arc mate used for sale

Top condition, underground storage tanks, water tank, water tank, underground tank, diesel tank, heating oil tank, single-walled steel tank Content: 30 m³ / 30,000 litres Material: stainless steel tanks, very thick-walled Dimensions: approx. Ø 2.00 m x approx. 10.00 m long Weight: approx. 9.0 t Other: outside with new bitumen paint The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can be used as storage tank for water, liquid feed, whey, molasses, manure, AHL, ASL, seeping juice, rapeseed oil, cooking oil, rain collection tank, fire water tank, fire water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing cont ...

REWA R35-2 Product no.: RE-HU-2015-0901-PEC2 System: eccentric screw pump Manufacturer: REWA Type: R35-2 Year: 2014 Flow rate: 8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 4 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber

The aspirator Wetzikon weather is 3 pieces in good condition, ready to use. It consists of intact plants, which have operated until now following machines: CNC machine Striebig vertical panel saw Planing machines Wide-belt sander Table circular saw Edge glue machine Moulding machine The exhaust system consists of 3 installations: 1 system with filter and 2 bag system 2 + 3 system with wooden box below and filter system various pipes and branches, 1 fan 3 HP, 1 fan 2 HP etc. Weight 350 kg Built in 1975 Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Submersible pump Manufacturer: Netzsch Type: 4NT04 Length: approx. 1,80 m Characteristics of the immersion pump -insensitive to Sandy shares in the pumped liquid -pulsation promotion -very high suction capacity The immersion pump offers you: -low life cycle costs -high pressure stability -exact dosing accuracy Advantages of the immersion pump -Operation possible at high water content in oil -Reliability for oils with high viscosity -ready to use media with high fixed material freight Submersible pump is still unused, so as new and in very good condition!

Digital silver halide polyester Exposure system Internal drum Material: 2 magazines (can be upgraded) Material definition: Up to 16 Tape definition: Up to 16 Capacity of material: Up to 61m / 200 ft per roll. Plate thickness: 4 mil / 0.1 mm - 8 mil / 0.2 mm Plate size: 454 x 525 mm 3600 dpi: 14 plates per hour 2540 dpi: 17 plates per hour 1800 dpi: 24 plates per hour 0900 dpi: 29 plates per hour With HQ-RIP workflow

approx. 25 m ³ / 25,000 litres steel tank / firefighting water tank / water container / water cistern / storage container / water tank: good condition content: 25 m³ / 25,000 litres Material: stainless steel tanks, above ground or underground tank Dimensions: approx. Ø 2.00 m x 8.00 m approximately Weight: approx. 6.0 t The tank is repainted from the outside with a bitumen paint, see picture above. The container is used, inside empty and properly cleaned. According to the age traces are present. The container can be used as storage tank for water, manure, AHL, ASL, seepage juice, rapeseed oil, rain collection tank, fire water tank, water tank, water tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changi ...

A shelving system that can be used for shop fittings, as well as for storage by Tegometall, is offered. the frames of these shelves are deep approx. 2.80 m wide ca 2.18 m high 1.25 m In conjunction with Tegometallwand -, or gondola shelves, they are excellent for loading equipment. As they complete with chipboard, above it still reserves can be stored. The inner shelves can be equipped optionally with smooth or perforated walls, floors, bins, hooks, etc. so that they can be used for merchandise of any kind. Without this inner life they are storage racks, E.g. for the storage of larger materials and pallets. A double box with interior shelves is included in the offer, i.e. 3 red double frame (2.18 m high; 1.25 m deep, together approx. 5.60 m wide) with the necessary trusses and bridges of depth for each field a white double support backs, optional perforated, smooth or mixed for 4 fields  ...

Scissors: for flat steel: 80 x 10 mm Shear: For L & t 90 / 45 ° 70 x 70 x 7/50 x 50 x 6 mm Rod steel scissors around until: 28 mm square up: 25 mm Notching device for material thickness up to: 7 mm Drive motor: 380 V, 1.3 kW Weight: 400 kg Space: 1000 x 650 x 1480 mm

Filter cloth holder / Towel holder Material PP NEW available for all Kammerfitlerpressen / filter presses Other spare parts on request

Price per piece; approx. 14 x conveyor belts rubber: approx. 0.50 m wide, approx. 6m long were electrically driven All prices are understood from station Europe and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own expens ...

Used roller mill made by SPOMAX Polska, typ RUD-11/8. New 2002. Depending on the crushed raw material yield is 100-2000 kg (mean 1000 kg). The mill has two pairs of milling rollers. 7.5 kW motor. Overall dimensions: height 2030 mm, 755x890 mm base. Weight 680 kg.

Sale due to restructuring. Stainless steel ventilation Tower 4700 mm, diameter height approx. 1250 mm, material stainless steel Tower now available. Loading with a forklift Questions under 02131 / 4064849 Mr. Rössler

All in one reactor . Material: Stainless steel 1.4571 Drive: 4 kW Volume container: 50 ltr. Volume casing: 10 ltr. Pressure inside: - 0.97 / + 3 bar Outside pressure: 5 bar Temperature: 180 ° C; Weight: approx. 2000 kg Length x width x height (mm): 2200 x 1620 x 2065 Machine in excellent condition!

Volume: 400 ltr. Material: Stainless steel

Thermal store / buffertank with a nominal capacity of 40,000 litres on 2 steel bases. Contents: approx. 40 m³ / 40,000 litres Material: steel Diameter with insulation: 2.75 m Diameter without insulation: approx. 2,50 m Year built: approx 2007 Buffer in cylindrical shape. Insulated by mineral/glass fibres, 10cm thick. Panels are made of aluminium sheets. The container is in used state, and has been drained and cleaned professionally. The heat storage tank has a separate connection pair (forward / reverse) for the heat supply (E.g. from CHP, boiler) and heat extraction (e.g. from a heating network). Thus, a real buffering is possible, and a temporary extraction higher than the thermal power of the heat generator, eg. to deal with heat peaks. Optionally and at additional cost more pairs of connection can be installed to connect another heat generator to this buffer. Flanges  ...

VA Tube Bundle WT Manufacturer: E. Gessner AG, built 1982, material 1.4465, 1.4571, Dimensions: Diameter Coat: 600mm Effective Length Pipes: 5000mm Di-inner tube: 20mm Da inner tube: 24mm Total length 5880mm Total height: 1000mm Connections Coat: DN 200 Connections Pipe side DN 50 Foot distance (holes) 3000mm Transmission area: 65m2 / 78m2 (indoor/outdoor) 208 inner tubes Ab. Pressures: -1 / 3 bar inner tubes -1 / 6bar coat Temp range: -10 / +200 Price refers to a heat exchanger. 2 present

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

Fully automatic conveyor belt made of stainless steel including water supply and height adjustment function Manufacturer: Solia Material: 1.4301 (V2A) Dimensions: Length: 3.80 m Width: 1.20 m Frame height: 80 cm Height with funnel: 1.20 m The conveyor belt was originally mounted on a potato peeling machine. It has several tracks to sort the potatoes. However, it is suitable for almost all types of bulk materials. Furthermore it has a funnel through which enters the bulk material on the band. However you can easily disassemble the frame where the funnel and the tracks are welded on.You can easily loose the frame with the help of the star head screw. The conveyor belt was hardly used and is very high quality! Therefore in a very good condition!

The synchronous generator Flash 2500 S is in good condition, ready to use. Built in approximately 1997 Weight 36 kg 230 V, 50 Hz, 9.7 A 2 kVA 3000 min IP 23 Altitude 100 m above sea level. NN Ambient temperature 27 � C Radio interference level DIN 57875 spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Used appr. 100 m³ / 100,000 litres steel tank, single-walled, top condition, aboveground storage tank, on 2 bases, water tank, firefighting tank, water cistern. volume: 100 m³ / 100,000 litres material: steel tank dimensions: appr. Ø 3.0 m x 16 m long weight: appr. 15.0 t painted white outside, pure steel inside The container is used, has been emptied and professionally cleaned inside. According to the age traces of use are present. The container / steel tank can be used as storage tank for many different media. Upon request we can coat the inside with a food-suitable paint or rework the tank into a firefighting tank or otherwise to suit your demands, just ask us. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has alrea ...

Used lifting column unloader of the trays with a mechanical device used to unload the container process granules distributed on trays. The device is equipped with a shredder granules. The device has a complete DTR manufacturer. Specifications: max. capacity: 160 kg Tray size: 35x600x1000 mm max. number of trays: 8 max. process container height: 1300 mm prod.1997 year max. External dimensions: height. 3080 mm, width. 1550 mm, 1820 mm length Material: AISI 316 / AISI 304 implementation class: EEx e II T 3

ABB Arc Guard TVOC-2-240 Arc Flash Guard COMPLETE SET Built 2012 The new retail value for these parts is Euro 8500,- Like new, only been used for 3 years. 6x complete set available. -- TVOC-2-240 - ABB TVOC-2-240, ARC MONITOR W/HMI, 100-240VAC/DC The Arc Guard TVOC-2 builds on the well-appreciated TVOC design and offers unmatched arc monitoring. With over 35 years of experience, Arc Guard System has become an industry standard in several key markets, helping to protect personnel and businesses around the world. The TVOC-2 is an optical detection system that together with an external breaker can limit the damage done to personnel and equipment in case of an arc accident happening. Main benefits Increased safety to personnel and equipment Minimizes downtime after arc accident has happened Easy-to-read interface makes reading status information quick and easy Simp ...

From the current promotion we offer cheap 20ft first trip containers! Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof plywood panels made of hardwood. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can therefore be easily lifted and implemented without damage by means of forklifts, i.e. no crane is required for lifting. Due to their massive and weather-resistant design and the fact that sea containers are manufactured according to ISO and CSC standards, they are perfectly suited as storage, material or workshop containers and can be sold again, especially after many years of use, almost without any loss of value. TECHNICAL DATA / TECHNICA ...

Inclined lift with motorized winch (7.5 kW / 36 UPM), lifting bucket (1,000 l. usable volume), weighing frame / foot station (2,000 kg max.), 25 m rope and head station for material transfer. Rope and SEW winch drive are new; Elevator was used to feed an Eirich intensive mixer type R(V) 18. Technical documentation is available.

Material: Stainless steel 1.4541 Weight: 350 kg Dimensions L x W x H: 1730 mm x 500 mm x 800 mm; 2 machines available.

The laser device series NBL, consistently adaptable to your needs, allows you this economic and durable engraving of single pieces and small series, directly from the computer. Ideally suited for medical instruments, devices and transplants. No consumables. In a special process you can even mark glass - instant - durable. So, you can mark on your products easy and flexible variable data, for example a 2D barcode, or QR code in the highest quality. Also plastics are possible, like E.g. an attractive customer card, with photo or graphics, in brilliant quality. Laser marking is resistant to abrasion, penetrates deep into the material and thereby effectively resists tampering attempts and adverse effects due to environmental influences, to a large extent. Only a standard PC (not included) is required for the Operation where the software supplied is running to operate the laser.  ...

SOMOS centrally controlled conveying system with micro-processed graphic display Automatic control of up to 32 injection moulding machines completely overhauled with 1 year guarantee Material conveyor, filter unit and blower with several accessories, as well as spare parts package can be offered on demand

Material: Stainless steel Drive: 35 / 50 KW

C arc Siemens Siremobil ISO - C to give

1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min

SOMOS centrally controlled conveying system M40 with micro-processed graphic display Automatic control of up to 40 injection moulding machines completely overhauled with 1 year guarantee Material conveyor, filter unit and blower with several accessories, as well as spare parts package can be offered on demand

Material: mild steel Reel in stainless steel;

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...

Material: Stainless steel Drive: 9.9 KW Volume: 356 ltr. Boiler: Max. Operating pressure: Chamber 3 bar - 1 bar / Heiraum: 4 bar; Max. Operating temperature: utilizable space: 143 ° C / boiler room: 151 ° C; Content usable space: 330 ltr. Capacity heating: 26 ltr.

mechanical dryer drive 90 kW BRAND NEW MACHINE centrifugaldryer for surface drying of the material fraction primarily for film flakes, granulate from PET bottles and other rigid types of plastics.

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...

On 4 castors-standing stainless steel mixing tank with propeller agitator Material: V2A (1.4301) Container has a hinged lid and a spout at the bottom with a valve DN 25 drawn forward. In very good condition!

Machine type: friction washer / friction separator Manufacturer: NEUE HERBOLD GMBH Year of manufacture: NEW rotor diameter: 560 mm working length: 3000 mm Drive: 30 kW for integration in recycling processing plants - to wash plastic materials such as film flakes, foil chips, granules, PET bottle-flakes,...

Koelle edge planing machine model FKF 51 is in good condition, ready to use. L x W x H = 3000 mm x 700 mm x 950 mm Weight approx. 200 kg Built in 1982 Engine No. 390 The rubber rings at the pressure rollers should be times replaced. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

CNC plasma and cutting machine SATO SATRONIK FB 2000 2,000 x 4,400 mm plasma system Kjellberg HiFocus 100, (up to 25 mm quality cut), cutting max. 40 mm, 12 mm laser cutting quality, plasma burner PerCut 170 (quick change system), THC / automatic capacitive. Hoehenregulation with Kemper suction firing table 1.5 ( 2m) x 4.0 m and suction and filter unit Price: VB The plant is located at the Bochum plant Alternative plasma cutting plant Kjellberg FineFocus 800: plasma cutting system for attachment/re-training of CNC plasma cutting systems FineFocus 800 Plus Materialstaerke: up to 80 mm, Hole cutting and quality cutting up to 45 - 50 mm, gas console type PGE 3-800 (Kjellberg) - Description of the plasma cutting source (see appendix) Year of construction: Dec. 2005 (commissioning 2006) Condition as new (new price of the plant 46,327.70 EUR) Price option with gas console, mac ...

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

approx. 40 m³ / 40,000 litres steel tank, aboveground storage tanks, 2 steel bases, former palm oil tank, outer side newly painted (color may vary from the picture). As underground tank the tank will be painted with black Bitumen on demand. Contents: approx. 40 m³ / 40,000 litres Material: Steel Length: 9,00 m Diameter: 2,50 m Year of manufacture: 2007 The container is used, has been emptied inside and professionally cleaned. According to the age there are traces of use. Can be used as a storage tank for water, liquid feed, manure, whey, potato steam skins, molasses, seeping juice, canola oil, palm oil, or as a rainwater storage tank, firefighting water tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory ...

? The machine is built in 2 construction works: 1250 x 2500 and 1500 x 3000. ? The IPG fiber laser resonator is available for this model with the power values 500 W, 1000 W, 1500 W and 2000 W. ? The beam is guided by a flexible light guide, i.e. cleaning and alignment of the mirror optics are not required. ? The HP SSL high-performance cutting head is very easy to set up. ? High cutting efficiency with low operating costs; Power consumption of only 13 kW for a 1-kW fiber laser source. ? The heavy machine frame and the high-stiff bruecke are designed as a tension-free welded construction and carefully manufactured. ? The interchangeable table with hydraulic lifting adaptation takes over the loading and removal of cut parts during the ongoing cutting process - re-training with further automation functions is possible. ? The working area is fully clad and illuminated, and the cutting ...

Artec mini table lathe C2x300 tips size 300 mm + 8 PCs chisel set Mini table lathe C 2 and 8 PCs. HSS cutters set now in the Westfalia savings Kit. C-2 the spindle speed variable from 200-2500 RPM via a potentiometer is adjustable at the mini lathe. About a 80 mm three-jaw chucks can be clamped workpieces easily. The workpieces can be supported with a tailstock with MK 2-recording. By a quad-steel holder the cutters can be secured, designed for 8 mm cutters. Also thread can be cut with this mini lathe 1.5 mm pitch. All materials with normal strength can be edited. (Aluminium brass steel). Technical data: centre height 90 mm centre distance 300 mm spindle bore 19 mm tailstock intake MK-2 thread cutting range 0.2 1.5 mm speed range 200-2500 U / min variable power 250 Watt/230 V Plan route 65 mm Oberweg sled 55 mm Quill trail 50 mm Dimensions Lxwxh approx. 700  ...

Plasma cutting system with possible welding processes: plasma cutting, firing joints; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals and arc welding Source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) Multiple frequencies 50/60Hz burner: CPM 250 (flat electrode) cutting process under water Plasma cutting cutting speed approx. 8m/min. Marking via compressed air driven drills Equipment: rails; Control cabinet; Cutting portal; Tub; Burning pads; 1x Torch Machine dimensions: cutting system: L:4,40xB:2,30xH:1,80m Cutting tables: L:8,44xB:3,31xH:0,85m 2 pcs. Plasma generator connected in parallel Nertajet HP 120: L:0,83xB:0,65xH:1.3 3m Track 1: L:10,650xB:0,25xH:0,92m Left Side Track 2: L:10,650xB:0.25xH:0.57m Right Side Factory conditions:L:3,120xB:1,36xH:0,14m (5 pcs. for cutting table) Water tank: D=1100mm H=2000mm / 1 pc. storage pl ...

approx. 70 m³ / 70,000 litres polyester tank, upright standing flat bottomed tank, above ground, with multiple connections and spouts. volume: approx. 70 m³ / 70,000 litres material: polyester / GRP diameter: approx. 3.00 m tank height: approx. 10.00 m overall height: approx. 10.50 m The tank has been newly painted and is in a good condition. The container can be used as a storage tank for liquid feed, whey, molasses, water, slurry, or as rain drip tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offer ...

MicroStep CNC guide machine AQUACUT 3001.15 W working area (3000mm x 1500 mm) high pressure pump: KMT Streamline Pro I 60 S, 6200 bar cutting up to 300mm only 4 000 operating hours Including osmosis water treatment system (12,000,- Euro) The AQUACUT is a robust and very practical CNC guide machine in portal construction, specially developed for continuous use in water jet cutting. The high dynamics of the system are overpowered by a low-set machine portal, digital DC servo motors with play-free transmission and practical, stainless linear guides in all three axes. In combination with an HD pump, the AQUACUT can be used to cut solid metals, hard rock, marble, armoured glass, ceramics, plastics, corrugated board, foams, as well as composite materials. assembly and commissioning on request. ; ready for immediate use

Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.