преси б/у для продажу (1,651)

pressure:160 tthroat:360 mmstroke:200 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:920 x 700 mmHole in the table:150 mmtable height over floor:960 mmpassage to the back:590 mmram surface:620 x 560 mmspeed down:390 mm/sspeed up:390 mm/sworking speed:58 mm/spower requirement:30,0 kWweight:16,0 tdimensions (WxDxH):1,6 x 2,5 x 3,6 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanisch

pressure:2000 tdistance between columns:975 mmstroke:400 mmdistance table/ram, max. stroke up, adjustment up:1000 mmtable surface area:1015 x 1050 mmtable height over floor:800 mmcapacity of ejector in table:6,3 tejector stroke in table:100 mmcapacity of ejector in ram:65 tejector stroke in ram:100 mmram surface:975 x 1050 mmreturn capacity:150 tspeed down:235 mm/sspeed up:250 mm/sworking speed:5 - 20 mm/soil volume:4000 lheight over floor:3,65 mheight beneath floor:3,75 mpower requirement:194,0 kWweight:105,0 tdimensions (WxDxH):5,0 x 6,5 x 7,4 m

pressure:100 tdistance between columns:1000 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:980 x 700 mmpressure of drawing cushion in table:4 x 10 / 1 x 20 tstroke of drawing cushion in table:180 mmtable height over floor:800 mmside window:400 mmram surface:1000 x 700 mmspeed down:500 mm/sspeed up:450 mm/sworking speed:60 mm/spower requirement:40,0 kWdimensions (WxDxH):1,5 x 1,4 x 4,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:4 x 10 t + 1 x 20 t, getrennt einschaltbar foundation pit:nicht erforderlich

pressure:200 tdistance between columns:970 mmstroke:360 mmDistance table/ram, max. stroke up, adjustment up:630 mmtable surface area:1000 x 800 mmcapacity of ejector:10 tejector stroke in table:160 mmtable height over floor:850 mmside window:400 mmram surface:1000 x 800 mmspeed down:420 mm/sspeed up:410 mm/sworking speed:50 mm/soil volume:1240 lreturn capacity:24 tpower requirement:45,0 + 15,0 kWweight:16,0 tdimensions (WxDxH):2,7 x 2,5 x 4,3 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:mechanisch foundation pit:nicht erforderlich

nominal force:160 tstroke:140 mmno. of strokes:85 /mindistance between columns:400 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:400 x 450 mmtable height over floor:800 mmAllowed max. force:230 tram surface:400 x 320 mmspindle diameter:125 mmpower requirement:7,35 kWweight:5,0 tdimensions (WxDxH):1,7 x 1,2 x 2,9 m

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 76820 €: 1451.9 €: 160 to: 4050 mm: Y1 / Y2 und X Achse : 200 mm: 3600 mm: 300 mm: 430 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 620 mm: 250 mm/s: 858 mm: 104 mm: 15 kW: 4850 mm: 1900 mm: 2610 mm: 10500 kg3 axes (Y1, Y2, and X axis)CNC control DT-10- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBCNC controlled back gauge with linear guide and ball screw spindlesCNC crowning tableintermediate clamps for upper toolupper tool1010/A/75°/0,8, sectioned,bending radius hardened a ...

pressure:063 tthroat:450 mmstroke:8 - 100 mmno. of strokes:65 /mindistance table/ram, max. stroke up, adjustment up:415 mmtable surface area:720 x 800 mmhole in the table:280/250 mmtable height over floor:800 mmpassage to the back:290 mmram surface:450 x 280 mmram adjustment:63 mmpower requirement:7,5 kWweight:4,7 tdimensions (WxDxH):1,3 x 2,0 x 2,65 mclutch:pneumatisch overload protection in ram:mechanisch

Pressure:063 tthroat:400 mmstroke:16 - 90 mmno. of strokes:60 /mindistance table/ram, max. stroke up, adjustment up:350 mmtable surface area:1000 x 750 mmhole in the table:260 x 140 mmtable height over floor:710 mmram surface:600 x 220 mmram adjustment:50 mmweight:4,3 tdimensions (WxDxH):1,1 x 2,6 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatisch overload protection in ram:mechanisch ram counterbalance:pneumatisch

pressure:100 tthroat:540 mmstroke:560 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:1000 x 1000 mmpressure of drawing cushion in table:50 tstroke of drawing cushion in table:200 mmdie cushion area:710 x 650 mmtable height over floor:910 mmram surface:1000 x 1000 mmcapacity of ejector in ram:2 tejector stroke in ram:200 mmreturn capacity:19,5 tspeed down:400 mm/sspeed up:300 mm/sworking speed:57,7 mm/soil volume:650 lpower requirement:37,5 kWweight:15,0 tdimensions (WxDxH):1,5 x 2,5 x 4,45 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion / ejector in table:hydraulisch ejector in ram:hydraulisch depth stop:mechanisch

pressure:40 tthroat:360 mmstroke:500 mmdistance table/ram, max. stroke up, adjustment up:660 / 1000 mmtable surface area:630 x 500 mmhole in the table:200 mmtable height over floor:1060 / 720 mmram surface:450 x 360 mmspeed down:60 mm/sspeed up:300 mm/spower requirement:7,5 kWweight:2,75 tdimensions (WxDxH):1,0 x 1,8 x 3,05 madditional plate in table:height approx. 340 mm

pressure:050 tthroat:255 mmstroke:8 - 120 mmno. of strokes:115 /mindistance table/ram, max. stroke up, adjustment up:380 mmtable surface area:640 x 500 mmhole in the table:250 x 180 mmtable height over floor:710 - 930 mmtable adjustable:220 mmram surface:550 x 170 mmram adjustment:70 mmpower requirement:4,0 kWweight:3,1 tdimensions (WxDxH):1,5 x 1,5 x 2,3 m

: neu : ca. 10 Wochen ab Auftrags : Türkei : 127400 €: 2407.86 €: 220 to: 4050 mm: Y1 / Y2 / X und R Achse : 265 mm: 3600 mm: 410 mm: 530 mm: hydraulisch : 200 mm/s: 12 mm/s: 180 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 104 mm: 5250 mm: 1770 mm: 2900 mm: 15000 kg1 SERVO MOTOR AND PUMP PER CYLINDERStandard accessories:4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportati ...

pressure:150 tdistance between columns:300 mmstroke:180 mmdistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:570x180 / 300x410 mmtable height over floor:875 mmside window:180 mmram surface:180 mmspeed down:250 mm/sspeed up:160 mm/sworking speed:6 - 12 mm/soil volume:250 lpower requirement:11,0 kWweight:2,4 tdimensions (WxDxH):1,3 x 1,3 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 foundation pit:nicht erforderlich

: neu : 2026 : 080198 : Mai 2026, Zwischenverkauf : Türkei : 106178 €: 1806.84 €: 95600 €: 175 to: 3050 mm: Y1 / Y2 / X / R Achse : 265 mm: 2600 mm: 410 mm: 530 mm: hydraulisch : 200 mm/s: 10 mm/s: 200 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 104 mm: 2 x 4 kW: 4250 mm: 1700 mm: 2750 mm: 10900 kg1 SERVO MOTOR AND PUMP PER CYLINDERStandard accessories:4 axes (Y1, Y2,X and R)Color graphics control Delem DA 66 S- 2D graphical touch screen programming mode- 3D machine representation, in simulation and production- 24", high resolution color TFT- Delem Modusys compatibility (module scalability and adaptivity)- USB, peripheral interfacing- User specific application support within the control&apos,s multitasking environment- Sensor bending &, correction interface- Profile-S2D offline softwareservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double ...

pressure:40 tthroat:360 mmstroke:400 mmdistance table/ram, max. stroke up, adjustment up:600 mmtable surface area:620 x 500 mmpressure of drawing cushion in table:16 tstroke of drawing cushion in table:150 mmtable height over floor:850 mmram surface:300 x 250 mmspeed down:200 mm/sspeed up:200 mm/sworking speed:40 mm/spower requirement:11,0 kWweight:2,8 tdimensions (WxDxH):1,1 x 1,7 x 3,0 mdrawing cushion in table:hydraulisch

pressure:63 tthroat:320 mmstroke:200 mmdistance table/ram, max. stroke up, adjustment up:450 mmtable surface area:750 x 600 mmpressure of drawing cushion in table:6,5 tstroke of drawing cushion in table:80 mmdie cushion area:240 mmtable height over floor:800 mmram surface:500 x 450 mmcapacity of ejector in ram:0,5 tejector stroke in ram:70 mmspeed down:300 mm/sspeed up:300 mm/sworking speed:50 mm/soil volume:380 lpower requirement:12,0 kWweight:6,5 tdimensions (WxDxH):1,3 x 2,0 x 2,75 mdrawing cushion in table:hydraulic ejector in ram:hydraulic depth stop:mechanical cutting impact cushioning:hydraulic

: neu : ca. 4 Monate ab Auftragse : Italien : 71300 €: 1347.57 €: 60 to: 500 mm: 800x500 mm: 600 mm: 120 mm/s: 8 mm/s: 58 mm/s: 5.5 kW: 1100 mm: 1100 mm: 2350 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 8319 : prompt, Zwischenverkauf v : Türkei : 77982 €: 1326.78 €: 1 : 70200 €: 200 to: 3050 mm: Y1 / Y2 / X und R Achse : 210 mm: 2550 mm: 250 mm: 445 mm: hydraulisch : 100 mm/s: 7 mm/s: 73 mm/s: 620 (mit optionaler R-Ach mm: 250 mm/s: 858 mm: 104 mm: 150 l: 15 kW: 3750 mm: 1390 mm: 2500 mm: 8160 kg4 axes (Y1, Y2, X and R axis)CNC control DT-10- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBCNC controlled back gauge with linear guide and ball screw spindlesCNC CONTROLLED CROWNING TABLEintermediate clamps for ...

pressure:050 tthroat:250 mmstroke:8 - 120 mmno. of strokes:100 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:650 x 515 mmhole in the table:115 mmtable height over floor:790 - 1020 mmtable adjustable:230 mmram surface:390 x 180 mmram adjustment:70 mmpower requirement:2,0 kWweight:2,6 tdimensions (WxDxH):1,1 x 1,4 x 2,2 moverload protection in ram:mechanical

pressure:200 tdistance between columns:1050 mmstroke:150 mmdistance table/ram, max. stroke up, adjustment up:450 mmtable surface area:1000 x 1200 mmtable height over floor:850 mmside window:500 mmram surface:1050 x 870 mmspeed down:300 mm/sspeed up:300 mm/sworking speed:18 - 36 mm/spower requirement:37,0 kWweight:16,0 tdimensions (WxDxH):4,0 x 3,6 x 3,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulisch cutting impact cushioning:hydraulisch foundation pit:nicht erforderlich

pressure:100 tthroat:315 mmstroke:30 - 160 mmno. of strokes:40 /mindistance table/ram, max. stroke up, adjustment up:460 mmtable surface area:910 x 680 mmHole in the table:400 mmtable height over floor:800 mmpassage to the back:400 mmram surface:630 x 400 mmram adjustment:80 mmpower requirement:7,5 kWweight:7,5 tdimensions (WxDxH):1,7 x 2,0 x 3,0 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical ram counterbalance:pneumatic

pressure:080 tthroat:300 mmstroke:8 - 112 mmno. of strokes:60 /mindistance table/ram, max. stroke up, adjustment up:467 mmtable surface area:710 x 560 mmhole in the table:240 x 115 mmtable height over floor:800 mmram surface:400 x 315 mmram adjustment:80 mmpower requirement:7,5 kWweight:5,1 tdimensions (WxDxH):1,4 x 1,9 x 2,7 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical

pressure:060 tthroat:220 mmstroke:6 - 94 mmno. of strokes:115 /mindistance table/ram, max. stroke up, adjustment up:340 mmtable surface area:680 x 400 mmhole in the table:120 x 70 mmtable height over floor:750 mmpassage to the back:290 mmram surface:240 x 240 mmram adjustment:57 mmpower requirement:3,7 kWweight:2,8 tdimensions (WxDxH):1,5 x 1,5 x 2,2 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic

pressure:100 tdistance between columns:1180 mmstroke:1 - 120 mmno. of strokes:90 /mindistance table/ram, stroke up:470 mmtable surface area:1100 x 700 mmtable height over floor:800 mmside window:400 mmram surface:740 x 350 mmram adjustment:100 mmpower requirement:37,0 kWweight:11,0 tdimensions (WxDxH):2,3 x 2,0 x 3,5 mknuckle-joint press:hydraulisch angetrieben T-slots in table and ram acc. to specification:auf Anfrage foundation pit:nicht erforderlich

Pressure:630 tdistance between columns:1600 mmstroke:fix 250 mmno. of strokes:20 /mindistance table/ram, max. stroke up, adjustment up:900 mmtable surface area:1550 x 1200 mmtable height over floor:800 mmside window:620 mmram surface:1360 x 1200 mmram adjustment:160 mmheight over floor:5,9 mheight beneath floor:0,6 mpower requirement:32,0 kWweight:59,0 tdimensions (WxDxH):3,0 x 2,2 x 6,5 mclutch:pneumatisch overload protection in ram:hydraulisch ram adjustment:motorisch ram counterbalance:pneumatisch

: neu : 2024 : 7307 : prompt, Zwischenverkauf v : Italien : 11400 €: 197.76 €: 1 : 10300 €: 100 to: horizontal verschiebbar : 500 mm: 900 mm: 1050 mm: 25 mm/s: 2 mm/s: 2 kW: 1900 mm: 1000 mm: 2400 mm: 1250 kg: 650 mmSTROKE 500 MM2 speedsmachine table can be liftet with chainscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive overload protection in ram:hydraulic ram adjustment:motoric tool changing unit:2 x