创刊编号 ： 8663 类型：Opticontrol 监制：威尼格 生成： 参数： 最大刀具直径： 300 mm 最大刀具长度：330 mm
Inv. Num. ： 8662 型号：Rondamat 960 监制：威尼格 生成时间：2000 年 参数： 速度：1500-3000 1/min 砂轮直径：150/225 mm 砂轮钻孔：60 mm
Inv. Num. ： 8653 类型：水垫 23 监制：威尼格 生成时间：2000 年 参数： 最大垂直主轴转速：6000 1/min 主轴数量：8 主轴直径：50 mm 机器高度： 1740 mm 机器长度： 3900 mm 机器宽度： 1900 mm 机器重量：4600公
Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and removing sections with defects (marked with fluorescent chalk). The separate measuring station records the lengths and marked defects. Technical data: Cutting height: 260 mm Saw blade diameter: 500 mm Input length: 400 6,300 mm Input thickness: 12 80 mm Feed rate: max. 250 m/min Cycle time: approx. 1 sec Saw motor: 7.5 kW Marking station: 5,000 mm Outfeed conveyor: 7.5 m with 3 pneumatic ejectors Control system: OptiCom Pro Condition: Gebraucht Location: Tauberbischofsheim, Germany
Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm - Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5 -20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed ...
Key data: 4 , 230 mm, 150 mm
四面刨床魏尼希 类型：Q 22 Quattromat（四重装） 制造年份：1990年 刨削宽度：230毫米 滑行高度 150 毫米 梳妆台长度 1960毫米 4个井道： 1 底部4千瓦 右侧为2，且 剩下3台，由1台5.5千瓦电机驱动 4台功率超过5.5千瓦 进给速度为6 - 22米/分钟。 供电开心板，供电电机2.2千瓦 润滑油泵手册 带隔音罩 包括刨床头 两件长230毫米 两件长150毫米 含基结构重量1,620公斤 尺寸 3350毫米 x 1450毫米 x 高1600毫米
Weinig Unimat 23 SP automatic planing and splitting machine for the precise planing (or pre-planing) and splitting of solid timber in a single operation. The machine delivers a high standard of finish and is ideal for efficient mass production in the timber industry. Technical data: Spindles: 4 Working width: 230 mm Working height: 120 mm Spindle 1: Bottom (5.5 kW) Spindle 2: Top (5.5 kW) Spindle 3: Right (11 kW) Spindle 4: Left (11 kW) Feed: 5.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany
Weinig Unimat 23E automatic planing and profiling machine for four-sided planing and profiling of timber, featuring a mobile spindle for automatic adjustment and a grooving bed (optionally available without the grooving bed) for short and curved workpieces, as well as a long dressing table. Technical data: Optional: Conversion to a conventional smooth table, on request. Spindles: 5 Spindle 1: Bottom / 40 mm / 5.5 kW Spindle 2: Right / 40 mm / 7.5 kW Spindle 3: Left / 40 mm / Shared motor with spindle 2 Spindle 4: Top / 40 mm / 7.5 kW Spindle 5: Bottom / 40 mm / 5.5 kW Working width: 230 mm Working height: 160 mm Feed: 4 kW / 524 m/min Condition: Gebraucht Location: Tauberbischofsheim, Germany
Key data: 7 , 170 mm, 140 mm
四面刨床魏尼希 类型：U 17 A 制造年份：1979年 滑行宽度 170 毫米 滑行高度 140 毫米 梳妆台，长1960毫米 7波： 1. 最低4千瓦功率 2. 右功率3千瓦 3. 左侧4千瓦 4. 右4千瓦 5. 顶级5.5千瓦功率 6. 最低4千瓦 7. 通用4千瓦 最大进给速度：18.5 m/min。 配备手动蜡光泵 功能良好的状态
For profiling and edge-milling windows doors individual components and similar items with all-round profiles, including return feed Units: Technical data: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Condition: Gebraucht Location: Tauberbischofsheim, Germany
WEINIG UNIVAR 10 automatic rebating machine from a UC-Matic window production line, not in working order. Technical data: Year of manufacture: 1997 Condition: Gebraucht Location: Tauberbischofsheim, Germany
Weinig Unicontrol 10 (UC 10) mitre saw system for the manufacture of windows, components and doors. Suitable for frame-by-frame, batch or individual part production, with 2 tenoning and slotting spindles, including an Oertli tool set Units: 1. Cross-cut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, Technical data: Clamping length: 640 mm (8 x 80) mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
For profiling and edge-milling windows, doors, individual components and similar items with all-round profiles Units: Technical data: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, synchronisation device 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Condition: Gebraucht Location: Tauberbischofsheim, Germany
Return transport / mechanisation compatible with Weinig Univar for transporting entire window sashes, panels or similar large workpieces. Technical data: Technical specifications: On request Condition: Gebraucht Location: Tauberbischofsheim, Germany
A wide range of second-hand spare parts, as well as complete units, control systems and switchboards for Weinig Univar (and other brands) are always in stock. Please contact us. Sample images. Condition: Gebraucht Location: Tauberbischofsheim, Germany
