Dowel and slotted hole drilling machine HOFFMANN HT 200
very good condition, the machine comes from an educational
institution, has been used only a little and is as good as new, it has
very few signs of use
this allows slotted holes to be milled and dowel holes to be drilled,
and the drilling height can be read very precisely on a digital
counter
with 3 drill bit holders: for drills with M10 external thread and for
drills with 12mm and with 16mm shank, plus you get a 2-jaw chuck for
drills from 3- 20mm
with workpiece auxiliary supports on the left and right, which can be
swivelled and have a carrier roller
the machine has a landing gear
with 2 angle stops on the machine table for left and right
The clamping arms can be moved and moved
with stake-out device for parapet railings, which is adjustable from
80-160mm and has a digital counter, with pick-up mushroom
380V, 1400 and 1800W through the 2 speed ranges
1350 and 2770rpm
Year of manufacture 1997
Weight: approx. 280kg
with the machine you can mill slotted holes for e.g. lock cases and
similar things or make all kinds of frame and dowel connections, at
right angles, blunt and mitred
ideal for the production of dowel joints in timber frame construction,
furniture, doors, windows and stairs construction and for similar
things
the drilling unit can be swivelled on both sides up to 65° and has a
grid at 0°, which means that the machine can also be used to drill
railing rods into stair stringers very well
due to the 2 speed ranges, drills with large diameters can also be
used without burning immediately when drilling
due to the grids and stops and the design of the machine, dowel
connections are made in the shortest possible time, which makes the
machine very economical
the machine requires a compressed air connection of 6bar (the air
consumption is very low)
Clockwise
Mills and drills very well and cleanly
workpiece clamping is carried out with 2 pneumatic clamping cylinders
by foot pedal
The linear laser at the top of the machine allows torn dowel holes and
inclinations to be drilled very quickly and accurately
with a precision 12mm grid rail, which has a center grid and 13 grids
left and right
with 2 adjustable stops on the left and right, so that the working
width for slotted holes can be adjusted
Working travel in width: max. 330mm
The max. drill hole height is 90mm
the max. drill hole depth is 200mm with stop
The max. workpiece height is 150mm
Everything works perfectly
with description
the machine will be delivered and demonstrated by us personally for
220.00 euros throughout Germany, so you have no risk when buying,
delivery to Austria and other countries is also possible on request
The machine table is 1100mm wide and 250mm deep
Professional equipment, no DIY store scrap
you can start working with the machine immediately
Very stable and durable construction
the precision guides with the backlash-free ball bearing bushings are
OK and go easily, the swivel mechanism is also very smooth due to a
ball bearing, the locking is possible with a locking screw
Німеччина
99974 Mühlhausen OT Eigenrieden 
