We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,292 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
3 GEA Twinstar film roll holders, film width: maximum 460 mm, total dimensions: (3x) 270 mm x 600 mm x 150 mm.
used
GEA display, display dimensions: 225 mm x 70 mm x 170 mm, box dimensions: 320 mm x 300 mm x 250 mm.
used
5 GEA knife holders for GEA CFS powerpack, dimensions: (5x) 530 mm x 550 mm.
used
GEA cooling plate for thermoformer, 5 dyes, dimensions dye: (5x) 272 mm x 175 mm, total dimensions: 1060 mm x 365 mm.
used
Pökelmaschinen Ges.m.b.H/Inject Star mobile ham press, type: FWP-I-21, number: FWP21-364, year of construction: 2005, air pressure: 4-12 bar, dimensions: 1900 mm x 600 mm x 1720 mm.
used
Gebr. Remie B.V. tumbler, type: GRM 951, year of construction: 1998, dimensions: 3510 mm x 1600 mm x 2180 mm.Â
used
GEA grill marker, type: GRM 622, machine number: 115, year of construction: 2012, 400 V, 3 Ph, 50 Hz, 41 A, 28 kW, weight: 650 kg, s/s mesh belt, belt width: 600 mm, total dimensions: 1800 mm x 1700 mm x 1950 mm. Lot located in Goes, the Netherlands. Viewing and pick-up in consultation with Industrial Auctions BV.
used
Gernal double s/s cooking vessel, type: KKS, number: 746, year of construction: 1986, 220 V, inside dimensions: (2x) 1200 mm x 880 mm x 700 mm, total dimensions: 2800 mm x 1400 mm x 1100 mm.
used
Gelmini automatic portioning machine, model: SPG- 00/1000, serial number: 1179, year of construction: 2001, 3 lanes, width: 80 mm, maximum length product: 1000 mm, maximum ø product: 95 mm, total dimensions: 2850 mm x 900 mm x 1820 mm.
new
Large stock of punching material (dies/stamps), spare parts
used
honing diameter:90 mm stroke:600 mm ConRod
used
loading : 75 to 80 % double jacket suitable for cooling or heating up to 75°C with mixing arm all stainless steel tiltable drum outside dimensions (l x w x h) : ± 2.400 x 1.100 x 2.000 mm 3kW PLC control yoc 2017
used
Pneumatic pressure: 6bar, connected load: 26.92kW, weight: 400kg, with documentation.
used
Weight: 1.05t, with documentation, an inspection is possible.
used
Working length: 4000mm, pressing force: 3000kN, distance between the columns: 3550mm, table width: 500mm, installation height: 460mm, connected load: 30kW, weight: 30t, with accessories and documentation.
used
Pressure capacity: 85t/850kN, ram stroke: 30-110mm, ram adjustability: 50mm. Documentation available.
used
Max. spindle rotational speed: 1430/min, spindle power: 1.5kW, connected load: 14kW, including documentation.
used
Output: 8000 bottles/h, format: Euro 0.5l/ NRW 0.5l/ Bavaria 0.5l/ Longneck 0.33l, with two aggregates for front and back.
used
Number of stations: 2, format: 10l VdF, 0,7l VdF, 0,2l enlarged-neck bottle.
used
There are four Wrapping Machines H&S available, year of construction: 1x 1984, 1x 1986, 2x 1995.
used
Max. output: 10,800 cups/min, cup format: 2x3, with documentation, film transport, main filler, laminar air over the entire filling line, laminar tunnel from the moulded part to the film lift with laminar box, die cutter with spare die cutter, packer, Mettler-Toledo weighbridge, outfeed and high stacker, regularly overhauled.
used
With conveyor belt, blower, shredder, screw, drum and screen.
used
There are two identical Cheese Making Machines APV available, capacity: 12,000l, length: 3850mm, width: 2800mm, height: 3400mm, with platform.
used
Servo Drive AEG Gettys A241-1 tested used part
used
Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.
used
Max. speed: 4500/min, with control cabinet, the machine is defective and can be considered as a spare parts donor, there is corrosion on the drum base in the threaded area, the drum cover support surface for the locking ring and on individual plates.
Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.
10 Cummins 1 MW, containerized, 2021 new, 0 hours, $238,000 each 7 Caterpillars 1.6 MW, containerized, 2012, some hours average 16,000, $247,000 each stock of 15 small chinese Diesel fired Gensets, 100 - 300 kW, brand new, 0 hours, alltogether 2.41 MW el, $345,000 all. All subject to prior sale.
used
There are two turbo compressors available, output machine 1/ 2: 8000/ 13,500 Nm³/h, with compressor, oil container and controls.
10 Cummins 1 MW, containerized, 2021 new, 0 hours, $238,000 each 7 Caterpillars 1.6 MW, containerized, 2012, some hours average 16,000, $247,000 each stock of 15 small chinese Diesel fired Gensets, 100 - 300 kW, brand new, 0 hours, alltogether 2.41 MW el, $345,000 all. All subject to prior sale.
used
Supply/exhaust air volume flow: 6500m³/h, total supply/exhaust air pressure: 992/881Pa, heating capacity: 48kW, cooling capacity: 22.6kW, connected load: 8.1kVA, with Hygromatik FLE80-T steam humidifier, pipework, control cabinet, AERMEC WLR 101° water-cooled chiller, condenser, frequency converter, other elements and documentation, on-site inspection is possible.
used
Flash pasteurising to stabilise beverage quality. The product is heated via a plate heat exchanger and held at pasteurising temperature for a defined amount of time, after which it is then cooled down again., Capacity: 350 hl/h, Operation / Control: Excluding control cabinet with software. Software can be delivered by agreement, Features: 1x plate heat exchanger, 1 tube heat exchanger, 1x hot water pump, 2x beer pump , Code: 11625
used
Permissible pressure: 16 bar , Permissible temperature: 100 °C, Code: 5247
used
Capacity range: 600 l/h, Pressure: 250 bar, Cellular particle size: 1 μm cellular particle, Length: ca. 2,2 m, Width: ca. 2,5 m, Height: ca. 1,9 m, Variety / Product: Hops; can also be used for milk if extended to 2 levels., Operation / Control: Was integrated in a ProLeit process control, the motor was controlled by an external frequency converter. Frequency converter can be added., Features: CIP-able, SIP-able , Code: 1389
used
Additional title: Dealcoholisation equipment, Capacity: 1 hl/h, Alcohol removal: 0 %-vol membran area: 19,5 qm, PH: 5, Pressure: 50 bar, Variety / Product: Beer, Features: feed pump, tube bundle recuperator, Pre filter, tube insulating diaphragm, high pressure piston pump, control cabinet, installed electric power 12,5 kW, 4 hl/h possible with extension of the modules , Code: 890
used
Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg.
used
labeller GENERP | 10-640 3SK Year: 2008 Speed: 9.000 bph Direction: Clockwise 10 heads 3 adhesive stations Safety protections
used
Capacity: 1750l, max. operating temperature: 150°C, max. operating overpressure: 3.9bar, height: 2651mm, with extensive documentation, on-site inspection is possible.
used
There are two identical storage tanks available, diameter: 1500mm, height: 2500mm.
used
There are three identical storage tanks available, width: 700mm, height: 3600mm.
used
Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Good
used
X-axis: 1000mm, y-axis: 1500mm, z-axis: 800mm, table dimensions: 1100x1200mm, connected load: 4kVA, control: Pantec pro, length: 3260mm, width: 2030mm, height: 3500mm, weight: 6.6t, operating hours: approx. 16,000h, the machine received new glass scales and a control in 2014, has been regularly serviced, with Renishaw measuring head and documentation, without accessories, can be inspected on site.
used
Max. Operating pressure: 20 bar, max. temperature range: 120°C.
used
Load: 300kg, compressed air supply: 5bar, weight: 470kg.
used
Max. load: 227kg, operational hours counter: 979h, with documentation, the machine has not been used for 2.5 years, the slewing ring makes noise when extended, the brakes are difficult to control, brakes somewhat abruptly, the batteries were renewed a few years ago, an on-site inspection is possible.
used
with CNC X amp; Y positioning table for punchstation equipped with 3 punching units which can be selected with the CNC control Fagor Electric backgauge for flat shear Punching cap: 100 ton Dia x sheet thickness: 31 x 26 mm / dia 100 x 8 mm 28 strokes/min Depth of throat: 610 mm Max hole dia: Ø 100 mm Max cutting-thickness in plate: 600 x 15 mm /nbsp;400 x 20 mm Blade length: 605 mm 90°-cut corner: 152 x 152 x 13 mm 45°-cut corner: 70 x 70 x 7 mm Cut to length round/square: 50 mm Max material thickness by notching: 90 x 52 x 13 mm Power: 9 kW Weight: 3,3 ton
used
Geppert Band AM-F 7,30m x 0,30m with drive The plastic modular belt AM-F is characterized by its slim design. Thus, the width of the frame is only 14mm more than the chain. At the linkage it is also only 40mm more. The frame including the chain is 95mm high. The modular plastic chains of the AM-F are easy to clean, particularly hard-wearing and easy to maintain by replacing individual links. Specifications: Year of construction: 2012 Length: 7,30m Width: 0,30m Height: 1,00m Drive: 220/240V 1pH Complete plant closure, wide range of mezzanine floors, pallet racks, shelving racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines More items - new and used - can be found in our shop! International shipping costs on request!
used
Bottle washer GERA mod. Arcade DS02 Speed: 9.500 bph. Year: 1993. 12 Ranks. PLC Siemens S5. Machine completely in
new
capacity: Ø 10 - 75 mm sawing motor: 11 kW hydraulic motor: 3 kW Saw Feeding Servo: 1,5 KW Siemens Material Feeding Motor: 1,5 KW Siemens Saw speed: 70-160 rpm /min saw-blade dia.: Ø285 x 2,0 x 1,7 x 32 mm cutting range min.: 1000 mm cutting range max.: 7000 mm control: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2950x6800 m weight of the machine ca.: 3500 kg GERD WOLFF GLS-75 #High-performance circular saw From 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
charge load: / : / weight: 720 kg diameter: 1360 mm height: 1200 mm 0: 520 l – For different processes with different dimension stone types in the same machine – Usually for large-sized and sensitive parts – Various volumes in the range of 20lt – 1250lt – Without seperating system – Deburring and polishing for all kinds of metal and non-metal materials – Suitable for automation system – Optional accessories ZCV Series machines are used for deburring, polishing, roughness removal, oil and rust removal, descaling, colour changing, delustering, aging etc processes for metal or non-metal materials. The machines in this series are generally suitable for big size and sensitive parts, and the processed parts are collected manually by the staff at the end of the process. The bowl design is one of the important factors to achieve the desired surface quality in th ...