gas vacuum used for sale

Water-cooled pulse - inert gas welder Manufacturer Artec Type Topweld Pulse 5500 Inert gas welding gun MIG-MAG Make: ARTEC Model: Puls 5500 specifications: Welding current range up to 550 A water cooling separate feed frame type DV-W1 with 4-roll wire feed Hose package Feed case Ground cable Device under power ready to be demonstrated! Special price!

Mobile compressor for the evacuation of natural gas from pipelines for maintenance and repair to offer. There are only few trucks of this worldwide. This truck is fully operational and used to be operated only by Gas Industryi n the past! For first details please refer to attached file. The truck is located in the north of Germany (between Bremen and Hanover). A visit is possible by appointment. Further details can be provided on request. - The machine has been completly refurbished in 2022 (documentation/ certification available -> see attached picture) - The truck/ machine is fully operational - Reason for replacement was the truck/ car body ( wanted to have a modern truck – nothing to do with compressor) - Current replacement price of compressor: around 4 Million EUR – delivery time around 36-40 months - Optionally we could provide an engineer from Gas Industry for machine  ...

Key data: 1451 , 1487 , 400

2012 Jenbacher J420G Gas Generator We have 2 units Jenbacher 420 available for sale, please see below the details for the units: Unit 1: Year of Manufacturing: 2012 Running hours: 73,357 hours Fuel: Gas Power Output: 1451 KW Model: J 420 GS-B 25 Frequency: 50Hz Speed: 1500RPM Voltage: 400 V Serial No: 1047229 Unit 2: Year of Manufacturing: 2012 Running hours: 74,179 hours Fuel: Gas Power Output: 1487 KW Model: J 420 GS-B L Frequency: 50Hz Speed: 1500RPM Voltage: 400 V Serial No: 1047212 Scope of supply: 1. Engine and Alternator mounted on skid 2. Breaker panel 3. Engine control panel 4. Gas lines Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the  ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 1.135 mm Weight 210 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box k ...

Key data: 800 KW, 1000 kVA

ENGINE: 12M33D900E310NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 1000kVA) / 800(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 7500kg DIMENSIONS L/W/HEIGHT (MM): 550020002100 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full a ...

Key data: 400 KW, 500 kVA

ENGINE: Man E2842LE232 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 500(kVA) / 400(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: BIOGAS COOLING: WATER-COOLED WEIGHT: 6400kg DIMENSIONS L/W/HEIGHT (MM): 550020002100 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details an ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 351 KW Connection voltage 3 x 400 volts Setting range 25 - 350 amperes Switch-on time 60% ED at 350 amperes 100% ED at 300 amperes Current setting 28 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 190 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 504 W, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece use ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 451 DW Connection voltage 3 x 400 volts Adjustment range 25 - 450 amperes Switch-on time 40% ED at 450 amperes 60% ED at 420 amperes 100% ED at 340 amperes Current setting 42 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 1.135 mm Weight 220 kg Special accessories Automatic wire Volt and ampere digital display Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part b ...

Key data: 200 KW, 250 kVA

ENGINE: Man E2676LE202 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: BIOGAS COOLING: WATER-COOLED WEIGHT: 4400kg DIMENSIONS L/W/HEIGHT (MM): 430013002000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details an ...

Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 451 KW Connection voltage 3 x 400 volts Adjustment range 25 - 450 amperes Switch-on time 40% ED at 450 amperes 60% ED at 420 amperes 100% ED at 340 amperes Current setting 42 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 200 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box ...

Sell two new (commissioning 01.05.2023) wood gasifier - pyrolysis plants (each 50KW electric and 120KW thermal) with immediate effect for health reasons. The systems are sold as a complete system with entry system, moving floor (Heizomat) and dryer (11KW) 250KW (cooler). At the moment, the systems are not running in continuous operation, as the heating concept could not be implemented for health reasons. The systems run reliably and can be controlled and monitored via a remote monitoring system. In addition to energy, about 1.5 to 2 tons of biochar or biochar are produced per month. If necessary, support can be provided during dismantling and assembly.

Key data: 1622 , 1835 , 400

2012 Caterpillar 3516C Gas Generator Containereed Package These containerised package XL has been bought for the UK project about couple of years ago but the project did not go ahead as planned. It has approx 25,000 hours and another unit with 26,000 hours on the clock. The containers also have CSC approved and testing certificate for shipping. The details are given below:- Technical specification of CAT 3516C Generating set Unit 1: Sr No: XL600164 Ar No: 3787743 Advertised Power 1622 KW Speed: 1500 RPM YOM: 05/2012 Unit 2: Sr no: XL600135 Arr no: 3787743 Advertised Power: 1622 KW Full load Speed: 1500 RPM YOM: 04/2012 For arranging the visit inspection; and pricing information feel free to contact us at: Infoukpowergeneratorsltd 00447956518924

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (75 kW) 6 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Old part deposit: 6,000 euros

The machine is in good technical condition. Maximum table size: 12000 x 2500 mm Maximum sheet thickness: 25 mm (plasma torch) Maximum drilled diameter: 30 mm (drilling unit) Filter device EKOFAN N8-10600 Software program for creating cutting plans AsperWin MSNC 500 control system Plasma source Kjellberg HiFocus 280i Compressor GA5 FF-13 EUR 400+N 50 TM CE Atlas Copco By prior arrangement, the possibility of a tour in progress.

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (110 kW) 6 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Charging: Exhaust gas turbocharger with water-cooled turbine housing Mixture cooler: two-stage mixture cooling with high and low temperature circuit Old part deposit: 6,000 euros

Inert gas welding device, inert gas device, welding rectifier -Max. Welding power: 330 A -Remote control connection -4 roller drive -Water-cooled -with: removable wire feeder -Incl. Ground cable -Gas valve -Dimensions: 550/900/H1170 mm -Weight: 116 kg

Max. operating temperature: 1600°C, including control cabinet, feeder and a defective glove box.

Machine type MIG/MAG welding system Make OERLIKON Type Citomag 506 W Connection voltage 3 x 400 volts Adjustment range 30 - 500 Ampere Switching time 60 % ED at 500 amps 100% ED at 420 amps Current setting infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed gearbox gearboxed 4-roll gearbox Protection up to a maximum of 300 A = 32 A over 300 A = 63 A Dimensions L x W x H 1,050 x 630 x 1,050 mm Weight 237 kg Age approx. 20 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box kpl. Equipped 1 piece user manual  ...

Scania DC 12, complete engine It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. - with exhaust manifold - with thermostat housing - with oil filler nozzles - Turbocharger as needed Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer.

MAN 2876 E312 gas engine It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. - Four-stroke gasoline gas engine, 150 kW - 6 cylinders in series - Engine cooling: water-cooled - Water-cooled exhaust pipe Installation, installation and service around engine and CHP optionally possible. Old part deposit: 6.000,- EUR Please contact us for a written offer.

Scania DC 12, fuselage engine It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. - without exhaust manifold - without thermostat housing - without oil filler nozzles Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer.

Circular cut diameter: 40-1000mm, max. cutting depth: 40mm, machine was scarcely used.

MWM TCG 2016 V 12 exchange unit It is a complete, refurbished exchange unit (motor + generator + basic frame). Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

Sale MWM TCG3020V20 , 50 Hz, 10.5 kVA, standard scope of supply, unused , other questions/answers PM @

Key data: 850 , 400

Make and Model: Jenbacher J 320 Fuel Landfill Year: 1998 and rebuilt in 2015 on 40,000 hours Hours : 86,000 Capacity kW : 850 Frequency : 50 Hz Voltage: 400 V Scope of supply: Complete Containerised Set, Engine, Alternator, Frame, Control system, Gas Line, Cooler, Exhaust system. Service History: Major service in 2015. Cooler is new. Exhaust system is restored with new parts. Available for sale Now. Price: €20,000

stainless steel for sheets, boxes, dishes etc. Connector 32A Heating 5 kw Circulation pump max. 200W Year of construction 1989 Dimensions 780 x 950 x 1950 mm high

Nominal oil/gas output: 460kW, max. rated power input: 1000W, were maintained regularly.

Nominal heating power: 80kW, length: 710mm, width: 1805mm, height: 1072mm.

Nominal power: 468.2kW, max. temperature: 100°C, capacity: 59l, length: 1870mm, width: 845mm, height: 1460mm, weight: 465kg, was maintained regularly.

Nominal heating output: 22.5-90kW, weight: 175kg, the machine was never used.

Fuel: natural gas, power: 300-2000kW, connection pressure: 15-500mbar, electric power: 4.32kW, operational hours counter: 38,723h, with documentation, without control cabinet.

There are two identical burners available, power: 350-2800kW, connection pressure: 15-500mbar, connected load: 9.23kW.

Gas Incubator,Heraeus BB16,max temperature 55ºC

Gas Incubator,Heraeus BB16,max temperature 55ºC

Capacity: 3000 kg Production capacity: 1500 kg/h degree: 1200 °c heating capacity: 1700 kcal/KW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooking vessel, gas heated, inside dimensions: 1200 mm x 830 mm x 600 mm, total dimensions: 1820 mm x 1400 mm x 1060 mm. Lot located in Skierniewice (PL), viewing and pick up in consultation with Industrial Auctions B.V.

Cooking vessel, gas heated, inside dimensions: 1470 mm x 830 mm x 550 mm, total dimensions: 2000 mm x 1250 mm x 1060 mm. Lot located in Skierniewice (PL), viewing and pick up in consultation with Industrial Auctions B.V.

weight max. in kg: 2500 kg stroke: 3200 mm fork length: 1000 mm Drive: Gas Side shift: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 4,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MWM TCG 2016 V 8 Exchange Engine / Shortblock It is a refurbished replacement engine. Repaired according to manufacturer guidelines and RAL quality seal. Further information on the scope and design can be found on our homepage buecker-essing.de Out- and installation as well as service around engine and CHP can be optionally provided. Please contact us for a written quote. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

AGILENT HP 6890N System Agilent 6890N Gas Chromatogtaph Single FID detector Single Split/Splitless Inlet Agilent / HP 7683 Injector Agilent/HP 7683 Tray PC with preinstalled Chemstation software Refurbished

Instrument for gas chromatography AGILENT mod. GC/ MS 7890/5975 Including: Agilent 7890GC Agilent 5975 C MSD EI Source and Diffusion pump Injector Tray etc. Refubished

TO WHOM AT MAY CONCERN ; WE VE NEW UNUSED 3 SETS NAPIER NA 307 GAS INLET& OUTLET CASINGS AND INLET ELBOWS AT OUR STOCK. 3 SETS GAS INLET & OUTLET CASINGS ARE NEW AND NEVER MONTAGED . PLS REFER SOME PICTURES ON ATTACHE IF YOU VE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

GAS FIRED STEAM BOILER : MAKE : AMF / CALLENS YOC : 10/1995 CAPACITY : 2.240.000 kcal 2605 kw Pressure : 12,24 kg/cm2 12 bar • With a water supply temperature of 100°C, the steam production should be about 4 tons/hour

A 3552 KW Solar Centaur 50 gas turbine for sale. Brand: CAT Solar Centaur 50 Type: EH5701-59-G Electr. Power: 3652 KW Generator: ABB Stromberg Drives Type: HSG 710K4 Electr. Line: 5000 KVA Voltage: 10500 V Year of construction: 1991 Weight: 21.000 Kg FCA freely charged in Koblenz

Automatic gas-atmosphere exchange system and ultra-high-vacuum-high-temperature furnace for thin tubes for molecular cleaning at 12 stations for thin tubes from 2mm diameter to 120cm in length and conditioning or replacing the gas atmosphere inside the tubes in one pass

Gas Engine Generator Set (CHP/BHKW) Waukesha 16V150LTD for natural gas Serial number 700036 Stamford generator P.I734C2 400V/231V50Hz, 1327 KVa 1785 Amp year 2009 Serial number C265013/1 Scope of delivery: - Generator set - Control panel - Gasline section as displayed

Gas stove with electric ovenMKN type 2163403-02 with 4 burners, 2 large, 2 slightly smaller. Is used and functional. Oven inside Dimensions: W.: 53 cm, D.: 50 cmOutside dimensions W.: 80 cm, D.: 70 cm, H.: 88 cm

Power: 5000 kVA / 4000 kW Year of construction: 12/1992 Current: 275 A Voltage: 10.5 KV Frequency: 50 Hz Rotation: 1500 rpm Weight: Approx. 13.6 to. Protection class: IP 23 In 2017/2018, the following work was carried out: Stand winding in insulation class F completely renewed Inductor finely balanced and refurbished at nominal speed Reman refurbished plain bearings Other parts overhauled Tested and test run 2019 Prior sale reserved - errors possible

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Working space: Width: 600 mm Height: 650 mm depth: 800 mm External dimensions: Length: 1200 mm Width: 900 mm Height: 2000 mm