металообробні станки / фрезерні станки / Горизонтальні консольно-фрезерні верстати
Виробник: DMG MORI
Модель:NHX 4000
Тип техніки: Horizontal Console Milling Machines
Номер позиції: 170177448
Кількість: 1
Дата: 12.09.2026
Ціна:
Seller-item-No.:064148
| General | |
| Horizontal machining center; Control: Siemens S840Dsl with CELOS | |
| Characteristics | |
| Speed max. | -15000 rpm |
| Dimensions (L x W x H) | 2,68 x 4,19 x 2,54 m |
| Max. tool length | 450 mm |
| Spindle taper | HSK-A 63 |
| Tool Magazine with | 60 Positions |
| Rapid feed X / Y / Z | 60/60/60 m/min |
| Movement X / Y / Z | 560/560/660 mm |
| Palett changer with | 2 Pallet |
| Max. work piece height | 900 mm |
| Max. work piece diameter | 630 mm |
| Maximum load (table centre) | 400 Kg |
| Swivelling range | 360x1 degree |
| Table size | 400x400 mm |
| Drive power (40% DC) | 46 kW |
| Drive power (100% DC) | 30 kW |
| Weight approx. | 8500 Kg |
| High-torque spindle 46 /30 kW, 15,000 min-1 | High-torque spindle 46 /30 kW, 15,000 min-1 (SIEMENS) |
| Preparation for Center Through-spindle coolant system | Center Through-Spindle Coolant System It can supply coolant through the holes of the spindle and tool. The coolant supply path to the tool tip is a center-through type. Effective for removing chips, cooling a machining point and prolonging a tool life. |
| Spindle Taper HSK-A63 | Spindle Taper HSK-A63 This specification uses the HSK-A63 tool holder. |
| Full 4th axis rotary table (STD) | Full Rotary B-Axis Specifications (Standard Specification) Minimum pallet indexing angle is 0.001 °. It is applicable to the B-axis index machining and simultaneous 4-axis machining. The High torque DD (direct drive) motor enables high-speed and high-p |
| Without Auto-Coupler Hydraulic Fixture Interface | Without Auto-Coupler Hydraulic Fixture Interface There is no hydraulic supply function for the fixture. |
| Tool storage capacity 60 tools (STD) | Tool Storage Capacity 60 Tools (Standard) Ring type magazine Tool capacity: 60 tools (including one tool mounted in the spindle) Technical random address type Max. tool diameter: - With adjacent tools: f70 mm (dia.2.76 inch.) - Without adjacent tools: f17 |
| Chip conveyor outside machine (rear discharge, drum filter type) (STD) | External Chip Conveyor (Rear Discharge, Drum Filter Type) (Standard Specification) The scraper type chip conveyor efficiently discharges chips in the machine into the container (order separately) at the rear of the machine. The drum filter rotates durin |
| Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) | Through-Spindle Coolant System I/F (8 Steps Pressure) (Separate Type) I/F for mounting the high-pressure coolant system (separate type). Supplies the high-pressure coolant to the tool tip from the center of the spindle through the retention knob and the |
| Through-spindle coolant/ air (switching specifications) | Through-Spindle Coolant / Air (Switching Specifications) Supplies either coolant or air, which can be switched, to the tool tip through a hole in the spindle and tool. It is effective when switching between coolant and air according to machining. Control |
| Mist collector Interface (duct only, dia. 150 mm ) | Mist collector I/F (duct only, dia. 150 mm ) |
| Rotary window | Rotary window The rotary window is fixed inside the window at the machining side door. Glass disc of the rotary window rotates by air drive to remove coolant adhering inside of the window with centrifugal force. -Air drive system -Outer diameter: 239 mm |
| MPC (Machine Protection Control) | MPC (Machine Protection Control) It monitors vibration with acceleration sensors mounted on the spindle. This technology cycle stops the spindle to minimize the damage to the machine when abnormal vibration value is detected. It is also equipped with |
| Setting Unit mm | Setting Unit, MM The unit to be used for the screen display and program commands is set to millimeter (mm). Turning: MM specification for the turret Horizontal machining center: MM specification for the tapped pallet |
| Voltage of Customer Factory 380 V | Voltage of Customer Factory 380 V (SIEMENS) The SIEMENS specification machine is equipped with 400 V external units (servo motors and coolant pumps). A transformer is required according to an input voltage of each factory as below. - 380 |
| Frequency 50 Hz | Frequency 50 Hz This machine is shipped with frequency set to 50 Hz specification. (Caution) IF the setting is incompatible, there is a possibility of trouble such as operation abnormality and alarm occurrence. Be sure to check the supply voltage and fr |
| Special equipment | RMS-Sensor |
