hm daenemark used for sale

BLISTER LINE ROMACO NOACK (BLISTERING MACHINE + CARTONING MACHINE) Year of construction: 1998 Blister packing line consisting the following two machines, both electrically upgraded in 2020 with new PLC and HMI. Noack 920 blister packer: Maximum draw depth: 12 mm Maximum foil width: 160 mm Maximum capacity: 80 forming strokes per minute Blister collation system for feeding into the cartoner Automatic tablet track in-feed system Tablet feeders into brush box Suitable for packaging tablets or capsules into Alu/Alu or PVC/Alu blisters Variable speed Laetus vision system Vacuum system HAPA H-226-C printer Romaco Promatic P150 fully automatic horizontal intermittent cartoning machine: High production speed, format change without tools Carton dimensions: minimum: 20mm x 15mm x 60mm; maximum: 100mm x 85mm x 150mm Minimum carton dimensions: 20mm x 15mm x 60mm Ma ...

x-travel: --- mm y-travel: --- mm z-travel: --- mm total power requirement: --- kW weight of the machine ca.: 13,5 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Features: • Format range 100 x 153 mm • Output max 240 Blister/min (depending on product and format) • Drawing depth max. 12 mm (max. 24 mm after conversion) • Punching station output max. 60 cycles/min. • Pre-draw max. 125 mm • Plate sealing • Forming film rigid PVC, PVC/PVDC (Alu forming optional) • Film width max. 170 mm • Film thickness 0.1-0.35 mm • Sealing film aluminum • Perforating station • Batch embossing • Forming with air pressure • Blister transfer with bad ejection • Without format parts • Connection 380V/50Hz This blister machine has been mechanically overhauled in our specialist workshop. The entire electrical/pneumatic system has been renewed. The machine control system was equipped with the latest control technology. The following parts were replaced: • PLC B+R X20 with Automation Panel 12.1 WXGA TFT, system unit PPC3100 • Serv ...

General SKU204U935 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.120712 Pressure Working pressure20 Bar Main Features Heating (medium)Steam Capacity24 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:Water Heating capacity24 kW Electric capacity31,1 kVa, 42,3A With coolingcheck (no cooling compressor) Capacity69,6 kW Temperature+10/+200°C Tank capacity25 ltr. With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2800 rpm Motor4 kW, 340-690 volt, With temperature controllercheck With controlTouchscreen MaterialMild steel Information Year of construction05-2012 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,60x0,36 m Total height1,32 m Weight309 kg Extra Specificationstest pressure 32,5 barTemperature control unitsSingle TemperiertechnikHeat exchangers > Tem ...

General SKUR1410 LocationBarneveld MakeHosokawa Micron B.V. (NL) TypeHMPD-20-10 (easy clean) No.6444301000 Year of construction2000 Main Features MaterialStainless steel Motor0.55 KW Inlet diameter200 mm Specified Features - Rotating valve MaterialStainless steel Rotary valvecheck Rotor diameterca. 250mm Rotor width215mm Number of locks:6 Lock sizes215x115x55mm Inletdia. 200 Outletdia. 200 Installation height390mm (with extension 490mm) With motor0.55 kW 230/400 Volt Rotor speed23 rpm Information Total height0,5 M Weight200 Kg CEcheck Floorspace1,3x0,5 MRotating valvesHosokawa MicronRotary valves > Rotating valvesBrand > Hosokawa Micron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands ...

General SKU345S729 LocationBarneveld MakeG.A.B. Neumann HmbH TypeN-B-2.0 No.14404-11518 Year of construction1994 Pressure Vacuum possible jacketcheck Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface2 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface2,0 m² Tube capacity12 Ltr. Max. temperature-10/180 °C Shell capacity12 Ltr. Max. temperature-10/80 °C Information Weight210 KgShell and tube heat exchangersGab NeumannHeat exchangers > Shell and tube heat exchangersBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...

General SKU282P450 LocationBarneveld MakeCisa Type6412L/2P/E/TS/SV No.6305 Year of construction1997 Pressure Working pressure3.5 Bar Vacuum possiblecheck Working pressure jacket3.5 Bar Main Features MaterialStainless steel Volume500 Ltr. Pressure3.5 Bar Specified Features - Autoclave Horizontal autoclavecheck Capacity500 Ltr (432 Ltr nett) Internal width640 mm Internal depth1220 mm Internal height640 mm Inlet/Outlet700 x 680 mm With trayscheck Tray sizes1200 x 600 mm Max. temperature148 grd C With jacket103 Ltr Max. temperature148 grd C Electric heatedInternal steam generator 4 bar - 45 kg/hour (Cisa S/N 6306 1997) Electric capacity31 kW Insulatedcheck With vacuum pump17-57 M³/h 33-200 mbar Motor2,2 kW 220-240 / 380-420 Volt With pump3 M³/h - Hmax 40 M Motor0,8 kW 220-240 / 380-415 Volt With transport trolleycheck MaterialStainless steel 1.4404 (316L ...

CM35 AdvancedLine Checkweigher: Customer-specific sorting, MID conformity 1st stage, infeed conveyor, collection container, outfeed conveyor, covers, FreeWeight Nt incl. statistics, HMI 15" incl. AdvancedLine software, multi-resolution load cell, pusher, signaling device, weighing technology EMFR load cell, user management, machine status monitoring, sensor monitoring, emergency stop button, Tesco Standard 2 sorting Profiles LS Combi Metal Detector: opening width 350 mm, opening height: 150 mm, operating sequence: 100/300/800,

General SKUR1397 LocationBarneveld MakeVakumix AG (DE) TypeHM2-008 with lid-lifting device No.1033070 Mach.No.1033070 Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume3.1 Ltr. Motor5.5 KW Specified Features - Processing vessel MaterialStainless steel 1.4404 (316L) Processing vessels Capacity3.1 Ltr Closed stirring vesselcheck Capacity3,1 Ltr (Nett.2,5-2,0 Ltr ) Vessel sizesdia. 150x160mm Dished bottomcheck Dished top sidecheck With covercheck Outletdia. 25mm With jacket(0.44 Ltr) Max. temperature180 degr.C. With anchor stirrercheck Motor0.37 KW, 400 Volt Speed mixing shaft10-410 rpm With homogeniser(500 - 14000 rpm) Motor5.5 KW, 400 Volt Information Year of construction2004 Total height1,9 M Weight300 Kg CEcheck With switchcheck Floorspace1,0x1,0 M Extra Specificationsincl ...

Complete with Lns Quick Load Servo Iii bar loader Max Distance between Tips mm. 970 / Min. mm. 210 Max Turning Diameter mm. 190 Main Spindle: Spindle Nose (Asa Attachment) Asa A2-6 Spindle speed (Min./max.) Rpm/min. 4,500 Spindle Motor Power Kw Kw. 11/15 Bar passage mm. 65 Counter spindle Spindle Nose (Asa Attachment) Asa A2-5 Spindle speed (Min./max. )g./min. 5,000 Spindle Motor Power Kwkw. 11/7.5 Bar passage 51 mm Number of upper turrets 2 Number of Lower Turrets 1 X Axis Travel mm. 167.5 Z Axis Stroke mm. 250 Y Axis Travel mm. 102 X Axis Travel 2mm. 167.5 Z Axis travel 2mm. 250 Y Axis travel 2mm. 102 X Axis Travel 3mm. 167.5 Z Axis travel 3mm. 685 Fanuc 16i-tb control Dimensions W D Hmm.3.930 X 2.270 X 2.110 2 High Pressure Pumps Paper Filter Conveyor Finished Pieces External mat Weight 12,000 kg Year 2004

NEW - year of construction 2022, with Lehnhoff MS01 mount, incl. 1 chisel, 105 kg own weight, suitable for 1 - 2.5 t excavators

Technogel 4000E Rotary filling machine Year 2010, Stainless, compact rotary filling machines, capacity 4000 pcs per hour, HMI screen controls, variable speed, mobile, 3Ph

Metos Proveno 300SM combi kettle 2016, stainless mixing kettle with scrape surface, 300l capacity, temp range 0 -120'C, heavy duty stainless hinged safety lid, HMI touch screen controls, 2Kw

Allfill model S10 Duplex, complete 316 stainless steel construction. 2 head fully automatic volumetric auger filler, height adjustable filling heads, pneumatic neck clamps. 3m stainless steel slat conveyor with pneumatic gating system. Vacuum take off system. Touchscreen HMI panel control system. Twin auger hoppers fed by Guttridge Bulkflo spiral auger feeding system. Approx 350litres/200kg capacity. Mobile on castors, full feature control panel, automatic feeding system. Dimensions - Allfill - 3m x 1.4m x 2.4m high. Guttridge - 2.5m x 1.3m x 2.5m high.

PAL FP8 Rotary filler 2017, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.

Romaco Fryma Koruma Dinex process mixing vessel suite in UNUSED condition comprising of the following:- Main Process Vessel: 1300L scraped wall, contra rotating, jacketed, full vacuum +6bar. Bottom entry homogeniser mounted in vessel base unit which also houses the hydraulic raise/lower powerpack for the vessel lid, vacuum pump, centrifugal CIP pump, shrouded in stainless steel. 8 off top connections and level sensor, 300mm dia hinged safety interlocked chargeport with sightglass and light. Scrape wall mixer 5kw, contra rotating mixer 4kw. 45kw 2865rpm homogeniser. Additional vessels: 1300L jacketed premix vessel on load cells, scraped wall mixer with baffles. 400mm dia safety interlocked hinged chargeport with sightglass and light. 4 off top entry infeed connections, 3 stainless steel lobe pump mounted onto vessel framework, 4 outlet with pneumatic actuated valve. 100L powde ...

Short circuit force [kN] 800 Dimensions of fastening plates (hxv) [mm] 630 x 630 Clearance between columns (hxv) [mm] 420 x 370 Min./ max. mold height [mm] min 250 Maximum opening width [mm] 475 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 169 Injection size [g] 153.8 Injection pressure [bar] 2083 Dimensions and weight Net weight with control cabinet [t] 4.1 Dimensions (L x W x H) [m] 3.86 x 1.89 x 1.33

Obráběcí centrum SPEED 1110 je v dobrém technickém stavu, po dohodě možné vidět pod proudem. Obrobková probe Heidenhain TS740. Automatická výměna nástrojů - 10 pozic, chlezení středem (pouze vzduch). Hmotnost stroje: 15000 kg Podélný pohyb stolu - osa x: 1100 mm Příčný pohyb stolu - osa z: 700 mm Svislý pohyb stolu - bear and: 1000 mm Kužel vřetena: HSK A80 Otáčky vřetena: 30 - 14000 ot / min Rozměry stroje d x š x v: 4400x5500x3810 mm

Used circulation dissolver HUBBES type HMUD with a capacity of 2000 l The all-purpose mixer is suitable for the preparation of different masses, such as creams, fat masses, etc. The container is made of stainless steel, single-walled. Three suspension points are mounted on the container, on which the container is stored and has been provided with load cells, for automatic loading and exact display of the contents. A manhole with protective circuit mounted in the drive dome enables monitoring of the mixing process as well as cleaning and maintenance work. The drive for the central shaft with wall scraper and the rotating dissolver shaft are located in the drive dome. For HUBBES, the central shaft for the wall scraper is typically designed without floor support. Four feed nozzles and an outlet for emptying are installed for loading the individual components. Useful volume: 3,00 ...

Automatic Packaging and ShrinkIng Line Reepack This line is a fully automatic packaging and shrinking line. For a quick overview have a look at the video below. This line consist of the following equipment: Reepack BT 1000 DL Vacuum Chamber belt machine; Reepack ST 80 Shrink Tunnel; Reepack DT 80 Drying Tunnel: 1. REEPACK BT 1000 DL VACUUM CHAMBER BELT MACHINE Vacuum Chamber belt machine suitable for packaging food-stuff in large batches into their bag. An automatic loading conveyor belt permits to move the products in bag and entering in the vacuum chamber for processing. A wide range of bags quality and thikness can be used and in case of shrinkable bags the machine can be fixed in line with an automatic shrinking tunnel and finally an automatic drying tunnel. Technical Data: Vacuum chamber dimension: 1000 x 800 x H250 mm Chamber useful height: 2 ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 23000 € : 471.5 € : 1550 mm : 4.5 mm : 4.5 mm : 3.5 mm : 4.5 mm : 3.5 mm : 3.5 mm : 2.5 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3300 mm : 1150 mm : 1110 mm : 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ZWKPAK2_M2 - Toilet paper packing machine With pallet wrapping machine The machine is designed for packing rolls of toilet paper in unit packages prepared, delivered by suppliers fastened in packages. The work takes place in an automatic cycle and does not require special skills from the operator. After starting the machine, the operators task is to arrange packages of bags in warehouses: - double current from which bags will be taken during packing, and - double auxiliary designed for quick substitution of packaging to be picked up by the machine after exhaustion of packaging in previously used warehouses of the machine. Replacing warehouses is extremely simple, it consists in moving from one position of the table with warehouses to another. A skilled operator will perform this activity without stopping the production process. Rolls of toilet paper are moved with tape to th ...

Model: JDM650-BIB Function: High-speed, Automatic Bag In Box Bag Making Machine; Tap & Nozzle Automatic Put Online Feature: 1. Bag have 4pcs film; 2. Punch on film, then welding nozzle, make bag; 3. Two units main unwinding; 4. Inverter motor control unwinding continuously, loop control system control tension steadily and reasonably; 5. Triple AC servo motor infeed film, ensure system tension reasonably and steadily, faster and correct, film non deformation; compare with normal machine, main drive is AC servo motor, ensure high production ratio and enough sealing time; 6. Vertical & horizontal use heating and cooling finalize the design, make sure good sealing; 7. Automatic nozzle structure is consist of nozzle stock bin, lifter, vibrating disk, belt, nozzle; 8. High degree of automation, nozzle reliability, ensure bag cleaning; 9. PLC control whole machine, HMI paramete ...

Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC control HMC 400 CNC X-axis travel 400 mm Y-axis travel 250 mm Z-axis travel 580 mm C-axis (table rotation) ± 200° Max. grinding wheel diameter Ø 200 mm Spindle speed (grinding) 3000 / 6000 rpm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Centrifugal pump, single-stage LOWARA CEA210/3/D-V 104480060 Q: 120 - 300 l/min H:: 19.7 - 14.4 m Hmin: 14.4 m Motor: SM80BG/311PE 1.1 KW 220 - 240 / 380 - 415 V 3AC 50 Hz IP55 Pump Foot: 198 x 40 mm hole spacing: 150 mm 2x slotted hole: Ø 11 mm, length: 18 mm Pump material: stainless steel used, tested ! Dimensions (pump): 420 x 220 x 260 mm

Centrifugal pump, single-stage LOWARA CEA210/3/D-V 104480060XAA Q: 120 - 300 l/min H:: 19.7 - 14.4 m Hmin: 14.4 m Motor: SM80BG/311PE 1.1 KW 220 - 240 / 380 - 415 V 3AC 50 Hz IP55 pump foot: 195 / 175 x 183 mm hole spacing: 128 / 150 mm 4x Bore: Ø 11 mm material pump: stainless steel used, tested ! dimensions (pump): 420 x 220 x 260 mm

Centrifugal pump, single-stage LOWARA CEA120/5/C 104290040 Q: 60 - 160 l/min H:28.2 - 17.3 m Hmin: 17.3 m Motor: SM80BG/311HE 1.1 KW 220 - 240 / 380 - 415 V 3AC 50 Hz IP55 Pump Foot: 195 / 175 x 183 mm hole spacing: 128 / 150 mm 4x Bore: Ø 11 mm pump material: stainless steel used, tested ! Dimensions (pump): 420 x 220 x 240 mm

• Permissible load 1,500 kg • Mixing blades in container lid • Chopper unit, removable • Ceiling bearing • Light curtain • Approach station for containers • PLC Siemens S7-300 CPU 313C • Danfoss servo inverter • HMI Siemens Touch Panel • Project management • Printer • 4 Bohle MCG 1600 mixing containers (photo shows MCG 1200, not supplied) • Jungheinrich EJC 210 container pallet truck, rated load capacity 1,000 kg • Container floor scale Bizerba with printer, weighing range 10.0 -1,500.0 kg • Drive 400/24V/50Hz/8.75KW • Possibly with qualification documentation • Only 712 operating hours! • The mixer is ready for operation in a pharmaceutical company in northern Germany and can be inspected there by arrangement. Available from week 32/2024

General SKU204U938 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.120711 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity24 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:Water Heating capacity24 kW Temperature+10/+200°C Tank capacity25 ltr With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor4,0 kW,400-690 volt, 2950 rpm With temperature controllercheck With controlcheck Information Year of construction5/2012 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,6x0,35 m Total height1,32 m Weight310 kg Extra SpecificationsPower 31.1 kVA, 43.3ATest pressure 32.5 bar Machine casing is not present.Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature c ...

General SKU204U939 LocationBarneveld MakeSingle TypeSTW 200/1-12-25-H2.1 Mach.No.083816 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity12 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:Water Heating capacity12 kW Temperature+10/+200°C Tank capacity24 Ltr. With pumpcheck CapacityQmax 200 ltr/min, Hmax 80m, 2800 rpm Motor400-690 volt, 4,0 kW, 2950 rpm With temperature controllercheck With controlcheck Information Year of construction2008 With switchcheck CEcheck Floorspace1,65x0,32 m Total height1,20 m Weight310 kg Extra SpecificationsPower 18.2 kVA, 26.4A Test pressure 32.5 bar Machine casing is not present. Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand >  ...

General SKU204U940 LocationBarneveld MakeSingle TypeSTW 200/1-12-25-H2.1 Mach.No.083817 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity12 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:water Heating capacity12 kW Temperature+10/+200°C Tank capacity24 Ltr. With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor4,0 kW,400-690 volt, 2950 rpm With temperature controllercheck With controlcheck Information Year of construction2008 With switchcheck CEcheck Floorspace1,6x0,35 m Total height1,32 m Weight310 kg Extra SpecificationsPower 18.2 kVA, 26.4A Test pressure 32.5 bar Machine casing is not present. Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Sin ...

• Set up for ALU/PVC-PVDC-ACLAR, 1-lane • Plate forming, roller sealing • Output max. 350 blisters/min, max. 175 cartons/min • Moulding area blister in running direction max. (W x L) 180 x 140 mm • Blister width 30-90 mm • Blister length 60-140 mm • Drawing depth 3-12 mm • Folding carton dimensions (W x L x H) 35-95 x 65-145 x 12-100 mm • Hapa 230-T-1C-LR flexo printing unit, unused • Directional feeder (Sombrero) for tablets / capsules • Brush box feeder for coated tablets and film-coated tablets • Sealing pressure control • Print mark control cover film • Blister embossing station • Blister perforating station • Integrated cooling device • Product inspection with colour camera (1024-800 pixels) and code reading by IMA Antares-Vision system • Code reading Pharma Code, Data Matrix, EAN, etc. for 2x leaflet, leaflet presence, folding carton • Refill  ...

workpiece weight: 300 kg workpiece length: 1500 mm dia. on complete length: 450 / 1280 mm electrics - voltage/frequency: 400 / 50 V/Hz balancing speed variable: U/min Control: CAB 700 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centrifugal pump, single-stage LOWARA CEA120/5/A 104480040 Q: 60 - 160 l/min H: 28,2 - 17.3 m Hmin: 17.3 m Motor: 1.32 KW 220 - 240 / 380 - 415 V 3AC 50 Hz IP55 Suction Side: 1 1/4 ( inch) ) Print Side: 1 ( inch ) Pump material: stainless steel control box is damaged ! used, tested ! Dimensions (pump): 335 x 215 x 225 mm

Inv. číslo: 7454 Type: Spyre SPR 500 Výrobce: LASCAM Vyrobeno: 2021 Parametry: Maximální výkon: 500 W Výška stroje: 1400 mm Délka stroje: 1700 mm Šířka stroje: 700 mm Hmotnost stroje: 475 kg

Assembly is not required - ready to use immediately. Specifications: Working length: 6020mm Working width: 1300mm Space requirements: 6800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm Bending angle: 135° Machine weight: 2900kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 20mm Offset angle adjustment Characteristics: Ultra fast Hyper production Hydraulic fighting and bending Electric cutting device Automatic and manual angles Automatic by 1000 programs with 16 angles Automation by PLC HMI Touch screen Multi security system Foot switches for 1 operator Longtherm support

Cream separator (Skimmer). Self cleaning. Machine is mounted on a stainless steel frame and comes with the bowl, motor (22 kW), motor cover, feet, CPM-valve for the pressure regulation, control panel (original Alfa Laval, SattCan05 Slimline), waterbox (original Alfa Laval), all inlet/outlet pipes and service tools including pressing tool for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 20.000 liter per hour, Bowl speed: 5.069 rpm, Motor: 22 kW - 380 V - 50 Hz, Weight: ± 1.700 kg, Dimensions: 240 x 225 x 215 cm

Capsule applicator and shrinker, make Enos, type Capsulatrice 1T., year 2015, for closing PVC capsules, with protective covering according to CE regulations, made of AISI 304 stainless steel,, Capacity: up to 2,500 bottles with PVC capsules,, up to 1,700 bottles for capsules made of aluminium, tinfoil, polyamine, This machine can be used for bottles of the formats:, Hmin= 230mm; Hmax= 370mm;, diameter min= 60mm; max= 110mm., Suitable shrink capsules should be made of PVC with dimensions:, Hmin= 35mm; Hmax= 70mm;, diameter min= 20mm; max= 40mm., The dimensions of the capsules used so far were:, H= 40mm; Diameter 32.5mm, The machine was used for the following bottle diameters:, 42mm; 52mm; 65mm and for a square bottle with LxW 45x45 mm., All moldings for these formats are for sale. Operating instructions are available., power: up to 2,500 bottles / hour, Dimensions / weight: L x W x H: app ...

Hoyer IE3 electric motor, Type HMC3 315S-4, Serial No.: SH707139, 50 Hz - 110 kW 400/690V, 60 Hz - 132 kW 480/830V, , = More information =, , General information, Type: Engine, Year of manufacture: 2022, Model year: 2022, Colour: Grey, Field of application: Internal logistics, Type number: SH707139, , Drivetrain, Type of fuel: Electric, , Condition, Technical condition: very good, Visual appearance: very good, Damages: none, , Additional information, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well ...

Submersible Pump, Multistage Submersible Centrifugal Pump, Centrifugal Pump LOWARA SVI1606/12S55T 1244186MXW Immersion depth: 530 mm pump foot: Ø 180 mm flange: Ø 250 mm Q: 9 - 23,6 m3/h H: 95.7 - 42 m Hmin.: 42 m connection: 2 ( inch ) engine: LOWARA Type LM132RB5/355 5.5 kW 2900 rpm 400 / 690 V 3AC 50 Hz 60 Hz - operation is possible ! New, with documents !; Dimensions (pump): 1060 x 300 x 300 mm Dimensions ( packaging ): 1250 x 370 x 400 mm

Year of construction 2022 - NEW; with Martin M10 mount, 420 kg net weight, suitable for 6 - 12 t excavators

Horizontal flow-wrapping machine Pearl Servo D6133 for packaging chocolates and chocolate bars Dataflex 6230; 32 mm (LH) incl. - TTO Ultra black - Print head cleaning kit - Rotary encoder kit - Counter pressure roller 750mm long - Shaft for counter pressure roller - Universal frame - Language Kit - Clarisoft Ergonomic design: HMI and start/stop buttons have been ergonomically situated to facilitate accessibility. High speed and versatility: Up-to 160 cycles/min. with 2UP and capable of wrapping endless diffrent products in the food and non-food sectors. No mechanical drives: Drive motors are connected directly to the various assemblies. The electrical panel is housed inside the machine frame and protected from the external environment. Compact design, easy cleaning: Thanks to the cantilevered construction and the use of polymer moulded components with graceful radiuses ...

Description: Top-maintained VENJAKOB Venspray adhesive spraying line with thread transport, spray system, nozzle dryer and airless pumps. Only samples, tests and product developments were processed on the system. , VENJAKOB Venspray with thread conveyor belt Machine no. A1411001-0020 Working width approx. 1600 mm Feed approx. 2,5 - 10 m/min Airless nozzles VENJAKOB jet dryer Machine no. A1411001-0030 Siemens Simatic HMI Touch Panel Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Glass Bottle Filling Block Wild Goose Meheen M6 - 2400 bph – 2015 Wild Goose glass bottle filling block for beer, cider, cocktails, carbonated and non-carbonated soft drinks, kombucha, wine and other beverages. The filling block consist of Meheen M6 counter pressure filler with six filling nozzles, crown cab sorter, rinser, bottle crapper plate for standard long neck glass bottles and a large hopper for crow cap feeding. This Meheen M6 filler block was manufactured in year 2014 and it has been filling totally approx 2 million bottles beer. Full maintenance done by UK based Oasthouse Enginering Ltd, Wild Goose authorised service company in 2021, and approx 40 000 bottles done after last maintenance. Meheen fillers are designed for specific type bottles only and this uses 330ml standard long neck bottles with 26mm crown cap. Wild Goose Meheen filling systems all processes are pneumati ...

Submersible pump, multistage submersible centrifugal pump, centrifugal pump LOWARA SVI202/18N03T/A 10737252TXW immersion depth: 510 mm pump foot: Ø 140 mm flange: Ø 180 mm Q: 1,2 - 4.2 m3/h H: 18.8 - 4.4 m hmin.: 7.4 m connection: 2 ( inch ) motor: LOWARA Type SM71RB14/304 0.37 kW 2900 rpm 230 / 400 V 3AC 50 Hz 60 Hz - operation is possible ! New, with documents !; Dimensions (pump): 815 x 210 x 180 mm Dimensions ( packaging ): 930 x 300 x 320 mm

Description: Top-maintained VENJAKOB Venspray coating systems with steel belt transport, 2 spray systems, IR dryer, airless pumps, smoothing roller, HILMER & KOCH hydraulic press and transport rollers. The system has a working width of approx. 1,600 mm and a Siemens Simatic HMI Touch Panel control. Only samples, tests and product developments were processed on the system. , Pos. 1 VENJAKOB roller conveyor angle transfer, manual removal station Pos. 2 VENJAKOB accumulation roller transport and control station Pos. 3 VENJAKOB IR preheating zone VEN DRY IR top/bottom Pos. 4 VENJAKOB spraying machine VENSPRAY with airless pump station Pos. 5 VENJAKOB IR dry zone VEN DRY IR above Pos. 6 VENJAKOB spraying machine VENSPRAY with airless pump station Pos. 7 VENJAKOB IR drying zone VEN DRY IR at the top and steel strip cleaning station Pos. 8 VENJAKOB angle transfer Pos. 9 VENJAKOB l ...

Description: control: ,SIEMENS SIEMATIC HMI after dep retrofit ,not used at production again Approx. Onsite Dimension. (l x w x h): 3,000 x 1,300 x 1,900 mm, weight approx.: 6,000 kg

Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operati ...

Centrifugal pump, single-stage LOWARA, IVT-PUMPEN GmbH FHS 50-250/185 101390980 Q: 36 - 90 m3/h H: 73 - 47 m Hmin: 47 m connection inner diameter: 70 / 48 mm Motor: AC-MOTOREN GmbH FCPA 160L-2/HE 18,5 KW 2940 rpm 400 / 690 V 3AC 50 Hz 60 Hz - operation is possible ! IP55 motor base: 305 x 305 mm hole spacing: 255 / 255 mm 4x Bore: Ø 15 mm pump material: Cast iron as good as new ! Dimensions (pump): 865 x 350 x 357 mm

Description: serial number: 76220 control: SIEMENS Sinumerik 840D HMI working hours: approx. 36527 hrs.  , travels: X-axis (grinding worm feed): ,195 mm Y-axis (shift feed): 160 mm Z-axis (grinding feed): 100 mm  , rotary and swivel axes: B-axis (grinding spindle): power: 10 kW max. rotational speed: 5555 rpm C1 and C2-axis (workpiece spindle): torque: 25/70 mm rotational speed: 0 - 1000 rpm C4-axis (turn dressing device): swivel angle: 30° max. rotational speed: 5 rpm  , auxiliary axes: A-axis (bevel angle adjustment): rotation angle: +/- 40° rotational speed: 28°/s C3-axis (turn turret): swivel angle: 225° rotational speed: 50 rpm  , rapid traverse: X-axis: 15 m/min. Y-axis: 5 m/min. Z-axis: 5 m/min  , workpiece diameter: 10 - 145 mm number of teeth: 5 - 150 max. shaft length: 350 mm module rang ...