macchi 押 出 機 中古 販売のため

MACCHI 3-LAYERS BLOWN FILM EXTRUSION LINE, for LLDPE/LDPE/HDPE, n.3 extruders with infra-red heaters (for energy saving), Screws Ø 65+80+65 mm, n.3 sliding plate screenchagers, Macchi Die head TE5303-IBC-350/500, Available dies Ø 350 and 400 mm gap 1,8 mm., IBC bubble cooling system, dual-flow, carbon fiber air ring, throughput rate up to 800 kg/h depending on material and recipe, 2.400 mm wide oscillating pull off unit, Motorized side gusseting units, Double, 2.350 mm wide fully automatic back-to-back winding station with fully automatic reel change, Max reel Ø 800 mm, including the following:, Tower, E&L Web guide, Gravimetric weight control system Piovan/Doteco, Components blander Shini, Doteco dosing units, Automatic Thickness control Kundig/K-Design Profile gauge control system, Calibrating basket, Martignoni Corona-treatment, N. 8 Air shafts, Constructed under Covid, started in  ...

The Macchi 3 layer Film Blowing Machine PLASTEX model is a compact line for a top quality film production with a range up to 350 kg/h and a film width of 1.650 mm. This production line of 3 layer co-extrusion blown film extruder produced by MACCHI can be used for the production of a wide range of general packaging films as it allows to achieve a high output and a significant level of productivity and flexibility.

MACCHI 3-LAYERS BLOWN FILM EXTRUSION LINE, for LLDPE/LDPE/HDPE, n.3 extruders with infra-red heaters (for energy saving), Screws Ø 65+80+65 mm, n.3 sliding plate screenchagers, Macchi Die head TE5303-IBC-350/500, Available dies Ø 350 and 400 mm gap 1,8 mm., IBC bubble cooling system, dual-flow, carbon fiber air ring, throughput rate up to 800 kg/h depending on material and recipe, 2.400 mm wide oscillating pull off unit, Motorized side gusseting units, Double, 2.350 mm wide fully automatic back-to-back winding station with fully automatic reel change, Max reel Ø 800 mm, including the following:, Tower, E&L Web guide, Gravimetric weight control system Piovan/Doteco, Components blander Shini, Doteco dosing units, Automatic Thickness control Kundig/K-Design Profile gauge control system, Calibrating basket, Martignoni Corona-treatment, N. 8 Air shafts, Constructed in 2011 started 2012, Ex ...

Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulates Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 μm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi's; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET  ...

Materials: LDPE, LLDPE, HDPE, MDPE, mLLDPE // Film Width (Max): 1100 mm

GENERAL DESCRIPTION: The Macchi 3-Layers E18 is a high-capacity blown film co-extrusion line intended for production of general-purpose films with high width and output demands. It processes LLDPE, LDPE, mLLDPE, MDPE, HDPE, and in upgrade configuration also PP. The system uses a 700 mm 3-layer die head and reaches an output capacity of up to 900 kg/hour, depending on formulation. EXTRUSION GROUP: • Extruders: 80 mm + 100 mm + 80 mm • Infrared heating • Hydraulic screen changers Detailed upgrade specification: • One extruder Plastex 100/30D (middle layer B) • Two extruders Plastex 80/30D (layers A and C) • Bimetallic barrels • Nitrided screws • Water-cooled grooved feeding sections • 5 heating zones with IR heaters and blowers •Engine: - 150 kW DC motor (100 mm extruder) - 100 kW DC motors (80 mm extruders) • AC motor application with digital control  ...

Key data: 65 mm

Qty. 1 Second-hand 3-Layer Co-Extruder Line Brand & Model: MACCHI 3-layer co-extruder Built: 2012 Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3 Layer blown film Die head TE5303-IBC-350/500 Dies diameter 350 and 400 mm IBC Die Gap: 1.8 mm Output: Up to 800 kg/hour depending on material formulation Air ring: Dual flow air ring carbon fibre Take off: Take off 2400 mm wide Oscillating nips Motorised side gusseting Rewind: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reels diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide E&L Components blander Shini Gravimetric weight control system Piovan/Doteco Dosing units Doteco Automatic Thickness control Kundig/K-Design Profile gauge control system Calibrating basket Corona-treat ...

This grinder has 2 fixed knives and 15 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

This shredder has a large diameter rotor (30 cm) and 12 rotating blades. The motor has an output of 4 kW. This shredder is equipped with a torque increase gear (reducing gear), so it is also suitable for shredding thicker plastic waste. The grid is interchangeable, so the grain size can be changed. Everything works fine, motor, bearings, gearbox, rotor, blade are all fine. It can be used immediately. I have several of them. Other shredders are also for sale. Please see my other ads.

This grinder has 1 fixed blade and 3 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

Guillotine-type mechanical shear for cutting plastic sheet in industrial processes. Brand: Jwell Cutting width: 1440 mm Maximum thickness: up to 6 mm Geared motor: 7.5 hp (5.5 kW) Type: Mechanical Guillotine Applications: - Cutting rigid or flexible plastic sheet - Post-process extrusion - Plate and film production - Preparation for thermoforming

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

Key data: 340 mm, 700 mm

available 27" Mill Description Attached!