arc mate used for sale

Cutting width: 3900 mm Dimensions (LxWxH): 5100 x 1700 x 3100 mm Height without legs: 2410 mm

- n.10 iron elements including gratings, gratings and more for scrap; elements for air conditioning system; n.1 low steel cabinet with doors Sliding; n.3 pallets of gypsum tiles 500x750 mm; n.10 ad polystyrene arch for concrete castings; n.10 pallets of various bricks including piñatas for floors, tiles, bricks, poroton type blocks of various measurements, type and Marseille tiles; n.3 pallets of tiles for internal/external mm 150x150; n.3 pallets of curbs, both straight and curved for sidewalks; n.1 igloo pallet for ventilated floor; n.4 pallets of self-locking grey concrete of various shapes and thicknesses; n.2 pallets of grey concrete blocks of various thicknesses; n.1 pallet of Cement roof tiles of various colours double Roman type - DEPOSITED IN OVANENGO (BS) - n.5 pallets of self-locking of various shapes and sizes; n. 3 baskets of Horizontal and vertical r ...

Universal Material Testing Machine Manufacturer: Lloyd Type LR5K MK 4 Serial No. 102894 Lloyd Instruments Sold with: -5000N force transducer (new) -Force transducer 250N -50N Load Cell -Manuals and CDs -Computer complete with screen -Software Technical Configuration: -Load range: 10N - 5kN -Force measurement accuracy:

Equipped with: M10 screw hole

Max. static force: 4000N, max. dynamic force: +/-4000N, temperature range: -160 to 500°C, including accessories, was last calibrated in 2020.

Max. operating weight: 41t, range: 18,000mm, max. speed: 20km/h, rated power: 160kW, operational hours counter: 18,678h, an on-site inspection is possible.

Tool steel, round material, shaft section shaft, steel block, shaft sawn Material section 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Material abbreviation: 90MnCrV8 Cold work tool steel with high hardness acceptance and good dimensional stability during hardening Application in toolmaking for cutting, punching and embossing tools. Rollers and profile rolls, measuring tools, guide strips, paper cutting knives. Delivery condition: Annealed to max. 229 HB Tensile strength as delivered: 770 N/mm2 Hardness: 790?820 C Tempering: 220?260 C Working hardness: 58-62 HRC Soft annealing: 680-720C - Medium alloy cold work steel - Oil hardener 4 pieces available, price per piece; used

Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1380 mm Thickness 74 mm - full steel plate - surface milled- 4 pieces screwed trailer blocks Net weight approx. 2380 kg; used

Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1580 mm Thickness 94 mm - full steel plate - surface milled- 4 pieces screwed hanging blocks Net weight 3400 kg; used

Scissors for reinforcing steel or bars max 32mm

Stock number: 3766 SLITTING LINE LONG STEEP LINE Manufacturer: AKV, Type: 1250 x 0.4 - 3 mm - 2238 Year of construction: 1989 Specifications: Size sheet width 1270 mm Min/Max. sheet thickness 0.4 - 3 mm mm Feed speed 0-65 m/min - Strip shears 0.4 - 3 mm - Discharge reel 12 T - Reel reel 12 T - Low discharge 12 t Accessories: Coil carriager 12 T

recycling shredder: . Number of shafts: 2 : und Plastikmüll weight: 22 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Material store, drying store -Electric driven with lifting unit -Max. Stroke: approx. 1500 mm -stable execution -Number: 3 x approx. 14 places -max load per lifting unit: 550 kg -with frequency converter in the gear motor -Drive: 0.075-0.37 kW -Speed: 12-61 rpm -Dimensions: 1800/1010/H3200 mm -Weight: approx. 2000 kg

Note: This is a second choice product, new unused. II. Option means there may be dust deposits, minimal scratches or dirt may be present. The drip pan is used to store non-leak-proof or opened containers such as paint cans, paint buckets, Cleaning products, etc. Optimally, the drip tray can be placed in a shelf shelf. The scope of delivery includes: 01x drip pan, second choice (new) Material color: sendzimir galvanized overall width: approx. 1,190 mm Usable width: approx. 1,150 mm total depth: approx. 450 mm Usable depth: approx. 446 mm total height: approx. 50mm Usable height: approx. 48 mm Material thickness: approx. 2.00 mm Weight | pcs.: approx. 10,390 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or  ...

Material stand stainless steel PAGUS 600 x 55 x 1320 mm Shelf area: 400 x 400 mm, 45° tiltable Height adjustable from 1000 - 1230 mm in 6 steps ( shelf horizontal ) document compartment ( removable ): 325 x 50 x 150 mm 4x swivel castor, 2x with parking brake with antistatic device Material: stainless steel used, tested ! Dimensions (at working height 1175 mm): 600 x 55 x 1320 mm

Offer 23305 Specifications: - Load capacity with 8 suction cups 500 Kg - Suction arm extension with additional 2 suction cups - Suction cup diameter 300 mm - Width with / without extension approx. 2550 / 1400 mm - Depth 950 mm - Manuel's tilt for horizontal + vertical working - Twisting device in horizontal + vertical working position - Depth in vertical working position 250 mm - Height in horizontal working position 1050 mm - Battery - Vacuum motor 12 V - Connection charger 220 V - Dead weight approx. 75 kg - Trolley W 1500 x H 1600 x D 450 mm

Mazak machining center mod. FH 480 Year 1995 X = 560 Y = 560 Z = 510 Cutting speed 32,000 mm./min 12,000 rpm CNC Mazatrol M Plus

Protection tube made of solid material, with flange ENDRESS + HAUSER TW15 - 00A1GA10 DIN 43772-4F diameter: Ø 24 mm total length: 260 mm tip diameter: Ø 12,5 mm Drilling diameter: Ø 6.5 mm, depth: 240 mm female thread: M18 x 1.5 Flange diameter: Ø 115 / 70 mm bolt circle diameter: Ø 85 mm hole diameter: Ø 14.0 mm Material: stainless steel ( 1.4571 ) New ! Dimensions ( packaging ): 260 x 120 x 120 mm

Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Material lift: assembly lift lift with cable winch -Load capacity: max. 226 kg -Lifting height: max 1.77 m -Equipment: with winch, with standard fork -Dimensions: 1700/690/H2230 mm -Own weight: 73 kg

Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Manufacturer: MO Weidmann, material lift assembly lift -Load capacity: max. 225 kg -Lifting height: max 1.78 m -Equipment: with winch, with standard fork -Dimensions: 1240/690/H2230 mm -Own weight: 76 kg

Forge grab, manipulator forge grab, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal grab, material grab, material grab -Manufacturer: VEB, material gripper type B04-Z10-1 -Load capacity: 1,000 kg -Span: see photos -Dimensions: 280/190/H320 mm -Weight: 21 kg

Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Material lift: assembly lift lift with cable winch -Load capacity: max. 226 kg -Lifting height: convertible, max. 6.09 m -Equipment: with winch and standard fork -Dimensions: 1700/660/H1360 mm -Own weight: 87 kg

Feed for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press -Round material feeding system: round steel feeding system with console -Feed: Lenze 2.2 kW drive type MDXMA2M 090-31 -Belt tension: pneumatic -Material tension: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic unit: can be included for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332kg

Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Manufacturer: Genie, Superlift Contractor SLC-18 -Load capacity: max. 295 kg -Lifting height: max 5.1 m -Techn. Data: see photos -Equipment: with winch, with standard fork -Dimensions: 1880/800/H2170 mm -Own weight: 151 kg

Material pressure regulator GRACO Type: 223-622 Material inlet pressure: max. 18 bar Pressure control range: 0.3 - 7 bar Material regulator for spray guns with connection size: 1/4 NPSM (A) ( inlet and return ) parts made of stainless steel, tungsten carbide in contact with material, Acetal and PTFE New ! with documents ! Dimensions ( material pressure regulator ): 95 x 45 x 65 mm Dimensions ( packaging ): 150 x 100 x 65 mm

Installation material, installation technology HILTI Installation technology - assortment etc. Rail system MQ, pipe clamps, fixed points, sliding elements, connectors, base plates and various accessories Weight: 200kg dimensions pallet: approx. 1200 x 800 x 240 mm

Material lift, height pallet truck, pallet truck, forklift, pedestrian pallet truck, pallet truck -Load capacity: 250 kg -Lifting height: max 5.0 m -Own height: 1880 mm -Width: 740 -Length: 1350 mm -Equipment: with winch, with standard fork -Dimensions: 1350/740/H1880 mm -Own weight: 118 kg

Forge grab, manipulator forge grab, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal grab, material grab, material grab -Tin claws -Wingspan: 0 to 250mm -Load capacity: 1,000 kg -Number: 1x available -Dimensions: 730/240/H860 mm -Weight: 118kg

Bushing material, bushing material, bearing material -Inner diameter: 339 mm -Outer diameter: 422 mm -Length: 331 mm -Material: gunmetal -Quantity: 1x piece available -Weight: 142 kg / piece

Mounting material for modular industrial step HYMER Series 6877 DIN EN 14183 see also W533, W534, W535 and accessory set W537 ! New ! Dimensions ( packaging ): 270 x 150 x 210 mm

Stock Number: 3819 Profile Steel Shears - Hole Punching Machine Manufacturer: MUBEA, Type: KBLH 550 Machine NO.: 0157887125599, Year of manufacture: 0 Specifications: Gr. Druckl 50 To Max. hole punching dia. 30 x 15 mm Stroke length 0-60 mm Projection 410 mm Flat steel 400 x 10 / 180 x 20 mm Angle steel 50 mm Length: 1400 mm, Height: 1800 mm, Width: 800 mm, Weight: 1800 kg

GRAVIMETRIC FEEDING AND BATCHING THROUGH INTEGRATED PRODUCTION SUPERVISION Gravimetric dosing particularly suitable for injection moulding, blow moulding machines and extruders, filling and packaging machines for granulated and powdery materials. The solid steel machine frame and the particular software allow its installation even on machines with constant and controlled vibration. The different types of construction allow the combination of 2 to 6 components, differently dosed in small amounts with normal dosing screw.

1 raw material trolley with 7 white tubs uncleaned

Hereby 2 a material stand are offered for sale. The price is per piece. The item is in a used condition but works perfectly. specifications: - Load capacity: 150kg - Platform width: 150mm - Platform depth: 410mm - Height: 520 - 800mm - Tilt capability: 15° , 30° -Roll material: thermoplastic elastomer (TPE)

Offer 22550 Specifications: - Galvanized design with attached crane eyes made of flat iron - Usable inner area approx. 4 m² - Floor load per m² approx. 500 kg - Built-in shelving with three shelves - Inner width 2000 mm - Interior depth 2000 mm - Internal height 2000 mm - Door opening W 1300 x W 1890 mm - Space requirement approx. W 2100 x D 2150 x H 2250 mm - Height with crane eyelets approx. H 2450 mm - Weight approx. 300 kg

Inv. Num. : 7366 Type: Hydracrop 70- SD Producer: GEKA Created: 1993 Parameters: Power consumption: 9 kW Impact neck: 500 mm Machine weight: 2400 kg Dimension: 1300 x 2100 x 1800 mm Equipment: 2 foot pedals

Type: JHG 60 material edging machine Year of production / SO / GO: 2015 / - / - Description: Machine for edging material edges. Presses ornaments into the web. Machine in good technical condition, after agreement the possibility of testing. Machine dimensions: 1636 x 990 x 1330 mm. Weight 1260 kg. Available in English.

Coil width max. 2000 mm

Coil width max. 1,250 mm

1 piece of galvanized bulk container with stand (open top). Metrics: Inner diameter: 3m Length without funnel, without feet: 3.20m Hopper length: approx. 1m Funnel can be disassembled.

Bulk material silo, storage container with approx. 18m³ incl. feet Metrics: Diameter: 3m Length without hopper: 2.50m Length hopper: 1m Can be disassembled.

Bulk material silo, storage container with approx. 14m³ incl. feet Metrics: Diameter: 3m Length without funnel: 1.90m Length hopper: 1m Can be disassembled.

according to PDF enclosed

Offer 23428 Technical data approx.: - Load capacity with 8 suction cups at 60% operating vacuum - Horizontal 0.15 t - Suction cup diameter 150 mm each - Adjustable suction cup distance - length up to 2500 mm - Depth up to 750 mm - Distance or height lower edge of suction cup – crane hook 380 mm - Vacuum motor power 0.18 kW - Connection 400 V - Space requirement approx. W 2500 x H 750 x D 1200 mm - Dead weight approx. 70 kg

Single batch of plastic raw materials: -16 big bags "Regenerated" - deposited in Rodengo Saiano (BS) -16 big bag "LDPE" - deposited in Rodengo Saiano (BS) -1 big bag "Elite 5230" - deposited in Chiari (BS) -1 big bag "Braskem R7051" - deposited in Chiari (BS) - Pallets of Master Vario warehouse - Macrolene Pink and Green - deposited in Chiari (BS).

Roller trolley used with lattice support, galvanized steel, Dimensions 750 x 1,150 x 150 mm partly with ball-head suspension for transporting the wagons Sale without warranty and guarantee Offer price is for 1 piece of roller trolley Purchase of at least 50 pieces, from stock 57319 Bad Berleburg,

Description: Type approval 9 DB 107 Payload capacity 2360 kg Last test September 2019 2-axle without further accessories Approx. Onsite Dimension. (l x w x h): 2,150 x 6,075 x 2,800 mm, weight approx.: 1,140 kg