Number of boring spindles: 7 St. Working width: 220 mm Working height: 120 mm total power requirement: 42 kw Feed motor: 7,5 kW Planing and moulder Weinig type Unimat 22 E for four-sided planing and profiling of timber incl. shuttering protection cabin, suction pipes and planing heads. Two driven rollers in the table. The machine is function-tested, dismantled and ready for loading. Spindle 1: Bottom / 5.5 kW / 40 mm Spindle 2: Right / 4 kW / 40 mm Spindle 3: Left / 6.5 kW / 40 mm Spindle 4: Right / 5.5 kW / 40 mm Spindle 5: Top / 4 kW / 40 mm Spindle 6: Bottom / 4 kW / 40 mm Spindle 7: Top / 5.5 kW / 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of boring spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2.000 mm Feed motor: kW Planing and moulder Weinig Profimat 23 for four-sided planing and profiling of timber incl. a set of planing heads. Including dismantling and loading. Fixed loading date: 15.06.2026. Spindle 1: Bottom Spindle 2: Right Spindle 3: Left Spindle 4: Top Spindle 5: Bottom The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
칼 수: Z2 V2 폭: 17 mm, 원형 직경: 160 mm, 재료: Stahl : WP 보어 직경: 40 mm조인팅 리베이트 커터 바이니히 타입 530 160 01 / 2 08, 바이니히 플래닝 기계의 플래닝 스핀들에 사용됩니다. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 제작되었습니다.
엔진: 0.18 kW 밴드 길이: 4.500 mm밴드 폭: 120 mm 인피드 컨베이어 벨트, 아웃피드 컨베이어 벨트 또는 연결 컨베이어 벨트 Weinig LTB 120/4500 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.
Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm # 6726 Weinig Unicontrol 12 CNC -------------------------------------------------------- Sale on behalf of a customer. Machine connected and ready for demonstration. crosscut saw -------------------------------------------------------- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate -------------------------------------------------------- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm -------------------------------------------------------- 1. tenoning Spindle ---------------------- ...
Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998
Manufacturer: Weinig Unicontrol, Type: Unicontrol 10, Year: 1999, Control: Weinig/Siemens, Controlled lenght stopper: yes, Trimming saw: yes, Studioeinrichtung Winkel: no, Automatisierungspaket: yes, Doppelteilpaket: yes, Elektrischer Längenanschlag bis mm: 3600, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400/320, Length of tenoning spindle mm: 640, Tool travel range tenoning spindle: für 8 Werkzeuge, Schlitzspindel Motorleistung kW: 7,5, Moulding spindles: 3, Länge Profilspindel mm: 320 X 50, 1 length of profile spindle in mm: 320, 1Engine power kW: 5,5, 2 length of profile spindle in mm: 320 X 50, 2 spindle lift in mm: 320, 2 Engine power kW: 5,5, 3 Länge Profilspindel mm: Profilfräsaggregat vertikal, 3 Engine power kW: 2,2, Diameter of the spindle mm: 50, Fly circle moulding tool mm: 320, Fly circle tenoning tool: 400, Constant str ...
Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999
Manufacturer: Weinig , Type: Unimat 3000 Brilliant, Year: 2002, Control: Weinig LogoCom, Planing widht mm: 20-230, Planing hight mm: 10-160, Number of spindles: 9, Elektronische Achsverstellung: yes, Wellendrehzahl: 4000-12000 regelbar, Fast exchange device: HSK 63, Setting up program shafts: yes, Saw unit kW: no, Table rollers: yes, Tool exchange places: no, Elektronische Anzeige : yes, Rotations of spindles max. rpm: 12000, Spindle arrangement: unten/rechts/links/rechts/oben/unten/oben/unten, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 7,5, Feeding speed min-max m/min: 10-36, Feeding speed continous adjustable: yes, Table length: kurz, Pneumatical top pressure: yes, Adjustment - electonically: yes, Jointer Stück: yes, 1.Bottom spindle kW: 7,5 KW/12000 U/min, 2nd spindle on right kW: 7,5/12000 U/min, 3.Left spindle kW: 11/ 4000-12000min, 4th spin ...
Manufacturer: Weinig, Type: Unicotrol 10-5, Year: 1992, Control: Siemens/weinig, Min.-max. workpiece height in mm: max.100 mm, Controlled lenght stopper: yes, Trimming saw: yes, 4-fach Konterholz: yes, Studioeinrichtung Winkel: yes, Automatisierungspaket: yes, Doppelteilpaket: yes, Unitecspindel: yes, Beschlagfräseinheit: yes, Nutspindel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400, Tool travel range tenoning spindle: 6 X 85/7 Werkzeuge, Länge Profilspindel mm: 3, 1 spindle lift in mm: 2 X 95/3 Werkzeuge, 1Engine power kW: 2 x 95, 2 length of profile spindle in mm: 11, 2 spindle lift in mm: 3 X 75/4 Werkzeuge, 2 Engine power kW: 3 X 75, 3 Länge Profilspindel mm: 11, Diameter of the spindle mm: 3 kw, Diameter of the spindle mm: 50, Feed stepless: 6-12, Total power kW: yes, Required space L x W x H mm: 10, Year :1992
Number of boring spindles: 4 St. Working width: 230 mm Working height: 160 mm Feed motor: 11 kW Feed speed: 60 m/min. Control: Memory Plus The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
크기: Auf Anfrage 무게: Auf Anfrage 사용 가능: Auf Anfrage Weinig Univar(및 기타 기타)의 다양한 중고 부품 또는 완제품 장치, 제어 시스템 및 제어 캐비닛이 항상 제공됩니다. 저희에게 연락해 주세요. 샘플 사진입니다. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 제작되었습니다.
Number of boring spindles: 7 St. Working width: 260 mm Working height: 160 mm Length of the planing table: 2.500 mm Feed motor: 4 kW Feed speed: 30 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
길이: 약 4,000 mm작업 높이: 약 900 mm무게: 약 2,500 kg Weinig Univar에 적합한 반환 운송 및 기계화 전체 창문 창틀, 패널 또는 유사한 대형 작업 작업물 운반에 적합합니다 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.
Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .. crosscut saw .. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic len ...
Manufacturer: Weinig Unicontrol 6, Type: Typ 6, Year: 1985, Control: SPS, Work piece width min-max mm: 25 - 260 mm, Min.-max. workpiece length in mm: 220 + 2xZapfen. max. 6000 mm, Min.-max. workpiece height in mm: 30 - 100 mm, Controlled lenght stopper: no, Studioeinrichtung Winkel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50 mm, Moulding spindles: 3, Länge Profilspindel mm: 300 mm, 1 spindle lift in mm: 100 mm, 1Engine power kW: 11 kW, 2 spindle lift in mm: 100 mm, 2 Engine power kW: 11 kW, 3 spindle lift in mm: 100 mm, 3 Engine power kW: 11 kW, Diameter of the spindle mm: 50 mm, Feeding speed max m/min: 5,8 - 80 m/min., Feed stepless: yes, Outer profiling package: yes, Splintering controlled: no, Horizontal spindle clocked: yes, Online connection: no, Work piece re-charging: no, Exhaust diameter mm: 180 mm, Required space L x W x H mm: 6000x3000x2300 mm, Maschine ...
Number of spindles: 3 St. Number of tools: 8 St. Spindle diameter: 50 mm Dimensions (L/W/H): 4250x1850x2300 mm ! MACHINE FUNCTIONALLY CHECKED AND READY FOR DEMONSTRATION ! ! Technical description in RUSSIAN, more machine pictures as well as machinevideos - if available - at the end of this description as attached files ! # 6988 Weinig Univar 6 CNC .. Technical details summary (please ask for possibly more included equpment) .. 1st profiling spindle: .. > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs. > length of spindle: 120 mm > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 2nd profiling spindle: .. > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm > spindle stroke vertical: variabel, ...
Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 window system ---------------------------------------------- Manufacturers description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transvers ...
Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 600 Compact ---------------------------------------------------------------------- The machine has been cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----------------------------------------------- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine ...
Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) crosscut saw > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate > Position: horizontally below > Motor power ...
Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ------------------------------------------ 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ------------------------- Diameter 40 mm Speed 6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ------------------------- Shared motor with left vertical spindle Diameter 40 mm Speed 8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel ...
diameter - cutter special: 30 mm draw-in arbor diameter: 40 mm clamping height: 310 mm circle diameter: 80-300 mm weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm # 6971 Weinig Unicontrol 6 -------------------------------------------- Technical Specifications Summary (Please inquire about any additional accessories included) Item 1: Crosscut Saw ------------------------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.7 kW > Laser alignment light for detecting the saw cut CNC-controlled length stop -------------------------------------------- > Length 3,500 mm > Electronic length stop including positioned crosscut saw Item 2: Tenon and slotting spindle --------------------------------------------- > Number of tools: 3 (stroke 2 x 100) mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > S ...
