Modèle
(Fabricant: WMW)
Crimping tool, cable lug crimping tool, mechanical crimping tool -for: large cable lugs, hoses -up to: 60 mm² -Number: 7x hand press jaws available Price: per piece -Dimensions: 650/220/H45 mm -Weight: 8 kg
Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WMW, clamping cylinder stroke 15 mm -Type: 25 30-7312 -Shaft Ø 14 mm -Number: 12x clamping cylinders available -Price: per piece -Dimensions: Ø 50 x 96 mm -Weight: 1.2 kg/piece
Tapping chuck, thread chuck, tapping chuck, tapping attachment -Tapping attachment: Holder: MK4 -Reversing gear: Quick return integrated -Clamping diameter: 21 mm -Dimensions: 260/105/H310 mm -Weight: 6.8 kg
Clamping cylinders, hydraulic clamping cylinders, hydraulic clamps, pneumatic clamps, air cylinders, clamping cylinders for power chucks, hydraulic cylinders -Manufacturer: WMW, clamping cylinder stroke 20 mm -Type: 25 TGL 30-7311 -Shaft Ø 14 mm -Number: 16x clamping cylinders available -Price: per piece -Dimensions: Ø 35 x 127 mm -Weight: 0.6 kg/pc.
Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine, milling machine-horizontal -Manufacturer: WMW, counter bearing from milling machine -Dimensions: see drawing in the photos -Dimensions: 295/76/H125 mm -Weight: 6.5 kg
Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: WMW, fan head type MTK DN 50 GL 37081-86 HH -Flange: DIN 2576 ND10-NW50/60 -Bolt circle Ø 126 x 18 mm -Quantity: 6x hood available -Price: per piece -Dimensions: 230/165/H225 mm -Weight: 6.5 kg/pc.
Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Cover comes: from a WMW boring mill -for guide inside dimensions: 100 x 725 mm -Extractable: mm -Dimensions: 950/820/H150 mm -Weight: 30 kg
Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: WMW, fan head type MTK DN 40 GL 37081-86 HH -Bolt circle Ø 110 x 18 mm -Quantity: 1x hood available -Dimensions: 220/140/H220 mm -Weight: 5.4 kg
Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 65 GL 37081-86 HH -Flange: DIN 2576 ND10-NW65/76 -Bolt circle Ø 143 x 18 mm -Number: 2x hood available -Price per piece -Total dimensions: 280/185/H255 mm -Weight: 9 kg/pc.
Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: WMW, fan head type MTK DN 80 GL 37081-86 HH -Flange: DIN 2576 ND10-NW80/88 -Bolt circle Ø 160 x 18 mm -Quantity: 5x hood available -Price: per piece -Dimensions: 310/200/H290 mm -Weight: 12.2 kg/pc.
Boring spindle diameter: 130mm, tool holder: SK50, centering: 500mm, travel X/Y/Z: 250mm/160mm/380mm, travel W/U: 1000mm/320mm, feed rate: 2m/min, rapid traverse: 5m/min, max. diameter drilling/facing: 800mm/1400mm, torque boring spindle/facing support: 3100Nm/6150Nm, clamping plate dimensions X/Y/Z: 3500mm/1750mm/350mm, weight: approx. 30000kg, controls: Bosch. Including angle head, extension piece, steep taper tool holder for SK50 (without tools), 4x plate fields with the dimensions 1080mm/2000mm and boring apparatus. Documentation available. An inspection on site is possible.
Un tour à tourelle conventionnel non testé WMW avec de nombreux accessoires est disponible. Dimensions de la machine X/Y/Z : environ 2500 mm/1600 mm/1200 mm, poids : environ 2000 kg. Une inspection sur site est possible.
Key data: 2 mm, 10 mm
Redresseur de feuilles 2 000 x 10 mm Exécution .. 4high Blechdicje . 3-10 mm Redresser les rouleaux .. 13 pièces. Redresser les rouleaux durcm .. 145 mm Rouleaux de soutien, Duchm 290 mm Poids ... 32 000 kg Mot-conducteur... 30 KW
Perceuse radiale BR 56 x 1600 Année de construction : env. 1965 (estimation) Équipé d’un dispositif de refroidissement et d’une table de perçage en tant qu’accessoires optionnels
Presse Fabricant : WMW AG ANNÉE 2019 Modèle DIXI 40 SLk
fréquence : 50 Hz tension : 380 V : 220 V Puissance connectée : 2,6 kVA Courant nominal : 6,1 A Poids de la machine env. : 1 t
Course X/Y/Z : 850 mm/280 mm/355 mm, dimensions de la table X/Y : 1250 mm/315 mm, avance X/Y : 800 mm/min, avance Z : 250 mm/min, support de broche : ISO 50, vitesse de la broche : 1400 tr/min. Dimensions de la machine X/Y/Z : env. 2000mm/2000mm/2400mm, poids : env. 3300kg. Une inspection sur place est possible.
Capacité de perçage dans l’acier/la fonte : 40 mm/60 mm, plage de profondeur de gorge : 300 mm-1250 mm, hauteur max. de la pièce : 745 mm, support de broche : MK5, course de la broche : 355 mm, vitesse : 1200 tr/min, avance : 756 mm/min, diamètre de la colonne : 300 mm, distance entre la plaque de broche : 280 mm-1380 mm, dimensions de la table X/Y : 1400 mm/750 mm. Dimensions de la machine X/Y/Z : env. 2200mm/1000mm/2800mm, poids : env. 3000kg. Une inspection sur place est possible.
Capacité de perçage dans l’acier : 50 mm, support de broche : MK5, vitesse : 1000 tr/min, profondeur de la gorge : 355 mm, course de perçage : 280 mm, distance broche-table : 710 mm, distance broche-colonne : 355 mm, dimensions de la table X/Y : 630 mm/500 mm, diamètre de la colonne : 160 mm. Dimensions de la machine X/Y/Z : 1200mm/800mm/2700mm, poids : env. 1650kg. Une inspection sur place est possible.
Force de pression : 63 t, pression de service : 160 bar, vitesse de pression vers le bas/vers le haut : 200 mm/400 mm/s, course du vérin : 500 mm, profondeur de la gorge : 360 mm, distance maximale entre la table de piston : 800 mm, poids : environ 4200 kg. Une inspection sur place est possible.
A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.
Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible.
pressure: 40 t throat: 250 mm stroke: 1280 mm total power requirement: 6,5 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
internal diameter: 20... 400 mm grinding depth: 315 mm internal grinding spindle rev.-stepless: 2640...16500 U/min work piece spindle speed: 40400 U/min table speeds: 0,18 m/min rapid traverse: 10 m/min table travel: 630 mm total power requirement: 16 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: m grinding diameter: innen / internal 20..400 mm / external 500 mm max. diameter of work piece: 500 mm max. grinding length: 315 mm cone grinding: 60 ° power drive of internal grinding motor: 7,5 kW rev’s of internal grinding spindle: 2640...16500 U/min power drive of face grinding attachment: 4 kW power drive of workpiece motor: 1,5 kW rev’s of work piece spindle: 40...400 U/min steplessly variable table traverse speeds: 0,1...8 m / min rapid movement of table: 10 m / min stroke table 630 mm max. distance between work piece spindle flange and grinding spindle: 1250 mm ...
pression : 250 gorge : 400 mmcourse : 30...140 mmtaille de la table : 1000 x 750 mmtrou dans la table : 360 x 400 mmsurface de la ram : 630 x 500 mmréglage de la ram : 110 mmpuissance totale requise : 18 kWpoids de la machine env. : 16 tdimensions de la machine env. : mLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Longueur du bras : 300... 1600 mmRayon d’alésage max./min : 1800 mm Capacité d’alésage dans l’acier (diamètre) : 56 mmFiletage : max. 65 mm Profondeur de l’alésage : 400 mmcône d’outil : MK 5 plaque de base : 1700 x 1000 mm plage de vitesse de tournage - perçage : 14...1800 U/minavance : 0,0315...1,6 m/minpuissance totale requise : 4,5 kWpoids de la machine env. : 7,13 tdimensions de la machine env. : m- distance Tête de broche à la base : max. 1600 mmLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
saw blade diameter: 250 - 1250 mm grinding wheel diameter: 250 mm total power requirement: 3,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 850 x 1000 x 1800 mm Circular saw blade sharpening machine for sharpening medium to coarse metal saw blades Saw blade diameter Cold circular saws : 250 - 1250 mm Hot circular saws : 900 - 1700 mm Tooth pitch up to : 42 mm Grinding wheel double height : 25, 37, 50, 75 and 100 Grinding wheel revolutions : 2000 and 2500 rpm Grinding wheel diameter : 250 mm Pre-cutting tooth can be chamfered on both sides : up to 45 degrees Cutting edge geometry for hot circular saws : = -4 degrees Weight of the machine : 1000 kg external dimensions : 850 x 1000 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nominal power: 63 t stroke rate in continuous stroke: 90 min force: 2200 Nm Torque: 12500 Nm Labour performance: 5,5 kW sheet thickness - max.: 6,3 / 3,2 mm cutting surface: 1600 mm² distance between columns: 320 mm throat: 315 mm min. ram stroke: 8 mm max. ram stroke: 120 mm ram adjustment: 70 mm ram surface: 400 x 500 mm tool hole in ram: 40 mm tool shank hole (depth x diameter): 92 mm T-slots: 2 Stk total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offre 24177 Spécifications: - Hauteur de la pointe 180 mm - Largeur centrale 1000 mm - Grande circulation – au-dessus du lit 355 mm - via des traîneaux plats env. 200 millimètre - Alésage de la broche 36 mm - Cône de ramassage de la plume mobile MK 5 - Course de la poupée mobile 260 mm - Vitesses de la broche 18 - 1800 tr/min -Flux - Course du toboggan transversal env. 200 millimètre - Course de la glissière supérieure env. 115 millimètre - Entraînement 400 V / 5,8 kW - avec : - Poupée mobile, doublure à 3 mâchoires, lunette - Support en acier, poinçon central mobile, - Plateau à copeaux - Encombrement approximatif L 2500 x H 1500 x P 1200 mm - Poids env. 2100 kg
