kuhne 押 出 機 中古 販売のため

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

The original part is a main and KO extruder from Kuhne built in 2006, the system was extended in 2010 by an additional extruder from the SML (coating unit). Plant description: COEX cast film line with additional coating unit. The main plant is equipped with a co- and a main extruder. The coating unit with a main extruder. Processing of thermoplastics in a processing range of 90-300°C. The system can be operated with the following combinations: • Main unit (CoEx system) with coating unit • Main unit (CoEx system) without coating unit • Only coating unit with unwinding unit for carrier film For operation in the various combinations, the corresponding additional units are switched on or off. Possible layer structures: Main plant: - Monofilm with release film if required - 3-layer film (A-B-A) with release film if required Coating: - Monofilm on carrier material if req ...

A 13-layer blown film line Kuhne for the production of biaxially oriented high-barrier films is available. Film thickness range: 20µm-80µm, max. film width: 1400mm, max. output capacity: 400kg/h, extruders: 13 units, max. die head pressure: 500bar, flex ring die: 250mm/300mm, calibration tools: 200mm/225mm/250mm/280mm/300mm, yield: 80%-90%. Laminating films: sealing layer thickness: 25µm-35µm, printing layer thickness: 25µm-45µm. Monofilms: shrink lid thickness: 23µm-28µm, AF lid film thickness: 25µm-45µm, top and bottom film thickness: 75µm, balloon film thickness: 25µm-31µm. Documentation available. An on-site inspection is possible.

This KUHNE KS45-24D compounding extruder was manufactured in 2006. Ideal for processing a variety of materials, it offers robust construction and reliable performance. Consider the opportunity to buy this KUHNE KS45-24D compounding extruder. Contact us for more information.

Deze extruder lijn van Kuhne staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 2008 en verkeerd in prima staat. Merk: Kuhne GmbH Model: K 60E - 33D Typen schroef: enkelschroef Bouwjaar: 2008 Schroef Ø: 600mm L/D-verhouding: 33 Hoogte cyclinder: 425 mm Bls Ud Dou Etygevycep Kegelhoogte: 325 mm Total height: 750 mm

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

This shredder has a large diameter rotor (30 cm) and 12 rotating blades. The motor has an output of 4 kW. This shredder is equipped with a torque increase gear (reducing gear), so it is also suitable for shredding thicker plastic waste. The grid is interchangeable, so the grain size can be changed. Everything works fine, motor, bearings, gearbox, rotor, blade are all fine. It can be used immediately. I have several of them. Other shredders are also for sale. Please see my other ads.

This grinder has 2 fixed knives and 15 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

This grinder has 1 fixed blade and 3 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

Guillotine-type mechanical shear for cutting plastic sheet in industrial processes. Brand: Jwell Cutting width: 1440 mm Maximum thickness: up to 6 mm Geared motor: 7.5 hp (5.5 kW) Type: Mechanical Guillotine Applications: - Cutting rigid or flexible plastic sheet - Post-process extrusion - Plate and film production - Preparation for thermoforming