gas vacuum used for sale

Qty. 1 Second-hand gas heated log furnace including hot shear Mfc.: ELHAUS Type: L250-90/135/4FK – WS250BD Built: 1999 Log dia.: 10” – 254 mm Log length: 5 – 7 m Billet length: 650 – 1300 mm Min. shear temperature: depending on the alloy approx. 340 – 400 °C Log temperature max.: 530 °C Heated by natural gas Hu=8.600 kcal/Nm³ Gas consumption: 234 kWh/tAl – 23.5 Nm³/t Al El. power: 130 kW Number of heating zones: 4 Number of circulating zones: 3 Dimensions of the furnace: 14.75 x 2.2 x 3.9 m - L x W x H Hot shear Recoil pressure: 0 – 100 bar Recoil stroke: 1.85 m Shear force: max. 1.69 MN at 210 bar Shear stroke: 360 mm Output pressure: max. 160 bar Output stroke: 325 mm Closing pressure: 210 bar Spreading stroke: 2 x 4.0 mm Dim.: Height above hallway: 2.9 m Length over everything: 3.95 m Width over everything: 2.65 m Hydraulic station Max. ...

SUB: USED COMPLETE T/C BBC VTR 304-32 YOB 1996 HAVE A GDY SIR; WE VE COMPLETE USED COMPLETE T/C BBC VTR 304-32 AT OUR STOCK READY TO DELIVER AT IZMIR / TURKEY PLS FIND BACON AT BELOW VTR 304-32 NO. 5854 N MAX 450 C.. T MAX 620 C. YOB 08/1996 IF YOU INETEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

FOR SALE COMPLETE T/C ABB VTR 454-32 TO WHOM IT MAY CONCERN; WE ARE ABLE TO SUPPLY USED COMPLETE T/C ABB VTR 454-32 AT TURKEY PLS FIND SPECIFICATION T7C AT BELOW. TYPE VTR 454-32 HT 833511 N of Saad 290 Nbmax 276 t Saad 580 tbmax 550 YOB 2005 SWITZERLAND IF YOU'VE ANY QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

FOR SALE... 2 SET T/C TO TCR 18-42065 YOB 2010 AT TURKEY HAVE A GOOD DAY SIR. WE VE 2 SET COMPLETE T/C TO TCR 18 - 42065 AT OUR STOCK. PLS FIND TURBO CHARGER SPECT AT BELOW. TYPE: TCR 18 - 42065 WORK NO: 7642160 / 7642161 SPEED: 37300RPM T MAX: 650C. YOB: 2010 IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info@aliagamarine

SUB: FOR SALE... BBC VTR 354A-32 COMPLETE T/C AND SPARE ROTOR AND SHAFT AT TURKEY HAVE A GOOD DAY SIR. WE VE COMPLETE USED BBC VTR 354A-32 T/C AT OUR STOCK WE VE SO ADDATIONALY SPARE 1 PCS COMPLETE ROTOR AND SHAFT. PLS FIND SPECT AND DETAILS AT BELOW.. BBC TYPE 354A-32 their 365 1/s No. HT 382239 tmax 620C. V 01116 R 012 H 04112 W 12108 E 03317 U 032 L 141 T 011 IF YOU'VE ANY QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Complete gas detector station / gas measuring device, Polytron IR Ex, used Manufacturer: Dräger Type: Polytron IR Ex Status: Used - top condition Price: The total price of the complete system is only 50% compared to the sum of the usual market prices of all assembled used parts. The complete gas measuring device is mounted on a mounting plate of a control cabinet and consists of: - Mounting plate 70 x 170 cm - Air suction pump - Gas measuring device Dräger Polytron IR Ex - Brooks variable area flow meter 1355 / D1D4A1Z5BA00 - Switching amplifier Pepperl u Fuchs KFA6-SR2-Ex1.W - Circuit breaker and other accessories - Lütze Power suppy NGP 24/5-2741 The air is sucked in by the pump and fed into the gas detector and measured. Function guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Since we know that the system works pe ...

Complete gas measuring station / gas detector device, including Dräger Polytron 2 IR Ex 334 etc. used Manufacturer: Dräger Type: Polytron 2 IR Ex 334 Condition: Used - top condition Price: The total price of the complete system is only 50% compared to the sum of the usual market prices of all assembled used parts. The complete gas measuring device is mounted on a mounting plate of a control cabinet and consists of: - Mounting plate 110 x 170 cm - Air suction pump - Gas measuring device Dräger Polytron 2 IR Ex 334 - Brooks variable area flow meter 1355 / D1D4A1Z5BA00 - Switching amplifier Pepperl u Fuchs KFD2-SR2-Ex1.W - 2 Pepperl u Fuchs KFD2-STC4-EX2 transmitter power supplies The air is sucked in by the pump and fed into the gas detector and measured. Function guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Since we  ...

Deck baking oven MIWE, type: ideal 1500/4 DS-ZK - 2 thermal circuits - 2 piece gas burner - replacement steam pipes available - maintenance burner 2 x a year - maintenance oven 1 x annually by MIWE - State: good, ready lighting system: gas Baking surface: 18 m² Oven width: 1.80 m Oven depth: 2.00 m External dimensions: 2.55 B x H 2.35 m El. Supply: 400 V, 3N, 50 Hz, 6.5 kW Nominal thermal power: 121 kW Working pressure: 8-50 mbar Sales by closure. Inspection and testing according to arrangement. Costs of disassembly and transport on request. Like to disassemble and reassembly we the oven for you.

RECON Part number: C309460 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

MAN 2876 LE302 gas engine (biogas) 190KW (also as 210KW-Version) It's a replacement engine for various biogas CHP. Overhauled according to manufacturer guidelines and RAL quality seal(maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a quotation. We have other Exchange engines (2848 with 250KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers, etc. and other components and spare parts for MAN gas engines in stock.

MAN 2848 LE322 gas engine (biogas) 250KW It's a replacement engine for various biogas CHP. According to one manufacturer guidelines and according to RAL quality seal repaired (maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a written offer. We have other replacement engines (2876 with 190KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MAN gas engines in stock.

MAN 2842 LE322 gas engine (biogas) 370KW It's a replacement engine for various biogas CHP. According to one manufacturer guidelines and according to RAL quality seal repaired (maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a written offer. We have other replacement engines (2876 with 190KW and 2848 250KW) and AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MAN gas engines in stock.

HAVE A GOOD DAY SIR. WE VE NEW UNUSED. MITSUI MAN NA 57 TO 725 P IT STOWED AT FABRIQ WOODEN BOX. IT WILL NEVER MOUNTED AND USED. PLS FIND SPEC AT BELOW. READY TO TRANSPORT. EX STOCK. MITSUI MAN: NA 57 TO 725 P NO.: 2430 SPEC AD: 490 A4K : 404.3 REVOLUTION: 15000 RPM MAX TEMP: 600 C IF YOU'VE ANY FURTHER QUESTIONS PLS DO EMERGENCY HESITATE TO CONTACT WITH US. READY TO TRANSPORT. EX STOCK. Capt. Ayhan Ugurluba Best Regards ; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Used deck baking oven MIWE, type: Ideal 1800.5 FO - In the bakery State baking surface: 18 m² Number of spots: 6 pieces Hearth size: 1,800 x 1,600 mm -With gas - oil burners according to customer requirements - manual control - fully assembled - State: well the stove is technically and visually in good condition and is ready for use immediately. Delivery and installation available on request. We like to overtake even the oven for you.

Used deck baking oven MIWE, type: Ideal R - In the bakery State baking surface: 18 m² Number of cookers: 5 units Hearth size: 1,800 x 2,000 mm -With gas burners -Oil burner according to customer requirements - computer control - hood with fan - completely assembled the furnace is located in the State of the bakery and is immediately ready for use. Delivery and installation available on request. We like to overtake even the oven for you. Request

MWM TCG 2016 V 12 Exchange unit with complete motor and generator overhauled on basic frame Payment by invoice warranty Bücker & Essing GmbH assumes the warranty exclusively for the delivery volumes supplied by it. A warranty for damages that are not directly related to the delivered and performed thing, as well as a warranty for consequential damages, are expressly not assumed. The warranty is assumed for a further 12 months at the most or until 8000 operating hours have been reached after commissioning, whichever of the two cases occurs first. Regardless of the commissioning date, the maximum warranty period is 15 months after delivery. The warranty case must be notified immediately in writing. Warranty claims can only be asserted if the commissioning and maintenance have been carried out and documented in accordance with the manufacturer's regulations. Commissioni ...

MWM TCG 2020 V12 CHP unit used It is a complete, used CHP unit (motor + generator + basic frame). specifications: Gas application: Biogas Mileage: approx. 60,000 Bh Condition: E70 due Year of construction: 2014 Power: 1200 KW The unit was expanded to run in 06/2021. Please contact us for a written offer. We also have other aggregates and replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation, installation and service around engine and CHP optionally possible.

Further information on request

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

Horiba Here we offer you a Horiba exhaust system Mexa 7100D. Including JAG-10-000-061 bottle trolley approx. 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust gas aftertreatment, Assessment of exhaust gas aftertreatment systems Modal analysis (dynamic or transient analysis) during transient operations Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 Kg Year of construction 2016 Type: Mexa 7100D Condition: used Pick-up from location Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

FOR SALE NEW UNUSED MAN NR 20 /149 COMPLETE EXHAUST GAS TURBOCHARGER IN WOODEN BOX. TO WHOM IT MAY CONCERN; WE VE NEW UNUSED GENUINE MAN NR 20 /149 COMPLETE EXHAUST GAS TURBOCHARGER WITH SILENCER AT AT OUR STOCK. IT IS NEVER USED & MONTAGED . IT WAS STOWED AT WOODEN BOX PLS FIND SPECT AT BELOW. TYPE NR20 / R149 Work No. 7531934 t Mmax 650 C SPEED 44000 rpm YOB 2011 WEIGHT 450KG EX OWNER SUPLIED FROM MAN . MADE IN SWITZERLAND. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Cylinder head for MWM TBG 620, TCG 2020 needed, not overhauled. Can we get over on request. Quantity: On request. Please note: We have various other parts of from different manufacturers and types available.

Make and Model: GE WHG-125 Year: 2011 Hours: 6000 approx. Year : 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: These units have been decommissioned and been in storage since May 2016. Unit 1 and 2 had a report of an MBC fault (magnetic bearing controller). Unit 3 has several parts missing due to a failure in the power electronics. Some parts of the Power electronics, PLC, speed drive for the refrigerant pump are missing. Unit 4 had a failed heat exchanger and filled the ORC with water, would need stripping to determine the full extent of the repairs needed. Extra: These units run on a working fluid (refri ...

Key data: 117

Make and Model: GE WHG-125 Year: 2011 Hours : 16,000 & 35,000 Capacity kW: 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: The containerised units were decommissioned towards the end of 2018. Both of the units were operational before decommissioning. Unit 1 has the upgraded 3600 MBC (magnetic bearing controller). Both of the units are containerised at present but can be removed. Extra: These units run on a working fluid (refrigerant R245Fa) that does not come with the units as this was sent for recycling after commissioning. This will need to be purchased and filled during installation and commissioning.  ...

Make and Model: GE WHG-125 Year: 2011 Hours : 7155 and 6849 Capacity kW: 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: These units have been decommissioned and been in storage since May 2016. Both of These units were operational at the time of decommission. Extra: These units run on a working fluid (refrigerant R245Fa) that does not come with the units as this was sent for recycling after commissioning. This will need to be purchased and filled during installation and commissioning . Price: €70,000 each

Titan 130 package Year of construction 2005, new turbine, NOT overhauled 15.000 hours 11.8 MW 50 Hz Installed and in standby condition, maintained by Turbomach, immediately possible to extract and ship for exchange purpose

5,000 litre storage containers According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted. L = 2.80 m / D = 1.60 m / weight CA. 1.3 tons. / free charged ex works. Description PTO pump: Non calibratable type eco-box-55- Capacity up to approx. 55 l / min. suitable for diesel fuel, incl. -Automated fuel dispenser with PC softwa ...

Gas turbine with generator model M1A-13D 2,500 hours after overhaul 50 Hz, 400 V, in excellent condition, extrated and ready for transport.

JENBACHER YEAR: 1997 HOURS: 23000h ELECTRIC POWER: 827 kW – 400V AC 50Hz The equipment is stowed and ready to load. This engine has been stopped regularly in 2011. VOLUME OF SUPPLY: They are integral parts of generators and groups necessary for their execution (gas input, output energy): ELECTRICAL GROUP: Engines JENBACHER 316 GS / 827 kWe Year 1997 , Operating hours: 23000h, 2 units. Alternator STAMFORD / 1000 kVA -800kW- 400V AC 50HZ Generator (alternator, motor and PLC motor) Control Panel Generator (DIANE XT) Auxiliary control panels Low voltage circuit breaker petrol train Silencer Slippers Technical documentation You can find us on Whatsapp: +34 611457522 Email: Sales@eurogensets.com

JENBACHER YEAR: 2013 HOURS: 25000h ELECTRIC POWER: 1860 kWe – 400V AC 50Hz PH 3 This equipment is properly stowed and ready to load. SCOPE OF SUPPLY The following are integral parts of the generators and groups necessary for their implementation (gas input, power output): GENERATOR: Jenbacher Model: J616 GS C02| 2000 kW| Year 2013, total hours of operation: 25000 h (15000 hours after the complete revision carried out in 2013). Alternator STAMFORD/ 1860 Kw 690V | | 50Hz 400 V AC Phase 3. Generator (alternator, motor and PLC motor) Control Panel Generator (DIANE Blue) Gas train Y- exhaust gas pipe Technical documentation of the equipment Service history: The maintenance has been carried out by LA EMPRESA LONJAS TECNOLOGÍA SL according to the manufacturing instructions. You can find us on Whatsapp: +34 611457522 Email: Sales@eurogensets.com

Manufacturer: Solar Turbines INC, San Diego USA Model: Taurus 60 with Solonox combustion, Packager: Turbomach Version: T 7301 Yoc package: 1998 Turbine engine: new engine installed in 2012, only few hours since installation Condition: fully serviced and ready for start. Capacity: 5200 kW Speed: 14.944 U/min continual Fuel: Natural Gas and Light Diesel (dual fuel) Fuel consumption: 122.469 kJ/kWh Burners: 12 Start system: electro.hydraulic, 90 kW Outlet temperature: 486°C Exhaust gas: 21.244 kg/s

FOR SALE ...COMPLETE T/C NAPIER NA 457 AT TURKEY; HAVE A GDY SIR WE VE COMPLETE T/C NAPIER NA 457 AT STOCK. PLS FIND SPEC AT BELOW NA 457 701276 4FM157F 225 FJ 19500 650C. IF YOU HAVE ANY QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Kind Regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Used deck oven for the bakery store MIWE, Type: ID 5.0616 - 11.1 2kr - each baking chamber 1m² baking space (total 5m²) - maintenancing every 3 month - burner: gas - condition: very good Location: North Germany The oven is in a very good condition and ready for operation. Inspection and test run are possible at any time. The original price in 2005 was EUR 40.000,-

Gas forklift Yale Type: GLP-030AUA V Serial No.: Y382072 Year of construction: 1982 Weight: 2,780 kg Capacity: 1,500 kg Battery voltage: 12 V Forklift truck is fully functional and is protected with us in the Hall. Can be visited at any time! In very good condition!

For sale a motor block of 442 KW Deutz TBG604BV8 gas CHP generator. The crank shaft we can offer also. FCA Free charged on your truck.

Praezision tube Residual bestaend from the production of gas pressure cylinders Stainless steel, probably V2A or V4A Laenge each 6m The following dimensions should be available, exact quantities on request or on order. 3x20 7x23 4x28 1x40 Sale against bid either as a total length or by length or by meter Special price

Electric pumping system for oil or diesel for controlled extraction of oil quantities from large containers such as oil barrels, tanks, etc. Consisting of electric motor with pump, pressure monitor, hose reel, pump gun with manual pass counter with rigid outlet. Display of the extracted quantity in litres Electric pump for fresh oil supply, suitable for barrel removal or as a tank pump, Closed hose reel for oil, hose length xxm xx" hose, with wall mount and pump gun. Special price

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 750 l/h power heating heater / oil boiler 70 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical protection 16 A Laenge 1400 mm width 900 mm Height 1850 mm Weight 350 / 450 kg Gas consumption flu acetic gas 5.5 kg/hr. Gas consumption natural gas natural gas 7.5 m3/hr. ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 1500 l/h power heating heater / oil boiler 140 kW Electrical power 1.8 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1715 mm width 900 mm He 1900 mm weight 500 / 600 kg Gas consumption flu vinegar gas 11 kg/hr Gas consumption natural gas 15 m3/hr. ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 500 l/h power heating heater / oil boiler 45 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm weight 330 / 430 kg Gas consumption flu vinegar gas 4 kg/hr Gas consumption natural gas 5 m3/hr. ; New machine - best condition

2 x 2.9MW 60Hz NIIGATA 18V22AG Gas Power Plant for sale NIIGATA says that 18V22AG has a high electric thermal efficiency of 40% or more and the 22AG engine produced 30% higher power than a conventional spark ignition gas engine with the micro-pilot compression ignition system. Produced in 2004, this generating sets had been successfully operated about 32,000 hours and had a good condition as seen in the photos and the plant was dismantled and has been well preserved in our factory and ready for immediate delivery. Main Specifications: - Engine Model: 18V22AG x 2 sets - Maker: NIIGATA - Continuous Output: 2880kWe x 900 rpm - Frequency & Voltage: 60Hz & 6600V - Year of Production: 2004 - Running Hours: abt. 32,000 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set ■ Main Specifications ▣ Gas Engine Maker NIIGATA Model 18V22AG Quantity 2 sets Ye ...

GE Jenbacher JW 316 GS Power Generation Unit 760 kW Gas Engine For sale is a used gas generator set or CHP, combined heat and power plant with GM Jenbacher engine in good condition Specifications: Condition: very good Engine: GM Jenbacher 16 cylinder , V16 biturbo gas water cooled Type number : JW 316 GS Power : 760 KW RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts - Built in : 1996 - Incl. batteries -Switchboard -It was recently dismantled from the hospital building, and ran until the end without any problems. Scope of delivery as shown will be delivered like shown All our articles are dismantled, cleaned and visually checked for damage by expert personnel of our company before being sold. All article relevant data / information can be found in the description and the pictures. All information is given to the best of our kno ...

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Setting range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roll drive Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece glass 90 x 110 mm white 1 piece protective glass 90 x ...

Used metal cabinets for storage of gas cilinders design for installation in warehouse/workshop. price €220 each

Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 280 K Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 40% ED at 280 amperes 60% ED at 230 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 870 x 480 x 740 mm Weight 105 kg Special accessories Display and wire automatic Age 6 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield  ...

Key data: 480 , 400

Make and Model: Waukesha VGF36GLD Natural Gas Generator Set Fuel: Natural Gas and Biogas Year: 2016 Hours: 3,900 Capacity: 480 kW Hz: 50 Voltage: 400 V CHP Complete containerized plant with urea emissions purifier. Scope of Supply: Engine, Alternator, Frame, Control system, Gas line, Water heat exchanger, Gas heat exchanger, Radiator, Switchgear, Soundproof genset container, Chimney, Pumps, Original folders, Urea emissions purifier, Special tools, Spare parts and other accessories are included. General Information: This system was used by the installer as a showcase to promote their product. Now having to promote another product, they need to sell it to install the next one. It can work both with natural and biogas. Now Available for Sale. Price: € 185,000

new gas turbine packages 16 MW each possible with OEM guarantee 50 Hz gas fired

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 D Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Execution of mobile industrial plant with separate DV case Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 140 kg Special accessories VB-cable 1.6 mtr. Long Age 9 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece pro ...

Key data: 260 , 400

2 x CHP Schmitt Enertec Energen Combined Heat and Power units for the simultaneous production of electricity and hot water. Both units have had full engine rebuilds and are in good condition. Make and Model: Schmitt Enertec M08-BT2D22 Year: 2015 Hours: 65,600 kW: 260kW Fuel: Biogas Hz: 50 V: 400 Scope of supply: Engine, alternator, exhaust gas heat exchanger. Condition: Both fully rebuilt with new parts which include New cylinder liners, New pistons, New cylinder heads, New Conrods, New shell bearings . Unit 1: Total Run Hours: 67,000. Hours since engine rebuild: 5,000 Unit 2: Total Run Hours: 65,600. Hours since engine rebuild: 2,000 Price: £40,000 each

Key data: 1095 , 400

COMPLETE TRIGENERATION PLANT INCLUDING CHILLER AND COOLING TOWER Make and Model: JENBACHER 320 G.S N-L Fuel: Natural Gas Capacity: 1095 kW Year: 2007 Hours: 50,000 HZ: 50 V: 400 30,000HR MAINTENANCE SERVICE PERFORMED IN 2017 ON 28,000 hrs. Replaced 20 Cylinder Heads, Pistons complete with Piston Rings, Cylinder Liners Replaced Main Bearings Replaced Intercooler Overhauled Turbocharger, done by a specialist company Overhauled Plate Water Heat Exchanger, done by specialist company Camshaft checked and is in good condition Other works and checks not listed were carried out according to the GE Jenbacher schedule. Scope of supply: Gas engine genset, 2 x cooling tables, Gas line, Control panel, Switchgear, Silencer, Chimney, Piping, Power cables, Control cables, Chiller and Cooling Tower. Available for Sale Now. Price: 100,000€