металообробні станки / фрезерні станки / Фрезерні верстати з круглим столом
Виробник: DMG MORI
Модель:CTX gamma 3000 TC
Тип техніки: Round table milling machines
Номер позиції: 169847663
Кількість: 1
Дата: 11.07.2026
Ціна:
Seller-item-No.:071807
| General | |
| - partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min, - USB-interface, Ethernet-interface; Control: CELOS X with Siemens 840D SL Operate | |
| Working area | |
| Swing diameter over guide ways | 700 mm |
| Turning diameter | 700 mm |
| Distance between spindles | 3360 mm |
| Clamping chuck diameter max. | 630 mm |
| Bar diameter max. | 125 mm |
| Main drive 1 | |
| Drive power (100% DC) | 40 kW |
| Drive power (40% DC) | 52 kW |
| Speed range | - 2500 rpm |
| Max. torque (40% DC) | 2200 Nm |
| Torque (100% DC) | 1700 Nm |
| C-Axis Speed | 2500 rpm |
| Torque of C-Axis (holding torque) | 1700 Nm |
| Turning-milling spindle | |
| Spindle taper | HSK-A 63 DIN 69893 |
| Spindle speed | -20000 rpm |
| Drive power (100% DC) | 19 kW |
| Drive power (40% DC) | 22,5 kW |
| Torque (100% DC) | 85 Nm |
| locking moment | 1700 Nm |
| Torque (40% DC) | 120 Nm |
| Tool magazine | |
| Number of tools | 80 |
| Max. tool length | 400 mm |
| Max. tool diameter | 80 mm |
| Max. tool weight | 12 Kg |
| Floor space/Weight | |
| Dimensions (L x W x H) | 9,35 x 4,22 x 2,53 m |
| Weight approx. | 30000 Kg |
| Excentric turning and milling operation | Excentric turning and milling operation (only with Siemens control) |
| 5-axis simultaneus machining | 5-axis simultaneous machining |
| Interpolation turning | Turning-recessing cycle Manufacture of simple sealing Surfaces and grooves using turn/mill centers |
| Counter spindle centre | Complete machining of shaft components without process interruptions on turn/mill centers with counter spindle. Cycle for automatic exchange of a center into the counter spindle and back into the tool magazine. The centre is not included in the delivery |
| Technologie cycle alternating speed | Technology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control) |
| Tool sort cykle | Order of the tools in the chain magazine according to the respective call in editing program. Time-optimized sort in chain magazine by using the shuttle instead of the spindle. No relocation of multitools. |
| Tool Balance Assistant | Technology cycle for calculating and monitoring the maximum permissible rotational speed limit of the rotating tool used in the milling spindle. This rotational limit can be Automatically calculated in the cycle for each tool to be balanced, depending on |
| 3D quickSET (with toolkit) | 3D QuickSET for turn-mill machines - Toolkit (consisting of magnetic foot holder with measuring ball and dial gauge) - For review and correction of the kinematic accuracy of conventional turning and 5-axis simultaneous machining - Requires 5- |
| ATC | Application Tuning Cycle ATC - Demand-oriented adjustment of axis dynamics for machining tasks: accuracy (contour accuracy) / surface (smoothing) / speed (high dynamics) - Beneficial for turning-milling operations (2+1 / 3+2 / 5-axis simultaneous) |
| 5X Precision & Dynamics package | 5X Precision & Dynamics package, consisting of: - 5-axis simultaneous machining - 3D-QuickSET - ATC |
| Energy meter for Siemens 840 sl OP CELOS | Energy meter for 3D control Siemens 840D solutionline Operate with CELOS |
| Clamping with balanced pressure, main sp. | Balanced pressure clamping device for the main spindle |
| Clamping with balanced pressure, sub-sp. | Balanced pressure clamping device for sub-spindle |
| Coolant/compressed air switchable on spindle(s) | Cooling lubricant and compressed air switchable on the spindles by M-function Valid for: - Chuck rinsing device outside of the main and counter spindle - Coolant supply through the main and counter spindle Note: - Only valid if the corresponding |
| Dry machining | Turn-mill spindle with modified rotary feedthrough for machining in dry running and not with oiled air. |
| Turn./mill. spindle, 20.000 rpm | Turning-/milling spindle compactMASTER 1 with increased spindle speed, instead of standard - Max. spindle speed 20.000 rpm - Power 19/22.5 Kw (25.5/30.2 hp) (S1-100%d.c. / S3-40%d.c.-2min) - Torque 85/120 Nm (64.2/88.5 lbxft) (S1-100%d.c. / S3-40%d.c.-2mi |
| Y1-axis with hydraulic locking | Y1-axis with hydraulic locking Locking force 42 kN (9442 lbf) |
| Torque support, milling spindle | Torque support for the milling spindle for the use of angle heads or transmission gears |
| Steady rest slide NC control.CTXgamma 3000/3000TC | NC-Slide Z for steady rest carrier max. clamping range 460 mm (18.11 inch) including power supply for 1 steady rest |
| Tailstock function for the counter spindle | Tailstock function for the counter spindle incl. foot switch. Mechatronic control of the supporting force, selectable per program Feed force: 3 - 20 kN |
| Counter spindle ISM102Plus,Caxis instead tailstock | Counter spindle as integrated spindle motor ISM 102 Plus - drive power 40 / 52 (53.6 / 69.7 hp) - partial hollow clamping (hydraulic) - draw tube ID 104 mm (4.09 inch) - C axis and spindle brake (hydraulic) - basic slide (Z3), AC servo drive with ball s |
| BFU 8/20/80 bar, freq. con., 980 l, cooler | Compact coolant system, consisting of: - coolant tank, 980 litre - 8 bar/80 litre/min, 20 bar/40litre/min and 80 bar/11 litre/min with frequency-controlled pumps programmable via M- and H-functions coolant supply turning/milling spindle - t |
| Angled coolant nozzles for turn-milll spindle | Angled coolant nozzles for the turn-mill spindle for cooling short tools |
| Hinged typ chip conveyor | Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min |
| Workpiece touch probe RMP60, Renishaw | Workpiece touch probe RMP60, Renishaw - Interchangeable in turning/milling spindle - Probe reception and tracer point with data transfer between probe and receiver by radio signals - Incl. measuring cycle package Inspection Plus Note: Custom |
| Tool measuring device, BLUM with chain magazine | Tool measuring device make BLUM for fixed and rotating tools in the turning/milling spindle in combination with chain magazine |
| Protection Package | Protection Package consisting of: - MPC 1.0 - Macine Protection Control - Easy Tool Monitor 2.0 |
| Chain magazine for 80 tools HSK-A 63 | Tool magazine, 80-fold chain magazine instead of 36-fold disc magazine, tool reception HSK-A 63 DIN 69893 |
| Electrical interface for Robo2Go | Electrical interface standard Profibus for Robo2Go (Only at Siemens control) Incl. - Additional compressed air supply - Additional Ethernet interface - Power supply of the robot by the machine - User interface integrated into CELOS (with CELOS 3 as |
| Package for tropical climate (ambient temp.50ºC) | Package for tropical climate for ambient temperature of max. 50ºC, consisting of cooling system for control cabinet (until 50º) and machine |
| Design version BLACK | Design version BLACK Working area door, front cover beneath Working area door and front pane frame in colour deep black |
| 3D data model of working area on CD (Step a.IGES). | 3D data model of working area of specified machine as data format Step and IGES. Delivery of 3D data model will be by CD. |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
| Special equipment | RMS-Sensor |
| DMG MORI | CTX beta 800 | ||
| DMG MORI | CTX beta 1250 TC | ||
| 2012 | DMG MORI | CTX Beta 1250 4A | |
| 2020 | DMG MORI | CTX Beta 2000 | 235000 EUR |
| DMG MORI | CTX 350 | ||
| DMG MORI | CTX beta 450 TC | ||
| DMG MORI | CTX beta 1250 TC | ||
| DMG MORI | CTX beta 1250 4A | ||
| 2003 | DMG MORI | CTX 420 L V4 | |
| DMG MORI | CTX 350 |
| 2014 | DMG MORI | CTX ECOTURN 650 | 110000 EUR | [Nov 2019] |
| 2014 | DMG MORI | CTX beta 1250/TC | 105000 EUR | [Nov 2022] |
| 2014 | DMG MORI | CTX ECOTURN 650 | 97000 EUR | [Nov 2019] |
| 2014 | DMG MORI | CTX beta 1250/TC | 34900 EUR | [Oct 2024] |
| 2009 | DMG MORI | CTX 310 ECO | 36000 EUR | [Oct 2020] |
| 2015 | DMG MORI | CTX 510 ECO | 105000 EUR | [Sep 2019] |
| DMG MORI | CTX 420 linear V3 | 46900 EUR | [Mar 2021] |
