이 6축 VOLLMER QXD 250 연삭기는 2017년에 제조되었습니다. 강력한 3상 380볼트, 50Hz, 8.7KVA 전원 공급 장치와 310리터의 상당한 냉각수 용량을 갖추고 있습니다. 기계 무게 7,200kg과 A축의 360도 회전 각도, B축의 +/-20도 회전 각도를 포함한 포괄적인 축 운동을 갖춘 이 VOLLMER QXD 250 연삭기를 구매할 기회를 고려해 보십시오. 이 기계에 대한 자세한 정보는 저희에게 문의해 주세요.
total power requirement:0,55 kw Overall size:800 x 900 x 1600 mm Weight:220 kg accessories::mit Absaugung 0,2 kw
길이: ~ 700 mm, 너비: ~ 600 mm, 높이: ~ 2,000 mm, Vollmer Junior B 자동 밴드쏘 연마기, 밴드쏘 날을 연마하는 데 사용됩니다. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 제작되었습니다.
제조사: 볼머, 유형: CMS 13M, 연도: 1994, 보어 직경: 5 - 50, 최대 디스크 직경 mm: 200, 최소 최대 외경 mm: 20 - 525, 최소-최대 직경. 치아 피치 mm: 26, 연도 :1994
중고 연삭기 Vollmer CABG 50U – 1995년 제작 – 매우 좋은 상태 판매는 품질 제조업체 Vollmer의 완전 자동 갱 톱 샤프닝 머신입니다. 기계는 상태가 매우 양호하고 완벽하게 작동하며 즉시 사용할 수 있습니다. 정기적인 연마가 필요한 제재소 또는 목공 회사에 이상적입니다. 사양: 모델: Vollmer CABG 50U 제작 연도: 1995년 기계 유형: 자동 갱 톱 블레이드 숫돌 상태 : 매우 좋음, 정기적으로 서비스 됨 톱날 폭: 최대 약 200mm 톱날 길이: 최대 약. 1650mm 경사각 조정: 약 -10 - +25 톱니 간격: 조정 가능(톱날의 종류에 따라 다름) 연마재 : CBN 또는 다이아몬드 연삭 휠 연삭 사이클: 완전 자동(인피드 및 회수 포함) 제어: 프로그램 선택이 가능한 전자 냉각: 통합 절삭유 공급 연결 부하: ...
회전 대칭 고체 카바이드 공구, 밀링 커터 및 드릴 가공을 위한 Vollmer CNC 5축 공구 연삭기가 제공됩니다. 연삭 휠 인터페이스: HSK50, 최대 가공 부품 직경: 50mm, 최대 가공 부품 길이: 265mm, 최대 연삭 길이: 200mm, 최대 연삭 휠 직경: 150mm, 이동 X/Y/Z: 350mm/450mm/500mm. 기계 치수 X/Y/Z: 약 2200mm/2200mm/2800mm, 무게: 약 4900kg. 문서가 제공됩니다. 현장 점검이 가능합니다.
고체 카바이드 회전 공구의 완전 가공을 위한 Vollmer CNC 5축 공구 연삭기가 제공됩니다. 공구 홀더: HSK50, 공구 위치: 8개, 최대 공작물 길이: 340mm, 최대 연삭 휠 직경: 150mm, 이동 X/Y/Z: 330mm/450mm/500mm, 작업물 매거진: 팔레트 매거진, 작업물 용량: 272. 기계 치수 X/Y/Z: 약 2650mm/2800mm/2200mm, 무게: 약 5550kg, 제어: Vollmer. 자동 HP160 워크피스 매거진도 포함해서요. 문서가 제공됩니다. 현장 점검이 가능합니다.
고체 탄화물 회전 공구의 제조 및 재연마를 위한 Vollmer CNC 5축 공구 연마기가 제공됩니다. 연삭 스핀들 인터페이스: HSK50, 최대 가공물 직경: 100mm, 최대 가공물 길이: 360mm, 최대 연삭 휠 직경: 150mm, 이동 X/Y/Z: 350mm/450mm/500mm, 가공품 매거진: 팔레트 매거진, 가공 용량: 272. 기계 치수 X/Y/Z: 약 2650mm/2800mm/2200mm, 무게: 약 5550kg, 제어 시스템: Vollmer. 자동 작업물 매거진 HP160도 포함해서요. 문서가 제공됩니다. 현장 점검이 가능합니다.
고체 카바이드 회전 공구의 완전 가공을 위한 Vollmer CNC 5축 공구 연삭기가 제공됩니다. 공구 홀더: HSK50, 공구 위치: 8개, 최대 공작물 길이: 340mm, 최대 연삭 휠 직경: 150mm, 이동 X/Y/Z: 330mm/450mm/500mm, 작업물 매거진: 팔레트 매거진, 작업물 용량: 272. 기계 치수 X/Y/Z: 약 2650mm/2800mm/2200mm, 무게: 약 5550kg, 제어: Vollmer. 자동 HP160 워크피스 매거진도 포함해서요. 문서가 제공됩니다. 현장 점검이 가능합니다.
Suitable for simultaneous, automatic grinding of both tooth flanks on carbide-tipped circular saw blades., Accessories:, Motorized rake angle adjustment,, Coolant system,, Automatic central lubrication,, Machine light,, 2 grinding wheel holders,, 1 sawblade mounting bolt., sheet thickness: up to 8 mm, Tooth pitch: 6 to 120 mm, rake angle: - 15° to + 25°, Tangential free angle: 0° to 6°, Radial free angle: - 4° to +6°, Connection value: ca. 1,1 kW (400 V / 50 Hz), Weight: about 1150 kg, Grinding wheel diameter: Max. 125 mm, Bore diameter: 32 mm, Dimensions L x W x H: 1340 x 1400 x 2000 mm, colour: green, Circular saw outer diameter: 80 to 460 mm
Suitable for automatic, double-sided tooth grinding of carbide-tipped circular saw blades., Accessories:, Wet grinding attachment,, Motorized rake angle adjustment,, 2 grinding wheel holders,, 1 mounting bolt., Circular saw blade outer diameter: 80 to 1270 mm, Circular saw drill diameter: 10 - 220 mm, sheet thickness: up to 14 mm, Tooth pitch: 6-120 mm, Grinding path: max. 16 mm, Cross angle : -15° to +40°, Tangential free angle: 0 to 5°, Grinding speed: 0.5 to 6 mm/s, grinding wheel diameter: 125 mm, Connected load approx.: 3,6 kW (400 V / 50 Hz), Weight approx: 1300 kg, colour: green RAL 6011
Suitable for automatic, double-sided tooth grinding of carbide-tipped circular saw blades., Accessories:, Wet grinding attachment,, Motorized rake angle adjustment,, 2 grinding wheel holders,, 1 mounting bolt., Circular saw blade outer diameter: 80 to 1270 mm, Circular saw drill diameter: 10 - 220 mm, sheet thickness: up to 14 mm, Tooth pitch: 6-120 mm, Grinding path: max. 16 mm, Cross angle : -15° to +40°, Tangential free angle: 0 to 5°, Grinding speed: 0.5 to 6 mm/s, grinding wheel diameter: 125 mm, Connected load approx.: 3,6 kW (400 V / 50 Hz), Weight approx: 1300 kg, colour: green RAL 6011
Suitable for the automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process., Accessories: Total enclosure, Integrated loading system and tool magazine Automatic machining of up to 12 HSK 63 tools, Program for erosion across the tool center at the cutting edge and for free erosion, Hardware and software for DNC service, Gripper fingers for workpiece automation SK40/HSK63-A,E/HSK63-B,F, Adaptation to the A-axis on HSK63-A,E including 25 mm diameter test mandrel (HSK63 A,E system), Grinding mist extraction N 181, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Measuring probes, Machine lamp, Automatic central lubrication, Cutter outside diameter: Max. 250 mm, Cutting length: Max. 260 mm, Shank tool diameter: 10-250 mm, Tool weight: Max. 20 kg, traverse: X-axis 275 mm, Y- ...
Suitable for the automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process., Accessories: Total enclosure, Integrated loading system and tool magazine Automatic machining of up to 12 HSK 63 tools, Program for erosion across the tool center at the cutting edge and for free erosion, Hardware and software for DNC service, Gripper fingers for workpiece automation SK40/HSK63-A,E/HSK63-B,F, Adaptation to the A-axis on HSK63-A,E including 25 mm diameter test mandrel (HSK63 A,E system), Grinding mist extraction N 181, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Measuring probes, Machine lamp, Automatic central lubrication, Tailstock, Cutter outside diameter: Max. 250 mm, Cutting length: Max. 260 mm, Shank tool diameter: 10-250 mm, Tool weight: Max. 20 kg, traverse: X-axis ...
Suitable for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard cutting materials. The workpieces can be picked up on the fly or between the centres (option)., Accessories:, Total enclosure, HR workpiece magazine (round magazine) for up to 16 workpieces up to 130 mm in diameter, 20 kg, or up to 8 workpieces up to 230 mm in diameter, 20 kg., Magazine disk for 16/8 HSK63-A,E workpieces with a diameter of 130/230 mm, up to 20 kg., Adapter to the A axis for HSK63-A,E., Automatic fire extinguishing system., N282 extraction system with 600 m³/h air flow., Automatic cover flap., Automatic central lubrication., Measuring probe., Cooling unit for dielectric fluid including cooling unit., HSK-A63 test mandrel., Workpiece diameter: up to 320 mm, workpiece length: up to 500 mm, workpiece weight: up to 25 kg, Holding mandrel: SK 50, Wire diameter: 0.1 ...
Description: 4-axis CNC controlled grinding machine, suitable for the automatic grinding of tooth faces and tooth backs on carbide-tipped circular saw blades., Accessories:, Coolant system,, Total enclosure,, Automatic central lubrication,, Hollow face grinding unit, mist extractor N183, Motor driven rake and clearance angle adjustment,, Machine lamp,, Oscillation grinding at tooth face and tooth clearance,, Multifunctions handwheel,, 2 grinding wheel flanges for face and top grinding,, 1 centering ring 40 mm,, 1 mounting mandrel., Circular saw hole diameter: 10 - 180 mm, Circular saw blade diameter: 80 to 840 mm, sawblade centrebore: 10 - 180 mm, Sheet thickness: up to 8 mm, Tooth pitch: up to 100 mm, mass: approx. 1660 kg, Rake angle: -10 ° to + 40 °, Clearance angle: from 5 ° to 45 °, Angled grinding on the back of the tooth: up to 45 °, Angled grinding on the tooth face: up to 1 ...
Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Full enclosure Measuring probe for complete measurement of the tools Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A Loader for up to 6 eroding disk sets (tool changer) Alphanumeric keyboard Standard programs for measuring, eroding Cooling and cleaning device for dielectric Automatic fire extinguishing device Extraction N183 1 exchange element 1 flushing set 1 measuring mandrel 1 mounting flange for rotating electrodes, X axis travel: 440 mm, B-axis: +/- 15°, Y axis travel: 876 mm, Z-axis travel: 420 mm, E-axis swivel range: 210°, A-axis rotation range: 360°, workpiece carrier base: SK 50, workpiece length max.: 200 mm, Workpiece diameter max.: 250 mm, workpiece weight: 15 kg, Connected load approx.: 6.7 kW 400V/50 Hz, Weight app ...
Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light, saw diameter: 80-840 mm, Bore diameter: from 10 mm, sheet thickness: < 8 mm, Tooth pitch: 6 - 120 mm, Cutting length:
자동 원형톱 연마기가 완전히 정비되었습니다. 모든 일반적인 치아 모양의 HM 원형톱 완전 자동 연마를 위해. 오일 냉각 및 소화 장비가 장착되어 있습니다. 기술 데이터: 로봇 장착 원형톱 Ø 130에서 600, 로봇 없이 130에서 840 mm, 로봇 장착 톱니 피치 8에서 50 mm, 로봇 없이 8에서 120 mm. 로더 로봇 ND 230, 추출 시스템과 함께 요청 시 제공됩니다.
Suitable for automatic, double-sided tooth flank grinding on carbide-tipped circular saw blades., Accessories:, Total enclosure., Coolant System,, Automatic central lubrication,, Expansion of diameter range from 80 – 1,430 mm, Circular sawblade outer diameter: 80 to 1430 mm, Circular sawblade bore diameter: 10 - 220 mm, sheet thickness: up to 14 mm, rake angle: -15° to +40°, Radial free angle: -6° to 6°, Tangential free angle: up to +8°, Grinding path: Max. 30 mm, Grinding speed: 0.5 - 20 mm/s, Tooth pitch: 6 - 120 mm, Grinding wheel diameter: 80 to 125 mm, Grinding wheel bore diameter: 32 mm, Connected load approx.: 3,6 kW (400 V / 50 Hz), Dimensions W x D x H approx.: 2395 x 1590 x 1970 mm, colour: green/grey, Weight approx: 1750 kg
Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories:, Total enclosure,, SK 40 or 50 workpiece carrier according to preference,, Cooling unit for dielectric,, Automatic fire extinguishing system,, Measuring probe,, SK 40 or 50 measuring mandrel depending on workpiece carrier,, Alphanumeric keyboard for data management,, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions,, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes,, Software package for profile tools, 4-path program for peripheral electrodes,, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries,, Automatic central lubricat ...
Suitable for automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters, etc. using the wire electro-erosion process. Accesories: Total enclosure,, Mist extractor, Probe,, Machine lamp,, Automatic central lubrication,, Coolant system dielectric fluid, Fire extinguishing system, Measuring mandrel, Alphanumeric keyboard, cutter outer diameter max: 250 mm, cutting length max.: 200 mm, shank tool diameter: 10 - 250 mm, cutting length: 200 mm, Outside diameter of disc-shaped tools max.: 250 mm, tool weight max.: 20 kg, X-axis travel: 220 mm, Y-axis travel: 300 mm, W axis travel: 200 mm, A-axis rotation range: 60 °, A-axis taper: ISO 40, E-axis swivel range: 120 °, number of revolutions: 80 - 2000 rpm., Dimensions L x W x H: 2235x2630x2130mm, mass: approx. 4500 kg, Connected load approx.: 400V / 50Hz / 4.5KW, colour: turquoise RAL 5021/gr ...
Suitable for automatic, double-sided grinding of tooth flanks on circular saw blades with carbide tips., Accessories:, Partial enclosure,, 1 sawblade holder,, Coolant system., Circular saw outer diameter: 260 to 2200 mm, Circular saw bore diameter: 25 to 220 mm, sawblade thickness: up to 20 mm, Tooth pitch: from 10 mm, rake angle: any, Radial free angle: up to 6°, Tangential free angle: up to 6°, Grinding path: up to 75 mm, Grinding speed: 0.5 to 6 mm(s), Working speed: up to about 10 teeth/min, Grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding wheel peripheral speed: 26 m/s, Cooling lubricant pump capacity: 250 l/min, Coolant Tank Content: approx. 190 l, Connected load approx.: 6,5 kW (400 V / 50 Hz), Dimensions W x D x H =: 3050 x 1890 x 2050 mm, Weight approx.: 2160 kg, colour: green
Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Equipment for robot operation with automatic loading door, ND 230 loader, Measuring device for measuring saw blades, Chip breaker grinding attachment, Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm., Grinding speed and grinding path stepless adjustable for each machining surface on the tooth., Automatic central lubrication, Software package for oscillation grinding at rake and clearance angles, Automatic shut-off flap, Automatic fire extinguishing system, Electrostatic oil mist separator N281, Measuring tool, Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180, Sawblade holder with g ...
Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process., Accessories:, Total enclosure,, Adaptation to A-axis on HSK63-A,E incl. test mandrel Ø 25 mm System HSK63 A,E, Integrated loading system and workpiece magazine for automated processing of up to 12 workpieces., Probe,, Automatic central lubrication,, Coolant system for dielectric fluid,, Automatic fire extinguishing system,, Mist extractor,, Machine lamp., Cutter outside diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outside diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, Tool weight: max. 20 kg, X axis travel: 500 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis rotation range: 360 °, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2280 mm, Weight a ...
