190 WMT 판매를위한 중고 기계

테이블 길이: 600mm 테이블 너비: 240mm X-트레블: 370mm Y-트레블: 130mm 테이블 높이: 165mm 무게: 60kg 치수: 0,8 x 0,45 x 0,2mm 턴테이블이 있는 크로스 테이�

최대 연삭 휠의 직경: 200mm 연삭 휠 너비: 32mm 테이퍼 직경: 30mm 연결 부하 주파수: 230V 엔진 출력: 0,9KW 무게: 28kg 치수: 0,56 x 0,32 x 0,30m

table length: 2990 mm table width: 1490 mm table height: 850 - 900 mm weight of the machine ca.: 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

콜릿 : 3 - 20mm 툴 테이퍼 : Sk 40 무게 : 4,5 kg 크기 : 350 x 250 x 100 mm 콜릿 세트 구성 : 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20mm 용 18 개 콜릿 18 개 상자. 콜릿 홀더와 열쇠 가 있는 상�

롤러 컨베이어 길이 : 3000 mm 최대 재료 무게 : 300 Kg / m 휠 폭 : 350 mm 롤 직경 : 60 mm 작업 높이 조절 가능 : 840 - 950 mm 무게 : 95 kg 폭 길이 : 620 mm 총 길이 : 3000 mm 스톱 시스템이없는 롤러 컨베이어. 안정적인 실행. 길이는 2미터에서 6미터까지 사용할 수 있습니다.

number: 32 Positionen weight: 35 kg Basic set 2 / 32 pieces for table top thickness 15 and 25 mm 6 pieces screw clamps 12 pieces quick clamping bolts 2 pieces universal stop 100 mm 4 pieces universal stop 150 mm 2 pieces universal stop 225 mm 2 pieces stop and clamping angle 175 mm 1 piece hole brush 300 mm 1 piece burner holder 1 piece non-stick spray 500 ml, natural, biologically based 1 piece welding table cleaner 500 ml, natural, biologically based The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 30000 kg length: 8000 mm width: 2500 mm height: 790 mm : lenkbar : lenkbar size of tyres: 425 x 260 / 2-fach weight of the machine ca.: 3,7 t dimensions of the machine ca.: 9,9 x 2,5 x 0,8 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

충격 길이 : 6000 mm 최대 재료 무게 : 300 Kg / m 휠 폭 : 350 mm 롤 직경 : 60 mm 작업 높이 조절 가능 : 840 - 950 mm 무게 : 195 kg 폭 길이 : 620 mm 총 길이 : 6400 mm 스톱 시스템을 포함한 롤러 컨베이어. 안정적인 실행. 길이는 2미터에서 6미터까지 사용할 수 있습니다.

롤러 컨베이어 길이 : 2000 mm 최대 재료 무게 : 300 Kg / m 휠 폭 : 350 mm 롤 직경 : 60 mm 작업 높이 조절 가능 : 840 - 950 mm 무게 : 55 kg 폭 길이 : 620 mm 총 길이 : 2000 mm 스톱 시스템이없는 롤러 컨베이어. 안정적인 실행. 길이는 2미터에서 6미터까지 사용할 수 있습니다.

: 100 × 5mm 스퀘어 엣지 스틸: 16 × 16mm 환봉 스틸: 18mm L 빔: 100 × 8mm 치수: 400 × 290 × 280mm 무게: 35Kg

range L-W-H: 1360x500x1970 mm weight: 115 kg : 7 St. weight max. in kg: 700 kg Professional workbench / tool trolley Dimensions of the upper drawers 1240 x 400 x 100mm. Middle drawer dimensions 770 x 400 x 60mm. Cabinet dimensions 500 x 420 x 540mm Dimensions of the tool wall 1050 x 610mm. Dimensions of the wall cupboards 2 pcs. 680 x 280 x 350mm. 4 rolls of 125 x 50 mm each. 4 x hanging storage containers of 10.5 x 14 x 7.5 cm. 3 x hanging storage containers of 14 x 22 x 12 cm. 2 x steel containers of 33 x 10 x 10 cm. 2 x U-hooks 55 x 25 x 6 mm. for tool wall. 4 x double hooks 85 x 6 mm for tool wall. 2 x universal hanging frame 37 cm. Wide. 2 x hanging racks for socket wrenches. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring length: bis 5700 mm Tube length: 6000 mm numbers of toolholders: 7 : Rohr Edelstahl dimensions: 6,0 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring length: bis 2000 mm Tube length: 2280 mm numbers of toolholders: 3 : Rohr galvanisch Verzinkt dimensions: 2,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 20000 kg length: 8000 mm width: 3000 mm height: 820 mm : star : lenkbar size of tyres: weight of the machine ca.: 4,0 t dimensions of the machine ca.: 8,25 x 3,0 x 0,82 mm Heavy duty trailer with - robust, low maintenance - with reversible drawbar, length 1320mm - 50mm impregnated wooden support. - Standard paint changes. On request in their Ral color. Would you like other loads and dimensions? Please contact us. Images are vehicles with special-drawbar height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 8 St. range L-W-H: 880 x 580 x 1000 mm weight: 156 kg : 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 770x450 mm. Maximum load per drawer 100kg! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M3 - M12 metrisch : 400 U/min. 0: 6 - 8 bar working area: max. 1100 mm weight: 15 kg dimensions: 700 x 280 x 200 mm Pneumatic tapping machine Type with an adjustable angle, horizontal tapping possible Pneumatic tapping machines for M3 - M12 threads, angle adjustable. 8 pcs. quick-change chuck with slipping clutch. Documentation in English! Optional: clamping table with grooves type: FL-WB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,32 t dimensions: 1,2 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t stroke: 180 mm daylight between the columns: 540 x 100 mm dayligth: max. 990 mm : 72 mm diameter of piston: 48 mm weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t stroke: 180 mm daylight between the columns: 335 x 115 mm dayligth: max. 340 mm : 56 mm diameter of piston: 40 mm weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,75 x 0,53 x 1,6 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

연삭 휠 직경 : 200 mm 작업 스테이션 수 : 2 Stück 연결 부하 주파수 : 230 V 총 전력 요구 사항 : 0,9 kW 기계 무게 : 20 Kg 크기 : 0,65 x 0,32 x 0,35 m

weight max. in kg: 2500 kg fork length: 1150 mm stroke height: min 85, max 200 mm : 155 mm length in width: 540 mm number of wheels: 4 vorne, 2hinten tire equipment: PU/Pu fork arm (length x width x thickness): 1150 x 155 x 50 mm weight of the machine ca.: 0,068 t dimensions: 1,5 x 0,54 x 1,21 m SPECIAL PRICE ! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1200 kg fork length: 1150 mm stroke height: min 85, max 190 mm : 160 mm length in width: 550 mm number of wheels: 4 vorne, 2hinten tire equipment: 80 x 70mm PU tandem fork arm (length x width x thickness): 1150 x 160 x 45 mm turning radius: 1452 mm battery: 48V / 20Ah weight of the machine ca.: 0,140 t dimensions: 1,65 x 0,55 x 1,2 m SPECIAL PRICE! - Battery charging time only 3 hours - Electrically lift and move - Use up to 6 hours - Easy to maneuver due to its low weight - Powerful lithium battery Driving speed - 4.5 km/h without load - with load 4.0 km/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2500 kg fork length: 950 mm stroke height: min 85, max 200 mm : 155 mm length in width: 540 mm number of wheels: 2 vorne, 2 hinten tire equipment: PU/Pu fork arm (length x width x thickness): 950 x 155 x 50 mm weight of the machine ca.: 0,059 t dimensions: 1,3 x 0,54 x 1,21 m SPECIAL PRICE ! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 850 - 900 mm weight of the machine ca.: 0,65 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2900 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,77 t dimensions: 2,9 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 15000 kg length: 6000 mm width: 2450 mm height: 625 mm : lenkbar : lenkbar size of tyres: 425 x 260 mm weight of the machine ca.: 2,6 t dimensions of the machine ca.: 7,2 x 2,45 x 0,625 mm Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - very robust, therefore low maintenance - Reversible drawbar, Length 1200mm - impregnated wooden support. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

정격 용량 : 6,3 / 7,0 KW 출력 전압 : 1 x 230AC / 1 x 400AC 50 Hz 엔진 : 418 cc 탱크 용량 : 16 l 기계 무게 ca : 155 Kg 크기 : 950 x 565 x 770 m 강력한 디젤 발전기 - 전기 스타터 - 출력 : 1 x 400 볼트 / AC, 1 x 230 볼트 / AC, 1 x 12 볼트 DC - 엔진 418cc - 탱크 16 리터

충격 길이 : 3000 mm 최대 재료 무게 : 300 Kg / m 휠 폭 : 350 mm 롤 직경 : 60 mm 작업 높이 조절 가능 : 840 - 950 mm 무게 : 117 kg 폭 길이 : 620 mm 총 길이 : 3400 mm 스톱 시스템을 포함한 롤러 컨베이어. 안정적인 실행. 길이는 2미터에서 6미터까지 사용할 수 있습니다.

thread dia.: M3 - M16 metrisch : 312 U/min. working area: max. 1100 mm engine output: 0,6 kW weight: 30 kg dimensions: 700 x 600 x 200 mm Electric tapping machines for M3 - M16 threads, Angle adjustable. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Options: Clamping table with grooves Type: FL-WB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

플레이트 두께 : 1,6 mm : 4 t 블레이드 길이 : 156 mm 각도 조절 가능 -까지 : Fest Grad 테이블 표면적 : 450m x 305 mm 총 전력 요구 사항 : Handbetrieb kW 기계 무게 ca : 95 Kg 크기 (LxWxH) : 530 x 380 x 480 mm