69 WEINGARTEN 販売のための中古機

単列偏心プレス WEINGARTEN タイプ E 40Masch.No. 643/62 建造年 1963 圧力容量 40 トン。プロジェクション 250 mmテーブル開口部 150 x 80 および 200 mmテーブル面積 560 x 460 mmプランジャー面積 250 x 200 mmプランジャーストローク調整可能 8-88 mmプランジャー調整 63 mm設置高さ 320 mmピン穴 40 mmストロークレート 100/130 ストローク/分。モーター出力 2.2 / 3 kWネット接続 400ボルト、50 Hz床からのテーブル高さ 840 mm- TDC付きWEINGARTEN摩擦ねじカップリングによるクラッチ ブレーキの組み合わ�

シングルコラム - 偏心プレス WEINGARTEN タイプ ERV 40Masch。No. 537 / 65 建設年 1965圧縮力 40 トン。突起 230 mmテーブルサイズ 570 x 470 mmプランジャー面積 250 x 200 mmクランプピン穴 40 mm最大設置高さ 約520 mmストローク調整 8 - 88 mmプランジャー調整範囲 63 mmストロークレート 70ストローク/分駆動力 3 kWネット接続 380ボルト、50 Hz - テーブル高さ調整 - 破砕プレートによる過負荷保護 - WEINGARTEN 摩擦ねじ付きカップリングによるクラッチブレーキ� ��組み合わ�

シングルコラム - 偏心プレス WEINGARTEN タイプ ER 63Masch。No. 52A / 63 建設年 1963 圧力容量 63 トン。突起 280 mmテーブル面 630 x 530 mm調整可能なプランジャーストローク 8-100 mmプランジャー調整 63 mmストロークレート 65ストローク/分。エンジン出力 4 kWネット接続 380ボルト、50 Hz - WEINGARTEN 摩擦ねじ付きクラッチによるクラッチブレーキの組� ��合わせ - フットスイッチによる電気ストロークリリース - ホイールカウンター - 破砕プレートによる過負荷保護 - フロントクランクシャフト サポートベアリングスペース要件 長さ x 幅 x 高さ 1500

付録の図を参照してくださ�

ヴァインガルテン AR 63トン容量:63トン 最大調整可能ストローク:8 > 100 mm 描画速度:56/84 str / min テーブルの寸法:620 x 500 mm 直径テーブル穴:250 mm パンチホルダー径:40mm コース調整:63mm 重量:4ト�

CONTROLS   conventional PRESS DESIGN   drive system: eccentric / crank   frame design: C-frame, single sided PRESS FORCES   total force (nominal): 100 to SLIDE   slide force: 100 to   stroke rate (max.): 72 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 112 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 407 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes for safe tools only

Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown

プレスフォース:100t、ストロークレート:60/分、ラム� ��トローク:8mm-137mm、ラム調整:80mm、スロート深さ:375m m、テーブル寸法X/Y/Z:800MM/630mm、機械寸法X/Y/Z:約1500mm/ 2400mm/3500mm、重量:約8800kg。現地での検査も可能です�

押圧力:3150kN、テーブル寸法X/Y:2500mm/1600mm、ストロー� ��(固定):280mm、ストローク速度:20-80ストローク/分、� �量:約68000kg。ドレハートランスファーとフィードラ� ��ンを含む。制御システムに欠陥があります。ドキ� �メントが利用可能です。現地検品が可能です�

圧力:25 throat:200 mmストローク:mm圧力:25 tno。ストローク数: 140 ハブ/分フレーム内の窓: 240 mmストロークの調整: 8...80 mmラム - 調整範囲: 50 mmラムの表面: 355 x 220 mmテーブルサイズ: 560 x 400 mmテーブル内の穴: 160 mm総電力要件: 3 kW機械の重量 ca.: 2,23 t機械の寸法 ca.: m- 距離テーブルスライド: 250 mmこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

pressure: 40 t throat: 240 mm stroke: 8-88 mm no. of strokes: 57/86 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 240x200 mm hole in the table: Ø100 mm table height: 840 mm tool hole in ram: Ø40 mm weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 280 mm stroke: 8 - 112 mm no. of strokes: 30 - 120 Hub/min distance table/ram, max. stroke up, adjustment up: 500 mm table surface area: 840 x 580 mm hole in the table: 150 mm table height over floor: 910 mm passage to the back: 640 mm ram surface: 560 x 300 mm ram adjustment: 80 mm power capacity: 7,5 kW total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 1,4 x 2,3 x 3,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 280 mm stroke: 8 - 100 mm no. of strokes: 65 Hub/min ram adjustment: 63 mm table surface area: 620 x 500 mm distance table/ram, max. stroke up, adjustment up: 415 mm hole in the table: 230 mm table height over floor: 800 mm ram surface: 310 x 255 mm power capacity: 5,5 kW total power requirement: kW weight of the machine ca.: 3,95 t dimensions of the machine ca.: 1,20 x 1,80 x 2,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

プレス容量:30トン スロート深さ:160 ラムストローク調整可能:20-45 mm スライド調整:10/60 mm シャットダウン高さ(ストロークダウン、調整アップ ):220 mm テーブル表面積:470 x 300 mm スライドエリア:250 x 190 mm ストローク数:80-240 s.p.m.必要電力:4kW 寸法 L x W x H: 1.400 x 1.800 x 2.000 mm 機械の重量 約:2,67ト�

pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...

pressure: 125 t throat: 330 mm stroke: 20-120 mm no. of strokes: 50 Hub/min ram - range of adjustment: 100 mm table surface area: 800x640 mm ram surface: 500x400 mm hole in the table: Ø 330 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1500x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 860x620 mm ram surface: 540x360 mm hole in the table: Ø 270 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t distance between columns: 1600 mm stroke: 60 mm max. ram stroke: 60 1 / min ram adjustment: 100 mm dayligth: 700 mm Table area: 1600x1400 mm ram surface: 1400x1150 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mm table surface area: 950 x 700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,0 t dimensions of the machine ca.: 1400x2200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 300 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm table surface area: 700x550 mm ram surface: 400x300 mm table height: 870 mm hole in the table: Ø 280 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,0 t dimensions of the machine ca.: 1500x2000x2700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 230 mm stroke: 8-88 mm throat: 230 mm no. of strokes: 130 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 250x200 mm hole in the table: Ø 190 mm table height: 790 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 1000x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 280 mm stroke: 8-100 mm ram surface: 310x260 mm table surface area: 620x500 mm hole in the table: Ø 250 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1200x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes: 55/82 Hub/min ram - range of adjustment: 80 mm table surface area: 950x700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 800 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 1600x2200x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 320 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm : 355 mm table surface area: 720x550 mm ram surface: 400x310 mm sheet thickness - max.: 11 mm weight of the machine ca.: 9,5 t Overall size: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t throat: 170 mm stroke: 6-60 mm no. of strokes: 160 Hub/min ram - range of adjustment: 40 mm table surface area: 420x320 mm ram surface: 180x140 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 32 mm weight of the machine ca.: 1 t dimensions of the machine ca.: 1200x1200x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 280 mm stroke: 8-112 mm no. of strokes: 55 / 82 Hub/min ram - range of adjustment: 80 mm table surface area: 800x570 mm ram surface: 560x355 mm hole in the table: Ø 280 mm table height: 800 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1600x2200x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 330 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 850x600 mm ram surface: 550x360 mm hole in the table: Ø 240 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1300x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

圧力:100トン スロート:415 mm ストローク:8-140 mm ストローク数:48 ハブ/分 ラム - 調整範囲:80 mm テーブル表面積:920x670 mm ラム 表面:700x450 mm テーブル高さ:800 mm ラムの工具穴:50 mm 機械の重量:8 t 機械の寸法約:BxTxH 1500x2000x2800 mm