Виробник:
(Категорія: 101)
bore capacity in steel (diameter): 30 mmthroat: 250 mmbore stroke: 130 mmspindle taper MT: 3 MKtable:: 380 x 380 mmcolumn diameter: 98 mmturning speeds: 75 - 3200 U/minfeeds: mm/Utotal power requirement: 1,1 kWweight of the machine ca.: 220 kg.range L-W-H: 0,5 x 0,6 x 2,05 mmGear drillThread cutting deviceLeft/right barrelTilting work table.Lighting.2 electric Speed levels.Depth stop.Gears run in oil.Packaging dimensions:2100x400x710mmWeight 260kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmthroat: 200 mmbore stroke: 120 mmspindle taper MT: 4 MKtable:: 290 x 270 mmcolumn diameter: 92 mmturning speeds: 150 - 2450 U/minfeeds: 0 mm/Utotal power requirement: 1,1 kWweight of the machine ca.: 95 kgrange L-W-H: 0,66 x 0,8 x 1,7 mColumn drilling machine with:ARBO / CE approved protective cover.Quick release chuck with pin.Tiltable work table.Deep stop.Ejector wedge.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel: 40 mmthreading cutting capacity:: M30 throat: 310 mmbore stroke: 175 mmspindle taper: MK 4 feed range - spindle: 20 - 400 mm/Uspindle turning speed range: 60 - 1250 / 120 -2500 U/mintransmission ratio: 2 Stufencolumn diameter: 120 mmtable surface area: 550 x 400 mmtotal power requirement: 1,5 / 3,0 kWweight of the machine ca.: 0,45 tdimensions of the machine ca.: 0,7 x 1,4 x 2,0 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection hood with microswitch- CE markThe data for this ad w ...
thread dia.: M5 - M16 mm: 250 U/min.: 48 Nmair pressure: 6 - 8 barworking area: 150 - 1900 mmThe pneumatically driven D-JSC tapping machine has, among other things, oneAir motor with quick chuck and a stable and flexibleLabor arm.The mounting arm can be attached directly to the work table using the mounting flangeand is ready to work immediately. This means fast changeover timesguaranteed.It is possible to simply tap the tap to the desired holeto be attached without having to position the component under the tap.Version with an adjustable angle, whereby the quick chuckcan tilt so that horizontal tapping is also possible.Pneumatic tapping machines for M5 - M16 threads, angle adjustable.6 pcs. Quick change chucks with slip clutch.Optional:- Clamping table with T-slots: 750x600x650mm or 990x700x800mm.- magnetic base.The data for this ad was created with ModulMWS - the software solution of L ...
Motor output: - kWDimensions (L/W/H): - mmVertikal stroke: - mmTable dimensions: - mmDust suction hood: - mmDiameter of the saw arbor: - mmLength of the rolling table: - mmSawblade tiltable: - °milling stroke vertical: - mmtotal power requirement: - kwWeight: - kgSpindle diameter: - mmLength of the planing table: - mmNumber of heads vertical: St.Number of heads horizontal: St.Number of milling agregates: St.Number of knives: St.Number of sanding units: st.Number of spindles: St.Number of spindle head vertical: St.Number of spindles head horizontal: St.Number of milling spindles: St.0: St.Number of tools: St.Working width: mmYear: 0Speed of boring spindles: U/min.Required air-pressure: barDowel insertingunits: St.Electrical height adjustment: 0Working height: mmWorkpiece length min.: mmAir consumption: m³/hPositions adjustment of boring unit: mmPositions adjustment ...
bore capacity in steel (diameter): 40 mmthroat: 290 mmbore stroke: 130 mmspindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min: 520 mm: 230 mmtable surface area: 730 x 210 mmconnected load frequency: 400 Vtotal power requirement: 1,1/1,5 kWweight of the machine ca.: 0,32 tdimensions of the machine ca.: 1,1 x 0,9 x 1,15 mdomestic equipments• Digital depth gauge• Adjustable guides with wedges• Large 12-speed range from 75 to 3200 rpm• Smooth running due to hardened and ground gears running in an oil bath •• Right-left rotation• Prismatic guides in all axes• Gear head can be swiveled 90 °• Chip protection with safety circuitMachine base optional.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: 12 mm: 375 U/min.working area: 180 - 1000 mmengine output: 0,7 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel: 30 mmthreading cutting capacity:: M20 throat: 260 mmbore stroke: 125 mmspindle taper: MK 3 spindle turning speed range: 80 - 1440 / 180 -3200 U/mintransmission ratio: 2 Stufencolumn diameter: 110 mmtable surface area: 500 x 365 mmtotal power requirement: 0,8 / 1,4 kWweight of the machine ca.: 0,27 tdimensions of the machine ca.: 0,4 x 1,2 x 1,9 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection hood with microswitch- CE markThe data for this ad was created with ModulMWS - the soft ...
bore capacity in steel (diameter): 25 mmthroat: 170 mmbore stroke: 50 mm: 16 mmspindle taper: MK 3 spindle turning speed range: 50 - 3000 U/min: 280 mm: 155 mmtable surface area: 500 x 180 mmconnected load frequency: 230 Vmax. distance between table and spindle-nose: max. 320 mmtotal power requirement: 0,8 kWweight of the machine ca.: 150 Kgdimensions of the machine ca.: 670 x 550 x 910 mDrilling and milling machine with- variable spindle speed- Digital depth display- Left / right switch- Cross support- swiveling spindle head- Feeds via hand crank- Tool case with contentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 60 mmthroat: 400 mmbore stroke: mmtotal power requirement: 4,4 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 16 mmthroat: 180 mmbore stroke: 85 mmspindle taper: MK 2 spindle diameter: 47 mmspindle turning speed range: 320 - 3300 U/min: 230 mm: 100 mmtable surface area: 420 x 155 mmconnected load frequency: 230 V: 900 x 600 x 300 cmtotal power requirement: 0,75 kWweight of the machine ca.: 8o Kgdimensions: 0,7 x 0,7 x 0,8 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmarm length: 1000 mmworkpiece height max.: 1400 mmtotal power requirement: 6 kWweight of the machine ca.: 3.700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 290 mmbore stroke: 115 mmspindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min: 350 mm: 130 mmtable surface area: 590 x 190 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmfeed: 0,1 - 0,18 - 0,26 mm/Utotal power requirement: 1,1 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 0,7 x 0,95 x 1,75 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: M3 - M12 metrisch: 400 U/min.0: 6 - 8 barworking area: max. 1100 mmweight: 15 kgdimensions: 700 x 280 x 200 mmPneumatic tapping machineType with an adjustable angle, horizontal tapping possiblePneumatic tapping machines for M3 - M12 threads, angle adjustable.8 pcs. quick-change chuck with slipping clutch.Documentation in English!Optional: clamping table with grooves type: FL-WBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Кількість шпинделів: 4 Ємність отвору в сталі (діаметр): 23 ммХід отвору: 150 ммЗагальна потреба в потужності: кВтВага машини приблизно : tРозміри машини К.:
bore capacity in steel (diameter): 45 mmthroat: 230 mmbore stroke: 125 mmspindle taper: ISO 30 spindle turning speed range: 75 - 1600 U/minmax. milling cutter diameter: 80 mm: 560 mm: 230 mmtable surface area: 800 x 240 mmmax. distance between table and spindle-nose: 460 mmconnected load frequency: 230 Vtotal power requirement: 1,1 kWweight of the machine ca.: 320 Kgdimensions of the machine ca.: 1,0 x 0,8 x 1,45 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 750 mmy-travel: 560 mmz-travel: 600 mmControl: HEIDENHAIN iTNC 530 total power requirement: 70 kWweight of the machine ca.: 11.000 kgdimensions of the machine ca.: mD E C K E L M A H O (Germany)Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision workModel DMC 75 V LINEAR Year 2005_______________________________________________________ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mmTable clamping size 950 x 650 mmMax. Table load 1.000 kgMax. height of workpiece 60 ...
thread dia.: M3 - M16 mm: max. 187 U/min.working area: 180 - 1000 mmengine output: 0,7 kWweight: 22 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 560 mmz-travel: 560 mmControl: SIEMENS 840 C total power requirement: 12 kWweight of the machine ca.: 10000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Кількість шпинделів: - Ємність отвору в сталі (діаметр): - Хід отвору мм: - ммЗагальна потреба в потужності: - кВтвага машини бл.: - тГабарити верстата бл.: -
thread dia.: M3 - M16 metrisch: 312 U/min.working area: max. 1100 mmengine output: 0,6 kWweight: 30 kgdimensions: 700 x 600 x 200 mmElectric tapping machines for M3 - M16 threads,Angle adjustable.Quick-change chuck with slip clutch.Adjustable via display:variable speed, adjustable depth, material selection, choice ofMain direction of rotation, thread selection.Documentation in English!Options:Clamping table with grooves Type: FL-WBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mmy-travel: 380 mmz-travel: 300 mmControl: FANUC total power requirement: 12 kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1000 mmy-travel: 800 mmz-travel: 700 mmControl: HEIDENHAIN iTNC 530 total power requirement: 50 kWweight of the machine ca.: 16 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmthroat: 320 mmbore stroke: 160 mmspindle taper MT: 4 MKtable:: 500 x 420 mmcolumn diameter: 120 mmturning speeds: 85 - 1800 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Utotal power requirement: 0,85 / 1,5 kWweight of the machine ca.: 500 kg.range L-W-H: 965 x 515 x 1920 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-хід: 630 ммy-хід: 550 ммz-хід: 500 ммзагальна потреба в потужності: 10 кВтвага машини ca.: tрозміри машини ca.: m
bore capacity in steel (diameter): 40 mmthroat: 290 mmbore stroke: 130 mmspindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min: 500 mm: 230 mmtable surface area: 720 x 210 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,1 x 0,9 x 1,2 mdomestic equipments• Digital display• Digital depth gauge for quill• Adjustable guides with wedges• Large 12-speed range from 75 to 3200 rpm• Smooth running due to hardened and ground gears running in an oil bath •• Right-left rotation• Prismatic guides in all axes• Gear head can be swiveled 90 °• Chip protection with safety circuitMachine base optional.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmthroat: 320 mmbore stroke: 155 mmspindle taper MT: 4 MKtable:: 500 x 420 mmcolumn diameter: 120 mmturning speeds: 125 - 3030 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Utotal power requirement: 1,2 kWweight of the machine ca.: 540 kg.range L-W-H: 0,8 x 0,55 x 2,2 mm• machine base for clamping high workpieces• Digital Depth Gauge• Gearbox swivels 180 °• silent running through geärtete, ground oil-cooled gears• Tapping Function• electromagnetic clutch for drill feed• automatic feed• electric drive for table height adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel: 30 mmthreading cutting capacity:: M20 throat: 260 mmbore stroke: 125 mmspindle taper: MK 3 feed range - spindle: 0 mm/Uspindle turning speed range: 80 - 1440 / 180 -3200 U/mintransmission ratio: 2 Stufencolumn diameter: 110 mmtable surface area: 500 x 365 mmtotal power requirement: 0,8 / 1,4 kWweight of the machine ca.: 0,27 tdimensions of the machine ca.: 0,4 x 1,2 x 1,9 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection hood with microswitch- CE markThe data for this ad was crea ...
Ємність отвору в сталі (діаметр): 10 ммГорловина: 0 ммХід отвору: ммЗагальна потреба в потужності: кВтВага машини приблизно : tРозміри машини бл.:
core drilling diameter max.: 6 mmbore depth: 350 mmswing diameter: mmtotal power requirement: 15 kWweight of the machine ca.: 3500 kgdimensions of the machine ca.: 5000 x 1200 x 2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
