Unité pivotante d’angle, précision 0.01, SW100D4-C, pièce, neuf Prix spécial Nous avons encore plusieurs dispositifs identiques et autres, mais le montant se termine. Achetez plus de 1 pièce, il y a toujours une grande réduction. Si vous avez un numéro de TVA, nous serons heureux de vous émettre une facture sans TVA. Comme neuf dans l’emballage d’origine! La pièce a été achetée dans un entrepôt de pièces de rechange d’une entreprise et n’a jamais été en service, est complètement neuve et dans son emballage d’origine. Angle de pivotement 180 [] Couple 15 [Nm] Répétabilité +/- 0,01 [] Temps de panoramique 0,5 [s] Trou traversant 15 [mm] Charge portante axiale 2500 [N] Charge portante radiale 155 [Nm] Pression de service min. 3 [barre] Pression de service max. 8 [BAR] Température de fonctionnement 5 ... +80 [C] Volume de la bouteille ...
Sécheur à jet à air chaud, Énergie : gaz naturel Station de revêtement MAGNOROLL RMR-GMA/F/417 Refroidisseur Rouleau de manget de rechange Réservoirs pour le mélange et le stockage préliminaires, selon les besoins Si nécessaire, un RTO pourrait également être proposé, Énergie : Gaz naturel Pour des largeurs de 2 m, jusqu’à 40 m/min L’usine est sur place et doit être démontée. La base de la négociation est un démantèlement de récupération des coûts. Des composants individuels peuvent également être vendus.
cutting diameter: 185 mm saw band length: 2.085 x 20 x 0,90 mm table height: 915 mm band speed: 35/70 m/min capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150 mm capacity 90 degrees: flat: 220 x 150 mm connected load frequency: 400 V total power requirement: 0,8 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 220 mm saw band length: 2450 x 27 x 0,9 mm table height: 915 mm band speed: 35 + 70 m/min connected load frequency: 400 V capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use. ...
Diamètre de coupe 220 mm Longueur de la lame de scie : 2450 x 27 x 0,9 mm Couleur : gris Puissance totale requise : 1,2 kW Largeur de la bande de scie : 0,9 mm Vitesse de coupe : 35 + 70 m/min Plage de coupe à 90 degrés : environ 220 mm Plage de coupe à 90 degrés : carré 220 mm Zone de coupe à 90 degrés : plat 230 x 185 mm Plage de coupe à 60 degrés : carré 90 x 90 mm Plage de coupe à 45 degrés : environ 150 mm Zone de coupe à 45 degrés : carré 150 x 210 mm N° de machine 4777230
nouveaux
capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 mm : 165 x 310 mm saw band length: 2.725 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: 1,1 kW weight of the machine ca.: 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 105 mm saw band length: 1140 x 13 x 0,65 mm cutting width: 100/100x105 mm capacity 60 degrees: round: mm capacity 45 degrees: flat: 55 x 55 mm capacity 45 degrees: round: 60 mm total power requirement: 0,18 kW weight of the machine ca.: 18 kg dimensions of the machine ca.: ca.400 x 300 x 350 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...
capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: kW weight of the machine ca.: 0,35 t The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
