saw blade diameter: - mm workpiece-spindlehead motor: 0,18 kW grinding wheel diameter: ? mm total power requirement: 0,18 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 0,8 0,5 1,6 m https://www.youtube.com/watch?v=fwZx3rLfIYA The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
市面上有Vollmer CNC五轴刀具磨床，用于加工旋转对称的实心硬质合金 具、铣刀和钻头。砂轮接口：HSK50，最大工件直径： 50mm，最大工件长度：265mm，最大磨削长度：200mm，最 砂轮直径：150mm，行程X/Y/Z：350mm/450mm/500mm。机器尺寸 X/Y/Z：约2200毫米/2200毫米/2800毫米，重量约4900公斤。 档可查。现场检查是可能的
市面上有Vollmer数控五轴刀具磨床，用于完整加工固体 硬质合金旋转刀具。刀具夹持：HSK50，刀具位置：8个 最大工件长度：340毫米，最大砂轮直径：150毫米， 程X/Y/Z：330毫米/450毫米/500毫米，工件弹匣：托盘弹 ，工件容量：272。机器尺寸 X/Y/Z：约2650毫米/2800毫米/2200毫米，重量约5550公斤， 制：沃尔默。包括自动HP160工件弹匣。文档可查。现 检查是可能的
市面上有Vollmer数控五轴刀具磨床，用于制造和重磨固 体硬质合金旋转刀具。磨削主轴接口：HSK50，最大工 直径：100mm，最大工件长度：360mm，最大砂轮直径：15 0mm，行程X/Y/Z：350mm/450mm/500mm，工件弹匣：托盘弹匣， 工件容量：272。机器尺寸 X/Y/Z：约 2650mm/2800mm/2200mm，重量约 5550kg，控制系统：Vollmer。包括自动工件弹匣HP160。文 可查。现场检查是可能的
市面上有Vollmer数控五轴刀具磨床，用于完整加工固体 硬质合金旋转刀具。刀具夹持：HSK50，刀具位置：8个 最大工件长度：340毫米，最大砂轮直径：150毫米， 程X/Y/Z：330毫米/450毫米/500毫米，工件弹匣：托盘弹 ，工件容量：272。机器尺寸 X/Y/Z：约2650毫米/2800毫米/2200毫米，重量约5550公斤， 制：沃尔默。包括自动HP160工件弹匣。文档可查。现 检查是可能的
Suitable for simultaneous, automatic grinding of both tooth flanks on carbide-tipped circular saw blades., Accessories:, Motorized rake angle adjustment,, Coolant system,, Automatic central lubrication,, Machine light,, 2 grinding wheel holders,, 1 sawblade mounting bolt., sheet thickness: up to 8 mm, Tooth pitch: 6 to 120 mm, rake angle: - 15° to + 25°, Tangential free angle: 0° to 6°, Radial free angle: - 4° to +6°, Connection value: ca. 1,1 kW (400 V / 50 Hz), Weight: about 1150 kg, Grinding wheel diameter: Max. 125 mm, Bore diameter: 32 mm, Dimensions L x W x H: 1340 x 1400 x 2000 mm, colour: green, Circular saw outer diameter: 80 to 460 mm
Suitable for the automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process., Accessories: Total enclosure, Integrated loading system and tool magazine Automatic machining of up to 12 HSK 63 tools, Program for erosion across the tool center at the cutting edge and for free erosion, Hardware and software for DNC service, Gripper fingers for workpiece automation SK40/HSK63-A,E/HSK63-B,F, Adaptation to the A-axis on HSK63-A,E including 25 mm diameter test mandrel (HSK63 A,E system), Grinding mist extraction N 181, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Measuring probes, Machine lamp, Automatic central lubrication, Cutter outside diameter: Max. 250 mm, Cutting length: Max. 260 mm, Shank tool diameter: 10-250 mm, Tool weight: Max. 20 kg, traverse: X-axis 275 mm, Y- ...
Description: 4-axis CNC controlled grinding machine, suitable for the automatic grinding of tooth faces and tooth backs on carbide-tipped circular saw blades., Accessories:, Coolant system,, Total enclosure,, Automatic central lubrication,, Hollow face grinding unit, mist extractor N183, Motor driven rake and clearance angle adjustment,, Machine lamp,, Oscillation grinding at tooth face and tooth clearance,, Multifunctions handwheel,, 2 grinding wheel flanges for face and top grinding,, 1 centering ring 30 mm,, 1 mounting mandrel., Circular saw blade diameter: 80 to 840 mm, Circular saw hole diameter: 10 - 300 mm, sawblade centrebore: 10 - 180 mm, Sheet thickness: up to 8 mm, Tooth pitch: up to 100 mm, mass: approx. 1660 kg, Rake angle: -10 ° to + 40 °, Clearance angle: from 5 ° to 45 °, Angled grinding on the back of the tooth: up to 45 °, Angled grinding on the tooth face: up to 1 ...
Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Full enclosure Measuring probe for complete measurement of the tools Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A Loader for up to 6 eroding disk sets (tool changer) Alphanumeric keyboard Standard programs for measuring, eroding Cooling and cleaning device for dielectric Automatic fire extinguishing device Extraction N183 1 exchange element 1 flushing set 1 measuring mandrel 1 mounting flange for rotating electrodes, X axis travel: 440 mm, B-axis: +/- 15°, Y axis travel: 876 mm, Z-axis travel: 420 mm, E-axis swivel range: 210°, A-axis rotation range: 360°, workpiece carrier base: SK 50, workpiece length max.: 200 mm, Workpiece diameter max.: 250 mm, workpiece weight: 15 kg, Connected load approx.: 6.7 kW 400V/50 Hz, Weight app ...
Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light, saw diameter: 80-840 mm, Bore diameter: from 10 mm, sheet thickness: < 8 mm, Tooth pitch: 6 - 120 mm, Cutting length:
自动圆锯磨刀机彻底翻新。用于全自动磨利所有常见 形的HM圆锯片。 配备油冷、灭火设备。技术数据：带机器人的圆锯Ø 直径130至600毫米，无机器人时130至840毫米，齿距8至50 毫米，非机器人8至120毫米。可根据要求提供装载机器 人ND 230，配备抽取系统
Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories:, Total enclosure,, SK 40 or 50 workpiece carrier according to preference,, Cooling unit for dielectric,, Automatic fire extinguishing system,, Measuring probe,, SK 40 or 50 measuring mandrel depending on workpiece carrier,, Alphanumeric keyboard for data management,, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions,, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes,, Software package for profile tools, 4-path program for peripheral electrodes,, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries,, Automatic central lubricat ...
Suitable for automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters, etc. using the wire electro-erosion process. Accesories: Total enclosure,, Mist extractor, Probe,, Machine lamp,, Automatic central lubrication,, Coolant system dielectric fluid, Fire extinguishing system, Measuring mandrel, Alphanumeric keyboard, cutter outer diameter max: 250 mm, cutting length max.: 200 mm, shank tool diameter: 10 - 250 mm, cutting length: 200 mm, Outside diameter of disc-shaped tools max.: 250 mm, tool weight max.: 20 kg, X-axis travel: 220 mm, Y-axis travel: 300 mm, W axis travel: 200 mm, A-axis rotation range: 60 °, A-axis taper: ISO 40, E-axis swivel range: 120 °, number of revolutions: 80 - 2000 rpm., Dimensions L x W x H: 2235x2630x2130mm, mass: approx. 4500 kg, Connected load approx.: 400V / 50Hz / 4.5KW, colour: turquoise RAL 5021/gr ...
Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Equipment for robot operation with automatic loading door, ND 230 loader, Measuring device for measuring saw blades, Chip breaker grinding attachment, Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm., Grinding speed and grinding path stepless adjustable for each machining surface on the tooth., Automatic central lubrication, Software package for oscillation grinding at rake and clearance angles, Automatic shut-off flap, Automatic fire extinguishing system, Electrostatic oil mist separator N281, Measuring tool, Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180, Sawblade holder with g ...
Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:, Total enclosure,, Cooling unit for dielectric,, automatic fire extinguishing system,, Mist extractor, Probe,, Machine lamp,, automatic central lubrication,, Workpiece carrier ISO50,, Measuring mandrel,, Tailstock., Cutter outside diameter: Max. 250 mm, Cutting length: max. 260 mm, Shank tool diameter: 10 - 250 mm, Outside diameter disc-shaped tools: Max. 250 mm, Tool weight max.: 20 kg, X axis travel: 275 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis mounting cone: ISWO 50, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2220 mm, Weight approx.: 4500 kg, Connected load: 4.5 kW (400 V / 50 Hz), colour: gray RAL 7045/7047
Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:, Total enclosure,, Cooling unit for dielectric,, automatic fire extinguishing system,, Mist extractor N181, Probe,, Machine lamp,, automatic central lubrication,, Workpiece carrier ISO50,, Measuring mandrel,, Cutter outside diameter: Max. 250 mm, Cutting length: max. 260 mm, Shank tool diameter: 10 - 250 mm, Outside diameter disc-shaped tools: Max. 250 mm, Tool weight max.: 20 kg, X axis travel: 275 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis mounting cone: ISWO 50, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2220 mm, Weight approx.: 4500 kg, Connected load: 4.5 kW (400 V / 50 Hz), colour: gray RAL 7045/7047
Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure,, Extraction N183,, Cooling and cleaning device for dielectric,, Automatic fire extinguishing device,, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading, 1 set of gripper fingers for workpiece automation HSK 63/SK40, Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A,, 1 exchange element with flange,, 1 x flushing kit,, Test bar, X axis travel: 440 mm, B-axis: +/- 15°, Y axis travel: 876 mm, Z-axis travel: 420 mm, E-axis swivel range: 210°, A-axis rotation range: 360°, workpiece carrier base: SK 50, workpiece length max.: 200 mm, Workpiece diameter max.: 250 mm, workpiece weight: 15 kg, Connected load approx.: 6.7 kW 400V/50 Hz, Weight approx: 7000 kg, Dimensions W x D x H =: 1987 ...
Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure, External PC with contour management and Exprog software, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Automatic central lubrication, Extraction system,, Measuring probe, Machine lamp, Workpiece carrier SK 40, Measuring mandrel SK 40, cutter outer diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outer diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, X-axis travel: 500 mm, Tool weight: max. 20 kg, Y axis travel: 300 mm, Travel path W-axis: 200 mm, Machine space requirements: 2535 x 2200 x 2280 mm, A-axis rotation range: 360°, E-axis swivel range: 180°, Weight approx.: 4800 kg, Connected load: 5,4 kW, colour: grey RAL 7035/7043
CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production., Accessories:, Total enclosure, Software path management, Software P- System for peeling cutters,, Software shaft endmills (207/208), Software discoid tools face (221/222/223/224), Software profiled workpieces (233/234/239/240), Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263), Software discoid tools (264/265), Software shaft and jointing cutters (267/268/277/278), Software step tools (271), Software scoring saws (299), Software saws flat tooth (301), Software saws single sided with chamfer (302/303), Software saws alternate tooth (304), Software saws triple chip (309), Software saws flat top tooth (310), Software saws flat trapezoid tooth (311) ...
金属导丝元件，间距 100-200 mm，加长 15 mm使用这些导丝元件可减小可加工工件的直径。适用 Vollmer 机器类型： QWD 76 P / QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500
A 轴 HSK63-B，F 适配器 用于手动和自动加载。适用于 Vollmer 机器类型：QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 以及 QXD 系列的所有型号 （200/250/400
描述：用于 Vollmer ND 品牌锯片处理系统的外部数据输入站。用于锯片各种 工步骤的单独输入。带有集成路由器的数据输入站 管机器之间的接口，连接到客户自己的服务器或 PC
描述：用于 Vollmer ND 品牌锯片处理系统的外部数据输入站。用于锯片各种 工步骤的单独输入。带有集成路由器的数据输入站 管机器之间的接口，连接到客户自己的服务器或 PC
圆锯片磨刀机 Vollmer 类型 CNS 适用于 CV 圆锯片 用于直磨和斜磨 砂轮直径最大 150 毫米 锯片直径 90 – 600 毫米 磨刀速度 3 种速度 每分钟 30/60/80 齿 驱动整经盘电机功率 0.2 kW 驱动进给 0.4 kW 尺寸 800 毫米 x 900 毫米 x 高 1800 毫米 重量约 250 kg
Vollmer CHHF 21 H - 单面磨床 建造年份：1989年 S/N 907 制造商：德国沃尔默 工作状况良好 CHHF 21H的技术数据一览： 圆锯片 外径 80 至 700 mm 孔径 20 至 105 mm 齿距从 8 mm 起 吊钩角度可达 30 径向间隙角 -7 至 +3 切向间隙角可达 5 连接负载约 0.52 kW 重量约 85 公斤 尺寸：70 x 50 x 80 厘米 Cisei8tfrg 本机专为维修 缺乏碳化物齿。新插入的吸头用于 现有的牙齿。 通过此桌面版本，孚尔默提供了 一种特别经济、节省空间的解决方案。这 CHHF 21 H 根据湿法研磨工艺工作。 在研磨过程中，研磨单元 使用锯片手动移动到齿面上 锯片靠在固定挡块上手动定位。 下一颗牙齿，然后是所有其他牙齿 可以研磨直到所需的齿面尺寸 实现了
