10 YKS 出售二手机械设备

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 11000 € : 211.2 € : 1000 kg : 150 mm : 150 mm : 360 kgm : 230 / 50 V / Hz : 0.55 kW : 0.75 kW : 0.1 - 3 U/min : 60 s : 1200 mm : M20X6 mm : 1000 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operat ...

: neu : 2025 : 020177 : prompt, Zwischenverkauf v : Türkei : 880 € : 1 : 50 kg : 0,05 to : 30 mm : 700 mm : 100 mm : 80 mm Without drive, idling rollers Manual adjustment of the centre distance The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 8700 € : 167.91 € : 10000 kg : 5000 to : 750 mm : 4500 mm : 300 mm : 2 x 70 mm Conventional rotating fixtures are preferred in areas such as welding, painting and paint preparation, due to their cost-effective design and ease of integration. They are manufactured as standard with capacities ranging from 1 to 150 tons. Roller material: Polyurethane Capacities up to 500 tons are also possible upon request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 24400 € : 468.48 € : 3000 kg : 150 mm : 150 mm : 360 ° : 135 kgm : 400 / 50 V / Hz : 1.1 kW : 1.1 kW : 1200 mm : 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 7730 € : 149.19 € : 500 kg : 150 mm : 150 mm : 360 kgm : 230 / 50 V / Hz : 0.37 kW : 0.37 kW : 0.1 - 3 U/min : 45 s : 800 mm : M20X6 mm : 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 13200 € : 253.44 € : 10000 kg : 5000 to : 900 mm : 4500 mm : 300 mm : 2 x 70 mm Rotatators are used across industries to facilitate production and simplify the assembly of tanks, drums,as well as pressure vessels and cylinders of all types and sizes. They increase speed and efficiency in both automatic and manual welding processes by increasing productivity while minimizing additional work steps and crane use. They allow the operator to control all functions, including clockwise and counterclockwise rotation, with exceptionally smooth and precise speed control. Roller material: Polyurethane Standard rotators currently cover load capacities from 5 to 150 tons. Capacity can be expanded up to 250 to upon request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

： neu ： 2025 ： 020176 ： prompt， Zwischenverkauf v ： Türkei ： 3700 €： 1 ： 4 kg： 155 kg： 2 to ： 100 mm： 900 mm： 300 mm： 70 mm 配备0.55千瓦电机驱动 前进和倒退操作脚踏板 本广告数据由ModulMWS创建——LogoTech oHG的软件解决方案�

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 16000 € : 307.2 € : 20000 kg : 10000 to : 900 mm : 4500 mm : 300 mm : 2 x 70 mm Rotatators are used across industries to facilitate production and simplify the assembly of tanks, drums,as well as pressure vessels and cylinders of all types and sizes. They increase speed and efficiency in both automatic and manual welding processes by increasing productivity while minimizing additional work steps and crane use. They allow the operator to control all functions, including clockwise and counterclockwise rotation, with exceptionally smooth and precise speed control. Roller material: Polyurethane Standard rotators currently cover load capacities from 5 to 150 tons. Capacity can be expanded up to 250 to upon request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 020157 : prompt, Zwischenverkauf v : Türkei : 6320 € : 121.98 € : 1 : 250 kg : 150 mm : 150 mm : 360 ° : 360 kgm : 230 / 50 V / Hz : 0.37 kW : 0.25 kW : 0.1 - 3 U/min : 30 s : 600 mm : M16x6 mm : 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 10400 € : 199.68 € : 20000 kg : 10000 to : 750 mm : 4500 mm : 300 mm : 2 x 70 mm Conventional rotating fixtures are preferred in areas such as welding, painting and paint preparation, due to their cost-effective design and ease of integration. They are manufactured as standard with capacities ranging from 1 to 150 tons. Roller material: Polyurethane Capacities up to 500 tons are also possible upon request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.