We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
бувша у використанні
Description: • Multi drilling machine, dowel drilling machine • Serial number 207/78/2 • Total installed power 6 KW • Maximum distance between vertical heads approx. 700 mm • Minimum distance between vertical heads approx. 160 mm • 1 x horizontal drilling head with 20 spindles, pitch 32 mm, maximum drilling depth approx. 70 mm • 2 x vertical drilling heads with 15 spindles each, pitch 32 mm, motor 1.47 KW • 2 pneumatic clamps • Accioning by pedal • Dimensions for transport 1550 x 1550 x 1700 mmApprox. Onsite Dimension. (l x w x h): 1,550 x 3,200 x 1,520 mm, weight approx.: 800 kg
бувша у використанні
Description: Eccentric connector drilling / cup hinge drilling Connector drilling Hole line system / Frame drilling 4 clamps / 4 hold-down devices Technical data: Motor: 1.5 kW Spindle speed: 2800 rpm Max. clearance between the side stops: 750 mm Working height: 850 mm Clamping height max. workpiece thickness: 100 mm max. hole row position dimension: 300 mm Tool shank diameter: 10 mm Weight: approx. 390 kg Space requirement (depth width height): 115x120x125 PRICING IN OVERHAULED CONDITION SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. If objects can be seen in the photo that are not expressly listed in the lot description, these are not part of the sale. part of the sale. This naturally also applies to tools ...
бувша у використанні
Description: • Multi drilling machine, dowel drilling machine • Drilling head with 27 spindles • Distance between spindles 32 mm • Total distance between first and last spindle 832 mm • Working table dimensions approx. 1070 x 360 mm • Motorized tilting head: 0° - 90° • Motor 1.84 KW-2850 rpm • 3 pneumatic clamps • Actuating by pedalApprox. Onsite Dimension. (l x w x h): 1,250 x 1,000 x 1,300 mm, weight approx.: 500 kg
бувша у використанні
Description: Gluing System EVA Hotmelt Corner Rounding Unit , Max Panel Width 210 mm Min. panel height 10 mm Max. panel height 30 mm Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mm Edge coil magazine , NO. EDGE PROCESSING UNITS 1 Processing Unit : fine trimming to trim and roundApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
бувша у використанні
Description: Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mmApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
бувша у використанні
Description: Min. panel length 110 mm Max. panel length 800 mm Max. panel width 1250 mm No. Top clamps 6 no. bottom vertical units 1 with positioning by NC spindles for vertical boring 1 No. injectors 2 No. storage tank 1 Item inserted wooden dowels Control system KOCH NUMERIC Safety standard CE mark Safety photocellsApprox. Onsite Dimension. (l x w x h): 3,000 x 1,750 x 2,200 mm, weight approx.: 3,000 kg
бувша у використанні
Description: Min. panel length 150 mm Max. panel length 800 mm Min. panel width 230 mm Max. panel width 3200 mm Max. forward feed speed 70 m/min No. Top clamps 4 no. bottom vertical units 6 , motor power 1.3 KW r.p.m. 7000 RPM No. injectors 6+6 No. storage tank 2 Item inserted , wooden dowels , wooden dowels 8/10 mm TOOLS NOT INCLUDEDApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
бувша у використанні
ORF Універсальний 5 Шпинделі
бувша у використанні
Дюбель-свердлильний верстат Schleicher Універсальний свердлильний верстат Тип BORFIX З поворотним свердлом Дриль-редуктор з 9 свердлами 1,5 кВт 2 пневматичні тримачі заготовок Свердла зверху і ззаду Розмір подушки 1000 мм х 530 мм Довжина стопорної рейки 2000 мм Вага з піддоном 185 кг Розміри відправлення 1200 x 1020 x В 1700 мм
бувша у використанні
Модель свердлильного верстата СКМ ТОП29: - 29-шпиндельна головка з швидкороз'ємним з'єднанням - Регульоване свердління від 0 до 90° від верхньої вертикалі до горизонталі - Моторизований рух свердлильної головки - 6-позиційний револьвер глибини свердління - 4 пневматичні затискачі для утримання деталей - в комплекті з алюмінієвими направляючими ДОСТУПНІСТЬ З КВІТНЯ 2024 РОКУ
бувша у використанні
Description: For drilling of glazing bars and frames, door components and sash joints 10 different drilling programmes Drilling head with 2 spindles Drilling stroke: max 80 mm Pneumatic workpiece hold-down device Right and left length stop  ,drilling units horizontal: 1 pieces, packing measure approx (l x w x h): 1,300 x 1,400 x 1,650 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 1,400 x 1,600 mm, weight approx.: 400 kg
бувша у використанні
Description: Max. panel width 1300 mm No of Bottom Units 1 No of injectors 1 bottom vertical units horizontal units Max. panel width 1300 mm No. Top clamps 4 spindles for horizontal boring 2  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , motor power 0.55 KW r.p.m. 2700 RPM Item inserted yes wooden dowels wooden dowels 10X50 Safety standard CE mark  ,  ,  ,  ,  ,  ,  , ,Approx. Onsite Dimension. (l x w x h): 3,250 x 1,900 x 1,800 mm, weight approx.: 1,500 kg