1 mw gas used for sale

Key data: 300

JENBACHER 208 300 kW Generator Set. The J208 engine is in excellent condition. The previous owning company completely rebuilt the engine for a project that was canceled when the company closed and went into liquidation. The engine can operate with Natural Gas, LPG and Syngas as it is. Year: 1994 Hours: 60.000 Capacity: 300 kW Hz: 50 Voltage: 400V Scope of supply: engine, alternator. - CONTROL SYSTEM NOT AVAILABLE - We have verified the authenticity of the engine rebuild through an on-site inspection. An endoscopic examination indicates that the pistons, cylinder liners, con rods, and bearings have been replaced and are new. There is no sign of wear or previous combustion in the cylinders. The alternator's bearings have been replaced too. The endoscopic photos show that the turbo has also been replaced, and the intercooler grille is new. An external check reveals  ...

Gas flow controller TYLAN MILLIPORE FC-2910V-4V Dimensions: 125 x 125 x 40 mm

Gas Analyser TRAILIGAZ TLG.M AFX IN2000-5 Dimensions: 490 x 460 x 250 mm

solenoid gas valve JOHNSON CONTROLS SA 432 KVS 401 normal to DN 1 1/2 p max: 0.2 bar 220 V New ! Dimensions: 420 x 220 x 260 mm

Jenbacher J620 GSE12 3119 KW 59.000 hours LSA 54 UL95-4P alternateur 6300volt manufacture year 2004 Scope: engine alternator gas-street Diane-XT panel heat exchanger

Gas type :Biogas 1063 kw WORKING HOURS 23.000 MAINTANED AND WORKED 2500 HOURS AFTER MAINTANENCE. SYSTEM TYPE ITM, ENGINE JENBACHER WITH CONTAINER

Gas type :Biogas 1076 kw WORKING HOURS 40.000 MAINTANED AND WORKED 3500 HOURS AFTER MAINTANENCE. SYSTEM TYPE JENBACHER, ENGINE JENBACHER WITH CONTAINER

Sample gas pump, vacuum pump BÜHLER P2. 2 ATEX 426112119900RP 001 100149228 Material: PTFE, PVDF Motor: ATB ENBFY63/4C-11 0.09 kW 1440 rpm 220 - 240 V 1AC explosion-proof ! used, checked ! Dimensions: 290 x 190 x 240 mm

Gas pressure regulator GASELAN Type: GSDL-B Schl.-Nr EL 135 653 451 Type: L-M Schl.-Nr EL 135 53 450 Pa: 30 mmWs (3 mbar) Pv max: 500 mmWs (49 mbar) NW 50 New Dimensions: 380 x 310 x 400 mm

Gas pressure regulator with filter DUNGS Type: FRS 515 5 - 20 mbar pmax: 0,,5 bar Filter: WEISHAUPT Type: 515/1 pmax: 0.5 bar PN 1 DN 1 1/2 used, tested ! Dimensions: 480 x 200 x 270 mm

Key data: 1600 KW, 400 V

MTU gas engine 2010 Running hours 50K from new All auxiliaries with the engine Cylinder Heads replaced at 44k in2022 Liners & piston replaced at 32k in 2021 Service report

Gas pressure switch, pressure switch HEGWEIN STUTTGART Type: FD2K1-7 Setting range: 5 - 70 mbar Operating pressure: max. 300 mbar connection: 1/4 ( inch ) switching voltage: 220 V AC, 50 Hz IP54 used, tested ! Dimensions: 130 x 125 x 110 mm

Gas meter KROMSCHRÖDER BK4T Qmax: 6 m3/h Qmin: 0.04 m3/h pmax 0.1 bar 2x connection piece, distance: 250 mm connection thread: 11/4 ( inch ) Connection inner diameter: 32 mm used, tested ! Dimensions: 330 x 165 x 240 mm

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

Pressure regulator manually adjustable, pure gas regulator DRUVA Type: LMD-500-01 Inlet pressure: max. 50 bar outlet pressure: 0.5 - 6 bar stainless steel ! Dimensions: 125 x 115 x 50 mm

Pressure regulator manually adjustable, pure gas regulator DRÄGER TESCOM type: 44-3262-242H283 Inlet pressure: max. 35 bar outlet pressure: 0 - 35 bar stainless steel ! Dimensions: 135 x 135 x 70 mm

Pressure regulator manually adjustable, pure gas regulator DRÄGER TESCOM Type: 44-2260-242-010 Inlet pressure: max. 27 bar outlet pressure: 0 - 1.7 bar stainless steel ! Dimensions: 120 x 120 x 90 mm

Solenoid valve fuel gas MERTIK MV 10.2.4 Pn: 0.15 MPa (1.5 bar) nominal diameter: 10 mm (NW10) Screw connection: 1/2 Coil: 220 V AC 50 Hz IP55 New ! Dimensions: 100 x 90 x 80 mm

Pressure regulator manually adjustable, pure gas regulator DRÄGER TESCOM Type: 44-2262-242-009 Inlet pressure: max. 27 bar outlet pressure: 0 - 7 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

Pressure regulator manually adjustable, pure gas regulator DRÄGER TESCOM Type: 44-2261-242-010 Inlet pressure: max. 27 bar outlet pressure: 0 - 3.5 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

Hot gas welder, multi-stage SCHLOMA ZIS-487/2 200 / 400 / 600 W 220 V AC approx. 2.8 m connection cable suitable air supply - see LU235 ! New ! Dimensions: 470 x 200 x 50 mm

Capacity 1500 kw Gas type : Biogas With container Engines not used

Steam boiler Loos with Weißhaupt gas burner Type: U-ND 500 capacity: 500 kg steam/h Max. operating overpressure: 1 bar Test overpressure: 2 bar Water capacity full approx.: 770 l year of construction: 2003/2004 CE-marking: 0036 incl. hot water tank with condensate pump

Key data: 727 , 400

MWM TCG2016 V16C Biogas Generator Set. Make and model: MWM TCG2016 V16C Capacity: 727 kW Fuel: Biogas Year: 2008 / new engine block 2019 Hours: 10,000 HZ: 50 V: 400 Scope of supply: Engine, Alternator (Marelli - 2017), Cooling Unit (Hitema), Control Panel (TEM EVO), Gas Line, Transformer, Container, Radiator. In 2019, New Engine, Turbo, Intercooler, Electrical equipment (sensors etc), were installed. Alternator is from 2017. Price: Please Apply

Shock absorbers, gas springs, shock absorbers, start-up dampers, industrial shock absorbers -Manufacturer: ACE Controls, industrial shock absorbers -Type: A 11/8 x 4 -Tube: Ø 76 mm -Shaft: Ø 19 mm -Price: per piece -Number: 4 piece -Dimensions: 345/140/H90 mm -Weight: 6.9 kg/piece

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Price: per piece -Number: 3 pieces -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Air bellows, roller bellows, air cushions, spring-loaded brake -Gas bottle holder -for: 33.5/43.5 Lbs -Hole spacing: 115/75 mm -Weight: 3.2 kg

Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg

Shock absorbers, gas springs, shock absorbers -Shaft: Ø 50 mm -Shaft length: 28 mm -Bore: M8 -Number: 5 pieces available -Price: per piece -Dimensions: 95/170 mm -Weight: 6.6 kg/piece

Shock absorbers, gas springs, shock absorbers -Shaft: Ø 35 mm -Shaft length: 28 mm -Bore: M8 -Number: 8 pieces available -Price: per piece -Dimensions: 75/160 mm -Weight: 3.8 kg/piece

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers -Tube: Ø 82 mm -Total length: 510 mm -Recording hole: Ø 24 mm -Number: 2 pieces of shock absorbers available -Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Shaft: Ø 39 mm -Shaft length: 470 mm -Recording hole: Ø 17 mm -Number: 4 pieces of shock absorbers available -Price: per piece -Dimensions: 1755/140/H100 mm -Weight: 24 kg/piece

Man Brand, 450kva, year 1998 Very good condition unit. Scope of supply items: Complete engine and alternator on skid with Gas street and PLC type panle, with heat recovery & Water Pump available.

Waukesha h24gld with Stamford Alternator. Year 1996, 500kva, 400volt, 50hz. ( Scope of supply items: Complete engine and alternator on skid with Gas street and PLC type panel with one water pump together...)

Man Brand, Power 250kva, year 1996, Very good condition unit. Scope of supply items: Complete engine and alternator on skid with Gas street and PLC type panle available.

Man Brand, 270kva, year 1999, Very good condition unit. Scope of supply items: Complete engine and alternator on skid with Gas street and PLC type panle, with heat recovery available.

Gas filter KROMSCHRÖDER GRP 20R40-4 81936100 installation length: 92 mm connection internal thread: 3/4 ( inch ) Pmax.: 4 bar T: -15 °C - +80 °C Material ( housing ): Aluminum alloy ( ALSi ) used, tested ! Dimensions: 91 x 88 x 90 mm

Differential gas / air pressure monitor KROMSCHRÖDER DG50UG-3 84447370 setting range: 2,5 - 50 mbar ( 0.0025 - 0.05 bar ) operating pressure: max. 600 mbar ( 0.6 bar ) connection: 1/4 ( inch ) / 1/8 ( inch ) ( female thread ) switching voltage ( AC ): 250 V AC, switching current: 5 ( 1 ) A switching voltage ( DC ): 12 - 24 V DC, switching current: 0.1 ( 0.05 ) A IP54 T: -15 °C - +80 °C used, tested ! dimensions (without cable): 88 x 77 x 70 mm

Gas pressure regulator KROMSCHRÖDER GDJ15R04-0 03155021 installation length: 100 mm connection female thread: 1/2 ( inch ) P: 22 - 40 mbar ( 0.0 022 - 0.04 bar ) Pmax.: 400 mbar ( 0.4 bar ) D: -20 °C - +70 °C Material ( housing ): Aluminum alloy ( ALSi ) used, tested ! Dimensions: 100 x 100 x 123 mm

Gas pressure regulator KROMSCHRÖDER GBF/VGBF 40 75422020 installation length: 90 mm connection female thread: 1 ( inch ) P: 85 - 105 mbar ( 0.0 085 - 0.105 bar ) Pmax.: 1 bar D: -15 °C - +60 °C Material ( housing ): Aluminum alloy ( ALSi ) used, tested ! Dimensions: 190 x 190 x 282 mm

The AJAN SHP 260 A plasma cutter was built in 2010 in Turkey. The machine is in continuous operation. I am selling due to upgrading to a newer model. Characteristics of the AJAN SHP 260 A plasma cutter - cut materials: structural steel, stainless steel, aluminum - maximum cutting speed: 15 m/min - maximum sheet size (length x width): 6 x 2 m - minimum cutting thickness (structural steel): 0.5 mm - maximum cutting thickness (structural steel): 60 mm - minimum cutting thickness (stainless steel): 0.8 mm - maximum cutting thickness (stainless steel): 20 mm - minimum cutting thickness (aluminum): 1.2 mm - maximum cutting thickness (aluminum): 25 mm - total power requirement: 52 kW - power of the plasma source: 260 A Equipment of the SHP260l plasma burner - CAD/CAM software: AJANCAD, Lantek Pulsar - machine plasma source: AJAN PP 260 A - autopsy and extraction table with ...

CATERPILLAR Gas Genset, Engine G3516A Power 1000KW / 1250kva. Run Hour around 42k since new, HZ 50, Volt 400, RPM 1500 Year 1998

Caterpillar 3516B Gas Generator set only Engine + alternator on Skid available for sale.

Hainzmann STG2080 GAS GENERATOR FUEL CONTROL SYSTEM WITH Butterfly Available in stock.

Man 50kva gas generator set in Canopy available in stock.

Pressure regulator manual adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-3262H283-001 inlet pressure: max. 35 bar outlet pressure: 0 - 7 bar stainless steel ! as good as new ! Dimensions: 140 x 140 x 100 mm

Used gas compressor Mehrer TRE 700 from a Malmberg pressurized water wash. Approx. 110,000 operating hours. Functionally expanded. With valves and pulley.

Key data: 305

Complete Containerised Jenbacher 208 landfill generator. Make: Jenbacher Model: 208 GS CO2 Power: 305 kW Hours: 15,000 Year: 2003 HZ: 50 V: 400 Fuel: Landfill Scope of supply: Container, engine, alternator, control panel, gas line, oil tank, radiator, piping plus other ancillaries. Price: Please Apply

Kawasaki Model TD80A-1 7.2 MW Type TD80A Rated Output 7216 kW Voltage 11000 V Frequency 50 HZ Current 446 A Phase 3 Gas Turbine M7A-03D Generator NTAKL-DC YOM 2011 low hours 7836