Тип обладнання
(Кількість: > 29)
Тип обладнання
(Кількість: > 4)
Виробник:
(Категорія: 1300)
Bürkle Process Technologies 2 x model LAMVS, 1 x model LAMK presses, Machine Numbers 0145720010 and 0145720020 and 0145720180, automated PCB multilayer lamination presses designed for high throughput production with 2 x thermal-oil-heated vacuum laminating presses (LAMVS), 1 x hydraulic cold press (LAMK) for final cooling central Siemens SIMATIC PLC + HMI for line control - Please note this lot is also listed as part of lot 1 and is subject to seller conformation by Panasonic, total price for lots 25 to 41 must be greater that the price for lot 1. Auction-ID: A1-45187-25
- 8 Sections with automatic control via GPS - Clean water tank 400L - Tank 4000L - On-board computer Regular 4 - Semi continuous spraying - Hours reading 6618 - 4 wheel steering - Track width 2m20 Auction-ID: A3-43502-16311
Theoretical capacity ± 2,475 m²/hour Dimensions (L × W × H) 142 × 58 × 117 cm Working width (brushes) 55 cm Suction width (clean/dirty water intake) 80 cm Brush setup 2 brushes of 28 cm Tank capacity (clean water) 60 L Tank capacity (waste water) 60 L Weight of the machine 260 kg Maximum working speed 4.5 km/h Nominal consumption Approx. 1,000 W Voltage / Battery 24 V system (battery-powered) Noise level < 70 dB(A) Auction-ID: A1-43889-55
Extra options : Batteries from 2022 Internal charger Drive Battery Working width brushes (mm) 650 Suction working width (mm) 900 Fresh/waste water tank (l) 60 / 60 Theoretical area performance (m²/h) 3900 Practical area performance (m²/h) 2340 Battery type Maintenance-free Battery (V/Ah) 24 / 170 Battery Runtime (h) max. 3 Power supply for battery charger (V/Hz) 100 – 240 / 50 – 60 Brush speed (rpm) 180 Brush pressure (g/cm²) 26 Aisle swivel width (mm) 1650 Noise level (dB(A)) 61 Permissible total weight (kg) 300 Dimensions (L × W × H) (mm) 1540 x 900 x 1160 Max. power (W) 2100 Viewing day by appointment Auction-ID: A1-43889-43
1 battery pack consisting of: 3 GENESIS EP 16 batteries, in stock in pallet Auction-ID: A1-45003-7
Scissor lift table, 2000kg capacity, year 2019, ANR 3319 Auction-ID: A1-45187-184
Works perfectly. A jack is damaged, but will be replaced for sale Auction-ID: A3-43502-36952
-Per day approx. 100l dehumidification capacity -without condensate tank with hose outlet -1.7 KW -Relatively quiet at 67db for the power and size of the device -Air volume flow 1200 m² per hour Auction-ID: A1-45003-57
Strong and professionally deployable Renault Master light truck, ideal for transport, shipyard, delivery or conversion. Equipped with the powerful and reliable 2.3 diesel engine (125 kW) and automatic gearbox — comfortable combination for everyday use and longer journeys. Air conditioning - navigation - camera - Vehicle has a high payload of more than 1.1 tons and can tow up to 2.5 tons braked. Practical construction with rear doors and side access. Euro 6 — suitable for low emission zones. Warning: car starts with booster (battery needs to be replaced) - dashboard message: check transmission - PROS: ✔️ Powerful 2.3 diesel ✔️ Automatic transmission ✔️ Euro 6 ✔️ 3 seats ✔️ air conditioning ✔️ Towbar approved ✔️ 3500 kg GVW ✔️ 1134 kg payload ✔️ Inspection valid until 03/2026 ✔️ Immediately deployable work vehicle Notes: Signs of wear and body d ...
Contents of kitchen including fitted unit with Stainless steel sink, Zanussi microwave and fridge freezer, pigeonhole locker units, table and chairs and a Gorenje fridge. Auction-ID: A1-45187-361
1 battery pack consisting of: 3 GENESIS EP 16 batteries, in stock in pallet Auction-ID: A1-45003-20
Machine is on the 1st floor. This mobile dust extraction system from JET, type DC-1300, is an efficient and reliable solution for extracting wood dust and chips in workshops and workshops. Thanks to the compact design on a mobile chassis, the machine is easy to move and can be used flexibly with different woodworking machines. The installation is equipped with a powerful 0.75 kW motor and delivers a maximum air displacement of approx. 1300 m³/hour, which ensures effective extraction of fine dust and coarser sawdust. The collected residues are collected in a practical collection bag, while the upper filter bag ensures good filtration of the expelled air. The corresponding flexible suction hose is included and allows quick connection to machines. This example, built in 2004, is in used condition with normal signs of wear, including fabric residue and light wear appropriate for regular u ...
Scissor lift table, 2000kg capacity, year 2019, ANR 3320 Auction-ID: A1-45187-185
1x T-LED light source, pure white, with 3 W spot optic Auction-ID: A1-45187-377
Scissor lift table, 2000kg capacity, year 2019, ANR 3317 Auction-ID: A1-45187-182
Trailer load 7 t Standard tyres 2/2x Conveyor length 1.51 m Transport width 0.94 m Transport height 1.96 m Drive power 5 kW Weight 0.98 t Weight of the battery 0.515 t Battery capacity 48/300 V/Ah Wheelbase 0.965 m Turning radius 1 m Travel speed with/without load 9/15 km/h Good battery / has been tested Auction-ID: A1-43889-54
-Per day approx. 100l dehumidification capacity -without condensate tank with hose outlet -1.7 KW -Relatively quiet at 67db for the power and size of the device -Air volume flow 1200 m² per hour Auction-ID: A1-45003-73
Forced air circulating laboratory oven, 256 litres internal volume, temperature range +20° to 300°C, S/No B614.0165 Auction-ID: A1-45187-15
250.000 € 
