Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .. crosscut saw .. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic len ...
Number of spindles: 3 St. Number of tools: 8 St. Spindle diameter: 50 mm Dimensions (L/W/H): 4250x1850x2300 mm ! MACHINE FUNCTIONALLY CHECKED AND READY FOR DEMONSTRATION ! ! Technical description in RUSSIAN, more machine pictures as well as machinevideos - if available - at the end of this description as attached files ! # 6988 Weinig Univar 6 CNC .. Technical details summary (please ask for possibly more included equpment) .. 1st profiling spindle: .. > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs. > length of spindle: 120 mm > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 2nd profiling spindle: .. > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm > spindle stroke vertical: variabel, ...
Working width: 230 mm Working height: 160 mm control: Memory Plus The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 window system ---------------------------------------------- Manufacturers description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transvers ...
Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 600 Compact ---------------------------------------------------------------------- The machine has been cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----------------------------------------------- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine ...
Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) crosscut saw > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate > Position: horizontally below > Motor power ...
Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ------------------------------------------ 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ------------------------- Diameter 40 mm Speed 6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ------------------------- Shared motor with left vertical spindle Diameter 40 mm Speed 8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel ...
diameter - cutter special: 30 mm draw-in arbor diameter: 40 mm clamping height: 310 mm circle diameter: 80-300 mm weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm # 6971 Weinig Unicontrol 6 -------------------------------------------- Technical Specifications Summary (Please inquire about any additional accessories included) Item 1: Crosscut Saw ------------------------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.7 kW > Laser alignment light for detecting the saw cut CNC-controlled length stop -------------------------------------------- > Length 3,500 mm > Electronic length stop including positioned crosscut saw Item 2: Tenon and slotting spindle --------------------------------------------- > Number of tools: 3 (stroke 2 x 100) mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > S ...
Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min. total power requirement: 27 kw Dimensions (L/W/H): 3900 x 2200 x 2000 mm weight of the machine ca.: 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ------------------------------------ Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) -------------------------------------------------------- General ------------------------------------ > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 m ...
Working width: 230 mm Working height: 15-120 mm Number of spindles: 2 St. Weinig Hydro Planer Type Uniplan 23 -------------------------------------------------------------------- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure pneumatic. Stops and table tops are not adjustable. Machine with steel table tops. ...
working length: 3600 mm Working width: 1500 mm Working height: ca. 900 mm WEINIG Return Conveyor System RF15 ----------------------------------- Can be used after moulders, planers, and milling machines with a maximum feed speed of approx. 22 m/min. Technical Description: Workpiece length: 250 - 3,600 mm Workpiece width: 30-230 mm Longitudinal-transverse conveyor with two integrated, driven roller conveyors: Transverse conveyor path 1,500 mm Constant conveyor speed: 30 m/min Roller conveyor length 2,200 mm Return roller conveyor (non-driven) to the operator (Technical specifications according to the manufacturer - without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of spindles: 8 St. Working width: 230 mm Working height: 120 mm Weinig Planing and moulding line ------------------------------- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tenoning spindle: 1 St Number of milling agregates: 4 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled -------------------------------------------------------------- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel Touch. With the following machining units: Crosscut saw -------------------------------------------------------------- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ------------------------------------------------------------- Axially adjustable with crosscut saw Tenon and slotting spindle -------------------------------------------- ...
Nous proposons à la vente une ligne de rabotage Weinig composée de : - Système d’empilage (x2) (peut également être tourné à 180 degrés) - Élimination des lames -Isolation - Weinig Hydromat 22 – 7 broches, vitesse d’avance jusqu’à 80 m/min (nouvelle commande) - station de tri -plafonnement -Groupement Spécifications: - Longueur totale de la ligne : 35 mètres - Largeur totale de la ligne : 15 mètres Pour en savoir plus, cliquez ici - / Contactez-nous au -
utilisé
Fabricant :Weinig Modèle : Powermat 500 Année de fabrication : 2009 Type de machine : Raboteuse avec retour automatique. Utilisation probable : Usinage du bois, en particulier le profilage et le rabotage des composants en bois. Pour en savoir plus, cliquez ici - / Contactez-nous au -
Fraiseuse automatique de profilés de rabotage WEINIG Profimat 26 Super Largeur de travail 20 - 230 mm (260) Hauteur de travail 8 - 120 mm(140) 5 broches de travail DM 40 mm Table de travail longue dans l’entrée ( env. 2000 mm ) Fond de broche de travail 4 kW / Gauche + Droite 7,5 kW / Dessus 5,5 kW / Fond de plâtrage 5,5 kW Pneum. Pression des rouleaux d’alimentation Avance du cardan réglable en continu 5 - 24 m/min. Rouleau d’alimentation devant le pansement Contrôle - Fonctionnement des boutons Auto. Pompe à lubrifiant Affichages numériques mécaniques Machine en version CE Année de fabrication 2001 Sans outils d’édition La machine est RÉVISÉE EN ATELIER en BON - ÉTAT en stock Lieboch
Longueur de l’entrée en bois : min. 130 mm Max. 1000mm Ø370mm Section transversale du bois : Min. 20x40mm Max. 80x180mm Longueur de sortie en bois : Min.3700mm Max.7400mm Version dent verticale/horizontale 10/11 pas de 3,8 mm Colle blanche PVAC, application de colle 2 faces Puissance raccordée 65 kW
Longueur de l’entrée en bois : min. 130 mm Max. 1000mm Ø370mm Section transversale du bois : Min. 20x40mm Max. 80x180mm Longueur de sortie en bois : Min.3700mm Max.7400mm Version dent verticale/horizontale 10/11 pas de 3,8 mm Colle blanche PVAC, application de colle 2 faces Puissance raccordée 65 kW
Données techniques Broches : 2 Ordre des spinaux : Bas (5,5 kW) - Haut (5,5 kW) Largeur de travail : 220 mm Hauteur de travail : 120 mm Avance : 3 kW // 32 m/min Diamètre de la broche : 50 mm Jointer Contre-stockage Paquet de pièces courtes
Données techniques Broches : 2 Ordre des spinaux : Bas (5,5 kW) - Haut (5,5 kW) Largeur de travail : 220 mm Hauteur de travail : 120 mm Avance : 3 kW // 32 m/min Diamètre de la broche : 50 mm Jointer Contre-stockage Paquet de pièces courtes
WEINIG HYDROMAT 22 BL Année de construction 1995 avec des fentes (scie à lamelles) Avaloir (retrait automatique et unité de déménagement !) Avec capot de sécurité et cabine insonorisée ! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8-80 m/min, moteur 18,5 kW Mise en page du casier: Gauche en bas-droit En haut - en bas, table rigide Bas, table fixe, broche préparée Haut - en bas, table fixe, broche préparée La division est constituée de 1 droite et 1 broche gauche pour 30 kW (4500 tr/min) y. rouleau de table, rouleau de glissage, pulvérisation et arrosage 4 élongation à rouleaux Impressions spéciales et installations pour la production de lamelles de surface Entrée (distributeur) pour lamelles et bandes d’extrait
Capacité : 230 x 130 mm. Nombre d’arbres : 9 En bas 7,5 kW, 7,5 kW à droite, 7,5 kW à gauche, 7,5 kW à droite, 7,5 kW à gauche, 7,5 kW en haut, 7,5 kW en bas, 7,5 kW en bas, Entraînement en bas Poussoir pneumatiques Table à surface avant Rouleaux d’alimentation pour pièces courtes Pompe manuelle pour lubrification du lit Diamètre de l’arbre : 50 mm. Rouleaux motorisés sur la table Alimentation : 6 - 36 m/min. Réglage motorisé de la hauteur
Capacité : 230 x 130 mm. Broches : 7 Fond 7,5 kW, 7,5 kW droit, gauche 11 kW, 7,5 kW droit, 11 kW supérieur, 11 kW inférieur 11 kW, broches universelles 11 kW 2, 3, 4 et 5 sont une dégauchisseuse droite 8000 tr/min. Sur la 2e broche inférieureEntraînement à arbre CardanPressions pneumatiquesRouleau d’alimentation intermédiaire pour pièces courtes0,8 m redressement de table d’entrée, lubrification manuelle du plateauDiamètre de la broche : 50 mm.5 rouleaux entraînés sur tableAlimentation : 6 - 36 m/min, moteur 7,5 kW réglage de la hauteur du moteur
Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW? Fence / Near 11 kW ? Top 7,5 kW ? Bottom 5,5 kW Spindle speed 6000 rpm Variable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mm Driven table roller Mechanical/digital read-out Centralised lubrication CE sound/safety hood Interior light Hopperfeed EM 11, upt to 60 cycles/min Workpiece length: 350 to 3000 mm Workpiece width: 20 to 230 mm Workpiece thickness: 12 to 70 mm Air requirement: 8 bar, connection DN8 Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/s Tooling not included
Capacité : 230 x 120 mm. Broches : 4 dessous 4 kw de guide et près de 5,5 kW en haut 5,5 kW Diamètre de la broche 40 mm Transmission par arbre Cardan, moteur 2,2 kWP Pressions neumatiques Table d’entrée de 2 m de longueur Pompe à cire pour la lubrification du lit, capot de sécurité manuel
Short infeed table (700 mm) with 2 driven feedrollers above and 1 driven feedroller in the infeed table In the machine 4 driven feedrollers Hardened table (with exception of the infeed table) Separate controll cabinet and electrical cabinet Automatic bed lubrication Pneumatic pressures Outfeed table with height adjustment 0/0,5/1 mm Sound enclosure with electromagnetic security Capacity: width 20 - 230 mm x height 8 - 160 mm (with cutting circles resp. 140 and 163 mm) Feedspeed: 6 - 36 m/min, motor 7,5 kW Number of spindles: 8 Spindle diameter: 50 mm Spindle speed: 6000 rpm Bottom 7,5 kW, outboard bearing Fence 7,5 kW Near 11 kW Fence 11 kW Top 15 kW, outboard bearing, straight jointer Bottom 22 kW, table prepared to take wooden inserts in case of ripping (tool diameter up to 250 mm) Top 11 kW, table prepared to take wooden inserts Bottom 11 kW, outboard bearing, straight jointer
Capacité : 260 x 130 mm. Broches : 5 Diamètre de l’arbre 40 mm Fond 4 kW, droite/gauche 7,5 kW, supérieur 5,5 kW, bas 4 kW Entraînement par arbre à ardes Pressions pneumatiques Vitesse d’avance variable, moteur 3 kWM réglage de hauteur augmenté de la poutre de pression supérieure Table d’entrée 2200 mm de longueur
N° Inv. : 8663 Type : Opticontrol Producteur : Weinig Generated: Paramètres: Diamètre max. de l’outil : 300 mm Longueur max. de l’outil : 330 mm
N° Inv. : 8662 Type : Rondamat 960 Producteur : Weinig Généré : 2000 Paramètres: Max. Vitesse : 1500-3000 1/min Diamètre de la meule : 150/225 mm Perçage de la meule : 60 mm
