Тип обладнання
(Кількість: > 9)
Тип обладнання
(Кількість: > 2)
Heavy signs of wear, complete but limited functionality, in need of repair The cleaning trolley is used to take over the tunnel housings in the lock area and is intended for transport to the washing area. When lowering the tunnel housings onto the cleaning trolley with the help of the hydraulic rescue vehicle, care must be taken to ensure that the vehicle is approached in the middle and that the tabs on the underside of the tunnel housing are then located in the inner area of the car frame. On the one hand, this achieves a secure support and on the other hand, it automatically prevents slipping off the table. By releasing the lock, the contact surface can be tilted to allow washing-up water to drain into the tunnel. The desired tilting behaviour (centre of gravity definition) can be adjusted by means of axis shift. The cleaning trolley also has two steerable locking rollers, which can be ...
In working order. Battery also still in good condition, without charger. Operating hours: 12342h. Length spoons 195cm Auction-ID: A3-46115-4254
- Clamping width up to 169 cm - Clamping width at least 45 cm - ISO FEM 2 Auction-ID: A3-46118-13412
No loading or dismantling: The seller will not provide any loading aids or dismantling work for this lot. Dismantling and removal will be carried out exclusively by the buyer at his own risk ATTENTION Pick-up for this lot is only possible on 23 and 24/11/2026, after this date NO pick-up is possible This lot has not been checked for functionality. The seller does not assume any warranty for the condition and functionality of the lot ; Parts may be damaged or missing. The quantities, dimensions, weights and other data given are to be understood as non-binding guideline values. No liability is assumed for the correctness of the information ; The respective dimensions can be seen in the photos ; Auction-ID: A1-51909-49
Heavy signs of wear, complete but limited functionality, in need of repair The cleaning trolley is used to take over the tunnel housings in the lock area and is intended for transport to the washing area. When lowering the tunnel housings onto the cleaning trolley with the help of the hydraulic rescue vehicle, care must be taken to ensure that the vehicle is approached in the middle and that the tabs on the underside of the tunnel housing are then located in the inner area of the car frame. On the one hand, this achieves a secure support and on the other hand, it automatically prevents slipping off the table. By releasing the lock, the contact surface can be tilted to allow washing-up water to drain into the tunnel. The desired tilting behaviour (centre of gravity definition) can be adjusted by means of axis shift. The cleaning trolley also has two steerable locking rollers, which can be ...
new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug and 160A Rema plug officially for batteries with 300-500Ah, but works up to 800Ah Delivery by freight forwarder possible on request. Auction-ID: A1-51819-4851
Foreign buyers get the 19% VAT back from the auction house immediately after the machine is exported Voltage measured at rest with 50.2V . Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-51819-1039
Suitable for small load carriers 600x400 mm, stackable, 2 steered castors and 2 rigid castors, ESD compatible, max. load capacity 250 kg Auction-ID: A1-51646-32
Foreign buyers get the 19% VAT back from the auction house immediately after the machine is exported Voltage at rest measured at 50.2V . LxWxH = 83x63x63cm Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-51819-1133
Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-51819-3729
Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-18
Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-27
Youtube function video: https://youtube.com/shorts/OBVDwbD3IUk FEM3 (approx. 50cm): Fits any forklift with a payload of 3,000-5,000kg Fork length: 120-200cm Auction-ID: A1-51819-1174
Foreign buyers get the 19% VAT back from the auction house immediately after the machine is exported Voltage measured at rest with 25.78V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-51819-1123
new and unused charger in orig. for batteries with 500-700Ah possible with 400V 16A and Rema 160A plug Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-51819-8010
Consisting of 3 individual FIFO shelving elements of different dimensions (1x 1350x2100x1800 mm, 1x 1350x2050x1800 mm, 1x 1350x1520x1800 mm) Auction-ID: A1-51646-60
New Metallo pallet truck / pump truck Hand pallet truck 2500 kg - Lifting capacity: 2,500 kg - Fork length: 1,200 mm - Fork width: 540 mm - Drive: Manual - Fork wheels: Polyurethane, tandem/double - Steering wheel: Polyurethane - Ergonomic handles - Color: Yellow Auction-ID: A3-46115-5563
500 € 
