops for successfully processing small and medium-sized series be used. Furnishing : - Universal milling head, adjustable to all angle positions - Swivel control panel with ergonomically positioned switches - Heavy machine stand made of gray cast iron for vibration-free work - Dovetail guide with adjustab ...

pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of upper beam: 130 mm throat: 200 mm dayligth: 310 mm working feed: 7,0 mm/sec return speed: 50,0 mm/sec Control: konv. work height max.: 905 mm table width: 180 mm oil volume: 250 Liter total power requirement: 7,5 kW weight: 7800 kg range L-W-H: 3500 x 1700 x 2280 mm Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) including analogue depth display - manual backgauge, with analogue position display adjustable from the front on ball screws 2x manually adjustable stop fingers - Manual (jog mode) and automatic cycle selectable - split deer foot upper tool (segmented) - 2x reversible MULTI V die blocks - 1x freely movable foot control Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?m ...

used MHS Ideal bread slicer SB year 2013? Product? Manufacturer: MHS Schneidetechnik GmbH? Type: MHS Ideal SB? Material: stainless steel? Condition: used, cleaned, tested? Year of construction: 2013? Adjustable cutting width (10, 12 and 14 mm)? for all types of bread? on wheels, drivable? External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm? Power: 230 V+N+PE / 4.8 A / 1.01 kWDedetails see pictures.Is the right item not listed? We have a wide range of machines and accessories for bakeries, confectioneries and the catering industry.Feel free to contact us or take a look at our other advertisements.

Used MHS Ideal Bread Slicer SB Year 2012? Product? Manufacturer: MHS Schneidetechnik GmbH? Type: MHS Ideal SB? Material: stainless steel? Condition: used, cleaned, tested? Year of construction: 2012? Adjustable cutting width (10, 12 and 14 mm)? for all types of bread? on wheels, drivable? External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cmSee pictures for details.Is the right item not listed? We have a wide range of machines and accessories for bakeries, confectioneries and the catering industry.Feel free to contact us or take a look at our other advertisements.

used bread slicer MHS Ideal SB year 2011? Product? Manufacturer: MHS Schneidetechnik GmbH? Type: MHS Ideal SB? Material: stainless steel? Condition: used, cleaned, tested? Year of construction: 2011? Adjustable cutting width (10, 12 and 14 mm)? for all types of bread? on wheels, drivable? External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cmSee pictures for details.Is the right item not listed? We have a wide range of machines and accessories for bakeries, confectioneries and the catering industry.Feel free to contact us or take a look at our other advertisements.

sheet width: 3050 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm cutting angle adjustment: 0,5 - 2,5 ° cutting gap adjustment: 0,05 - 1,0 mm back stop - adjustable: 10 - 1000 mm adjustment speed: 180 mm/s down holder: 14 Stück strokes per minute: 12 - 25 oil volume: 300 Liter 0: max. 300 bar voltage: 400 V main drive: 18,5 kW weight of the machine ca.: 10.000 kg. dimensions of the machine ca.: 4080 x 2350 x 2060 mm maintained condition () was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Aut ...

dimensions of saw-blade: 250 mm cutting range: 80,0 mm capacity 90 degrees: square: 70 x 70 mm capacity 45 degrees: round: 80,0 mm capacity 45 degrees: square: 60 x 60 mm work height max.: 900 mm saw blade turning speeds: 20 / 40 U/min engine output: 1400 / 2800 U/min. total power requirement: 1,1 kW weight: 175 kg range L-W-H: 550 x 950 x 1800 mm Furnishing : - manual cross-cut/cold circular saw - for cutting profiles, pipes, solid materials - manual vice with star handle - including miter adjustment - ergonomic control handle - Pole-changing drive motor - 1x BEWO feed roller conveyor - Coolant device - Machine base Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9164089 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32,0 mm bore capacity in cast iron: 36,0 mm throat: 280 mm bore stroke: 150 mm turning speeds: 80 - 1400 U/min table-size: 400 x 550 mm morse taper: MK 3 feed: 0,1-0,2-0,3 mm/U total power requirement: 1,1 / 2,0 kW weight of the machine ca.: 350 kg range L-W-H: 800 x 600 x 1900 mm Furnishing : - Column drilling machine - Drive: V-belt - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Connection cable + 16A plug Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9103736 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.