Equipped with leaf springing; ring towbar; Auction-ID: A1-40132-226

8 ton tipper with 10 ton chassis equipped with recently replaced tires independent tandem axles equipped with drawbar suspension estimated own weight approximately 4000 kilos works properly equipped with hydraulic drawbar leg diameter towing eye 50mm Auction-ID: A1-40132-136

Equipped with ring tow bar; air suspension; air-braked; hydraulic selectable; twistlock change system; hydraulic valve; 40 m3 cargo box Auction-ID: A1-40132-137

Auction-ID: A1-40132-219

Tipper Tipping on cardan Stored in working order Hydraulic tailgate Grranslider in the tailgate BPW axles Slow transport Auction-ID: A3-43502-19007

Equipped with K80 pull point; hydraulic brakes; 12 m3 baking capacity; Hydraulic tailgate Auction-ID: A1-40131-15

Attention, drive not connected and idler rubber damaged! — Equipped with Terra Trac track, extra tracks and original hitch included, hydraulic connections, support leg Auction-ID: A1-40131-70

No license plate Auction-ID: A1-40131-237

Equipped with: 3 point plug, jockey wheel, towing eye, lighting Auction-ID: A1-40131-207

Equipped with: three-sided tipping, rear unloading doors, lighting, PTO shaft penetration, hydraulic support leg, Dutch registration Auction-ID: A1-40131-182

Equipped with: hydraulic tip, towing eye, jockey wheel, handbrake, hydraulic connection, lighting Auction-ID: A1-40131-206

Equipped with hydraulic tailgate; feed pusher; forcibly sent; hydraulic brakes; Stainless steel bottom; Bucket size: 6.5 x 2.3 x 1.4 meters; Own Auction-ID: A1-40131-20

automatic Lubrication system, Alu chassis, Auction-ID: A1-40417-5

Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight -precise guidance of the cutting blades -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -max. for 6 cm stones -Weight: 10 kg

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Cable length: approx. 6m -Weight: 150 kg

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m -Weight: 72 kg -Functionally tested

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of vibrating bottles: 1 -Cable length: approx. 6 m -Weight: 105 kg

Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight - precise guidance of the cutting blades -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -Working length: 500 mm -Weight: 100 kg

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Engine: Hatz diesel -Frequency converter: -Vibration bottles: 2 pieces 1x vibrating bottle Ø 60 x 450 mm 1x vibrating bottle Ø 50 x 450 mm -Cable length: 6 m each -Dimensions: 1550/800/H1150 mm -Weight: 220 kg

Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Manufacturer: Wacker -Handover: as is as seen -Carriage: Impeller damaged, see photo -Motor: 2 kW -Vibrating bottle: length 430 mm -Hose length: 6 m -Dimensions: 1380/580/H600 mm -Weight: 87 kg

Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel-Manufacturer: Noggerath, hand-held concrete smoothing machine type G 700 E-E-motor: 2.0 / 1.35 kW-Plate diameter: 700 mm-Transport dimensions: 1040/780/H1300 mm-Weight: 69 kg

Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel-Manufacturer: Noggerath, hand-held concrete smoothing machine type G 950 E-Power: 2.4 kW-Plate diameter: 790 mm-Transport dimensions: 1190/1000 / H1410 mm-Weight: 87 kg

Metal detector for conveyor belts, all-metal detection system, tunnel metal detector -Manufacturer: SS Temafa, Metal Detector All-Metal Detection System -Metal detector: SS TFX 4000/440 -Detector opening: Ø 440 x 530 mm -Control: Temafa MSG 4-FF -Individual components: see photos -Dimensions: 750/530/H790 mm -Weight: 96 kg

Frequency converter, frequency transformer, converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Power: 5 kW -Output: 42 V -Frequency: 200 Hz -Dimensions: 1160/600/H740 mm -Weight: 88 kg

Joint cutter, diesel joint cutter, asphalt cutter -Saw blades: 2 -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E-Start -infinitely variable feed

Frequency converters, frequency converters, converters for bottle vibrators, vibrating bottles, internal vibrators-Frequency converter-Power: 2.8 kW-Output: 42 V-Frequency: 200 Hz-Dimensions: 1160/600/H720 mm-Weight: 74 kg

Joint cutter, asphalt cutter, concrete cutter -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Engine: Robin EH25D 8 hp -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Screed, vibrating screed, concrete trowel -electrically powered -Connection: 230 volts -Working width: 1500 mm -Dimensions: 1500/350/H450 mm -Weight: 17 kg

Joint cutter, asphalt cutter, concrete cutter -Manufacturer: Cedima, joint cutter type CF 16.1D -Saw blade: Ø max. 480 mm -Engine: Hatz E 780U 7 kW -Dimensions: 1150/680/H920 mm -Weight: 250 kg

Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel-Manufacturer: Noggerath, hand-held concrete smoothing machine type G 900 E-Power: 1.5 / 1.8 kW 1400/2850 rpm-Plate diameter: 835 mm-Transport dimensions: 1200/1000 / H1260 mm-Weight: 81 kg