冲压机类型：2缸同步压机，压迫力：125吨，额定压迫 力：110吨，弯曲长度：3000毫米，冲程：360毫米，安装 高度：540毫米，框架间距：2550毫米，液压压力：256巴 ，重量：约12000公斤，控制系统：Cybelec DNC 7000图形版。包括各种工具。控制系统和屏幕于2025年 后期进行了更新。现场检查是可能的
pressure: 100 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 250 mm stroke: 200 mm adjustment of press crosshead: 200 mm stroke speed - idle stroke downwards: 105 mm/sec stroke speed - idle stroke upwards: 180 mm/sec stroke speed - under load: 9,5 mm/sec table width: 200 mm table height over floor: 900 mm dayligth: 280 - 480 mm back stop - adjustable: 3 - 729 mm control: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kW weight of the machine ca.: 10 t dimensions of machine L x W x H: 3,70 x 2,45 x 2,80 m Accessories: programmable back gauge, table extensions, various upper and lower dies segments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
制造商： 温布伦纳 型号： TSV 6 / 3050 建设年份：2015年底示范机 切割长度： 3050 mm 最大切割能力： 6 mm （钢） 营业时间：54 控制： 西贝莱克 DNC 60 尺寸长/宽/高： 4100/2050/2100 mm 工作台高度： 1000 mm 重量： 8500 kg 最小切割角度： 1 最大切削角度：2.5 最小行程速率：20 分钟 最大行程速率：25 分钟 切割间隙调整：电动 切割角度调整：液压 记录仪数量： 14 后挡风量程： 1000 mm 安全性：前后光栅保护 注油： 225 l 电力： 15 KW 额定功率：3x 400 V / 50 Hz 预保险丝： 50 A 辅助： 侧挡块延伸至 2050 mm 侧止器可侧向旋转 总共 8 个支撑臂可在工作台的整个长度上自由移动 该机器是薄荷状态的演示机器，可以通过预约在运行 进行检查。 它可以通过安排立即获得。 ...
工作宽度： 3050 mm 片材厚度： 6 毫米 投影： 200 mm 后挡风： 1000 mm 驱动功率： 15 kW 空间要求：4100 x 2300 x 2100 mm 重量： 8500 kg 保存完好的CNC控制液压面板剪板，控制在旋转控制面 Fabr中。西贝莱克，CNC 1000， 根据运行时间计数器的运行时间： 2700 h
工作宽度： 4100 mm 片材厚度： 16 毫米 投影： 300 mm 后挡风： 1500 mm 驱动功率：400 V，45 kW 空间要求：4800 x 3500 x 2600 mm 重量： 约 28000 kg
pressure: 250 t chamfer lenght: 3550 mm distance between columns: 3000 mm Control: Cybelelc DNC 1200 total power requirement: kW weight of the machine ca.: 18.500 kg dimensions of the machine ca.: 4300x2750x3750 mm Accessories: - 2-hand foot switch - Lasersafe Fisseler - Hydraulic tool clamping at top and bottom - Die shift - Hydraulic crowning - Support arms - Cybelec DNC 1200 control - 1 set of upper and lower tools - Controlled axes y1, y2, x, r, z1, z2, inclined stop - Protective grille The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80.0 t chamfer lenght: 2050 mm distance between columns: 1550 mm column arm: 250 mm table width: 85.0 / 135 mm stroke: ca. 390 mm dayligth: ca. 585 mm ajustment speed: 180 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec work height max.: 1050 mm Number of working hours: 32.495 h oil volume: 200 l operating pressure: 320 bar total power requirement: 11.6 KW weight of the machine ca.: 7300 kg range L-W-H: 3700 x 2000 x 3000 mm Good/well-maintained condition () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=IKyUmzB0WTI ------------------------------------------------- CNC electro-hydraulic press brake with: Increased installation height .. approx. 550 mm Increased cylinder stroke .. approx. 390 mm ------------------------------------------------- Features: - Robust electro-hydraulic press brake MADE IN GERMANY () - CYBELEC CNC control ...
pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 524 mm range L-W-H: 4200x2200x3700 mm weight of the machine ca.: 17.000 kg Equipment: - Control conversion 2023 to CYBELEC VisiTouch Pac - controlled axes: Y1, Y2, X, R, crowning - Hydraulic punch clamping - Hydraulic die clamping - 4-stage pneumatic die displacement The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of ram: 274 mm control: Cybelec ModEva Pac weight of the machine ca.: 17.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 4050 mm plate thickness: 20 mm distance between columns: 4100 mm column daylight: 4200 mm no. of strokes: 10-20 Hub/min working pressure: 250 bar total power requirement: 85 kW weight of the machine ca.: 43,6 t dimensions of the machine ca.: 5,5x2,8x2,9 m No. 793 Please note: this machine has no electrical system. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team ...
pressure: 200 t chamfer lenght: 3600 mm distance between columns: 2650 mm dayligth: 500 mm throat: 300 mm stroke: 250 mm working feed: 10,5 mm/sec return speed: 100 mm/sec ram stroke speed: 150 mm/sec table height: 900 mm oil volume: 500 l total power requirement: 37 kW weight of the machine ca.: 17800 kg dimensions of the machine ca.: 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
