中心幅:5000 mm ベッド上の回転直径:4000 mm 圧着時の回転直径:5000 mm スピンドルボア:104 mm 速度:1.4 - 71(18x)rpm 総電力要件:30 kW 機械重量約:t スペース要件約:m 4ジョーチャック800 / 360 mm リネット270mm クイックチェンジホルダーマルチフィックスHAASE 2軸ソニーD.R.O. 高速トラバース 旋回装置 この広告のデータは、LogoTech oHGの機械管理であるModulMWSで作成されました。
diameter:315 mm Speed:max. 2400 min. -1 weight of the machine ca.:25 kg
turning diameter:480 mm turning length:1250 mm control:H 645 weight of the machine ca.:8 t dimensions of the machine ca.:5 x 2 x 2 m centre distance:1580 mm swing over bed:495 mm swing diameter:üb.Querschlitten ca.350 mm working area:1600 mm control:H645 connected load:50 kW
turning diameter over bed: 500 mm turning diameter over slide rest: 330 mm turning diameter in the gap: 600 mm turning length: 3000 mm bed width: 505 mm spindle bore: 72 mm spindle head: DIN 55022 Gr. 8 taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/min power requirement: 18,5 kW dimensions: 5,3 x 1,75 x 1,53 m weight of the machine ca.: 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix C toolholder system - some toolholders - steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
直径:315 mmボア:95 mmツール アダプター:Din 55027 Gr. 8回転毎分:最大1500 U/min 自有在庫1600 m²のディーラー。この広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
3 ジョーチャック WMW NILES DHK 200x3 Outer Ø:200 mm フランジ:155 mm ボアØ:60 mm ボルト円:175 mm ジョー付き高さ:125 mm チャック番号:507 寸法:200 x 200 x 125 mm
3爪チャック、3爪チャック WMW DH-B 200x3x6 ( DH-B200x3x6 ) TGL 30-2332 外径 Ø:200 mm ボルト円Ø:133。 5 mm ボアØ:54 mm ジョー付き高さ:140 mm 中古、テスト済み! 寸法:200 x 200 x 121 mm
WMW ナイルズ 1400 x 2000 mm中心間距離:2000 mm ベッドの上をスイング:1400 mm クロススライド上のスイング:1100 mm スイングインギャップ:1800 mm 主軸ボア径:90 mm 主軸電源オン時:14 kW 速度数:382 rpm チャック(3/4ピンチ) -- 直径: 1200 mm
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: 200x3-III -TGL: 30-2332 -Chuck size: Ø 200 mm -Weight: 16.7 kg
Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: B200x3x6 -TGL: 30-2332 -Chuck size: Ø 200 mm -Cone: Ø 104 mm -Hole circle: Ø 132 mm -Through hole: Ø 54 mm -Weight: 15 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg
Three-jaw chuck, three-jaw lathe chuck -DH200x3-III -TGL: 30-2332 -Mouth size: Ø 200 mm -Recess: Ø 155 mm -Bolt circle: Ø 174 mm -Through hole: Ø 57 mm -Weight: 12 kg
Three-jaw chuck, 3-jaw chuck -Type: DHB 200x3x5 TGL 30 2332 -Mouth size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 rpm -Short taper mount: Ø 105 mm -Weight: 24 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -threaded mounting -Through hole: Ø 53 mm -Weight: 19.7 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Short cones: 5 -Bolt circle: 105 mm -Weight: 16.2 kg
three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories -Weight 14.4 kg
Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed -Feed size: Ø 250 mm -Weight: 35.5 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Weight: 12 kg
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg
three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg
Precision three-jaw chuck, chuck, faceplate, 3-jaw chuck -DHK: 200x3 -TGL: 30-2333 -Mouth size: Ø 200 mm -Bakes: individually and fully adjustable -Interchangeable jaws -Through hole: 55 mm -Recess: Ø 160 mm -Quantity: 1x food available Price: per piece -Weight: 16 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Cone: Ø 106 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg
