hm daenemark used for sale

Electronic Module, MI Bus Module ANYBUS, HMS AB4005-C 3261-2.0.1 M00424 used, tested ! Dimensions: 86 x 62 x 21 mm

Magnetic Drive Centrifugal Pump, Chemical Pump, Centrifugal Pump, Water Pump SONDERMANN PUMPEN + FILTER GmbH & Co. KG RMPP24/320/90 Qmax.: 320 l/min Hmax.: 2,4 bar input: Ø 50 mm ( inner ) output: Ø 30 mm ( inner ) Material: PP Motor: AEG Type: E AM 80 FX2 1,1 kW 2835 rpm 220 / 380 V 3AC, 50 Hz used, tested ! Dimensions: 480 x 205 x 240 mm

Silverson MP45 Mayonnaise plant Serial: MP45107 2013 but fully overhauled by PPML in 2021, stainless, mayonnaise and sauce plant, Silverson sauce plant is designed for small to medium pilot scale production of sauce, the unit is designed to carry out the entire process, including rapid preparation of pre-mixes, hydration of thickening and stabilising agents and preparation of the final oil in water emulsion, HMI touch screen controls with programmable settings, Silverson high shear in line mixer model 450LS, 7.5Kw motor, with manuals / drawings, mobile, 3Ph

ABG B5010 / Booklet machine  Configuration of the machine:  Unwinder  New feeder system  Lamination in register  Punching station  Matrix rewinder with silencer  Rotating shear blades  WebAdvance on the rewinder  This machine has been completely upgraded in terms of control technology, i.e. new drives, new HMI and new software, so that it meets today's standards from a control technology point of view.  It also has the latest version of the feeder.  The original delivery date was LabelExpo 2013, but with the full upgrade it is now state of the art.

Blister packaging line, consisting of: Thermoforming blister machine Mediseal CP 400 and folding box cartoning machine Mediseal P 3000, incl. new PLC, operator terminal (HMI) and servocontroller: Thermoforming blister machine CP 400: • Set up for PVC/ALU film (conversion to ALU/ALU possible at extra cost) • Output thermoforming station max. 50-60 cycles/min depending on blister format • Output punching station max. 400 blisters/min depending on blister format • Foil width max. 160 mm • Roll diam. max. 500 mm, core diam. 70-76 mm • 2 roll holders for thermoforming film with film spreader and gluing device for roll change during operation • Pull-off length in thermoforming range 140-220 mm • Drawing depth PVC max. 12 mm • Drawing depth ALU max. 9.5 mm • Feeding: directional tablet feed with spiral conveyor and alternatively brush box (without format parts) ...

Blister packaging line consisting of: Thermoforming blister machine Uhlmann UPS 1030 MTI and folding carton packaging machine Uhlmann C 2205. Major service 2014 by the manufacturer. Thermoforming blister machine UPS 1030 MTI (multi-cycle intermittend): • Set up for ALU/PVC-PVDC-PP aclar operation / Alu/Alu cold forming prepared • Output punch max. 210 cycles/min • Output max. 600 blisters/min • Feed rate max. 144 mm • Blister width max. 255 mm • Drawing depth max. 10 mm • Roller stand • Dedicated feeder (standard feed channel vertical) for tablet / capsules • Sealing roller and preferential roller cooled • Product inspection with CCD colour camera VisioChrom retrofitted in 2014 • Compact station with embossing, perforation, die-cutter • Reject station for partially filled/empty • Transfer conveyor to cartoner • Control Beckhoff IPC with HMI  ...

Friction feeder: • For inserting brochures/booklets etc. • Speed max. 240 m/min • Product width max. 90 mm • Speed infinitely variable • Code reading Laetus with camera wt880 and bad ejection • HMI touch screen Turret magazine: • 16 stacking slots for product W x L 53 x 100 mm, stacking height 440 mm • Output range stacking height up to 2m/min, single up to max. 200 products/min • Product quality min. 80 g/m² (paper) • Positioning accuracy +/- 1 mm • HMI touch screen • Drive 230V/50Hz

• Non-EX version • Drum fully perforated with mixing paddles • Drum useful volume 331 litres, drum diam. 1,450 mm, opening diam. 550 mm • Batch size 79-265 kg (filling volume 30-100%, density 0.8 kg/dm3) • Volume flow 2,000-4,500 m3/h • 6 spray nozzles with peristaltic pump, spray rate 250-1050 g/min, • Drum drive Motor power 1.5 kW, speed 1.5-13 rpm • Antifreeze heater 68.1 kW • Dehumidification in 2 stages, cooling capacity 75.2 kW, aftercooler 24.3 kW, residual moisture at outlet 2 g/kg • Humidification Preheater heating capacity 53 kW • Main heater Heating capacity 140 kW, air temperature at outlet +90° C • Supply air fan max. volume flow 4,500 m3/h, motor power 7.5 kW • Supply air filter 3 stages M6, F9, H13 • Exhaust air fan max. volumetric flow 4,500 m3/h, motor power 22 kW • Exhaust air filter H13 • Cleaning nozzles Drum outside 2 x ...

Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, HMI panel, hand-held terminal -Manufacturer: Andras, control panel hand terminal -Type: T-H3LVGA-M7 #0603LV322-U -Total dimensions: 500/460/H110 mm -Weight: 4.8 kg

Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system -2 punching -Punch movable: 215 - 2505 mm -for: small punching work -Foot switch -Dimensions: 3010/930/H1450 mm -Weight: 570 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 200 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Dimension: Ø 27 x 333 mm -Weight: 0.3 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 125 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 30 x 270 mm -Weight: 0.4 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, short-stroke cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 30 x 192 mm -Weight: 0.3 kg/piece

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 250 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Dimension: Ø 30 x 393 mm -Weight: 0.5 kg

Radial piston motor, hydraulic motor, oil motor, hydraulic pump -Drive shaft: Ø 34 mm -Flange: Ø 180 mm -universally applicable: -Number: 1x motors available -Price: per piece -Dimensions: Ø 205/258 mm -Weight: 23 kg/piece

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: ELCO -Type: HMC-1B 5V10A -Number: 1x control cards available -Price: per piece -Dimensions: 250/135/H60 mm -Weight: 1.3 kg

Magnetic Drive Centrifugal Pump, Chemical Pump, Centrifugal Pump, Water Pump SCHMITT CENTRIFUGAL PUMPS MPN 115 Qmax.: 130 l/min Hmax.: 10 m / Input: Ø 16 mm ( Inner ), Thread: 1 ( inch ) Output: Ø 16 mm ( Inner ), Thread: 1 ( inch ) Material: PVDF Motor: RICHARD HALM Type: D63A2 0,25 kW 2770 rpm 220 / 380 V 3AC, 50 Hz used, tested ! Dimensions: 335 x 165 x 135 mm

Magnetic Drive Centrifugal Pump, Chemical Pump, Centrifugal Pump, Water Pump SAGER & MACK VERTRIEBS- GmbH M-40-32-82-15 Qmax.: 133 l/min Hmax.: 6 m input: Ø 32 mm ( inner ), Thread: 2 ( inch ) output: Ø 25 mm ( inner ), Thread: 11/2 ( inch ) Motor: EMOD Type: FK71S/2 0,37 kW 2790 rpm 230 / 400 V 3AC, 50 Hz IP54 used, tested ! Dimensions: 395 x 140 x 200 mm

Dimensions: Length - ~ 2.3 m Width - ~ 1.5 m Height - ~ 1.8m Weight - 2500 kg Spindle motor - 4.0kW Hydraulic pump motor - 0.25kW Coolant pump motor - 0.15kW Supply voltage 400V 50Hz 24V DC control voltage X / Y / Z axis motors - direct current INDRAMAT Table - 800 / 400mm Control: PLC Siemens S7-1200 + HMI 7 + Measurement with a ruler (0.005 mm) Automatic and manual mode (Automatic mode has 25 lines) Simple service and diagnostic page Electric spindle speed adjustment - stepwise Central lubrication HMI Menu: Polish / English / German

800t clamping force Battenfeld machine, year 2008 The machine was used for a project in the auto industry but the last months there is no work for this machine. Clamping force 800.0 T Screw diameter 85.0 Tie bar spacing (H) 1120.0 Tie bar spacing (V) 1020.0 Shot volume 2412.0 Shot weight 2195.0 Pressure on material 2110.0 bar Platen length 1620.0 Platen width 1530.0 Robot interface E67 Number of cores 4.0 Number of heating zones

TECNOSALD 1600 welder Year of manufacture: 2007 Weight: about 5500 kg Working width 1600 mm Installed power 30 kW New control - HMI panel, PLC controller and Mitsubishi inverters Perforating knife Photocell Antistatic device Double decoiler 3m long table with automatic bag removal Film parameters: Thickness: Min: 0.018 Max 0.100mm x 4 Length up to 3000 mm Number of ticks per minute: Foil up to 0.030 up to a length of 700 mm 50-60 Film above 0.030 mm 15-18

Machine Speed : 2500 pots per hour (depending on container specification and product viscosity) Fill Range Main fill, pre-fill and post-fill filling systems 70 to 568cc each Dosing Range : Small dosing 0 to 100cc each Pot Diameter : Maximum 125mm Pot Height : Maximum 125mm Power Supply : 380-415V / 3 Phase / 50-60Hz + Earth + Neutral Air Supply : 6 Bar at 150L/min NovaPak D2500 is a flexible, compact, automatic rotary filling and sealing machine, fully enclosed using minimum floor space. It can cater for various size and shape of container and offers a machine mounted container dispenser unit and location system to accurately control container stacks. A detection system is integrated as standard to offer ‘no-container; no-operation’ facility The machine includes a filling system (manufactured from 316 grade stainless steel) complete with product tank. Interchangeabl ...

workpiece dia.: 100 mm module: 3.0 mm fixture slide travel: 400 mm Control: Siemens - Sinumerik 840 D max. milling cutter diameter: 80 mm cutter length max.: 180 mm turning speed range: 50 - 12.000 U/min table turning speeds: 3.000 U/min Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P90 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached extraction system: Ringler, - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle - AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - Workspace, - tailstock, - measuring device, - refrigeration system, - Industrial robots: Epson, - goods carrier, - conveyor belts, - control panel, The machine is in very goo ...

MachineApplications: manufacture of paving, kerbs, concrete blocks for masonry, foundation, pillars, floor slabs, chimney stacks, gutters, roadway gutter covers. 1 Advantage: Powerful vibration provided by 2 electric motors Tamper head equipped with 2 vibration motorsSchneider Electric electrical control and command components Our wide range of moulds can ensure a diversified production. Reliable mechanical and hydraulic systems. Component parts from trusted pateners: Drive: electrical and hydraulic Operate: Mostly manual (commands executed automatically: stop vibration when reaching height, start/ stop exhaust line) Concrete mould supply: Mechanised with hydraulic control Optional equipment: ) Auxiliary equipment for the paving and kerb finishing (hopper and drawer) Production cycle automation Electrical panel with PLC + HMI + software Automatic elevator with product panels f ...

Rommelag Bottlepack 3012 Blow-Fill-Seal Machine (BFS) with moulds for nasal & eye drop bottles 5 ml. & 10 ml., 7-cavities (7x5 ml. & 7x10ml.), capacity up to 3.000 bottles per hour, includes granulate vacuum feeding system, cooling wáter recirculation sytem and miscellaneous spare parts, new Siemens touch screen control panel (HMI) in 2015.

SMI SK300F shrink packing machine manufacturing year 2006 capacity 30 packs/minute Machine drive: SMI optical fibre & Cosmos variator + HMI posic. Equipped with infeed & outfeed conveyors In very good condition Supplied with all spare parts for machine revision & original SMI new parts To be dismantled on site Available immediately

Romaco-Siebler HM1/160 vertical strip packing machine for tablets, 3 lanes, maximum foil width 170 mm, includes format parts for tablets with dimensions of 7.2 x 5.6 x 17.5 mm and 11.4 x 6.31/WR8.5, foil reel core diameter 76 mm, maximum foil reel diameter 450 mm, Siemens SIMATIC S7-300, excellent working condition with only approx. 1600 running hours

Labelling Machine GERNEP Labetta 7500 bph Fully automatic cold glue labelling machine for glass bottles and jars from the first owner, machine made by German Gernep in 2013 and having only 9512 operating hours as a labeller. This labeller has three cold glue label magazines for pre-cut paper labels (neck, front and back, now preserved in storage and a part of delivery scope). It covers all traditional equipment requirements of containers made from glass and PET. The combination of well-tried technologies such as stainless steel glue roller, rubberised and adjustable glue palettes, divided glue scraper knife with glue-saving fine adjustment of the glue thickness, overlay gearbox for exact label positioning. Labeller has been maintained well and last full overhaul (EUR 19’500) was made in the end of 2019. All air driven glue pumps are changed to electric drive pumps and it has stainles ...

• For hard gelatine capsules • Output max. 120,000 capsules/h • Available formats for capsule sizes 00, 0, 0el, 1, 2, 4 • Available dosing rings for pellets/microfilm tablets and dosing station for powder/granules • Deionisation for static powders • Sample weight control by Sartorios balance, automatic operation, with control via PLC for MG2 dosing, regularly calibrated • Capsule hopper • Empty capsule sorting with lifting device for deformed capsules • Tricaps finished capsule sorting machine for deformed capsules • Bulk suction and powder feed via Volkmann vacuum devices with various suction lances for different products • Separate suction unit with side channel blowers • Only H1 and FDA lubricants from Klüber • Regular maintenance by MG2 and own personnel (monthly, ¼ yearly, yearly, by the hour) • Complete spare parts package for 4,000 h maintenance availa ...

workpiece dia.: 80 mm module: 2,5 mm fixture slide travel: 220 mm Control: Siemens - Sinumerik 840 D max. milling cutter diameter: 100 mm cutter length max.: 160 mm turning speed range: 200 - 5.000 U/min table turning speeds: 3.000 U/min Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached exhaust system for dry processing: Ringler, - Noise insulation for dry milling machine - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - coolant device, - Automation unit: AMZ, The machine is in very good condition. For additional equipment information p ...

SPX Bactofuge for Milk Make : SPX Model : SE 355 BX -03 P2 Capacity : 10,000 Litres per hour Y.o.m : 2014 Skid mounted Condition : Very Good Included : Tools , Manual book, control panel HMI touch screen

Flat conveyor belt on aluminium substructure Length of the strap 560 cm, width of the strap 65 cm By regulating the height of the angle of inclination Conveyor belt mobile, on wheels Price: On request

Groninger plastic bottle filling & closing line for eye drops (Ophthalmic), etc. comprising ZVB 2650 fully automatic empty bottle sorting & feeding unit and DSVG 4132 fully automatic intermittent motion filling, stopper and capping machine with barrier system with laminar flow modules type ORABS with LF Units, working stations: 1. IPC Tara – 2. gassing during filling – 3. 4 filling heads (multi stage filling) with servo controlled peristaltic pumps, filling accuracy +/-0,5 % referred to volumes above 1 ml. and +/-1,0 % referred to volumes below 1 ml. – 4. IPC gross – 5. post-gassing – 6. 2-head dropper inserting station – 7. 2-head screw capping station – 8. Bottle discharge, Allen Bradly Control Logix PLC + Allen Bradley Panel View Plus 6 / 1500 HMI, includes format parts for bottles for 3 ml. (Ø 18,70 x H 28,20 mm) and 10 ml. (Ø 25,00 x H 43,65 mm), capacity up to 120 b ...

ID2652 Putzmeister HM25 AZ 24/100 year approx. 1995 approx. 1210 hours/hours Mobile Concrete pump Putzmeister HM25 AZ 24/100 on tracks (25 t Atlas undercarriage), approx. 24 m boom, radio remote control, wired remote control, approx. 60 -70 cbm pump capacity, Iveco/Fiat 6 cylinder suction engine Mobile concrete pump Putzmeister HM25 AZ 24/100 on tracked suspension (25 t Atlas undercarriage), approx. 24 m design, radio remote control, wired remote control, approx. 60 -70 cbm pumping capacity, Iveco/Fiat 6 cylinder naturally aspirated engine

Chisel hammer, chisel hammer, electric hammer, demolition hammer MAKITA HM 1100 C ( HM1100C ) 1.05 KW 1300 - 2650 blows / min 230 V 1AC 50 / 60 Hz approx. 6.0 m Connection cable used, tested ! dimensions (without cable): 530 x 230 x 200 mm

CARTER CNC 4.2 M double mitre saw built in 2021 is ideal for high-volume production that requires precise cutting of workpieces with a maximum length of 4200 mm. The machining of workpieces at 90° and 45° is performed with the utmost precision and accuracy using high-quality discs driven by powerful electric motors. The machine has been used very little to date – it has only been in operation for 1 hour a day. Technical specifications of the CARTER CNC 4.2 M sawing machine - controller: SIEMENS - machinable materials: aluminium, PVC - maximum workpiece length: 4200 mm (possibility to cut oversized workpieces with a length of 7 m) - cutting angle: 45°; 90° - HMI panel: SIEMENS SMART LINE TOUCH - power supply: 380 V; 50 Hz - dimensions of the machine (L x W x H): 4600 x 900 x 1600 mm

Electronic handwheel, Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, HMI panel, hand terminal, hand control panel -Manufacturer: Mikron, hand terminal control panel from CNC milling machine Mikron UME 600 -Connection plug: see photos -Transport dimensions: 400/240/H95 mm -Weight: 1.1kg

Used Automatic Depalletizer brand Berchi model Dynamics DS with plc Siemens s12 Berchi Used Depalletizer with automatic feeding has all the necessary safety features to carry out the production in safety for all the operators of the bottling line The loading roller conveyors for full pallets can contain up to a maximum of 3 pallets Both the mechanical and PLC components of the Berchi Used Depalletizer have been reworked This supply of the Used automatic Depalletizer does not include the bottle unloading and alignment table And it must be developed and structured on the basis of the bottle formats that the customer decides to produce How does this used Berchi depalletizer work The method used by Berchi as Used depalletizer is transferred by sliding so then allows you to work with bottles of different types and materials glass PET etc This without making adjustments thus allowing immediate ...

Used Blow Molding Machine Sidel 1992 Manufacturer SIDEL Model SBO2 Year 1992 Speed b h 3000 Processed formats 0 25ml 2 liter Accident prevention protections Yes Manuals available Yes Revisions available Yes Operating status In production Number of cavities 2 Preform neck type Preform 1881 weight 9000kg Quick format change Yes Preform loader Yes Preform orientator Yes Compressor No Chiller No Air recovery system No PLC type Mitsubishi Spare parts available Yes Hours worked 2000 Consumption Volt 360 Kw 40 Hz 100 Notes Machine working stabile suitable to be connect with filler machine The machine has been completely updated hmi electronics and new plc [...for more information send your inquiry to the seller.] refno: SO96

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, cyclone, motor (18,5 kW), motor cover, base plate, feet, CPM-valve for the pressure regulation, control panel (original Alfa Laval) and service tools for maintenance including pressing tool., Excluding:, - Waterbox, Type of Machine: Cream Separator / Skimmer, Capacity: 15.000 liter per hour, Motor: 18,5 kW - 380 V - 50 Hz - 1470 rpm - 36 Amp - 3 Ph, Dimensions: 200 x 105 x 175 cm, Weight: ± 1.500 kg

01 Product to be filled CSD 02 Type of Bottle RoundBottles 03 M O C of the Bottle PET Bottles 04 Fill Volume Bottle sizes 500ml 05 Type of Caps Screw Caps 06 Type of Labels BOPP 07 Output required 416 Bottles Per Minute on 500 ml BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION Used blow molding machine for PET bottles with production capacity up to 25 000 bph with the 500ml format Year of construction 2007 Used blower complete with Octagon tipper Air recovery system preform hopper This machine is immediately available for sale and in case of request we can carry out pre production maintenance Detached from production in fully functional status is excellent opportunity for used equipment We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request Air conveyor system NEW used revised 2024 NEW RINSER FILLER SCREW CAPPER SPORT CAPPE ...

Used Filling Monoblock Simonazzi Azzurra 120 48000 bph Used filling monoblock Simonazzi Azzurra 120 for glass bottles with maximum capacity up to 48 000 BPH current size 200ml Suitable for CSD products The used Simonazzi triblock glass is composed by Rinser 2002 SIG Simonazzi BLOKRINSER Filler 1987 Sarcmi Azzurra 120 24 update in 2002 Capper Krones Twist off 2011 Type of transfer Transfer star wheels Capper Brand Krones Twist Off Machine Pitch mm 110 mm Max container height 200 mm Used Filling Monoblock Simonazzi Azzurra condition now as it is or is possibly overhauled and guaranteed Warranty of the used Simonazzi triblock glass 6 months in case of revision option to be quoted separately Worktop height 1200 mm Pressure 7 Bar PLC Siemens Simatic HMI Siemens Simatic TP27 Complete of CIP Premix CO2 checker Used Filling triblock This used filling monoblock Simonazzi Azzurra 120 has an impres ...

Used Shrink Wrapper SMI SK 450T 45 ppm tray If you re in the market for a top tier shrink wrapping solution look no further than the SMI SK 450T This machine crafted by the renowned brand SMI in 2001 represents a pinnacle of engineering and design catering to your packaging needs with precision and reliability Machine Specifications Machine Type Shrinkwrapper Brand SMI Model SK 450T Year of Construction 2001 Max Speed 45 packs per minute ppm Container Material Glass Max Container Height 340 mm Package Type Film Tray Number of Slopes 6 Max Reel Size 500 mm Number of Reels 2 Operator Side Right Condition As It Is Warranty 6 Months Enhanced Efficiency and Versatility The SMI SK 450T is engineered to elevate your packaging operations with its remarkable speed of up to 45 packs per minute Its compatibility with glass containers and film trays ensures a sleek and professional presentation for  ...

Used Shrink Wrapper SMI LSK 30P year 2004 Welcome to the world of high quality packaging solutions with the SMI Shrinkwrapper LSK 30P from the year 2004 This advanced packaging marvel proudly presented by the renowned brand SMI is your gateway to efficient and impeccable packaging Key Features Designed to meet your packaging needs with precision the SMI LSK 30P boasts an impressive array of features Model and Performance This shrinkwrapper is the LSK 30P model offering a remarkable maximum speed of 30 packages per minute ppm Its consistent and reliable performance ensures your production line runs smoothly Container Compatibility Perfect for 750 ml packages the machine accommodates PET materials ensuring both durability and visual appeal It supports a maximum container height of 350 mm allowing you to package various products effortlessly Package Type The machine excels in using a film l ...

New PET filling monoblock for CSD up to 10000 bph System Overview The Unibloc 40 40 10 model by UBL SRL is an integrated bottling system designed to operate with a maximum capacity of 10000 BPH Its architecture combines three main functions rinsing filling and closing in a single monobloc Rotary Rinse in the New filling monoblock for CSD The rinsing section includes 40 heads configured to process PET bottles The design allows for effective and rapid washing essential for maintaining hygiene standards Counterpressure Filling The filling module uses 40 isobaric valves to ensure uniform and precise filling The isobaric system is particularly advantageous for carbonated drinks such as soft drinks and sparkling water minimizing the loss of CO2 during filling Screw Closure The sealing section is equipped with 10 rotary heads for applying plastic screw caps This mechanism ensures reliable and c ...

Groninger KVK-F5 fully automatic 6-head crimping machine including DTE 1000 infeed turntable (Ø900 mm), object diameter 14,00 – 68,00 mm, object height 34,00 – 145,00 mm, aluminium crimp cap diameter 13,00 – 32, 00 mm, power consumption 6,5 KVA, compressed air 6 bar, height of object transport 900 mm +/- 15mm, HMI 18,5 inch Omron-TFT-FullHD-16:9 Display / Multitouch Touchscreen / Industrial PC with Windows 10 lo T, integrated recipe management with space for 200 recipes, Audit Trail, Siemens SIMATIC S7, required floor space including infeed turntable approx. 4456 x 2432 mm (LxW), capacity up to 6,000 vials per hour, includes format parts for 2R ISO Vials (Ø16,00 x H35,00 mm) and Flipp-off-caps (Ø13,30 x H7,70 mm)

WJATECH WJA D096P A MA screen printing conveyor dryer built in Poland in 2020 is dedicated to the advertising industry, where efficient drying of prints on fabrics or textiles is required. Fast achievement of the right temperature and a conveyor belt with a large working space make the WJATECH screen printing dryer the best solution in this field. Technical specifications of the WJATECH WJA D096P A MA screen printing conveyor dryer - HMI panel: WEINTEK - main switch - power: 64 kW - working pressure: 6 bar - power supply: 3×400 VAC; 50 Hz - dimensions (L x W x H): 4500 x 2200 x 1700 mm - weight of machine: 900 kg

Overview The shrink wrapper was built in 2006 by Italian manufacturer SMI. The machine is in a very good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 30 packs per minute Specs: Double lane for 0.25 & 0.50L Single lane for 1.0 & 1.5L Packing:                                  film only 0.25L packs in 3x3 & 3x4 double lane 0.50L packs in 3x2 double lane 1.0L & 1.5L in 3x2 single lane in neutral or printed oriented film Machine drive: SMI optical fibre & Cosmos variator + HMI posic. Marts 3000 and Cosmos 2000 drive Machine equipped with infeed & outfeed conveyors Supplied with all spare parts for machine revision & original SMI new parts

Key data: 30 t, 1250 mm, 1010 mm

SPECIAL MODEL: The butt flap is equipped with 2 additional stop fingers as standard / • Stress-relieved welded steel construction •Upper beam with torsion shaft •NC control with touchscreen HMI • Back gauge with X and R axes •European Style Upper Tool

Allweiler NB65-160U3.20DW135 centrifugal pump 8.7 kW Allweiler NB65-160U3.20DW135 Centrifugal pump Q= 86.0 m³/H H: 32.0 m 8.7 kW 2900 1/min YEAR. 2017 Hoyer electric motor HMC3 160M 2-2 More centrifugal pumps new and used - you can find them in our shop! International shipping costs on request!